The contacts in the Top Cap are adjustable to both directions, so your atomizers will sit flush with the top cap and your batteries will not rattle!
|
|
- Myrtle Paul
- 5 years ago
- Views:
Transcription
1 The Nanos is our smallest mechanical battery mod to date ( Nanos is Greek for Dwarf) that incorporates our revolutionary Nanos-Magnetic-Technology Bottom Button. The contacts in the Top Cap are adjustable to both directions, so your atomizers will sit flush with the top cap and your batteries will not rattle! The outer diameter of the device is 22.6mm The Nanos comes default with Rhodium Plated Contacts and Peek Ketron Plastics installed. The Nanos is an all mechanical mod, which means that users will have to occasionally clean the device s contacts to ensure that it performs at maximum efficiency! Top cap is for all genesis devices and other devices that are not bottom air fed. Be advised that the Nanos is not suitable for setups below 0.5 ohm! This has to do with the magnets in the switch, if the magnets get over 120 degrees Celsius (248 Fahrenheit) they will lose their magnetic properties. This product is available in a wide variety of possible setups for all 18xxx battery sizes (Length: 83 mm) (Length: 68 mm) (Length: 53 mm) 1
2 Nanos User Manual Contents Overview of the Parts Overview of the Extra and Optional Parts Description of the parts Battery Tube Choices Description of the Optional Parts Diagram of Total assembly Compatibility with Poldiac Parts Maintenance
3 Overview of the parts Parts needed for assembly: Item No. Quantity Description Top Cap 2 1 Top Connector Plastic Nanos Positive Pole Base Nanos Positive Screw 5 - Variety of Tube choices Nanos Button 5 6 3
4 Overview of the Optional Parts Optional Parts Item No. Quantity Description 7. - Poldiac to Nanos Adapter 7 4
5 1: Top Cap Top Cap The Top Cap is available in Polished SS, Satin SS or Brass Features: 510 threading for the use of 510 atomizers. Threading on the inside for assembly of the Top connector plastic. The top cap attaches to the Battery tube. The top cap is not vented so it cannot be used with bottom air fed atomizers. 5
6 2: Top connector plastic Top connector plastic The Top connector plastic comes in Peek Ketron Features: Threading on the outside for assembly into the Top end cap. Threads on the inside to facilitate the Nanos Positive Pole Base. Grooves on top to facilitate the use of a screwdriver. 6
7 3: Nanos Positive Pole base Nanos Positive Pole base The Nanos Positive Pole Base comes in Rhodium over Silver Plated Brass Features: Reverse threading Groove on the top to facilitate the use of a screwdriver. Threads on the outside for inserting into the Top Connector Plastic. Threads on the battery side to facilitate the Nanos Positive Screw. Space on the battery side to facilitate a spring instead of the Nanos Positive Screw. The Nanos Positive Pole Base can be screwed in or out to adjust for the length of the 510 connection on the atomizer. The Nanos comes with the Nanos Positive Pole Base and Nanos Positive Screw installed by default. However customers will have the option to change the Nanos Positive Screw for a spring if they so desire. 7
8 4: Nanos Positive Screw Nanos Positive Screw The Nanos Positive Screw comes in Rhodium over Silver Plated Brass Features: Reverse threading Groove on the top to facilitate the use of a screwdriver. Threads to be able to attach it to the Nanos Positive Pole Base. The Nanos Positive Screw can be screwed in or out to adjust for the length of the battery. Please note the reverse threading, this is done so that when you put your battery in the screw will not get loose and will always make the best contact. 8
9 5: Battery Tube Choices Battery Tube Choices With the Nanos you have a wide variety of choices when it comes to the battery compartment of your Nanos. All the parts are available in Polished SS, Satin SS, or Brass The following tubes are available: - Connector Tube - Extension Tube Single tube Single tube Single tube 9
10 5: Battery Tube Choices - Overview Battery Tube Choices The following combinations are available for the battery compartment of your Nanos. All the parts are available in Polished SS, Satin SS, or Brass x Tube 1 x Tube 1 x Tube 1 x Connection Tube + 2 x Extension Tube 1 x Connection Tube + 3 x Extension Tube 1 x Connection Tube + 4 x Extension Tube 1 x Tube + 1 x Extension Tube 1 x Tube + 2 x Extension Tube 1 x Tube + 1 x Extension Tube 10
11 5: Battery Tube Choices - BTO Battery Tube Choices There is a big choice of complete Nanos devices ready available on our website, but you can also assemble your own Nanos, for this you will need the following: 1 x Full Top end cap for Nanos 1 x Full Button for Nanos Tube or combination of tubes for the size of battery you want. (see previous slide) 11
