HUAWEI TECHNOLOGIES CO., LTD. ODN Products Series

Transcription

1 HUAWEI TECHNOLOGIES CO., LTD. ODN Products Series

2

3 CONTENTS ODN Products Series EasyODN... 1 ODF Product... 4 ODF2101-CH Series... 5 ODF2101-FH Series... 6 GPX147-B Series... 7 ODF Module... 8 FDT Product... 9 FDT2201D FDT2101D FDT2102D FDT2103D series FAT Product FAT3101/FAT3101D Series FAT3201&FAT3202 Series FAT3203D Series FAT3204D Series Splitter Products SPL1202 Series SPL1101 Series SPL9101 Series SPL9102/9103 Series Indoor Wall-mounted Splitter Unit Closure Products Dome Mechanical Seal Closure Series Accessories Fiber Adapter Pigtail Patch Cord Optical Cable Products Duct or non self-supporting aerial Optical Cable Self-supporting aerial Optical Cable Direct Buried Optical Cable Indoor Cable and Drop Cable... 34

4 EasyODN The optical distribution network (ODN) is an indispensable path for transmitting Enterprise Business Group data and directly affects the performance, reliability, and scalability of an Enterprise Business Group system. Huawei provides a comprehensive series of ODN products to deliver fast ODN customization services to enterprises worldwide. An Enterprise Business Group system consists of three parts: optical line terminal (OLT), optical distribution network (ODN), and optical network terminal (ONT). The ODN, an integral part of the Enterprise Business Group system, resides as the physical path for optical transmission between the OLT and the ONT. Its reach is 20 km or farther. Within the ODN, optical fibers, connectors, splitters, and auxiliary components collaborate with each other. The ODN specifically has five segments: feeder fiber, optical distribution point, distribution fiber, optical access point, and drop fiber. The feeder fiber starts from the optical distribution frame (ODF) in the central office (CO) telecommunications room and ends at the optical distribution point for long-distance coverage. The distribution fiber from the optical distribution point to the optical access point distributes optical fibers for areas alongside it. The drop fiber connects the optical access point to terminals (ONTs), achieving optical fiber drop into user homes. Statistics show that outlays of the ODN account for 50% to 70% of the total Enterprise Business Group investments, greatly influencing the comprehensive Enterprise Business Group costs. In addition, the ODN is the very path essential to Enterprise Business Group data transmission and its quality directly affects the performance, reliability, and scalability of the Enterprise Business Group system. OLT Feeder optical cable Optical distribution point Distribution optical cable User access point Drop cable ONT Indoor FTTC FTTB Equipment room inside a building FTTH Curb Manhole Manhole Manhole Outdoor pole or wall-mounting Indoor CO Outdoor underground Figure 1 ODN structure 1

5 EasyODN Huawei s EasyODN Solution As an experienced access network solution leader in the world, Huawei has deep understanding and rich experience in Enterprise Business Group construction and provides services for enterprises worldwide, including ODN project consultancy, network planning, network design, and engineering implementation. 1. Best Economic zproject Consultancy Huawei provides the consultant-assisted project consultancy service by comprehensively analyzing the feasibility of an ODN project based on the service demand, network buildout goal, as-is network and service status, and investment budget of enterprises. This service dramatically mitigates the network build out risks facing enterprises. znetwork Planning Huawei provides suggestions and estimated budgets on the optimal network planning scheme after analyzing the Enterprise Business Group demands of enterprises and relevant constraints, such as population distribution, user distribution, service take-up, live network resources, civic planning, and civic roads and pipes. zcomprehensive series of ODN products Huawei provides a comprehensive series of ODN products for various networking scenarios, achieving optimal networking. 2. Fast Deployment Based on rich engineering experience, Huawei concentrates efforts into engineering efficiency improvement by optimizing product design and engineering technologies to achieve fast Enterprise Business Group deployment. For example, the air-blown micro cable with the industry s smallest gauge is used, maximizing the pipe utilization. In addition, the user-friendly building-entry and house-entry products such as the industry s innovative fiber access terminal (FAT) are provided, facilitating the inside plant (ISP) engineering. Furthermore, Huawei provides fast product customization or integration for meeting enterprises ODN construction requirements and accelerating service launching. Huawei is an experienced optical access leader who has engaged in multiple optical network deployments and turnkey projects. Leveraging its rich experience in the ODN, Huawei is highly competent to deliver high-quality ODN projects desired by customers against the deadline. 2

