B01-B02 INTERRUTTORI DI PROSSIMITA INDUTTIVI CENELEC STANDARD E SERIE CORTA SERIE SERIES
|
|
|
- Geoffrey Dawson
- 5 years ago
- Views:
Transcription
1 INTERRUTTORI DI PROSSIMITA INDUTTIVI CENELEC STANDARD E SERIE CORTA SERIE SERIES B01- INDUCTIVE PROXIMITY SWITCHES STANDARD CENELEC AND SHORTY SERIES Rev: 0.
2 INTERRUTTORI DI PROSSIMITA INDUTTIVI CENELEC STANDARD E SERIE CORTA INDUCTIVE PROXIMITY SWITCHES STANDARD CENELEC AND SHORTY SERIES B01 INTERRUTTORI DI PROSSIMITA CILINDRICI INDUTTIVI DIAM. 6, mm. SERIE STANDARD CENELEC e SERIE CORTA USCITA CAVO O CONNETTORE M8 - M12 - C3 ALIMENTAZIONE IN C.C. 10 Vcc INDUCTIVE CYLINDRICAL PROXIMITY SWITCHES 6, mmDIAMETER. STANDARD CENELEC and SHORTY SERIES CABLE OUTPUT OR M8 - M12 - C3 CONNECTOR OUTPUT C.C. 10 Vdc SUPPLY VERSION COME ORDINARE SERIE SERIES B01 = Serie Cenelec Cenelec series = Serie corta Shorty series MONTAGGIO MOUNTING [-]=Schermato / Shielded E = Non schermato / Unshielded CONNESSIONE LINK [-]=connettore connector G = uscita cavo cable output N = uscita cavo con codolino shank - type cable output B01 E - 1 P O C HOW TO ORDER CONNESSIONE LINK [-]=uscita cavo (2 m) cable output (2 m) C3 = Connettore C3 C3 connector C4 = Connettore C4 C4 connector C = Connettore M12 M12 connector V6 = Connettore M8 M8 connector USCITA OUTPUT O = normalmente aperto normally open C = normalmente chiuso normally closed SC = 2 uscite NA+NC (4 fili) 2 outputs NO+NC (4 wires) ELETTRONICA ELECTRONICS DIAMETRO SENSORE SENSOR DIAMETER 6, = Ø6, mm liscio/smooth 8 = M8 mm filettato/threaded 12 = M12 mm filettato/threaded 18 = M18 mm filettato/threaded = M mm filettato/threaded PLEASE NOTE: this matrix is intended only to aid you in identifying sensor catalog listing. It is not all-inclusive and must not be used to form new listings NOTA BENE: questo schema è fornito solo per aiutare a identificare le caratteristiche dei prodotti a catalogo. Non è onnicomprensivo e pertanto non deve essere usato per creare nuovi riferimenti di prodotti. Rev: 0. P = PNP N = NPN DISTANZA DI RILEVAMENTO SENSING DISTANCE Ø6, = *1/1, mm - **2 mm M8 = *1/1, mm - **2 mm M12 = * 2 mm - ** 4 mm M18 = * mm - ** 8 mm M = * 10 mm - ** 1 mm * totalmente schermato / shielded ** parzialmente schermato / unshielded
3 CARATTERISTICHE ELETTRICHE ELECTRICAL FEATURES ALIMENTAZIONE 10 Vcc/Vdc SUPPLY VOLTAGE ONDULAZIONE RESIDUA < 10% RIPPLE ASSORBIMENTO < 10 ma POWER CONSUMPTION CARICO MASSIMO 0 ma MAXIMUM LOAD CADUTA DI TENSIONE <3V@0mA VOLTAGE DROP PROTEZIONE C.C. SI / YES SHORT CIRCUIT PROTECTION PROTEZIONE INVERS. POLARITA SI / YES REVERSAL POLARITY PROTECTION DI SEGNALAZIONE SI / YES OUTPUT STATUS COMPATIBILITA ELETTROMAGNETICA CE EN CE COMPLIANCE CERTIFICAZIONE CE CERTIFICATION CARATTERISTICHE TECNICHE TECHNICAL FEATURES SENSORI DIAMETRO 6, mm 6, mm DIAMETER SENSORS Ø6,mm (FLUSH) (NO FLUSH) DISTANZA D INTERVENTO - Sn 1 1, 2 Sn - SENSING DISTANCE DISTANZA REALE +/- 10% Sn REAL DISTANCE ISTERESI < 10% Sn HYSTERESIS RIPETIBILITÁ < 2%Sn REPEATABILITY FREQUENZA MASSIMA 10 Hz 10 Hz 1000 Hz MAX. SWITCHING FREQUENCY TEMPERATURA DI LAVORO -2 C + C WORKING TEMPERATURE MATERIALE CORPO OTTONE NICHELATO NICKEL PLATED BRASS BODY MATERIAL PROTEZIONE IP67 (con connettore montato/with connector mounted) PROTECTION RATING CAVO 3x0,14 mm 2 CABLE CONNETTORE M8 (V6) V6-V7 (V6) M8 CONNECTOR CONNETTORE M12 (C) C-C6-C7-L7 (C) M12 CONNECTOR SENSORI DIAMETRO 8-12 mm 8-12 mm DIAMETER SENSORS M8 M12 (FLUSH) (NO FLUSH) DISTANZA D INTERVENTO - Sn 1 1, Sn - SENSING DISTANCE DISTANZA REALE +/- 10% Sn REAL DISTANCE ISTERESI <10 % Sn HYSTERESIS REPETIBILITÁ < 2% Sn REPEATABILITY FREQUENZA MASSIMA 10 Hz 1000 Hz 10 Hz 1000 Hz MAX. SWITCHING FREQUENCY TEMPERATURA DI LAVORO -2 C + C WORKING TEMPERATURE MATERIALE CORPO OTTONE NICHELATO NICKEL PLATED BRASS BODY MATERIAL PROTEZIONE IP67 (con connettore montato/with connector mounted) PROTECTION RATING CAVO 3x0,14 mm 2 3x0,14 mm 2 4x0,14 mm 2 CABLE CONNETTORE M8 (V6) V6-V7 / (V6) M8 CONNECTOR CONNETTORE M12 (C) C-C6-C7-L7 C-C6-C7-L7-C9-L9 (C) M12 CONNECTOR CONNETTORE ALTRO TIPO C3 OTHER CONNECTOR Rev: 0.