12 6: Nanos Button Nanos Button The Nanos Button is available in Polished SS, Satin SS or Brass Features: Magnetic push button Magnetic locking system Our logo and the serial number engraved Rhodium plated contacts Only 7 mm tall with less than 3 mm sticking out of the tube. The Nanos bottom button is one of the shortest bottom push bottoms on the market to date. It incorporates our revolutionary Nanos-Magnetic-Technology for both the operation of the device and the locking system. Be advised that the Nanos is not suitable for setups below 0.5 ohm! This has to do with the magnets in the switch, if the magnets get over 120 degrees Celsius (248 Fahrenheit) they will lose their magnetic properties. 12
13 7: Poldiac to Nanos Adapter Poldiac to Nanos Adapter The Poldiac to Nanos Adapter is available in Polished SS, Satin SS and Brass This Poldiac to Nanos Adapter can be used together with the Full Button for Nanos to transform an existing Poldiac into a Nanos. 13
14 Diagram of total assembly An overview of the Nanos with a single battery tube. 14
15 Parts Compatibility with Poldiac Parts From your existing Poldiac you will need the following parts: - Pants - Battery Tube - Top Connector Plastic - Negative Pole Plate (extra s bag) - Spring - Top Cap 15
16 Parts Compatibility with Poldiac Parts To transform your Poldiac to Nanos you will need the following parts: - Poldiac to Nanos Adapter - Full Button for Nanos 16
17 Parts Compatibility with Poldiac Parts You put the button together like you would for the Poldiac in the bottom button configuration: Then add the Nanos Button to the Bottom of your Poldiac Battery tube, put the pants over the tube and add the Poldiac to Nanos adapter, finally add the assembled Top Cap: 17
18 Maintenance The Nanos is an all mechanical mod, which means that users will have to occasionally clean the device s contacts in order to ensure that it performs at maximum efficiency! Besides the contacts it is also important to keep all the threads on the battery unit clean as they are also part of the complete electrical circuit. Cleaning the contacts can easily be done with a bit of baking soda, either rubbing the baking soda and contacts in your hands or putting baking soda and hot water plus the contacts in a bowl and let them sit for a while. If needed use a fine brush like a toothbrush to clean the threads. Do NOT use any sort of cleaning paste on your Rhodium contacts! Cleaning the threads can be done by using just a cloth or using special cleaning materials for either Stainless Steel or Brass depending on the material of your Nanos. Or as Hlias says: Don t mess with your Nanos, he may be small but he is powerful and he has a lot of powerful friends: Ori, Dis, Thorin, Telchar, Loni, Nar, Farin, Bifur, Gloin, Durin, Kili, Thror, Nali, Mim, 18 Fili, Dain, Gimli, Nori
choice of types to suit many applications, from simple containers, toolboxes, industrial canister type vacuum cleaner, insulation
Solutions Inc. TL-7800 Line The DFCI TL-7800 Line of Toggle Latches offers the designer a wide choice of types to suit many applications, from simple containers, toolboxes, industrial canister type vacuum
More informationModulate Magnetic Kit 10-07
Modulate Magnetic Kit 10-07 MOD-10-07-M MOD-10-07-M-OCE Modulate Fabric Banner kits feature unique angles and shapes, are portable and now are even easier to configure to achieve your dream space! Modulate
More informationModulate Magnetic Kit 10-01
Modulate Magnetic Kit 10-01 MOD-10-01-M MOD-10-01-M-OCE Modulate Fabric Banner kits feature unique angles and shapes, are portable and now are even easier to configure to achieve your dream space! Modulate
More informationwww.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
More informationCoyote popup display set up instructions
Coyote popup display set up instructions Frame 1 2 3 Prepare frame for assembly by locating the purple hooks on top of the frame. Stretch frame to size, snapping magnetic locking arms together. Attach
More informationDLMP-45/45R Installation Instructions
DLMP-45/45R Installation Instructions Tools Needed Posidrive No.3 Screwdriver Large Flat Head Screwdriver 2x 10mm Spanner 1x 13mm Spanner Ø8mm Drill Ø6mm Drill Kit Contents [ ] 1x Tube 2.5M long 17420
More informationPanel-Mounted Thermostat
Data Sheet 602026 Page 1/7 Panel-Mounted Thermostat EM Series Special features Safety temperature monitor STW (STB) Safety temperature limiter STB Tested according to DIN EN 14597 and PED 2014/68/EU Brief
More informationapple Service Source Apple Cinema HD Display 23" LCD (ADC) 11 April Apple Computer, Inc. All rights reserved.
