Cal D. In case your watch needs to be repaired or to raise claims under a guarantee, please contact the point of sales

Size: px

Start display at page:

Download "Cal D. In case your watch needs to be repaired or to raise claims under a guarantee, please contact the point of sales"

Nickolas Owen
5 years ago
Views:

1 Cal. 50.D User s Manual Brief specifications Description of the display and control buttons Setting the time / date Operation of the chronograph n case your watch needs to be repaired or to raise claims under a guarantee, please contact the point of sales

2 Cal. 50.D Description of the display and control buttons Brief specifications Time/Date Hour hand Minute hand Small second hand (position 3h) Date (position h) Chronograph up to hours (position h) up to minutes (position 9h) Centre stop-second General Battery type: 395 (diameter 9.5mm x.mm / SR 97 SW) ccuracy: + / - seconds per month Display elements Second hand Minute hand Hour hand Centre stop-second Date 0 Control buttons Push button Crown Push button B 1 17

3 Second hand Setting the time Setting the date (quick mode) 0 *Pull out the crown to position (the watch stops). Turn the crown until you reach the correct time : Pull out the crown to position (the watch continues to run). Turn the crown until the correct date 1 appears. *Push the crown back into position. Push the crown back into position. 0 1 * n order to set the time to the exact second, must be pulled out when the second hand is in position «0» (). Once the hour and minute hands have been set, must be pushed back into position at the exact second During the date changing phase between 9 PM and PM; the date must be set to the date of the following day.

4 0 17 Crown Date Setting the date/time following a battery change Date / time on the watch: 17 / 1:5 M Present date / time: / : PM Pull out the crown to position (the watch continues to run). Second hand 0 3 **Pull out the crown to position (the watch stops). **Turn the crown until the correct date appears. **Continue to turn the crown until the correct time : PM appears. 0 3 Turn the crown until yesterday s date appears 3. 0 **Push the crown back into position. **To set your watch to the exact second, please refer to the chapter entitled «setting the time». **Please observe the M/PM clock rhythm.

5 Chronograph: The chronograph s hour counter measures times up to hours. The minute counter measures minutes per rotation. The center stop-second measures 0 seconds per rotation.. Display elements Centre stop-second 0 Control buttons Push-button (Start / Stop) (Reset) Before using the chronograph functions, please ensure that: the crown is in position (= normal position). the 3 chronograph hands are precisely at zero position following activation of push-button B. Should this not be the case, the positions of the hands must be adjusted (see the chapter entitled «adjusting the chronograph hands to zero position»). Push-button Chronograph: Basic function (Start / Stop / Reset) Start: Press push-button. Stop: to stop the timing, press pushbutton once more and read the three chronograph hands: 1h / min / sec. Zero positioning: Press push-button B. (The three chronograph hands will be reset to their zero positions).

6 Push-button 0 0 Chronograph: ccumulated timing Start: (start timing) Stop: (e.g. min 5 sec following ) Restart: (timing is resumed) *Stop: (e.g. 13 min 5 sec following ) = min sec (The accumulated measured time is shown) Reset: The three chronograph hands are returned to their zero positions. * Following, the accumulation of the timing can be continued by pressing pushbutton (Restart / Stop, Restart / Stop, ) 0 0 Push-button 5 Chronograph: ntermediate or interval timing Start: (start timing) Display interval: e.g. minutes seconds (timing continues in the background) * Making up the measured time: (the 3 chronograph hands are quickly advanced to the ongoing measured time). Stop: (Final time is displayed) Reset: The 3 chronograph displays are returned to their zero position * Following, further intervals or intermediates can be displayed by pressing push-button B (display interval / make up measured time,...)

7 0 0 Center stop-second Push-button djusting the chronograph hands to zero position One or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following a battery change). Pull out the crown to position (all 3 chronograph hands are in their correct or incorrect zero position). Keep push-buttons and B depressed simultaneously for at least seconds (the centre stop-second rotates by 30 corrective mode is activated). B B 7 djusting the centre stop second Single step 1 x short Continuous long djusting the next hand B djusting the hour counter hand (position h) Single step Continuous 1 x short long djusting the next hand B djusting the minute counter hand (position 9h) Single step 1 x short Continuous long Returning the crown to position Termination of the chronograph hands adjustment (can be carried out at any time).

Movement Caliber Cal.5030D

Presentation INFO Movement Caliber Cal.5030D Battery: 395 (diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month Display Elements Minutes Hand Hour Hand Day Retrograde Second Hand Centre