6 EasyODN 3. Easy Management (iodn) To cope with management for mass optical fibers brought by scale of Enterprise Business Group deployments, Huawei launches the first iodn system in the industry. iodn is endowed with multiple intelligence functions, such as automatically identifying and managing optical fiber connections, intelligently indicating optical fiber connection operations, and intelligently managing optical splitters. Using iodn, enterprises can automatically find out the target optical fiber and appropriately operate it, paving the way for massive Enterprise Business Group rollouts. Ongoing EasyODN Deployments in the Globe Huawei s EasyODN has so far participated in multiple ODN projects worldwide, helping enterprises minimize network buildout risks, improve network deployment efficiency, and shorten time-to-market of services. The one-stop service package of the OLT, ODN and ONT provided by Huawei enables carriers to drive down management expenditure and accelerate service provisioning. Backed by a pool of competent R&D engineers and globally-assigned technical support professionals, Huawei is quickly and efficiently responsive to enterprises customization demands and network deployment issues. By half 2010, Huawei has delivered premium ODN products with approximately 300,000 user lines to Etisalat and won high praise with the superb product design and fast and flexible delivery. Huawei is now rising as the largest ODN supplier of Etisalat. Huawei has also helped BSNL, the largest carrier in India, build out India s first commercial GPON network whose reach is into Indian major large and mediumsized cities. Within just a half year, Huawei has delivered 33,000 wall-mounted optical splitters targeting at approximately 330,000 user lines. Moreover, Huawei has delivered a series of GPON network-wide end-toend turnkey projects including the national broadband network (NBBN) of Maxis in Malaysia, the first commercial GPON network of VNPT in Vietnam, and the Qatar NBBN. Omantel and Bahrain Telecom have selected Huawei as their only GPON E2E turnkey partner and likewise BT has selected Huawei as its exclusive supplier for WDM1r. In the mobile field, Huawei s EasyODN has helped mobile carriers like Shyam Telelink in India, American Movis in Chile, Mobile in Yemen, MTN in Rwanda, Intercellular in Nigeria, to achieve mobile backhaul of base stations. By Dec 2010, Huawei s EasyODN has serviced 38 worldleading carriers, such as China Telecom, China Unicom, China Mobile, Nucleus Connect (NC), Saudi Telecom Company (STC), and Romania Telecom. Leveraging its rich experience, standard and streamlined workflows, premium products, and continued innovations, Huawei has gained a strong foothold in the ODN segment and has been recognized as the best partner of carriers. 3

7 ODF Product Overview The ODF (Optical-fiber Distribution Frame) is used for connection and patching of optical cables, mainly used as the interface between optical transmission network and optical transmission equipment and between optical cables in access network of optical fiber subscribers. Performance Indices: Operating temperature: -10 ~+45 Storage temperature: -40 ~+65 Operating humidity: 85%(+30 ) Air pressure:70 KPa~106 KPa Insulation resistance between high-voltage protection ground and rack (cabinet) >1000MΩ (DC 500V) Dielectric withstanding voltage between high-voltage protection ground and rack (cabinet) DC 3000V for 1min without arcing and breakdown Standard Compliance Comply with IEC , IEC , IEC , IEC etc international standards and YD/T 778, GB/T 2423, GB/T 3873, GB/T 9286, GB/T 3047 etc China national standard 4

8 ODF Product ODF2101-CH Series Complete front operations Applicable to large-capacity optical fiber communication engineering 19 inch standard cabinet with termination unit and integrated splicing & termination unit, splicing unit and splitter unit Type Dimensions (H W D) mm Capacity Weight Kg ODF2101-CH ODF2101-CH ODF2101-CH