apple Service Source Apple Cinema HD Display 23" LCD (ADC) 11 April 2003 2003 Apple Computer, Inc. All rights reserved. apple Service Source Take Apart Apple Cinema HD Display 23" LCD (ADC) 2003 Apple
More informationInductive linear position sensor LI300P0-Q25LM0-LIU5X3-H1151
Rectangular, aluminium / plastic Versatile mounting possibilities LED indicates measuring range Immune to electromagnetic interferences Extremely short blind zones 12 bit resolution 4-wire, 15 30 VDC Analog
More informationCheck what you have received against the component checklist and hardware above.
SA46S SA46W SA46B SA46PB Component Checklist Installation Instructions SYSTEMA Systema Monitor Arm 460mm HARDWARE Display Mounting Spacers (x4) Display Mounting Screws Arm Assembly VESA monitor head M4
More informationInstruction manual. KUZMA 4POINT 14 inch TONEARM Serial Number:
Instruction manual KUZMA 4POINT 14 inch TONEARM Serial Number:.. 2016-09 1 KUZMA LTD INSTRUCTION MANUAL FOR 4POINT 14 tonearm The 4POINT 14 tonearm is a very precisely engineered piece of equipment, however,
More informationSTX Stairs lighting controller.
Stairs lighting controller STX-1795 The STX-1795 controller serves for a dynamic control of the lighting of stairs. The lighting is switched on for consecutive steps, upwards or downwards, depending on
More informationInductive sensor. 2-wire, analog output BI8-M18-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M18 x 1 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring diagram Type code Ident no.
More informationBionic Elephant Trunk. Assembly Instructions
Bionic Elephant Trunk Assembly Instructions Equipment and Supplies Required items from the Bionics Kit and/or Materials Pack: 1. Tail fin (small) assembled 2 see Start Here for tail fin assembly instructions
More informationHQ Electromagnetic Channel Locks. For the HQ Infinity
HQ Electromagnetic Channel Locks For the HQ Infinity Table of Contents Overview... 2 Kit Contents... 2 Tools Required... 4 Installation... 4 Using the HQ Electromagnetic Channel Locks... 9 Troubleshooting...
More informationA449-6S 70 CENTIMETER FM YAGI ANTENNA MHz
ASSEMBLY AND INSTALLATION A449-6S 70 CENTIMETER FM YAGI ANTENNA 440-450 MHz COMMUNICATIONS ANTENNAS 951425 (7/93) WARNING THIS ANTENNA IS AN ELECTRICAL CONDUCTOR. CONTACT WITH POWER LINES CAN RESULT IN
More informationTeamWork Installation Guide
C G G 00-0V/ A MAX TX RX +V APARATUS US 0 TeamWork Installation Guide TeamWork TeamWork is a fully customizable collaboration system comprised of an switcher, Show Me cables, a control processor, and a
More informationOptical Distribution Box 300 Installation Guide. Version : R0.0
Optical Distribution Box 300 Installation Guide Document No. : OD16-546-L-01 Version : R0.0 Date: 21-Mar-2018 IMPORTANT INSTRUCTIONS When using fiber optic equipment, basic precautions should always be
More informationA CENTIMETER FM YAGI ANTENNA MHz
ASSEMBLY AND INSTALLATION A449-70 CENTIMETER FM YAGI ANTENNA 440-450 MHz COMMUNICATIONS ANTENNAS 951424 (10/91) WARNING THIS ANTENNA IS AN ELECTRICAL CONDUCTOR. CONTACT WITH POWER LINES CAN RESULT IN DEATH
More informationapple Service Source Apple Studio Display 17" LCD (ADC) Updated 6 Decenber Apple Computer, Inc. All rights reserved.