4 SENSORI DIAMETRO 18 - mm 18 - mm DIAMETER SENSORS M18 M (FLUSH) (NO FLUSH) DISTANZA D INTERVENTO - Sn Sn - SENSING DISTANCE DISTANZA REALE +/- 10% Sn REAL DISTANCE ISTERESI < 10% Sn HYSTERESIS RIPETIBILITÁ < 2% Sn REPEATABILITY FREQUENZA MASSIMA 0 Hz 0 Hz 0 Hz 0 Hz MAX. SWITCHING FREQUENCY TEMPERATURA DI LAVORO -2 C + C WORKING TEMPERATURE MATERIALE CORPO OTTONE NICHELATO NICKEL PLATED BRASS BODY MATERIAL PROTEZIONE IP67(con connettore montato/with connector mounted) PROTECTION RATING CAVO 3x0,3 mm 2 4x0,3 mm 2 CABLE CONNETTORE M12 (C) C-C6-C7-L7-C9-L9 (C) M12 CONNECTOR CONNETTORE ALTRO TIPO C3 C4 OTHER CONNECTOR COLLEGAMENTI CONNECTIONS PNP - NO PNP - NC + (1) (1) MARRONE / BROWN MARRONE / BROWN NPN-NO NPN-NC (4) NERO / BLACK OUT (4) NERO / BLACK CARICO/ LOAD (3) BLU / BLUE 0V (3) BLU / BLUE - + CARICO / LOAD OUT - 0V PNP - SC NO NC (1) MARRONE / BROWN (4)NERO / BLACK (2)BIANCO / WHITE (3) BLU / BLUE + CARICO / LOAD - NPN-SC NO NC (1) MARRONE / BROWN (4) NERO / BLACK (2) BIANCO / WHITE + (3) BLU / BLUE - CARICO / LOAD DIMENSIONI MECCANICHE DIAMETRO 6, mm MECHANICAL SIZE 6, mm DIAMETER SERIE CENELEC B01 CENELEC SERIES B01G6,1_ B01G6,1,_ B01EG6,2_ B016,1_V6 B016,1,_V6 B01E6,2_V6 B016,1_C B016,1,_C B01E6,2_C Ø 6, Ø 6, Ø 6, Ø 6, Ø 6, Ø 6, M8X1 M8X Rev: 0.
5 B01 SERIE CORTA SHORTY SERIES G6,1_ G6,1,_ EG6,2_ 6,1_V6 6,1,_V6 E6,2_V6 6,1_C 6,1,_C E6,2_C Ø 6, Ø 6, Ø 6, Ø 6, Ø 6, Ø 6, DIAMETRO 8 mm 8 mm DIAMETER SERIE CENELEC B01 CENELEC SERIES B01G81_ B01G81,_ B01EG82_ B0181_V6 B0181,_V6 B01E82_V6 B0181_C B0181,_C B01E82_C B0181_C3 B0181,_C3 B01E82_C SERIE CORTA SHORTY SERIES G81_ G81,_ EG82_ 81_V6 81,_V6 E82_V6 81_C 81,_C E82_C Rev: 0.
6 B01 DIAMETRO 12 mm 12 mm DIAMETER SERIE CENELEC B01 CENELEC SERIES B01G122_ B01EG124_ B01N122_ B01EN124_ B01122_C B01E124_C B01122_C3 B01E124_C , 2, SERIE CORTA SHORTY SERIES G122_ EG124_ 122_C E124_C DIAMETRO 18 mm 18 mm DIAMETER SERIE CENELEC B01 CENELEC SERIES B01G18_ B01EG188_ B01N18_ B01EN188_ B0118_C B01E188_C B0118_C3 B01E188_C Rev: 0.
7 B01 SERIE CORTA SHORTY SERIES G18_ EG188_ 18_C E188_C DIAMETRO mm mm DIAMETER SERIE CENELEC B01 CENELEC SERIES B01G10_ B01EG1_ B01N10_ B01EN1_ B0110_C B01E1_C B0110_C4 B01E1_C4 Mx1, 1 Mx1, 90 Mx1, 1 90 Mx1, 80 Mx1, 1 80 Mx1, Mx1, Mx1, SERIE CORTA SHORTY SERIES G10_ EG1_ 10_C E1_C Mx1, Mx1, Mx1, Mx1, Rev: 0.
8 ELENCO PRODOTTI PRODUCTS LIST SERIE B01 STANDARD CENELEC / B01 STANDARD CENELEC SERIES DIAMETRO 6, - 6, mm DIAMETER - SENSING DISTANCE 1mm PORTATA 1,mm SENSING DISTANCE 1.mm USCITA CONNETTORE M8 CONNECTOR OUTPUT PORTATA 1,mm SENSING DISTANCE 1mm SENSING DISTANCE 1.mm PNP-NO B01G6,1PO B01G6,1,PO B016,1POV6 B016,1,POV6 PNP-NC B01G6,1PC B01G6,1,PC B016,1PCV6 B016,1,PCV6 NPN-NO B01G6,1NO B01G6,1,NO B016,1NOV6 B016,1,NOV6 NPN-NC B01G6,1NC B01G6,1,NC B016,1NCV6 B016,1,NCV6 SENSING DISTANCE 1mm PORTATA 1,mm SENSING DISTANCE 1.mm PNP-NO B016,1POC B016,1,POC PNP-NC B016,1PCC B016,1,PCC NPN-NO B016,1NOC B016,1,NOC NPN-NC B016,1NCC B016,1,NCC DIAMETRO 6, - 6, mm DIAMETER - USCITA CONNETTORE M8 CONNECTOR OUTPUT PNP-NO - B01EG6,2PO - B01E6,2POV6 PNP-NC - B01EG6,2PC - B01E6,2PCV6 NPN-NO - B01EG6,2NO - B01E6,2NOV6 NPN-NC - B01EG6,2NC - B01E6,2NCV6 PNP-NO - B01E6,2POC PNP-NC - B01E6,2PCC NPN-NO - B01E6,2NOC NPN-NC - B01E6,2NCC Rev: 0.