9 ODF Product ODF2101-FH Series Rack without doors Complete front operations Applicable to large-capacity optical fiber communication engineering 19 inch standard cabinet with termination unit and integrated splicing & termination unit, splicing unit and splitter unit Type Dimensions (H W D) mm Capacity Weight Kg ODF2101-FH x 800 x ODF2101-FH x 800 x ODF2101-FH x 800 x

10 ODF Product GPX147-B Series Indoor wall-mounted installation Front operations, support jump-fiber route Standard 12-fiber splicing tray, flexible for capacity increasing just by adding splicing tray Support FC and SC type Adapters, adopting a convenient installation mode with a tilt of 35, avoid accidentally injure the eyes Separate function area and easy to operation and maintenance Type Dimensions (H W D) mm Capacity Weight Kg GPX147-B GPX147-B GPX147-B GPX147-B

11 ODF Product GPX147-B Series Integrated Splicing & Termination Unit 19inch rack-mounted, suit ETSI standard mounted Provide the splicing and termination functions Compact structure, suit 300mm depth cabinet Type Dimension mm Capacity GPX147-GRP-72A 4U GPX147-GRP-48A 3U GPX147-GRP-24A 2U GPX147-GRP-12A 1U Optical Entry Unit 19 inch rack-mounted suit ETSI standard mounted For the optical cable entry, grounding and mounting reliable Type Dimension mm Weight kg GYR-1 5U Fiber Spool Unit 19 inch rack-mounted, suit ETSI standard mounted Use to store the redundant patch cords Type Dimension mm Weight kg GPX147-FH-PQU 4U Base The height can be adjust, and the step is 5mm Type Dimension mm Weight kg Height mm GPX147-R-DZA H ~325 GPX147-R-DZB H ~615 8

12 FDT Product Overview The FDT (Fiber Distribution Terminal) is used for achieving connection and grooming of optical cable. It is mainly suitable for optical cross-connecting point between optical transmission network, optical transmission equipment and access network for the fiber subscribers. Performance Indices: Operating temperature: -10 ~+45 Storage temperature: -40 ~+65 Operating humidity: 85%(+30 ) Air pressure:70 KPa~106 KPa Fireproof level: in conformity with the requirement for level UL 94 V0 Suitability for any adverse environment, Protection level: IP65 Dielectric withstanding voltage > DC 3000V, in 1min, without breakdown and arc Insulation resistance R>2 104MΩ/ 500V DC Mechanical strength: Each surface of the cabinet can bear a vertical pressure of more than 980N and the edge of the door can bear a vertical pressure of over 200 N when the door is open. The mounting position of the optical cable can bear an axial pull of 1000 N and three times of circular rotation by±90 in total Standard Compliance Comply with EN , ETSI , ETS AMD, GR 487 R3-198, IEC 60529, IEC , UL94 etc international standards and YD/T 988, GB/T 2423, GB/T 3873, GB/T 9286, GB 4208 etc China national standard 9

13 FDT Product FDT2201D-576 Good heat isolation performance: SMC cabinet Front and rear operation, occupy smaller space Configured 19 standard optical splitter unit inside Modular design, easy expansion Type Dimensions (H W D) mm Capacity Weight Kg FDT2201D x 755 x (SC)

14 FDT Product FDT2101D-480 Modular design, easy expansion Good heat isolation performance: SMC cabinet Complete front operation, support to be installed near the wall Separated operation area, easy maintenance Type Dimensions (H W D) mm Capacity Weight Kg FDT2101D x 1455 x (SC) 960 (LC)

15 FDT Product FDT2102D-288 Configured 19 standard unit Modular design, easy expansion Good heat isolation performance: SMC cabinet Complete Front operation, support to be installed near the wall Type Dimensions (H W D) mm Capacity Weight Kg FDT2102D x 760 x (SC)