apple Service Source Apple Studio Display 17" LCD (ADC) Updated 6 Decenber 2004 2003 Apple Computer, Inc. All rights reserved. apple Service Source Take Apart Apple Studio Display 17" LCD (ADC) 2003 Apple
More information3M Distribution Box (DDB)
3M Distribution Box (DDB) Merged Copper and Fiber Pole/Post Mount Enclosure Installation Instructions November 2015 78-0015-2736-1-A 2 November 2015 78-0015-2736-1-A Contents 1.0 General 2.0 Enclosure
More informationM2 Antenna Systems, Inc. Model No: 23CM35
M2 Antenna Systems, Inc. Model No: 23CM35 SPECIFICATIONS: Model... 23CM35 Frequency Range... 1250 To 1300 MHz *Gain... 20.94 dbi Front to back... 25 db Typical Beamwidth... E=17 H=18 Feed type... Folded
More informationUnipole and Multipole Connectors
Unipole and Multipole Connectors Miniature Cylindrical Connectors With Push-Pull-Locking Shenzhen Medplus Connector Co.,Limited. 2 th Floor,Ming An Street,GongMing Town, Baoan District, Shenzhen, China
More informationAssembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door
CHAPTER 8 Assembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door July 13, 2012, This document provides you with the procedures you perform to assemble and mount the
More informationMedium Box for Cable Termination
FIST-MB2-T I N S T A L L A T I O N I N S T R U C T I O N Medium Box for Cable Termination Contents 1 Introduction 1.1 Product description. 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre assembling
More informationGEM Systems Magnetism Survey Tutorial Colton Dudley
GEM Systems Magnetism Survey Tutorial Colton Dudley ***GEOPHYSICS IS ABOUT CONSISTENCY*** ***READ THROUGH EVERY PARAGRAPH*** ***REMOVE ALL BELONGINGS THAT MAY POSE A MAGNETIC THREAT TO THE SURVEY (METALS)***
More informationGrowmaster Assembly Instructions
Growmaster ssembly Instructions Item No. Part Sect. Ref. Size mm Quantity Item No. Part Sect. Ref. Size mm Quantity 1001 15 M6 x 12 86x 97x 108x 1067 6 295 16 M6 9 10 113x 1301 7 30 9x 1 13x 5 7 3.5 x
More information1-Touch Vibratory Sieve Shaker SS-10
1-Touch Vibratory Sieve Shaker SS-10 Safety Instructions WARNING!! This machine operates on electric current. Improper operation could result in electrical shock, electrocution, or an explosion! 1. ALWAYS
More informationDLMP Installation Instructions
DLMP Installation Instructions Tools Needed Posidrive No.3 Screwdriver Large Flat Head Screwdriver 2x 10mm Spanner 1x 13mm Spanner Ø8mm Drill Ø6mm Drill Kit Contents [ ] 1x Tube 2.5M long 17420 [ ] 2 x
More informationNanoStructure 6U. Datasheet 6U structure for nano-satellites
NanoStructure 6U Datasheet 6U structure for nano-satellites 1 Table of Contents 1 TABLE OF CONTENTS... 2 2 OVERVIEW... 3 2.1 HIGHLIGHTED FEATURES... 3 3 STRUCTURE FRAMES AND CORNER BRACKETS... 4 3.1 KILL
More informationPanel-mounting Thermostats EM Series
Postal address: 3603 Fulda, Germany Phone: +44 279 6333 Fax: +44 279 63262 Phone: 3-697-JUMO -800-4-JUMO Fax: 3-697-867 Page /2 Panel-mounting Thermostats EM Series with, 2, 3 or 4 single-pole snap-action
More informationInstalling iphone 3G Display
Tools used in this guide Phillips #00 Screwdriver (1) Small suction cup (1) Spudger (1) Parts relevant to this guide iphone 3G Display (1) Cracked or faulty display? Replacing the glass is somewhat involved
More information3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes
FIST-GCOG2-Dx24 I N S T A L L A T I O N I N S T R U C T I O N FTTH closure for micro-tubes and micro-cables Content 1 Introduction 2 Kit content 3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx24
More informationI Ex-protected connectors exlink I
Y-Junction-box Technical data Y-Junction-box / Marking to 94/9/EC II 2 G Ex de IIC T6/T5 / II 2D Ex td A21 T80 C/ T95 C EC-Type Examination Certificate PTB 05 ATEX 1084 IECEx-Certificate of Conformity
More informationFIST-GCOG2-Dx6. Follow all local safety regulations related to optical fiber plant elements.