9 DIAMETRO 8-8 mm DIAMETER - SENSING DISTANCE 1mm PORTATA 1,mm SENSING DISTANCE 1.mm PORTATA 1,mm SENSING DISTANCE 1mm SENSING DISTANCE 1.mm USCITA CONNETTORE M8 CONNECTOR OUTPUT PORTATA 1,mm SENSING DISTANCE 1mm SENSING DISTANCE 1.mm PNP-NO B01G81PO B01G81,PO B0181POV6 B0181,POV6 PNP-NC B01G81PC B01G81,PC B0181PCV6 B0181,PCV6 NPN-NO B01G81NO B01G81,NO B0181NOV6 B0181,NOV6 NPN-NC B01G81NC B01G81,NC B0181NCV6 B0181,NCV6 USCITA CONNETTORE C3 CONNECTOR OUTPUT PORTATA 1,mm SENSING DISTANCE 1mm SENSING DISTANCE 1.mm PNP-NO B0181POC B0181,POC B0181POC3 B0181,POC3 PNP-NC B0181PCC B0181,PCC B0181PCC3 B0181,PCC3 NPN-NO B0181NOC B0181,NOC B0181NOC3 B0181,NOC3 NPN-NC B0181NCC B0181,NCC B0181NCC3 B0181,NCC3 DIAMETRO 8-8 mm DIAMETER - USCITA CONNETTORE M8 CONNECTOR OUTPUT PNP-NO - B01EG82PO - B01E82POV6 PNP-NC - B01EG82PC - B01E82PCV6 NPN-NO - B01EG82NO - B01E82NOV6 NPN-NC - B01EG82NC - B01E82NCV6 USCITA CONNETTORE C3 CONNECTOR OUTPUT PNP-NO - B01E82POC - B01E82POC3 PNP-NC - B01E82PCC - B01E82PCC3 NPN-NO - B01E82NOC - B01E82NOC3 NPN-NC - B01E82NCC - B01E82NCC3 Rev: 0.
10 DIAMETRO mm DIAMETER USCITA CAVO CON CODOLINO / SHANK TYPE CABLE OUTPUT PNP-NO B01G122PO B01EG124PO B01N122PO B01EN124PO PNP-NC B01G122PC B01EG124PC B01N122PC B01EN124PC PNP-SC B01G122PSC B01EG124PSC B01N122PSC B01EN124PSC NPN-NO B01G122NO B01EG124NO B01N122NO B01EN124NO NPN-NC B01G122NC B01EG124NC B01N122NC B01EN124NC NPN-SC B01G122NSC B01EG124NSC B01N122NSC B01EN124NSC USCITA CONNETTORE C3 CONNECTOR OUTPUT PNP-NO B01122POC B01E124POC B01122POC3 B01E124POC3 PNP-NC B01122PCC B01E124PCC B01122PCC3 B01E124PCC3 PNP-SC B01122PSCC B01E124PSCC B01122PSCC3 B01E124PSCC3 NPN-NO B01122NOC B01E124NOC B01122NOC3 B01E124NOC3 NPN-NC B01122NCC B01E124NCC B01122NCC3 B01E124NCC3 PNP-SC B01122NSCC B01E124NSCC B01122NSCC3 B01E124NSCC3 DIAMETRO mm DIAMETER USCITA CAVO CON CODOLINO / SHANK TYPE CABLE OUTPUT PNP-NO B01G18PO B01EG188PO B01N18PO B01EN188PO PNP-NC B01G18PC B01EG188PC B01N18PC B01EN188PC PNP-SC B01G18PSC B01EG188PSC B01N18PSC B01EN188PSC NPN-NO B01G18NO B01EG188NO B01N18NO B01EN188NO NPN-NC B01G18NC B01EG188NC B01N18NC B01EN188NC NPN-SC B01G18NSC B01EG188NSC B01N18NSC B01EN188NSC USCITA CONNETTORE C3 CONNECTOR OUTPUT PNP-NO B0118POC B01E188POC B0118POC3 B01E188POC3 PNP-NC B0118PCC B01E188PCC B0118PCC3 B01E188PCC3 PNP-SC B0118PSCC B01E188PSCC B0118PSCC3 B01E188PSCC3 NPN-NO B0118NOC B01E188NOC B0118NOC3 B01E188NOC3 NPN-NC B0118NCC B01E188NCC B0118NCC3 B01E188NCC3 PNP-SC B0118NSCC B01E188NSCC B0118NSCC3 B01E188NSCC3 Rev: 0.
11 DIAMETRO mm DIAMETER USCITA CAVO CON CODOLINO / SHANK TYPE CABLE OUTPUT PNP-NO B01G10PO B01EG1PO B01N10PO B01EN1PO PNP-NC B01G10PC B01EG1PC B01N10PC B01EN1PC PNP-SC B01G10PSC B01EG1PSC B01N10PSC B01EN1PSC NPN-NO B01G10NO B01EG1NO B01N10NO B01EN1NO NPN-NC B01G10NC B01EG1NC B01N10NC B01EN1NC PNP-SC B01G10NSC B01EG1NSC B01N10NSC B01EN1NSC USCITA CONNETTORE C4 CONNECTOR OUTPUT PNP-NO B0110POC B01E1POC B0110POC4 B01E1POC4 PNP-NC B0110PCC B01E1PCC B0110PCC4 B01E1PCC4 PNP-SC B0110PSCC B01E1PSCC B0110PSCC4 B01E1PSCC4 NPN-NO B0110NOC B01E1NOC B0110NOC4 B01E1NOC4 NPN-NC B0110NCC B01E1NCC B0110NCC4 B01E1NCC4 NPN-SC B0110NSCC B01E1NSCC B0110NSCC4 B01E1NSCC4 Rev: 0.