16 FDT Product FDT2103D series Support grounding installation, wall-mounted installation, pole mounted installation With 8 grooves for splitter mounted, support modular splitter Provide a parking area for the redundant fibers management The self-limited integrated splicing and termination tray and self-limited splicing tray is installed in guide rail mode Stainless steel make it anticorrosive splitter Parking area self-limited splicing & Termination tray self-limited splicing tray Base Type Dimensions (H W D) mm Capacity Weight Kg FDT2103D FDT2103D

17 FAT Product Overview FAT (Fiber Access Terminal) is located at the user access point of Enterprise Business Group-ODN for connecting the optical distribution cables and drop cables, direct connection, branching and protection of optical fibers. Performance indexes: Operating temperature: -40 ~+65 Storage temperature: -25 ~+55 Operating humidity 95% (+40 ) Air pressure:70 KPa~106 KPa Standard Compliance Comply with EN , IEC 60529, IEC , ITU.TL.51, Telcordia GR-1209-Core, Telcordia GR Core, UL94 etc international standards and GB/T 2423, GB/T 3873, GB/T 9286, GB 4208 etc China national standard 14

18 FAT Product FAT3101/FAT3101D Series Capacity: 6-fiber, 12-fiber, 18-fiber With straight through and branch function; Compatible for U type cabling Convenient for open repeat, easy to seal Support wall-mounted and pole mounted installation, satisfied different application scenarios Protection grade :FAT3101 IP42,FAT3101D IP65 Splicing tray Install accessories Waterproof block Type Dimensions (H W D) mm Capacity Weight Kg FAT FAT FAT FAT3101D FAT3101D FAT3101D

19 FAT Product FAT3201&FAT3202 Series Tiered structure design, Easy to operate and maintain without interference Supports straight-through and branching Compatible with fusion splicing and mechanical splicing and fast assembly connector, short the time to market Double-layer structure provides enough space for operations FAT3202 supports to install splitter Protection grade: IP52 FAT3201 FAT3202 ISP Interface Splicing Tray Splitter Type Dimensions (H W D) mm Capacity Weight Kg FAT FAT FAT FAT FAT FAT FAT FAT

20 FAT Product FAT3203D Series FAT3203D-12 Tiered structure design, Easy to operate and maintain without interference Supports the entry of flat drop cable (2mm x 3mm) and round drop cable (Ф5 mm ~ Ф7 mm) Support fusion splicing, mechanical splicing and field assemble (FA) connector, short the time to market Capacity: 6-fiber, 12-fiber, 18-fiber, satisfies different application scenarios Outdoor installation. Protection grade: IP55 Compatible for direct connection, branching and splitting Compatible for wall-mounted and pole-mounted Splitter Splicing tray FAT3203D-12/18 Install accessories Type Dimensions (H W D) mm Capacity Weight Kg FAT3203D FAT3203D FAT3203D

21 FAT Product FAT3204D Series Compatible for splicing, termination and splitting function Easy to operate and maintain without interference Separated splitting and splicing area, easy to install the splitter Supports the entry of flat drop cable (2mm x 3mm) and round drop cable (Ф5 mm ~ Ф7 mm) Support fusion splicing, mechanical splicing and field assemble (FA) connector, short the time to market Outdoor installation. Protection grade: IP55 Compatible for direct connection, branching and splitting Compatible for wall-mounted and pole-mounted Install accessories Splicing tray Splitter Optical Entry Unit Type Dimensions (H W D) mm Capacity Weight Kg FAT3204D x

22 Splitter Products Overview Splitter, which is a branched of passive fiber, is a passive equipment to connect optical line terminal and optical network unit, its function is to distribute down-link data and integrate up-link data. Performance indexes: Operation temperature: -40 to +85 Storage temperature: -40 to +85 Operation humidity: 93% (+30 ) Atmospheric pressure: 70 kpa to 106 kpa Standard Compliance Comply with EN , ETSI , ETS AMD, GR 487 R3-198, IEC 60529, IEC , UL94 etc international standards and YD/T 988, GB/T 2423, GB/T 3873, GB/T 9286, GB 4208 etc China national standard Technical Parameters Splitting Ratio Insertion Loss db WDL db TDL db Return Loss db Uniformity db PDL db Directivity Loss db Optical Power mw 1:2 FBT :4 PLC :8 PLC :16 PLC :32 PLC :64 PLC (PC) (APC) 55 2:2 FBT :4 PLC :8 PLC :16 PLC :32 PLC :64 PLC Remark: The insertion loss of splitter is under normal temperature and the loss of connector is not included. 19