FIST-GCOG2 I N S T A L L A T I O N I N S T R U C T I O N TC-986-IP Rev A, Mar 2017 www.commscope.com FIST-GCOG2-Dx6 Content 1 Introduction 2 General 2.1 Abbreviations 2.2 Kit contents 2.3 Tools 2.4 Accessories
More informationFile E Project 01NK7526. April 4, 2001 REPORT TELEMETERING EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS. Metrix Instrument Co.
File E139529 Project 01NK7526 April 4, 2001 REPORT on TELEMETERING EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS Metrix Instrument Co. Houston, TX Copyright 2001 Underwriters Laboratories Inc. Underwriters
More informationCabling and Completing Assembly of the Cisco TelePresence System 1000
CHAPTER 5 Cabling and Completing Assembly of the Cisco TelePresence System 1000 Revised: April 5, 2010, Introduction This chapter describes how to set up and connect the cables, microphone and Cisco Unified
More informationFOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N
FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N In-line and butt version Cold applied re-usable fiber optic closure Contents 1 Introduction 1.1 Product description 1.2 Capacity 2 General
More informationCoyote popup features
Coyote popup features The Coyote popup display system combines strength, reliablility, and style in a lightweight and easy to use system. It is fully magnetic, making it simple to assemble and disassemble,
More informationInstrument Care. Band. Instruction Pack. Print and hand out! Instruments:
Band Instrument Care Instruction Pack Print and hand out! Instruments: Flute Oboe Bassoon Clarinet Saxophone Trumpet French Horn Trombone Euphonium Tuba Percussion Easy-to-read Pictures included!! Before
More informationBimetal Temperature Switch
Phone: +44 19 635533 Fax: +44 19 635262 Data sheet 608301 Page 1/8 Bimetal Temperature Switch Special features Electromechanical temperature switch with a fixed switching temperature Protection type IP52,
More informationFIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays
FIST-MB2-S I N S T A L L A T I O N I N S T R U C T I O N FIST Medium Box for Cable Splicing Only Contents 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents 3 Installation and
More informationOrder #XXXXX - ECO x10 Inline Display. Setups. 10 Plan View
Order #XXXXX - ECO-054-0 x0 Inline Display Setups 0 0 Plan View 7A General Setup Instructions The setup instructions are created specifically for your configuration. Setup instructions are laid out sequentially
More informationMaterials: Programming Objectives:
Lessons Lesson 1: Basic Chassis Overview TETRIX Getting Started Guide In this lesson, users will learn how to use the elements of the TETRIX system that will be involved in building the basic chassis of
More informationASSEMBLY AND INSTALLATION 3 ELEMENT 6 METER BEAM
ASSEMBLY AND INSTALLATION A50-3S 3 ELEMENT 6 METER BM COMMUNICATIONS ANTENNAS 951364 (12/94) WARNING THIS ANTENNA IS AN ELTRICAL CONDUCTOR. CONTACT WITH POWER LINES CAN RESULT IN DTH, OR SERIOUS INJURY.
More informationTHE AMBER COMPUTER VDU PROJECT.
THE AMBER COMPUTER VDU PROJECT. H. Holden. April. 2019. BACKGROUND: Of the vintage small cathode ray tube VDU s or video monitors, the one that has impressed me the most, is the one manufactured by Zenith
More informationSPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment
1993 Specifications CSJ 0500-01-117 SPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of Fiber Optic Video
More informationSTRAND LIGHTING 200F 7-INCH TUNGSTEN LED TELEVISION FRESNEL SPECIFICATION.
STRAND LIGHTING 200F 7-INCH TUNGSTEN LED TELEVISION FRESNEL SPECIFICATION. GENERAL. A.) Overview. 1) The Television Fresnel fixture shall be purpose designed for television and studio lighting applications.
