LTR DESCRIPTION PART NO X Y Z F 004ABV. Vito Battery. F 40CBJV (1 Port) Pro Style Lifts. Vito Control Box F 044CHV. Vito Charger

Transcription

1 PARTS IDENTIFICATION LINAK REPLACEMENT ELECTRONICS LTR DESCRIPTION PART A Linak Battery F 004AB B Linak Charger F 044CH C Linak Control Box (1 Port) F 40CBJ (1 Port) Pro Style Lifts D Linak Control Box (2 Port) F 41CBJ (2 Port) Rotation Lifts E Linak 1 Port Hand Set F 100JH (All Pro Style Lifts) (Use Vito handsets) F Linak 1 Port Hand Set F 101JH (Power EZ Lifts) Note Arrow Directions (Use Vito s) G Linak 2 Port Hand Set F 104JH (All Rotational Lifts) (Use Vito Handsets) VITO REPLACEMENT ELECTRONICS LTR DESCRIPTION PART V Vito Battery F 004ABV W X Y Z Vito Control Box Vito Charger Vito 1 Port Hand set Vito 2 Port Hand set F 40CBJV (1 Port) Pro Style Lifts F 41CBJV (2 Port) - Rotation Lifts F 044CHV F 100JHV (Pro Style Lifts) (Works with Linak Electronics) F 104JHV (Rotational Lifts) (Works with Linak Electronics)

2 PARTS IDENTIFICATION REPLACEMENT ACTUATORS & COMPONENTS L M N Q LTR DESCRIPTION PART L Actuator for Pro, Patriot, Portable Pro, PowerEZ EZ, Super PowerEZ EZ, ProXR XR, F 799RA ( ) 00) Ambassador, Revolution & Titan Lifts M *Universal Actuator Frame UHF (Req.1ea Appropriate Bracket Kit below) N O *Universal Actuator Frame Bracket Adapter Kits (4 different ones) *Actuator for Ranger Lift *Actuator for Scout, Spa Elite and Ultra *Actuator for Power EZ 2 **Actuator for Pathfinder F ABK (Pro XR/Ambassador) (XD) F DBK (Pro Pool Deep Draft, Portable Pro, Patriot) (PD) F PBK (Standard Pro Pool) (PP) F RBK (Ranger) (RV) F 492DAA (VT mm Pull) F 490VA4H (VT mm Push) (VT mm Push) (Can also work on PEZ) (VT mm Pull) P EZ Lift Hydraulic Actuator F 03EZCYL Q *Ranger/Scout Integrated Controls DISCONTINUED Replace with Electronic Upgrade Kits F 830 for Scout or F 409CBKV for Ranger *Refer to Ranger Actuator Replacement Tech Sheet for more info **Refer to Pathfinder Actuator Replacement Tech Sheet for more info

3 PARTS IDENTIFICATION ROTATION MOTOR & GEAR KITS R s T U LTR DESCRIPTION PART R Scout Base Gear Kit F SBGR S Revolution/Titan Base Gear Kit F RVGRKT T Scout Rotate Motor F SRMR U Revolution/Titan Rotate Motor F RRMR SPECIALTY SERVICE TOOLS 1ea F 01TL Test Light Use to test for defective control boxes and/or hand sets. Refer to Test Light Manual for specific instructions. 1ea F VTC002 Vito Test Cable Use to test for defective Vito Batteries. Typically included with the lift that has Vito Controls. Refer to Lift Manual for proper instructions.

4 Ranger* Lift Actuator Replacements Linak Actuator? F 799RA (Actuator If can remove from frame) ELSE UHF (Universal actuator frame) 1x F RBK (Bracket Kit) 1x F 492DAA (Actuator) 1x Vito 10kN Actuator? F 492DAA (Actuator) 1x Derock 6kN Actuator? Linak Integrated Controls? Need to upgrade all electronics F 492DAA (Actuator) 1x F 409CBKV (Electronic Upgrade Kit Vito) 1x UHF (Universal Actuator Frame) 1x F RBK (Bracket Kit) 1x F 490VA6L (Direct Replace) )1x Limited to Qty on hand ELSE: F 492DAA (Actuator) 1x UHF (Universal actuator frame) 1x F RBK (Bracket Kit) 1x * For Ranger EU (CE) Lifts see Pro Pool Lift

5 Pro Pool Lifts Actuator Replacements (Includes Ranger EU) Can Remove Actuator from Frame? F 799RA (Actuator) t 1x UHF (Universal actuatorframe) 1x F PBK (Bracket Kit) 1x Standard Draft? UHF (Universal Actuator frame) 1x F DBK (Bracket Kit) 1x Deep Draft?

6 Pro Pool XR / Ambassador Lifts Can Remove Actuator from Frame? UHF (Universal actuator frame) 1x F ABK (Bracket Kit) 1x

7 Patriot & Portable Pro Pool Lifts Can Remove Actuator from Frame? UHF (Universal actuator frame) 1x F DBK (Bracket Kit) 1x

8 TECH SHEET PATHFINDER ACTUATOR REPLACEMENT Actuator attachment point is below vertical support arm of base. Actuator Replacement Part No. F 490VA4L (Discontinued Not Available) See Customer Service For Options Actuator attachment point is even with top of vertical support arm of base. Actuator Replacement Part No s. F 490VA4L (Discontinued Not Available) VT mm Pull

9 PRE AT1 BASE PLATE The Anchor pattern is offset by 3/4 from front to back and the pattern is as follows: Side to Side pattern (Center to Center) = 11.5 Front to back (Center to Center) = 16.5 AT1 BASE PLATE There is offset of the anchor pattern, it is in a square. The pattern is as follows: Side to Side pattern (Center to Center) = 10 Front to back (Center to Center) = 11 *Adapt AT1 base to Pre AT1 installed anchors Use F 04ATAP Adapter Plate Tech Sheet Pre AT1 vs. AT1 Base 2/22/17 Aqua Creek Products LLC