23 Splitter Products SPL1202 Series Standard 19 inch rack-mount structure, compatible with ETSI installation Large capacity, High density, 8 2:2-splitter can install in an 1U cell Guide rail and tray structure, convenient for maintenance Space lever in guide rail to prevent the tray dropping off Operation area Splitting area Splitter Type Dimensions (H W D) mm Split ratio SPL1202-1U 1U N:2, N:4, N:8, N:16, N:32 (N=1, 2) SPL1202-2U 2U :64 20

24 Splitter Products SPL1101 Series The uniform split ratio ranges from 1 2 to 1 64 The optical power distribution of non-uniform splitters includes 5/95, 10/90, and 30/70 This optical splitter module contains 3m pigtail, which is convenient for connections Support salver-installation and box-installation Type Dimensions (H W D) mm Split ratio SPL F :2-FBT SPL F1002A :2-FBT-5/95 SPL F1002B :2-FBT-10/90 SPL F1002C :2-FBT-30/70 SPL P :4-PLC SPL P :8-PLC SPL P :16-PLC SPL P :32-PLC SPL P :64-PLC 21

25 Splitter Products SPL9101 Series As a separated splitter, it can be installed in the FDT, closure, FAT etc for splitting Small size with large capacity meets the flexible requirement of network construction Modular design and same size for different split radio With different color pigtails as inlets(green) and outlets (yellow) of splitter easy to division Easy operation and maintenance without tools Supply different adapter such as SC/APC, SC/UPC, FC/ UPC, LC/APC and LC/UPC Type Dimensions (H W D) mm Split ratio SPL F :2 FBT SPL P :4 PLC SPL P :8 PLC SPL P :16 PLC SPL P :32 PLC SPL P :64 PLC SPL F :2 FBT SPL P :4 PLC SPL P :8 PLC SPL P :16 PLC SPL P :32 PLC SPL P :64 PLC 22

26 Splitter Products SPL9102/9103 Series Small size with large capacity meets the close application scenario SPL9102 used in splicing tray without connecter SPL9103 have pigtails with SC/APC, SC/UPC, FC/UPC, LC/APC or LC/UPC connecters SPL9102 SPL 9103 Type Dimensions (H W D) mm Split ratio SPL F1002 Ф3 55 1:2-FBT SPL P :4-PLC SPL P :8-PLC SPL P :16-PLC SPL P :32-PLC SPL P :64-PLC SPL F2002 Ф3 55 2:2-FBT SPL P :4-PLC SPL P :8-PLC SPL P :16-PLC SPL P :32-PLC SPL F1002 Ф3 55 1:2-FBT SPL P :4-PLC SPL P :8-PLC SPL P :16-PLC SPL P :32-PLC SPL P :64-PLC SPL F2002 Ф3 55 2:2-FBT SPL P :4-PLC SPL P :8-PLC SPL P :16-PLC SPL P :32-PLC 23

27 Splitter Products Indoor Wall-mounted Splitter Unit Indoor wall-mounting installation Modular design, Compatible with fusion splicing, termination and splitting function Separate function area and easy operation and maintenance Compatible for direct connection, branching and splitting Type Dimensions (H W D) mm Split ratio FLQ4-P-GRP/SC 380x300x90 2:4 FBT FLQ8-P-GRP/SC 380x300x90 1:8 PLC FLQ16-P-GRP/SC :16 PLC FLQ32-P-GRP/SC :32 PLC 24