12 SERIE CORTA / SHORTLY SERIES DIAMETRO 6, - 6, mm DIAMETER - SENSING DISTANCE 1mm PORTATA 1,mm SENSING DISTANCE 1.mm USCITA CONNETTORE M8 CONNECTOR OUTPUT PORTATA 1,mm SENSING DISTANCE 1mm SENSING DISTANCE 1.mm PNP-NO G6,1PO G6,1,PO 6,1POV6 6,1,POV6 PNP-NC G6,1PC G6,1,PC 6,1PCV6 6,1,PCV6 NPN-NO G6,1NO G6,1,NO 6,1NOV6 6,1,NOV6 NPN-NC G6,1NC G6,1,NC 6,1NCV6 6,1,NCV6 SENSING DISTANCE 1mm PORTATA 1,mm SENSING DISTANCE 1.mm PNP-NO 6,1POC 6,1,POC PNP-NC 6,1PCC 6,1,PCC NPN-NO 6,1NOC 6,1,NOC NPN-NC 6,1NCC 6,1,NCC DIAMETRO 6, - 6, mm DIAMETER - USCITA CONNETTORE M8 CONNECTOR OUTPUT PNP-NO - EG6,2PO - E6,2POV6 PNP-NC - EG6,2PC - E6,2PCV6 NPN-NO - EG6,2NO - E6,2NOV6 NPN-NC - EG6,2NC - E6,2NCV6 PNP-NO - E6,2POC PNP-NC - E6,2PCC NPN-NO - E6,2NOC NPN-NC - E6,2NCC Rev: 0.
13 DIAMETRO 8-8 mm DIAMETER - SENSING DISTANCE 1mm PORTATA 1,mm SENSING DISTANCE 1.mm USCITA CONNETTORE M8 CONNECTOR OUTPUT PORTATA 1,mm SENSING DISTANCE 1mm SENSING DISTANCE 1,mm PNP-NO G81PO G81,PO 81POV6 81,POV6 PNP-NC G81PC G81,PC 81PCV6 81,PCV6 NPN-NO G81NO G81,NO 81NOV6 81,NOV6 NPN-NC G81NC G81,NC 81NCV6 81,NCV6 SENSING DISTANCE 1mm PORTATA 1,mm SENSING DISTANCE 1.mm PNP-NO 81POC 81,POC PNP-NC 81PCC 81,PCC NPN-NO 81NOC 81,NOC NPN-NC 81NCC 81,NCC DIAMETRO 8-8 mm DIAMETER - USCITA CONNETTORE M8 CONNECTOR OUTPUT PNP-NO - EG82PO - E82POV6 PNP-NC - EG82PC - E82PCV6 NPN-NO - EG82NO - E82NOV6 NPN-NC - EG82NC - E82NCV6 PNP-NO - E82POC PNP-NC - E82PCC NPN-NO - E82NOC NPN-NC - E82NCC Rev: 0.
14 DIAMETRO mm DIAMETER PNP-NO G122PO EG124PO 122POC E124POC PNP-NC G122PC EG124PC 122PCC E124PCC PNP-SC G122PSC EG124PSC 122PSCC E124PSCC NPN-NO G122NO EG124NO 122NOC E124NOC NPN-NC G122NC EG124NC 122NCC E124NCC NPN-SC G122NSC EG124NSC 122NSCC E124NSCC DIAMETRO mm DIAMETER PNP-NO G18PO EG188PO 18POC E188POC PNP-NC G18PC EG188PC 18PCC E188PCC PNP-SC G18PSC EG188PSC 18PSCC E188PSCC NPN-NO G18NO EG188NO 18NOC E188NOC NPN-NC G18NC EG188NC 18NCC E188NCC NPN-SC G18NSC EG188NSC 18NSCC E188NSCC DIAMETRO mm DIAMETER PNP-NO G10PO EG1PO 10POC E1POC PNP-NC G10PC EG1PC 10PCC E1PCC PNP-SC G10PSC EG1PSC 10PSCC E1PSCC NPN-NO G10NO EG1NO 10NOC E1NOC NPN-NC G10NC EG1NC 10NCC E1NCC NPN-SC G10NSC EG1NSC 10NSCC E1NSCC Rev: 0.
15 Altri prodotti - interruttori di prossimità induttivi; - interruttori di prossimità capacitivi; - interruttori di prossimità magnetici; - interruttori di prossimità fotoelettrici; - connettori e cassette di connessione per sensori; - encoder incrementali ed assoluti; - alimentatori / interfacce per sensori; - alimentatori da rete e da secondario per uso generico; - voltmetri, amperometri, contagiri, visualizzatori a pannello; - contaimpulsi mono e bidirezionali, contaproduzione, contagiri; - termometri e termoregolatori - schede logiche programmabili per uso OEM; - pulsanteria e finecorsa meccanici; Other products: - inductive proximity switches; - capacitive proximity switches; - magnetic proximity switches; - photo-electric sensors & proximity switches; - connectors & connection boxes for sensor; - incremental & absolute encoders; - supply units / interfaces for sensors; - power supply units for general purpose; - voltmeters, ammeters, revolution counters, panel displays; - counters mono & bi-directional, timers, revolution counters; - thermometers & temperature controllers; - OEM programmable logic cards; - push-button & mechanical limit switches; Rev: 0.
