AP2-3 AT2-3/AT2V-3V ATE2/ATE2V

Transcription

1 SPARE PARTS LIST ERSATZTEILLISTE LISTE PIÈCES DÉTACHÉES AP2-3 AT2-3/AT2V-3V ATE2/ATE2V bar max BY-PASS 2 bar max SUNTEC INDUSTRIES France 1, rue Lavoisier CS LONGVIC Cedex Tel +33 (0) information@suntec.fr January 2018

2 SPARE PARTS LIST ERSATZTEILLISTE LISTE PIÈCES DÉTACHÉES AP2-3 AT2-3/AT2V-3V ATE2/ATE2V Pos. Description Reference 1 AP2-3/AT2/ATE2 Low Pressure regulator kit (5-25 bars) AT3 Low Pressure regulator kit (8-15 bars) High Pressure regulator kit (5-25 bars) Shaft seal kit (lip seal + protective cone) By-pass plug G 1/ G 1/8 G 1/4 steel plug G 1/8 steel plug (without washer) G 1/4 plastic plug TR G 1/8 plastic plug TR 8 Filter Bulletin n 21 9 Cover Bulletin n 58 Pos. Description Reference 10.1 «Cover s + filter + O-ring» kit ("low" ) «Cover s + filter + O-ring» kit ("high" ) "Cover + + filter" kit Bulletin n Pressure gauge port or vacuum gauge port screw O-ring Coil V, 50/60 Hz Coil V, 50/60 Hz Coil 24V, 50/60 Hz 15 Bypass solenoid tube assy AT2/AT3 Blocking solenoid tube assy 17 ATE2 Blocking solenoid tube assy AP2/AP3 Solenoid kit Bulletin n 20 Pos. Bechreibung Teilnummer 1 AP2-3/AT2/ATE2 Niederdruckregelsatz (5-25 bar) AT3 Niederdruckregelsatz (8-15 bar) Hochdruckregelsatz (5-25 bar) Wellendichtungsatz (Lippendichtung + Schutzkonus) Umleitstopfen G 1/4 Dichtung G 1/8 Dichtung G 1/4 Stahlstopfen G 1/8 Stahlstopfen (ohne Scheibe) G 1/4 Plastikstopfen TR G 1/8 Plastikstopfen TR 8 Sieb Bulletin Nr.21 9 Deckeldichtung Bulletin Nr.58 Pos. Bechreibung Teilnummer 10.1 Deckeldichtungen + Sieb + O-Ring Satz ("Niedriger" Deckel) Deckeldichtungen + Sieb + O-Ring Satz ("Hoher" Deckel) "Deckel + Deckeldichtung + Sieb" Satz Bulletin Nr Druck- oder Vakuummeteranschlußschraube O-Ring Spule V, 50/60 Hz Spule V, 50/60 Hz Spule 24V, 50/60 Hz 15 Bypass-Magnetventilkernsatz AT2/AT3 Sicherungsmagnetventilkernsatz 17 ATE2 Sicherungsmagnetventilkernsatz AP2/AP3 Magnetventilsatz Bulletin Nr.20 Pos. Désignation Référence 1 Ens. régul. basse pression AP2-3/AT2/ATE2 (5-25 bars) Ens. régul. basse pression AT3 (8-15 bars) Ens. régulateur haute pression (5-25 bars) Ensemble «joint à lèvre» (joint + cône de montage) Bouchon by-pass Rondelle G 1/ Rondelle G 1/8 Bouchon acier G 1/ Bouchon acier G 1/8, sans rondelle Bouchon plastique G 1/ TR Bouchon plastique G 1/ TR 8 Filtre Bulletin n 21 9 Joint de couvercle Bulletin n 58 Pos. Désignation Référence 10.1 Ens. «joints de couvercle + filtre + joint torique» (couvercle "bas") 10.2 Ens. «joints de couvercle + filtre + joint torique» (couvercle "haut") 11 Ens. "couv. + joint de couv. + filtre" Bulletin n Vis de prise de pression ou de vide Joint torique Bobine V, 50/60 Hz Bobine V, 50/60 Hz Bobine 24V, 50/60 Hz 15 Ens. tube électrovanne de dérivation Ens. tube électrovanne de coupure AT2/AT3 17 Ens. tube électrovanne de coupure ATE2 Électrovanne complète AP2/AP Bulletin n 20 SUNTEC INDUSTRIES France 1, rue Lavoisier CS LONGVIC Cedex Tel +33 (0) information@suntec.fr January 2018