28 Closure Products Overview Closure is mainly used for connecting and branching in the optical fiber network; it is suitable for protecting of all kinds of optical fiber straight-through and branching. Performance indexes: Protection level: IP68 Operation temperature: -10 ~+60 Storage temperature: -40 to +70 Operation humidity: 95% (+30 ) Atmospheric pressure: 70 kpa to 106 kpa Normal temperature seal performance: Inside atmospheric pressure 40KPa,no bubbles indicating leakages is observed for 15 minutes below the water surface Temperature cyclic variation: After 20 cycles of the Temperature cyclic variation from -40 to +65, the appearance is not changed Static load:1000n/25cm2 Cable bending: The spot between the closure and seal fitting can bear bending tension at bending angle of ±30 for 5 circles Standard Compliance Comply with GR-487, IEC 60529, IEC , ITU-T L.13:2003, UL 94 etc international standards and YD/T814.1 etc China national standard 25

29 Closure Products Dome Mechanical Seal Closure Series Provide functions such as direct connection, branching, splitting, fusion splicing, and distribution Provide splitting function and termination function with bare optical splitter SupportΦ8~Φ20mm common optical cable,2 3mm the drop cable and theφ5/φ7mm round drop cable Protection grade :IP68 Satisfies to install in the manhole, in the hand hole, on the pole or on the wall Install accessories Splicing Tray Inlets and outlets Type Dimensions (L D) mm Capacity Weight Kg SSC Φ splicing 5 SSC Φ splicing 5 SSC Φ splicing 8 SSC Φ splicing 8 SSC2112T Φ termination 8 SSC Φ splicing 11 SSC2113T Φ termination 11 26

30 Accessories Fiber Adapter Low insertion loss; high intensity; counter-connection with high precision Zirconia ceramic mating-sleeve of split type Realizing core alignment with high precision Good interchangeability Good repeatability Stable environment performance Comply with IEC and GR326 standard Performance indexes: Adapter loss (insertion, interchange, repetition) 0.3dB SC/UPC SC/APC 2SC/UPC FC/UPC LC/UPC 2LC/APC 2LC/UPC FC-SC 27

31 Accessories Pigtail Good hardiness Good conversion performance High temperature stability Mate/demate cycles:500 without any degradation of the transmission quality Performance indexes: Completely comply with IEC (FC connector) Completely comply with IEC (SC connector) Completely comply with IEC (LC connector) the insertion loss is less than 0.3dB Return loss of single-mode fiber: SC/PC 45dB, SC/UPC 55dB, and SC/APC 60dB SC Pigtail FC Pigtail LC Pigtail Fan Out Pigtail 28

32 Accessories Patch Cord Both ends of pigtail are jumper Good hardiness Good conversion performance High temperature stability Mate/demate cycles:500 without any degradation of the transmission quality Performance indexes: Completely comply with IEC (FC connector) Completely comply with IEC (SC connector) Completely comply with IEC (LC connector) The insertion loss is less than 0.3dB Return loss of single-mode fiber: SC/PC 45dB, SC/UPC 55dB, and SC/APC 60dB FC-FC Patch Cord SC-SC Patch Cord LC-LC Patch Cord FC-SC Patch Cord LC-FC Patch Cord LC-SC Patch Cord 29

33 Optical Cable Products Overview Feeder cable section, distribution cable section and drop cable section are referenced the application of optical cable in ODN network. Cable Product: Cable Product: Application Duct Direct burial (all dielectric) Direct burial (steel tape armor) Air blown micro-duct Figure-8 self-supporting aerial All dielectric self support Indoor drop Indoor vertical and horizontal distribution Optical Cable Type GYTA, GYFTA, GYTS, GYFTY GYFTY63,GYFTY73,GYFTY83 GYTA53, GYFTA53, GYTY53, GYFTY53 GCYFTY GYTC8A, GYTC8S, GYFTC8Y ADSS GJXH, GJXFH, GJXFCH, GYXTZY GJPFJH,GJBFJH Attenuation of uncabled fiber (db/km) Chromatic dispersion (ps/nm.km) Coating Diameter (um) Attribute G.652D Value G.657A1 1310nm nm nm nm nm nm nm nm before colored 245±10 245±10 colored 250±15 250±15 Mode field Diameter at 1310nm (um) 9.2± ~9.5±0.4 Cladding Diameter (um) 125.0± ±0.7 Core concentricity error (um) Cladding non-circularity (%) Cabled Cut-off Wavelength (nm) Zero Dispersion Wavelength (nm) Zero Dispersion Slope ps/(nm².km) PMD link value ps/(km1/2) (M=20,Q=0.01%) Individual Fiber Polarization Mode Dispersion ps/(km1/2) Uncabled fiber macrobending loss (db) Proof Test (%) 1.0 (0.69Gpa, 100kpsi) 1.0 (0.69Gpa, 100kpsi) Fiber Curl (M) Radius (mm) Turns nm nm