INTERRUTTORI DI PROSSIMITA INDUTTIVI CON ELEVATA PROTEZIONE SERIE STANDARD E SERIE CORTA CON CERTIFICAZIONE culus B62-B63
INTERRUTTORI DI PROSSIMITA INDUTTIVI CON ELEVATA PROTEZIONE SERIE STANDARD E SERIE CORTA CON CERTIFICAZIONE culus SERIE SERIES B62- INDUCTIVE PROXIMITY SWITCHES WITH HIGH PROTECTION STANDARD & SHORTLY
INTERRUTTORI DI PROSSIMITA INDUTTIVI CON CUSTODIA IN PLASTICA INDUCTIVE PROXIMITY SWITCHES WITH PLASTIC HOUSING
INTERRUTTORI DI PROSSIMITA INDUTTIVI CON CUSTODIA IN PLASTICA SERIE SERIES B14 INDUCTIVE PROXIMITY SWITCHES WITH PLASTIC HOUSING INTERRUTTORI DI PROSSIMITA INDUTTIVI CON CUSTODIA IN PLASTICA INDUCTIVE
INTERRUTTORI DI PROSSIMITÀ INDUTTIVI AMPLIFICATI A DUE FILI IN CORRENTE ALTERNATA / CONTINUA A PORTATA MAGGIORATA
INTERRUTTORI DI PROSSIMITÀ INDUTTIVI AMPLIFICATI A DUE FILI IN CORRENTE ALTERNATA / CONTINUA A PORTATA MAGGIORATA SERIE SERIES INDUCTIVE PROXIMITY SWITCHES AMPLIFIED TWO WIRES AC / DC LONG RANGE INTERRUTTORI
K01 INTERRUTTORE DI PROSSIMITA CAPACITIVO FILETTATO IN C.C. E C.A. SERIE SERIES CAPACITIVE PROXIMITY SWITCHES THREADED, D.C. AND A.C.
INTERRUTTORE DI PROSSIMITA CAPACITIVO FILETTATO IN C.C. E C.A. SERIE SERIES K01 CAPACITIVE PROXIMITY SWITCHES THREADED, D.C. AND A.C. TYPE INTERRUTTORI DI PROSSIMITA CAPACITIVI CAPACITIVO FILETTATO IN
OCV80/D SERIES FOTOCELLULE CILINDRICHE M12 M12 PHOTOELECTRIC CYLINDRICAL SENSORS TASTEGGIO DIRETTO / DIFFUSE TYPE SERIE BEAM TYPE BARRIERA /
FOTOCELLULE CILINDRICHE M12 TASTEGGIO DIRETTO / DIFFUSE TYPE SERIE OCV80/D SERIES BARRIERA / BEAM TYPE SERIE SERIES M12 PHOTOELECTRIC CYLINDRICAL SENSORS FOTOCELLULE CILINDRICHE M12 - TASTEGGIO DIRETTO
OCV88/D SERIES FOTOCELLULE CILINDRICHE M18 TASTEGGIO DIRETTO MULTIFUNZIONE SERIE PHOTOELECTRIC CYLINDRICAL MULTIFUNCTION SENSORS DIFFUSE TYPE OCV88/D
FOTOCELLULE CILINDRICHE M18 TASTEGGIO DIRETTO MULTIFUNZIONE SERIE OCV88/D SERIES PHOTOELECTRIC CYLINDRICAL MULTIFUNCTION SENSORS DIFFUSE TYPE Turin / Torino Piemont Italy Email: info@selet.it FOTOCELLULE
OCV81/C SERIES FOTOCELLULE CILINDRICHE M18 RIFLESSIONE CON CATARIFRANGENTE SERIE PHOTOELECTRIC CYLINDRICAL SENSORS REFLEX TYPE OCV81/C
FOTOCELLULE CILINDRICHE M18 RIFLESSIONE CON CATARIFRANGENTE SERIE OCV81/C SERIES PHOTOELECTRIC CYLINDRICAL SENSORS REFLEX TYPE Turin / Torino Piemont Italy Email: info@selet.it FOTOCELLULE CILINDRICHE
Diametro 30 mm liscio Diametro 30 mm filettato - serie non amplificati NAMUR - serie amplificati C.C. - serie amplificati C.A.
Interruttori di prossimità capacitivi CILINDRICI Diametro 30 mm liscio Diametro 30 mm filettato serie non amplificati serie amplificati C.C. serie amplificati C.A. TIPI TYPES C.C. Amplificati D.C. Amplified
APPLICATIONS. Automatic warehouse. Trasportation lines
INDUCTIVE TUBULAR SENSOR M8 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
PROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS
INDUCTIVE TUBULAR SENSOR M30 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
APPLICATIONS. Automatic warehouse. Trasportation lines
INDUCTIVE TUBULAR SENSOR M12 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
technical data (according to IEC ) Degree of protection IP 67 Max. ripple content 15 % U B / 20 % U B (amplifier) No-load supply current
Inductive Sensors: high-temperature ü For ambient temperatures of up to +230 C ü With integrated electronics, up to +180 C ü With external electronics, up to +230 C ü Excellent long-term reliability (according
SERIES 400 SERIES 620
x 0. 0... PUR cable type,000 Hz SERIES 00 SERIES 0 0,000 Hz Table Diagram ---.... 9 VDC /. ma** PUR cable type / Connector S,000 Hz 0,000 Hz Table Diagram ---.... 9 VDC /. ma** PUR cable type,000 Hz x
SERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency
1 Size SERIES 400 x SERIES x Operating distance mm 0.8 0.8 1. Housing material Connection 1) PUR cable type 1 PUR cable type 1 / Connector S8 PUR cable type 1 Degree of protection Mounting Max. switching
Modelli Types. 3 Modelli disponibili: 3 Types available:
Modelli Types 3 Modelli disponibili: 3 Types available: - Cablato / Cable version. - Bluetooth con batteria ricaricabile / Bluetooth version with internal rechargeable battery. - Bluetooth con alimentazione
ENC-CK58SN-L R-L1
CK58/ CK59/ CK60 Blind Hollow Shaft Encoder Series FETURES Standard Encoder for Heavy Industrial pplications Blind Hollow Shaft up to ø15mm 2 to 10,000 Cycles Per Revolution 8 to 40,000 Pulses Per Revolution
Photoelectrics Through-beam Type PA18C.T..., DC
Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:
ultrasonic sensors analogue output 0-10V, 4-20mA 2 programmable switching outputs
18, 30 1 design M18x1 M30x1.5 dif. reflection sensor sensing range (teachable) 30... 400mm 60... 500mm 100... 800mm 80... 1500mm 200... 2000mm 300... 3500mm PBT plastic sleeve devices with thread to EURONORM
Inductive sensor. 2-wire, analog output BI8-M18-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M18 x 1 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring diagram Type code Ident no.