More informationD-SUB ACCESSORIES OSSI : CONNECT TO EXCELLENCE D-SUB ACCESSORIES CATALOGUE / EDITION 04 CONNECTORS, PARTS AND EXCELLENCE SINCE 1974
D-SUB ACCESSORIES OSSI : CONNECT TO EXCELLENCE D-SUB ACCESSORIES CATALOGUE / EDITION 04 CONNECTORS, PARTS AND EXCELLENCE SINCE 1974 Notes Supply and Service Ossi Connectors A/S is a leading supplier in
More informationFiber Optic Splice Closure GPJ Instruction Manual
Fiber Optic Splice Closure GPJ09-9401 Instruction Manual 1. Brief Introduction GPJ09-9401 type of Fiber Optic Splice Closure is a member in dome series, the main function is to provice direct pass, branch
More informationIdentification - electrical services
Identification - electrical services Aesthetic All live phase cable sheathing to be brown coloured and neutral phase cable sheathing to be blue coloured, all labelled L1, L2, L3 & N respectively in accordance
More informationAll-Glass Sliding-System SF20
Profile system All-glass sliding system Bottom loaded/running construction Option of flush or weathered bottom track The flush bottom track is particularly suitable for use in barrier-free dwellings according
More informationThe Two Assemblies. Standard Assembly For signs up to 11" wide. Pull flexible lens directly outward with Sucton Cup Tool for lens removal
System Overview The Two Assemblies The Arris system is comprised of two unique assemblies, each designed to provide maximum cost effectiveness and design flexibility for specific types of signs. With both
More informationimac Intel 20" EMC 2133 and 2210 LCD Backlights (CCFL) Replacement
imac Intel 20" EMC 2133 and 2210 LCD Backlights (CCFL) Replacement The CCFL back lights are replaceable. I have pulled mine apart and documented my method. '''NOTE''' This is not for the feint hearted!
More informationAll-Glass Sliding-System SF20
Profile system All-glass sliding system Bottom loaded/running construction Option of flush or weathered bottom track The flush bottom track is particularly suitable for use in barrier-free dwellings according
More informationThe Haply Development Kit
The Haply Development Kit Introduction The Haply development kit is a robust and adaptable open-source hardware development platform for haptic applications. Designed to be accessible to novices and experts
More informationCME500 SERVICE PARTS
This section contains the parts illustrations and parts lists for the CME500. CME500 ice machines are manufactured in both 115 volt, 60 cycle and 220 volt, 50 cycle. When ordering electrical parts, be
More informationInductive sensor With analog output BI15-M30-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M30 x 1.5 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring Diagram Type designation
More informationSERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency
1 Size SERIES 400 x SERIES x Operating distance mm 0.8 0.8 1. Housing material Connection 1) PUR cable type 1 PUR cable type 1 / Connector S8 PUR cable type 1 Degree of protection Mounting Max. switching
More informationDREAMOC DIAMOND 4K - ASSEMBLY GUIDE VERSION ORIGINAL ASSEMBLY GUIDE
DREAMOC DIAMOND 4K - ASSEMBLY GUIDE VERSION 1.2 - ORIGINAL ASSEMBLY GUIDE It is important to read this assembly guide before using the Dreamoc Diamond, and to follow advices and instructions on safety,
More informationSECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
More informationTeamWork Kits Installation Guide
TX 0 RX COM +5V APARATUS US TeamWork Kits Installation Guide TeamWork 400 and TeamWork 600 Kits The TeamWork 400 and TeamWork 600 kits consist of an HDMI switcher, system controller, Cable Cubby, and cables
More informationRSL MusicPower Plug-In Installation Manual For Naim NAC 72 Preamp
RSL MusicPower Plug-In Installation Manual For Naim NAC 72 Preamp (Updated to reflect the adjustable gain output boards Z200V) www.ryansoundlab.com RSL MusicPower Plug-In Installation Manual for Naim NAC
More informationElectric Motorized Projection Screen PowerMax Tension Series
Electric Motorized Projection Screen PowerMax Tension Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen
More informationTips to disassemble your TF300. Will hopefully help you not make a couple of the mistakes I did. Written By: B0NK3R5
Disassembling Asus Transformer Pad TF300 Tips to disassemble your TF300. Will hopefully help you not make a couple of the mistakes I did. Written By: B0NK3R5 ifixit CC BY-NC-SA www.ifixit.com Page 1 of
More informationAutomatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces
Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................