34 Optical Cable Products Duct or non self-supporting aerial Optical Cable G.652D fiber, latest ITU-T Rec. compliant The Polybutylene Terephthalate (PBT) loose tube has favorable waterproof performance and high strength. It is filled with special ointment, which can protect optical fibers The PE sheath has fine anti-ultraviolet performance and a small friction factor for optical cable installation The compact structure of the optical cable resists tube shrinkage Complies with standards IEC and YD/T 901 Type Construction Capacity Feature GYTA GYFTA Outer sheath APL Loose tube Optical fiber Tube filling compounds Central strength member Cable filling compounds Filler 8~144 Laminated Aluminum tape sheath Al tape as additional moisture barrier Outer sheath PE-steel-PE(PSP) Loose tube Optical fiber Tube filling compounds Central strength member Cable filling compounds Filler GYTS 8~144 Outer sheath Loose tube Optical fiber GYFTY Tube filling compounds 8~144 Central strength member Cable filling compounds Central strength member GYDGA GCYFTY Tube filling compounds 6-48 Filler Outer sheath Aluminum laminated tapc Water blocking tapc Ribbon identification Slotted core Ribbon fiber 6c ribbon Ripcord Water blocking yarn Outer sheath Loose tube Optical fiber Central strength member Cable filling compounds Filler Corrugated steel tape sheath Steel tape as anti-rodent layer All dielectric, no metallic element All dielectric for anti-lightning Slotted ribbon structure Al tape as additional moisture barrier Small size, light weight Best choice for air-blown application in micro duct and bundle tube 31

35 Optical Cable Products Self-supporting aerial Optical Cable G.652D fiber, latest ITU-T Rec. compliant The self-supporting design is highly efficient for cable installation The PBT loose tube has favorable waterproof performance and high strength. It is filled with special ointment, which can protect optical fibers The PE sheath has good anti-ultraviolet performance Complies with standards IEC and YD/T 901. Type Construction Capacity Feature Hanging steel wires Outer sheath PSP Loose tube Optical fiber GYTC8S 8~144 Tube filling compounds Central strength member Cable filling compounds Filler Suspension wire for self support Corrugated steel tape as antirodent layer Hanging steel wires Outer sheath GYTC8A GYFTC8A APL Loose tube Optical fiber Tube filling compounds Central strength member 8~144 Suspension wire for self support Al tape as additional moisture barrier Cable filling compounds Filler Hanging steel wires Outer sheath Loose tube Optical fiber GYFTC8Y 8~144 Tube filling compounds Central strength member Cable filling compounds Filler Suspension wire for self support Anti-lightning cable core Outer sheath Aramid yarn Inner sheath Loose tube Optical fiber Tube filling compounds Central strength member Cable filling compounds Filler ADSS 8~144 All dielectric self-support Suitable for high voltage power line environment 32