Capacitive sensor BCT5-S18-UP6X2T-H1151
M18 1 threaded barrel Plastic, PA12-GF30 Teach-in and configuration via buttons on the device, pin 5 and IO-Link Wiring Diagram Functional principle Type designation Ident no. 2101100 Remark to product
Inductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
M A T R I X - S t e p
M A T R I X - S t e p Sistema professionale di segnalazione luminosa per gradini realizzato in alluminio completo di gomma antiscivolo e schermo di protezione in policarbonato trasparente o opalino e testate
>Inductive and CATALOG. Capacitive Sensors
>Inductive and CATALOG Capacitive Sensors DATALOGIC: SOLUTIONS FOR INDUSTRIAL AUTOMATION Datalogic Industrial Automation is an industry-leader in products and solutions for material handling, traceability,
>Inductive and. REFERENCE guide. Capacitive Sensors
>Inductive and REFEREE guide Capacitive Sensors DATALOGIC: SOLUTIONS FOR INDUSTRIAL AUTOMATION Datalogic Industrial Automation is an industry-leader in products and solutions for material handling, traceability,
>Inductive. REFERENCE guide. Proximity
>Inductive REFEREE guide Proximity DATALOGIC: SOLUTIONS FOR INDUSTRIAL AUTOMATION Datalogic Industrial Automation is an industry-leader in products and solutions for material handling, traceability, inspection
ADVANCED ultrasonic sensors with analog output. Dimensioned drawing
ADVANCED ultrasonic sensors with analog output Dimensioned drawing en 07-2017/02 50124880 4...20 ma 0...10 V 25 400mm 150 1300mm 15-30 V DC We reserve the right to make changes PAL_DMU418BX3LTVC_en_50124880.fm
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics
RK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-2- -N/E/S) Digital output
ENC-MC58SN-L R-L1
MC58/ MC59/ MC60 Hollow Shaft Magnetic Encoder Series FETURES DESCRIPTION Standard Encoder for Heavy Industrial pplications Hollow Shaft up to ø15mm 20 to 10,000 Cycles Per Revolution 80 to 40,000 Pulses
SENSORS S62. Compact Sensors - S62. The most complete universal sensor in a compact 50x50 mm housing. Sensors with red, infrared LED or LASER emission
Compact Sensors - S6 S6 The most complete universal sensor in a compact x housing Sensors with red, infrared or LASER emission from 3 cm to m Polarized retroreflective up to 0 m Multivoltage 4-40Vac/4-60Vdc
ULTRASONIC. Distance and Proximity Sensors. UFP / UPA Series. Key-Features:
ULTASONIC Distance and Proximity Sensors UFP / UPA Series Key-Features: Content: Technical Data...2 Technical Drawings...3 Electrical Connection...4 Teaching Guide...5 Sound Cones...6 Order Code & Accessories...7
V 180 Series Photoelectric Switches
D A T A S H E E T V 180 Series Photoelectric Switches VS 180 / VE 180 1 m x VL 180 m 1 m*) *) with polarizing filter v VT 180 110 mm 00 mm n Photoelectric switches of cylindrical design in threaded metal
Ultrasonic Sensor Diffuse Mode Sensor RU40U-M18E-LIU2PN8X2T-H1151
Smooth sonic transducer face Cylindrical housing M18, potted Connection via M12 x 1 male Teach range adjustable via pushbutton or adapter Temperature compensation Blind zone: 2.5 cm Range: 40 cm Resolution:
CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions
CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance
SU17 Series Fiber Optic Sensors
SU17 Series Fiber Optic Sensors Fiber Optic Diffuse and Thru-Beam Mode See page 750 Sensing Range: Determined by fiber optic cable Output: NPN, PNP Built-in auto-tuning Digital display Mutual interference
Photoelectric Sensors E3F2
Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel
Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
Material: Weight: IP Rating: Cable: Connector:
Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:
Sensor technologies Proximity sensors Series ST4. Brochure
Series ST Brochure 2 Series ST ST Sensor, Series ST with cable open cable ends, -pin Sensor, Series ST mm C-slot with cable Plug, M8, -pin 6 Sensor, Series ST mm C-slot with cable Plug, M8, -pin, with
Inductive sensor BI1.5-EG08K-Y1
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Selection matrix for electronic pressure switches
Selection matrix for electronic pressure switches Type / series 0500 050 050 05 050 0570 050 05 05 05 050 05 05 05 055 056 Page 09 09 7 0 5 5 5 5 9 9 9 9 9 9 Technology Measuring cell ceramic / thick-film
EZ Encoder : Optical Incremental
1. Introduction The EZ25 Encoder is a 2.5 incremental optical encoder, designed for optical shaft encoder motion control and precision sensor systems. Our ET7272 available models are short circuit proof
1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
senes FM Magnetic sensors for cylinders series FM100 - FM101 - FM157 - FM158 agnetic sensors for cylinders series
series FM100 - FM101 - FM157 - FM158 senes FM Magnetic sensors series "FM" allow to detect trie magnetic pistón position inside pneumatic cylinders. The magnetic field generated in trie cylinder is used
Inductive sensor With analog output BI15-M30-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M30 x 1.5 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring Diagram Type designation
DMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter Nominal pressure from 0... 6 bar up to 0... 600 bar Output
VersaTower Modulo multifunzione di cablaggi elettrici e di rete Modulo da pavimento Power/data Tower
Soluzioni elettrificate Electrical solutions VersaTower Modulo multifunzione di cablaggi elettrici e di rete Modulo da pavimento Power/data Tower 1 Dati commerciali / Commercial data Codice prodotto/product
Ultrasonic Sensor Diffuse Mode Sensor RU600U-EM30E-LIU2PN8X2T-H1151/3GD
ATEX II 3 G approval Gases and vapors IIC group, zone 2 Dusts IIIC group, zone 22 When used in Ex areas, the special conditions of the approval must be observed Safety clips to prevent inadvertent detachment
Online data sheet SGS4-S108P3PS2W03 SLG SWITCHING AUTOMATION LIGHT GRIDS
Online data sheet SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS A B C D E F H I J K L N O P R S T Detailed technical data Features Technology Ordering information
1 Inductive proximity switches. 5 Connecting cables. Highlights: New:
Highlights: - All-metal housings - Miniature sizes - Long operating distances - Extreme environmental conditions - Analog outputs New: - All-metal devices for food industry and sea-water applications -
Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.
Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous
ES H ITC ITY SW IM X PRO GENER AL C ATALOGUE INDUCTIVE SENSORS CAPACITIVE SENSORS MAGNETIC SENSORS
PROXIMITY SWITCHES G E N E R A L C ATA LO G U E INDUCTIVE Sensors CAPACITIVE Sensors MAGNETIC sensors www.automation.datalogic.com 2 D A T A L O G I C A U T O M A T I O N F O R I N D U S T R I A L A U
VersaFloor Botola elettrificata da pavimento Floor box
Soluzioni elettrificate Electrical solutions VersaFloor Botola elettrificata da pavimento Floor box Versafloor è un modulo precablato pratico e resistente. Il coperchio in metallo, calpestabile e resistente,
DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 6 bar up to 0... 600 bar Output signals -wire: 4... 0 ma -wire:
02/11/2015
24 x 48 Totalizers CTR24 non-backlit model Part number 87622062 Display : 8-digit LCD, height 8 mm Powered by a lithium battery Counter inputs : solid state (4-30 VDC) or voltage (10 260 VAC) Reset on
Contactless encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED LED indicates measuring range Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024,
W 190 L: Application-based Laser Technology, the optimum solution for demanding applications
Photoelectric proximity switches Photoelectric reflex switches W 90 L: Application-based Laser Technology, the optimum solution for demanding applications Do your customers require reliable sensors suitable
Absolute Encoders Multiturn
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft
DMP 331 DMP 331. Industrial Pressure Transmitter. for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial. tri-matic.
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter from 0... 00 mbar
Displacement Measuring System for Cylinder Series OSP-P
-SENSOFLEX Displacement for Cylinder Series OSP-P Overview...112 Technical Data SFI-plus...113 Dimensions SFI-plus...114 Order Information...115 111 Sensoflex - Sensoflex Displacement measuring system
W100L: Laser Sensor in Mini- Format
Product group W00 Laser Photoelectric proximity switch energ. Photoelectric reflex switch W00L: Laser Sensor in ini- Format Through-beam photoelectric switch Where applications demand it, the sensor can
DMP 339. Pressure Transmitter. with G ¼" flush diaphragm. Pressure Transmitter. Industrial. accuracy according to IEC 60770: 0.
DMP 9 Industrial Pressure Transmitter with G ¼" flush diaphragm accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter DMP 9 Nominal pressure from 0... 60 bar up to 0... 600 bar Output
LMP 305. Slimline Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.
Slimline Probe Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire: 4... 20 ma
Contactless Encoder Analog RI360P0-QR24M0-ELIU5X2-H1151
Compact, rugged housing Many mounting possibilities Status displayed via LED Measuring range indicated via LED Immune to electromagnetic interference Measuring range programmable via Easy Teach Output
Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements
NO: PH-165 PRODUCT: E3S-X3, E3X-NL, E3X-NM DATE: August 2012 TYPE: Discontinuation Update Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements Affected
MID-EX-E. Figure: MID-EX-E*010* ka052000en; Rev. 2.3 J
MID-EX-E Figure: MID-EX-E*010* J2013333 Robust and safe magnetic flow meter for general mining applications, optional with additional measuring Corresponds to the European standards EN 13849-1 (Performance
Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1.
Model Number Single head system Features IO-link interface for service and process data Programmable via DTM with PACTWARE programmable switch outputs Selectable sound lobe width Synchronization options
Incremental Hollow Shaft Encoder
www.scancon.dk Incremental Hollow Shaft Encoder RMHF Introduction Mini hollow shaft encoder (blind end) mm diameter - up to 00 pulses/turn Up to 0000 counts Std. IP ( option; Ribbon cable +IDC connector
Inductive linear position sensor LI300P0-Q25LM0-LIU5X3-H1151
Rectangular, aluminium / plastic Versatile mounting possibilities LED indicates measuring range Immune to electromagnetic interferences Extremely short blind zones 12 bit resolution 4-wire, 15 30 VDC Analog
Manual. Analog (U/I) Sendix M3661 / M3681. Sendix M3661R. Sendix M5861. Absolute multiturn encoder. Order code: 8.M36X1.XXXX.XX12
R60722.0002 - Index 3 Analog (U/I) Manual Absolute multiturn encoder Order code: 8.M36X1.XXXX.XX12 Order code: 8.M3661R.XXXX.XX12 Order code: 8.M5861.XXXX.XX12 Publisher Kübler Group, Fritz Kübler GmbH
7 SegmneDisplay Unit With High Bright Characters (D1SC-N : W32 H57mm, D1SA Series: W11 H22mm)
SC-N/SA Series 7 Segment Display Unit 7 SegmneDisplay Unit With High Bright Characters (SC-N : W32 H57mm, SA Series: W H22mm) Features Selectable decimal (0 to 9) or hexadecimal (0 to 9, A to F) indication
Smart-Encoder : Optical Incremental
1. Introduction The Smart-Encoder effectively eliminates multiple encoder part numbers by bringing intelligence and security to its design. In seconds, a four-digit LED display with two push-buttons enables
W 9-2: A Versatile, Complete and Compact Series
suitable sensor can be selected from the W 9- series. Overview of the sensors: WT 9-, with adjustable background suppression, max. scanning distance 0 mm, WT 9-, energetic, max. scanning distance 0 mm,
AC 2-wire Inductive Sensors
Tubular, M12 1 AC-sensors are optimized for controllers with alternating current inputs. When maintaining the rated operating current, the sensors can directly control fuses and relays. Housing size M12
TPHADA TRANSMITTER FOR HIGH PRESSURE WITH DIGITAL AUTO-ZERO & SPAN
TPHADA TRANSMITTER FOR HIGH PRESSURE WITH DIGITAL AUTO-ZERO & SPAN Main features Ranges: from: 0...1000 to 0...5000 bar Output signal 4...20mA 2 wires / 0,1...5,1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc
