Installation Instructions

Size: px

Start display at page:

Download "Installation Instructions"

Valentine Cooper
5 years ago
Views:

1 Installation Instructions CircuitView English, Version 1.0 LPKF Laser & Electronics AG Osteriede 7 D Garbsen Telefone : Telefax : lpkf@lpkf.de Homepage : http: //

2 Copyright (c) 1999 LPKF AG Distribution and reproduction of this manual and use of its content only permitted with written permission from LPKF AG. Modifications reserved. No liability is assumed for the information contained herein. In particular, we assume no liability for damages resulting from information given, information absent or erroneous information. Trademarks: HP-GL is a registered trademark of the Hewlett Packard Company. All other trademarks are registered by their owners. 2 MultiPress-II

3 Notes on this manual The information contained in this document may be modified without prior notification. No part of this document may be reproduced or transmitted for any purpose or in any form by any means, electronic or mechanical, by photocopy, by recording, or by information storage and information retrieval systems, without the express written permission of LPKF AG. We have taken great trouble to ensure the accuracy and completeness of the information in this document. However, LPKF AG accepts no liability for the use of the document, including breach of copyright or other infringement against third parties which may arise from this. The CircuitView camera option is designed for the inspection of produced boards as well as for positioning of already finished boards which no longer have alignment holes. The machine operator is under the obligation to control that the following points must be observed. It must be guaranteed that the CircuitView modification set is used according to its purpose and fitted only on ProtoMat machines of company LPKF AG. this manual is always kept in a legible condition and that it is completely available at the site of application of the machine software. the machine is operated only by sufficiently qualified and authorized personnel. this personnel knows the manual and especially the safety notes contained therein. MultiPress-II 3

4 I. Conventions used in this manual Bold text is used to emphasize important information or individual terms. Figures are numbered by a system indicating the chapter number and the illustration number. Example: Figure 5-11, Figure 11 in chapter 5. Prompts for action are identified with an arrow. Italic text is used to indicate the reactions as a result of an action. Terms from menus are printed in italics. Bold text printed in italics indicates an entry by means of the keyboard. < > indicates a key, e.g. <F4> for the control key F4. II. Notes on the symbols used Danger! This symbol is used to highlight danger to life or health. Caution! This symbol is used to identify hazards which may cause material damage. Note! This symbol refers to special information on how to avoid malfunctions and improve the system' s efficiency. IV. Target group These instructions are addressed only to persons who are familiar with the functioning and operation of ProtoMat machines of the LPKF AG. Knowledge of software programs Software BoardMaster and CircuitCam is assumed. 4 MultiPress-II

5 Application 1.0 Application The QuickView camera option is used for the inspection of milled boards. (Search for errors / Quality check) Together with the Reload function (see BoardMaster manual) it can be used for the positioning of boards, especially when the boards are already finished and need be machined again ( alignment holes no longer present). 2.0 Scope of supply 3.0 Safety notes 1 x Software-License QuickView 1 x IS-Falcon Frame Grabber Card 1 x CCD Miniature camera 1 x Steel-knurled screw 2 x Screw M4 x 8 1 x Wire connection for CircuitView 1 x Adapter BNC - Cinch 1 x Holder for camera 5 x Wire-strips short bl. This manual Danger! In order to ensure safe working with the system the user must have read this manual as well as the documentation supplied and especially the safety notes printed in bold! Take care that only personnel having received instructions is working at the machine. If you modify the equipment yourself, the equipment s safety can no longer be guaranteed, and no guarantee claims can be accepted. Keep the workplace tidy. Please also take note of the safety precautions of the documentation for the ProtoMat machine included in the supply. MultiPress-II 5

6 Installing the Frame Grabber Card in the PC 4.0 Installing the Frame Grabber Card in the PC First of all install the Frame Grabber Card supplied with the delivery in the PC. The corresponding software must also be installed. These steps are not described here. For that description please see the manual of the frame grabber card included in the supply. 5.0 Mounting the camera Fig. 5-1: Connections of the installed frame grabber card 1. BNC connecting socket 2. Sub-D-9pin socket 3. Hosiden-socket 4. Cinch-socket 5. Cinch-socket 6 MultiPress-II

7 Mounting the camera Execute the different working steps in the given order: Install the frame grabber card in the corresponding computer. (See enclosed original manual of Falcon/Eagle - Frame Grabber Card) Install the supplied software on the corresponding computer. (See enclosed original manual Falcon/Eagle - Frame Grabber Card) Connect the Sub-D connector of the LPKF special line (9pin. Sub-D - BNC+Cinch) to the socket (No.2 in fig. 5-1). Connect the Cinch socket (No.5 in fig.5-1) with the BNC-socket (No1 in fig. 5-1). To do this, use the green BNC BNC line as well as the BNC -- Cinch adapting connector (included in the delivery). Fix the camera holder with two Allen screws at the milling head (see following fig.). There are two screw borings provided at the milling head. Fig. 5-2: Camera holder Fix the camera on the camera holder using the knurled screw (see following fig). MultiPress-II 7

8 Mounting the camera Fig. 5-3: Mounted and fixed camera Connect the power supply and the signal line to the camera (see following fig.). Fig. 5-4: Camera installed Fix the lines to the extraction hose of the milling head by means of cable clips. 8 MultiPress-II

9 Mounting the camera 5.1 Focus adjustment If this has not yet been done, install the QuickView program on your computer. The installation instructions for this software can be found in the README file on the program disk. Start the QuickView program. Start the BoardMaster program. Put the underlay material as well as the base plate to be machined onto the machine base plate. Traverse the milling head to a free spot above the basic material. Loosen the knurled screw on the camera just so much that the camera can be moved. The height of the camera must be adjusted so that a clear image can be seen on the QuickView monitor. Tighten the knurled screw again when the image is clear. Attention: The focus must be readjusted when the material thickness is changed! Note: For the position adjustment the cross hairs circle in QuickView must be adjusted. To do this, click on the button (see following figure) and the cross hairs appear. Fig. 5-5: QuickView-Button (cross hairs) The diameter of the cross hairs circle can be changed using the and keys. The total area represented in the QuickView window is about 10 x 8mm. MultiPress-II 9

Offset adjustment of the camera 6.0 Offset adjustment of the camera Make sure that the machine is adjusted correctly. Switch on the circuit board plotter.

10 Offset adjustment of the camera 6.0 Offset adjustment of the camera Make sure that the machine is adjusted correctly. Switch on the circuit board plotter. Start programs BoardMaster and QuickView on your computer Now insert the drilling tool (about 1mm) into the spindle. Attention: the milling head must now be traversed to the zero point. Make sure that the zero is not on the position of an alignment hole, as you cannot drill a hole there, and may cause considerable damage to the machine. Drill a hole into the basis material exactly on the zero point. Traverse the milling head such that the hole which has been drilled previously becomes visible in the QuickView monitor. Now move the milling head slowly until the hole is exactly in the cross hairs or cross hairs circle, respectively. Choose menu - configuration/heads - and click on light spot/camera - afterwards on Origin". (See following fig.) Then click on OK. Note: When you double-click on the QuickView camera image on the monitor it will remain in the foreground. Now click on light spot/camera" in the configuration/heads menu and afterwards on head". Exit the menu by clicking on OK. The camera is now adjusted. 10 MultiPress-II

3M Locator Plate N

3M Locator Plate N M Locator Plate 44-107N Instructions for the assembly of.100 x.100 preassembled socket connectors 1.0 General The M Locator Plate 44-107N is designed to aid in the assembly of the preassembled socket connector