More informationInstructions for WiP Relay Block Kit
Instructions for WiP Relay Block Kit So you re working on a larger-than-normal electrical project? That s what this relay kit is offered for (it s also for use with the regular project that you may add
More informationPowerBook G4 Aluminum 12" GHz LCD panel upgrade
PowerBook G4 Aluminum 12" 1-1.5 GHz LCD panel upgrade Upgrade a 1400x1050 LCD panel. Written By: martin ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION The original LCD 1024x768 resolution
More informationULTRA-VANSTAT WIRELESS PROGRAMMABLE THERMOSTAT FOR CARAVANS
ULTRA-VANSTAT WIRELESS PROGRAMMABLE THERMOSTAT FOR CARAVANS NOT SUPPLIED PROGRAMMER / TRANSMITTER RECEIVER THIS DOMESTIC STYLE WIRELESS 7 DAY PROGRAMMABLE HEATER CONTROL REPLACES THE TRUMA ULTRAHEAT SWITCH
More informationAPPLICATIONS. Automatic warehouse. Trasportation lines
INDUCTIVE TUBULAR SENSOR M8 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More informationCaution. Hanging the Screen:
Installation Instructions for Laminar and Laminar XL Projection Screens Caution 1. Read Instructions through completely before proceeding; keep them for future reference. Follow these instructions carefully.
More information3M Locator Plate N
M Locator Plate 44-107N Instructions for the assembly of.100 x.100 preassembled socket connectors 1.0 General The M Locator Plate 44-107N is designed to aid in the assembly of the preassembled socket connector
More informationCOMPONENTS & COMPONENTS & ACCESSORIES
COMPONENTS & Accessories 135-145 135 COMPONENTS & ACCESSORIES REMOTE CONTROL 137-138 SOAP DISPENSERS 138 MIXING VALVES 139 SOLENOID KEY 140 REMOTE CONTROLS PERFECT TIME CONTROL ASSEMBLY 140 COVER PLATE
More informationPanel-mounting thermostats, type series EM
Data sheet 602025 Page /5 Panel-mounting thermostats, type series EM Particularities Operating temperature limiter Limit value range up to +650 C with temperature compensation Brief description Panel-mounting
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 75 OHM AND 75 OHM HD COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT
More informationCheck what you have received against the component checklist and hardware above.
SSS SSPW SSW SSPB SSB Component Checklist Installation Instructions SYSTEMA Systema Monitor Spring Arm HARDWARE Display Mounting Spacers (x4) 3/4mm Allen Keys Display Mounting Screws M4 x 14mm (x1) Silver
More information1 Inductive proximity switches. 5 Connecting cables. Highlights: New:
Highlights: - All-metal housings - Miniature sizes - Long operating distances - Extreme environmental conditions - Analog outputs New: - All-metal devices for food industry and sea-water applications -
More informationSBL /SBLG Series Wireless Clock
Installation Manual V8.3 SBL /SBLG Series Wireless Clock Current as of August 2018 The Sapling Company, Inc. SBL and SBLG Series Wireless Clocks Table of Contents Table of Contents 2 Important Safety Instructions
More informationSimple and highly effective technology to communicate your brand s distinctive character
. . . Advantages 4 Simple and highly effective technology to communicate your brand s distinctive character COST EFFECTIVE No need to print graphics, you can change your message every day! No media player
More informationMT-RJ SECURE Product Expansion Now 10 Variants of the MT-RJ SECURE Products
MT-RJ Product Expansion Now 0 Variants of the MT-RJ Products In response to several customers, the MT-RJ product line has been expanded with an additional six color/key versions. In addition to the original
More informationSPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment
2004 Specifications CSJ 3256-02-079 & 3256-03-082 SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment 1. Description. Furnish and install Fiber Optic Video Data Transmission Equipment
More information10 PDUs 19 PDUs Zero-U PDUs
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex - France Tel: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 www.legrand.com 10 PDUs Page 1. GENERL CHRCTERISTICS...1 2. EQUIPMENT ND PERFORMNCE...3
More informationInstruction manual. Midi Fiber Dome. Instruction manual
Midi Fiber Dome Instruction manual Product contents: - 1x Midi Fiber Dome - 1x Window Cut port seal - 1x sealing rubber (long) - 4x sealing rubber (short) - 4x stainless steel screw 4 x 25 T20-6x dummies
More informationService Parts Diagrams. For Model: 10/20/09 Service Parts Diagrams for the Rear Projection SMART Board 3000i-DV Interactive Whiteboard 1
Service Parts Diagrams For Model: 000i-DV with the serial NEC MT060 numbers Serial greater numbers than 000 000i-DV-09000 to 0999 0/0/09 Service Parts Diagrams for the Rear Projection SMART Board 000i-DV
More informationHQ Electromagnetic Channel Locks
HQ Electromagnetic Channel Locks Table of Contents Overview... 2 Kit Contents... 2 Tools Required... 5 Installation... 5 Using the HQ Electromagnetic Channel Locks... 10 Troubleshooting... 11 Overview
More informationA6 OPERATING INSTRUCTIONS
Amerec s A6 control for the AX steamer is a touch screen control intended to be mounted on a wall, generally in or near the steam bath. It may be mounted directly on the wall surface or, using an optional
More informationOmni Ultimate Quick Start Guide. 120V AC or 230V AC.