Contactless Encoder Incremental: ppr RI360P0-QR24M0- INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
Cylindrical Photoelectric Sensor CY-100 SERIES
Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector
RCA PLUGS & JACKS Bulk Pkg (2) Bulk Pkg (2) Bulk Pkg (2) Bulk Pkg (2)
RCA PLUGS & JACKS 24-100-0 Bulk 24-100-2 Pkg (2) Metal body RCA plug. Maximum cable dia. 7.5mm 24-104-0 Bulk 24-104-2 Pkg (2) Metal plug with strain relief. Maximum cable dia. 4.5mm Use 84-156-1 tool for
Sensor technologies Distance measuring sensors Series SM6. Brochure
Series SM6 Brochure Series SM6 6 mm groove with cable without wire end ferrule, tin-plated, -pin with distance measuring sensor, measurement range - 56 mm 6 mm groove with cable Plug, M8x, -pin, with knurled
LWC Series LWC-80. Design. LWC Series Laser Wire Counters. Product name: Accessories: LWC-80
LWC Series LWC-80 Laser Wire Counting - Insensitive to outside light (due to interference filter, modulated light) - Visible laser spot (red light 670 nm) - Parameterisable through integrated switch and
Magnetic field sensor for pneumatic cylinders BIM-IKT-Y1X
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 17 mm Metal, GD-Zn Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features
Description Page 1 of 8 The EM1 is a transmissive optical encoder module. This module is designed to detect rotary or linear position when used together with a codewheel or linear strip. The EM1 consists
AP-40. AP-40 Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display
AP-34 Separate Amplifier Type Sensor Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display Description Industry's smallest & lightest
Super Side. Sense type
Front ense type Photoelectric ensor Photoelectric ensor series uper ide ense type uper ide-sense Type projects the beam from the mm (.9 inch) of wide edge of the sensor. M pig-tail connector types are
Operating Instructions
CNTX Contrast sensor Operating Instructions CAUTIONS AND WARNINGS SET-UP DISTANCE ADJUSTMENT: As a general rule, the sensor should be fixed at a 15 to 20 angle from directly perpendicular to the target
Contactless Encoder IO-Link Ri360P0-QR24M0-IOLX2-H1141
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 16 bits singleturn Process value in 32 bit telegram 3 error bits 16 bits singleturn 15
Linear encoders without bearings incremental System for linear motion feedback
Features Robust magnetic sensing method Output signals A 90 B with index signal Output circuits: HTL/push-pull and TTL/RS422 Resolution up to 5 µm (4-times evaluation) Non-contact, wear-free sensing system
Inductive Proximity Switches. Sensing Distance mm. Itemgroup 230
S E N S O R E N F Ü R A U T O M A T I O N Sensing Distance 60-120 mm Itemgroup 230 Inductive Proximity Switches 2 or 4 wire connection - all current or PNP - cable or plug connection - short-circuit proof
Electrical connection
Color sensors Dimensioned drawing en 02-2013/01 50121262 068-14515 12mm 32mm 10-30 V DC 500 Hz Scanner for color detection Simultaneous selection of up to 3 colors Detection independent of distance Teach-in
- special pressure ranges - variety of electrical and mechanical. Characteristics. - other versions on request
DMP Industrial Pressure Transmitter for Low Pressure piezoresistive stainless steel sensor O p t i o n : f l u s h v e r s i o n accuracy: 0.75 %, 0.5 %, 0.0 %, 0.05 % FSO BFSL (0.5 %, 0.5 %, 0. %, 0.
Technical specifications UPK 500 UPK 1000 UPK 2500 UPK 5000
Ultrasonic distance and proximity sensors UPK Series Measuring distances from 80mm up to >5m High detection sensitivity Very low profile, small size Versions with analogue and/or binary output Versions
Electrical connection
Splice sensor Dimensioned drawing en 04-2014/06 50116166-01 4mm 12-30 V DC We reserve the right to make changes DS_IGSU14CSD_en_50116166_01.fm Reliable detection of splice on paper web or plastic web With
CAPACITIVE SENSORS KAS. Series 26. Level Control Food Industry Pharmaceutical Industry Semiconductor Industry Chemical Industry
CAPACITIVE SENSORS KAS Series 26 Level Control Food Industry Pharmaceutical Industry Semiconductor Industry Chemical Industry Registrier-Nr.: 1327-01 Testing laboratory accredited according to DIN EN 45001
Incremental Hollow Shaft Encoder
www.scancon.dk Incremental Hollow Shaft Encoder SCH32B Introduction Mini hollow through shaft encoder Std. IP 65 Thermal shutdown at 155 C Strong compact electronics Based on 2 precision ball bearings,
Magnetic Field Sensor for pneumatic cylinders BIM-IKT-Y1X
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
VISION. Data VS2 DATAVS2. Phone: Fax: Web:
DATAVS2 The DataVS2 vision sensor series presents all the characteristics to solve machine vision applications in a flexible and intuitive way. DataVS2 is a completely embedded device: the optic, the LED
Dimensions. Model Number. Electrical connection. Features. Pinout Product information. Indicators/operating means. LGS25 Serie.
Q Dimensions Transmitter Detection field + 9. Detection field 7.8 n Beam. Beam Receiver III 0. 0 Fix H H H Fn Model Number Light grid with fixed cable with -pin, M x connector, and fixed cable with 8-pin,
High Resolution Multicolor Contrast Scanner. Dimensioned drawing
Specifications and description KRTM 20 High Resolution Multicolor Contrast Scanner Dimensioned drawing en 01-2011/06 50116669 12mm 20mm 50mm 12-30 V DC 50 / 25 khz We reserve the right to make changes
COILS COUPLING TABLE COILS/ELECTROPILOTS ELECTROPILOTS/SOLENOID VALVES. Electropilots. Coils. Solenoid valves G6 GL6.
COUPLING TABLE COILS/ELECTOPILOTS ELECTOPILOTS/SOLENOID VALVES Electropilots A B AA(U1) AA(U3) AB (U2) Coils U04 U05 U1 U2 U3 10 mm 15 mm 22 mm 30 mm 30 mm BE AE BD ACN CL CM ISO 1 ISO 2 ISO 3 ISO 4 ISO