36 Optical Cable Products Direct Buried Optical Cable G.652D fiber, latest ITU-T Rec. compliant The PBT loose tube has favorable waterproof performance and high strength. It is filled with special ointment, which can protect optical fibers The PE sheath has good anti-ultraviolet performance and a small friction factor for optical cable installation The compact structure of the optical cable resists tube shrinkage Complies with standards IEC and YD/T 901 Type Construction Capacity Feature GYFTY53 Optical fiber 8~144 GYTY53 Optical fiber 8~144 GYTA53 GYFTA53 Outer sheath PE-steel-PE(PSP) Inner sheath Loose tube Tube filling compounds Central strength member Cable filling compounds Filler Outer sheath PE-steel-PE(PSP) Inner sheath Loose tube Tube filling compounds Central strength member Cable filling compounds Filler Outer sheath PE-steel-PE(PSP) Inner sheath APL Loose tube Optical fiber Tube filling compounds Central strength member Cable filling compounds Filler Outer sheath Aramid yarn Inner sheath Loose tube 8~144 GYFTY63 Optical fiber 8~144 Tube filling compounds Central strength member Cable filling compounds Filler Outer sheath Glass yarn Inner sheath Loose tube GYFTY73 Optical fiber 8~144 Tube filling compounds Central strength member Cable filling compounds Filler Outer sheath Glass yarn Inner sheath Loose tube GYFTY83 Optical fiber 8~144 Tube filling compounds Central strength member Cable filling compounds Filler Double sheath for crush resistance Corrugated steel tape as antirodent layer Non-metallic central strength member Double sheath for crush resistance Corrugated steel tape as antirodent layer Steel wire central strength member Double sheath for crush resistance Corrugated steel tape as antirodent layer Al tape as additional moisture barrier Double sheath for crush resistance FRP and aramid yarn as strength member All dielectric for anti-lightning Double sheath for crush resistance FRP and glass yarn as strength member All dielectric for anti-lightning Double sheath for crush resistance FRP and glass yarn tape as strength member All dielectric for anti-lightning Rodent retardant 33

37 Optical Cable Products Indoor Cable and Drop Cable The fiber is easy to strip and branch The optical cable is simple, lightweight, and functional The sheath material adopts LSZH with better characteristic of low-mist halogen-free fire-retardant Complies with standards IEC ,YD/T1258 and YD/T1997 Type Construction Capacity Feature LSZH Tight buffer fiber Central strength member GJPFJH 36~72 Suitable for indoor vertical distribution Tight tube fiber is easy to strip and branch LSZH Wrap tapc Subunit Central strength member GJBFJH 4~24 Suitable for indoor vertical distribution Tight tube fiber is easy to strip and branch H H FRP Optical fiber GJXFH 1~2 W W Adopts the G.657A optical fibers Nonmetal strength member LSZH jacket H H Steel wire Optical fiber GJXH 1~2 W W Adopts the G.657A optical fibers Metal strength member LSZH jacket H H 1.2mm steel wire LSZH jacket GJXFCH 1~2 W Steel wire Optical fiber W Adopts the G.657A optical fibers Self-supporting metal strength member LSZH Aramid yarn Loose tube GYXTZY 2~12 Optical fiber Tube filling compounds Ripcord Adopts the G.657A optical fibers Central unit tube structure 34

38 Copyright Huawei Technologies Co., Ltd All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. General Disclaimer THE INFORMATION IN THIS DOCUMENT MAY CONTAIN PREDICTIVE STATEMENTS INCLUDING, WITHOUT LIMITATION, STATEMENTS REGARDING THE FUTURE FINANCIAL AND OPERATING RESULTS, FUTURE PRODUCT PORTFOLIO, NEW TECHNOLOGY, ETC. THERE ARE A NUMBER OF FACTORS THAT COULD CAUSE ACTUAL RESULTS AND DEVELOPMENTS TO DIFFER MATERIALLY FROM THOSE EXPRESSED OR IMPLIED IN THE PREDICTIVE STATEMENTS. THEREFORE, SUCH INFORMATION IS PROVIDED FOR REFERENCE PURPOSE ONLY AND CONSTITUTES NEITHER AN OFFER NOR AN ACCEPTANCE. HUAWEI MAY CHANGE THE INFORMATION AT ANY TIME WITHOUT NOTICE. HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen , P.R. China Tel: Version No.: M C-1.0