3 BULLETIN N 20 Solenoid kits for SUNTEC pumps These references are also valid for "V" models. Pump type Voltage Coil Tube assy (tube + screws + nut + washer + O-rings Solenoid kit (coil + tube assy) AS V ; 50/60 Hz V ; 50/60 Hz 24 V ; 50/60 Hz (1) (1) (1) AL* rev. 2, 4, 5, V ; 50/60 Hz V ; 50/60 Hz 24 V ; 50/60 Hz ALE V ; 50/60 Hz AU AR/A2L V ; 50/60 Hz + AP V ; 50/60 Hz (1) AP 2/ V ; 50/60 Hz (2) AT 2/3* rev. 2, 4, V ; 50/60 Hz (2)(3) (2)(3) * : tube assy for AL rev.1 and AT 2/3 rev.1 is no more available. (1): this kit includes the plate. (2): this kit contains 2 plates (only one plate must be fi tted according to the pump confi guration). (3): this kit contains 2 tube assemblies. SB20-GB / Ed.13-08/01/2018 Tel.: +33 (0) Fax: +33 (0) information@suntec.fr -

4 BULLETIN N 21 Strainer for Suntec pumps These references are also valid for "V" models. Pump type Strainer reference AN / AE / AS / AP 47 / 57 / 67 Series rev. 3, 4, 5, 6 Series rev. 1, 4, 5, (height 20 mm) Series rev (height 28 mm) (only for pumps manufactured after 1988) AN / AE 77 / 97 Series rev. 3, 4 / Series rev. 1, (height 23 mm) Series rev (height 28 mm) (only for pumps manufactured after 1988) AL / ALE / A2L / AR 35 / 55 / (height 20 mm) AL / ALE / A2L / AR 75 / (height 23 mm) AU (height 20 mm) AP2 / AT2 / AP3 / AT3 45 / 55 / (height 20 mm) AP2 / AT2 75 / (height 23 mm) D rev (height 28 mm) AJ J E (type "C") or (type "N") E SB21-GB / Ed.16-08/01/2018 Tel.: +33 (0) Fax: +33 (0) information@suntec.fr -

5 BULLETIN N 34 Cover kits for Suntec pumps These references are also valid for "V" models. Pump type Kit reference Contents AN / AE / AS / AP 47 / 57 / 67 revision1, 3, 4, 5, 6 (low ) rot.: A/D fi lter + + fi lter + AN / AE 77 / 97 revision 3, 4, 5, 6 (high ) fi lter + AP2 / AP3 / AT2 / AT3 45 / 55 / 65 revision 1, 2, 4 (low ) rot.: A/D fi lter + + fi lter + AP2 75 / 95 revision 1, 4 AT2 75 / 95 revision 2, 4 (high ) fi lter + 1/2 SB34 - GB / Ed.15-08/01/ information@suntec.fr -

6 Pump type Kit reference Contents AU 47 AL / ALE / A2L / AR 35 / 55 / 65 revision 1, 2, 4, 5, 6 (low ) except A2L 35D fi lter + AL / ALE / A2L / AR 75 / 95 revision 2, 4, 5, 6 (high ) fi lter + A2L 35D fi lter + AJ fi lter + J fi lter + E 1001 / E1069 NA, NB, NC, ND fi lter type "N"+ 2/2 SB34 - GB / Ed.15-08/01/ information@suntec.fr -

7 BULLETIN N 58 Cover and for "A" pumps These references are also valid for "V" models. Pumps with "square" Pumps with low : AN/AE/AS/AP 47/57/ revision 4/6, revision 4/6. AL/ALE/AT2 35/45/55/ revision 4 and 6. A2L/AP2/AP3/AT3/AR 35/45/55/ revision 4. AU revision 6. AN 47C 13XX 4 xxx "1000" "4" Pumps with high : AN/AE 77/ revision 4, revision 6. AL/AT2 75/ revision 4 and 6. A2L/AP2/AR 75/ revision 4 AE 77C 73XX4x AE 77C 73XX 4xxx "7000" "4" WARNING : Cover ref is specifi c to pumps with square (without pressure port 0-ring) and is not interchangeable with ref ( for pumps with round aluminium ). 1/3 SB58 - GB / Ed.11-05/01/ information@suntec.fr -

8 Pumps with "round" Pumps with low : AN/AE/AS/AP 47/57/ revision 3/5, revision 1/5. AL/ALE/A2L/AR 35/45/55/ revision 1, 2 and 5. AP2/AT2/AP3/AT3 35/45/55/ revision 1, 2 and 5. AU revision 2. AN 47C 13XX 1 xxx AN47C 13xx1xxx O-ring "1000" "1" Pumps with high : AN/AE 77/ revision 3 and 5. AL/A2L/AR/AT2 75/ revision 2 and 6. AP2 75/ revision 1 AE 77C 73XX 3xxx AE 77C 73XX3x O-ring "7000" "3" SB58 - GB / Ed.11-05/01/2018 2/3 information@suntec.fr -

9 After sales kits These kits could be used either for "square" or "round". kit Low kit High Kit consists of : - one ref , - two s ref and , - one O-ring for pressure port ref Kit consists of : - one ref , - two s ref and , - one O-ring for pressure port ref Pumps with cast iron or aluminium Pumps concerned are as follows : AN/AE/AS/AP 47/57/ revision 2. AN/AE 77/ revision 2. AN 77C 73XX 2 xxx "7000" "2" AN77C 73XX2x mm* * this can only be used for pumps manufactured after /3 SB58 - GB / Ed.11-05/01/ information@suntec.fr -