Omni Ultimate Quick Start Guide 120V AC or 230V AC www.omnicharge.co POWER YOUR NEXT ADVENTURE For more information visit our support page at www.omnicharge.co 2 BEFORE USING CALIBRATE THE BATTERY To make
More informationCONNECTING THE FUTURE 19" LINXS LIGHTWAVE INTEGRATED CROSS-CONNECT SYSTEM USER MANUAL
CONNECTING THE FUTURE 19" LINXS LIGHTWVE INTEGRTED CROSS-CONNECT SYSTEM USER MNUL 109003 Issue Rev 2 19" Lightwave Integrated Cross-Connect System (LINXS) User Manual Document Number 109003 Issue Rev 2
More informationHCS - HES Cabling Systems
HCS - HES Cabling Systems Installation Manual for HCS High-Capacity Fiber-Optic Rack-Mount Cabinets Be sure to read and completely understand this procedure before applying product. Be sure to select the
More informationUp to 85% higher Service Life due to efficient sealing method.
Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348
More informationThird Edition. Product instructions (English version) LCD TEST TOOL. Instructions. (All rights reserved, pirates must investigate) 2015/08/
LCD TEST TOOL Instructions (All rights reserved, pirates must investigate) - 1 - Catalogue 一 Appearance Introduction 二 Function Introduction 三 Operating Instructions 四 Precautions for Use 五 After Service
More informationDL-AR2 Technical Specifications Universal HDMI Adapter Ring Rev
DL-AR2 Technical Specifications Universal HDMI Adapter Ring Rev. 130814 The DL-AR2 Digital Adapter Keychain was developed to support the rising proliferation of mobile devices used in presentation systems.
More informationL-series Instructions for 3D configurator.
L-series Instructions for 3D configurator www.hypertronics.com These instructions are intended to guide the customer through the process of creating and generating valid L-series connector assemblies.
More informationSIMET AVIKO D INSTRUCTION MANUAL SORTING Solutions, Ltd.
SIMET AVIKO D INSTRUCTION MANUAL 1870 SORTING Solutions, Ltd. 1. TABLE OF CONTENTS 1. TABLE OF CONTENTS...1 2. INTRODUCTION...2 2.1. Application...2 2.2. Operating Conditions...2 2.3. Electro - Optical
More informationTimer Modules. EL11 24 Hour Module EL17 7 Day Module. Installation & Operating Instructions
Timer Modules EL11 24 Hour Module EL17 7 Day Module Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference and maintenance.
More informationHigh Performance (Gold Plus) Spliceable Tape Feeder Part Number: Part Number: Revision 3 Jun 2008 No.
8mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934707 12mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934807 Revision 3 Jun 2008 No. 0930D-E010 i Table
More information2178 Fiber Optic Splice Case and 2181 Cable Addition Kit
2178 Fiber Optic Splice Case and 2181 Cable Addition Kit Instructions January 1994 Issue 1, 34-7029-6387-6 1 2 Contents: 1.0 General... 4 2.0 Specifications... 4 3.0 Kit Contents... 5 SECTION 1: 2178 Splice
More informationINSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN
INSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN 1.1 TECHNICAL DATA PRODUCT DESCRIPTION Screens made with the following projection fabrics: SOFT WHITE, MATT WHITE SOFT, SOFT WHITE TRANSOUND,
More information12W LED Underground OPTIONS ON REQUEST. 160mm LED UNDERGROUND LIGHT. Item Code: Model No.: RS-UG12W-PM. 110mm 145mm
-High efficiency light source, Cree 1W high power led. -High quality 304SS+ Alumimum lamp fixture, Beautiful appearance and reasonable w aterproof structure. -Tempered glass as cover, heat-resisting and
More informationPROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS
INDUCTIVE TUBULAR SENSOR M30 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More information