ESP-LXD Controller Decoder Programming Guide

Transcription

1 ESP-LXD Controller Decoder Programming Guide

2 Contents How To Use The Programming Guide... 1 Program and Decoder Information...1 Apply Decoder Address Labels...2 Fill Out Programming Guide...2 Sample Program Information...3 Sample Decoder Information...5 Barcode Scanning... 6 Barcode Scanning Pen Options...6 Barcode Scanning Pen Setup...7 Unitech MS100-RCB00-SG...7 Unitech MS Test Barcode Scanning Pen...9 Scan Field Decoder Addresses...10 Programming Program Information...12 Decoder Information...14 Symbols OTE: Symbol is intended to alert the user to important operating, functionality or maintenance or installation instructions. DIAL: Symbol indicates that the user is required to turn the dial on the controller to the appropriate setting in order to follow subsequent instructions as described in that section. REPEAT: Symbol indicates that a repetition of previous steps or actions may be required in order to continue or complete the controller programming process. For technical assistance contact Rain Bird at or EU : Visit us on the web at Storing the Programming Guide Return the Programming Guide to a permanent, safe location when you re finished working with it. We recommend hanging it on the hook inside the controller cabinet door as shown below. OTE: When printing this document, be sure to select Actual size and Landscape orientation in the print dialog box.

3 How To Use The Programming Guide Program and Decoder Information A B Print pages of the Programming Guide. Align the Program Information charts (pages 12 and 13) to the corresponding data on the Decoder Information charts (pages 14-33). PAGE 12 PAGE 13 PAGES 14, 16, 18, 20, 22, 24, 26, 28, 30, 32 PAGES 15, 17, 19, 21, 23, 25, 27, 29, 31, 33 ESP-LXD Controller 1

4 Apply Decoder Address Labels Before you begin programming, apply your field decoder barcode labels to the appropriate fields on the Programming Guide. A 1 Carefully peel the station, master valve, flow or weather sensor sensor decoder barcode label off of the decoder. OTE: An optional Programming Backup Cartridge (PBC) is available for the ESP-LXD controller, which allows you to create and Restore multiple Backups of irrigation programs. With a PBC cartridge installed, you can also set up Field Decoder addresses by using a barcode scanning pen to read the removable barcode labels attached to Rain Bird s field decoders. See Section E of the ESP-LXD Controller Installation, Programming and Operation Guide for more details. Or see page 6 of this Programming Guide for more details on setting up a barcode scanning pen. Fill Out Programming Guide Before you begin programming, fill out the Programming Guide. Sample Programming information is shown on the following pages. C Enter information about your system hardware and settings in the appropriate fields on the Programming Guide. B Apply the decoder address labels in the appropriate fields on the Programming Guide. 3 2 Repeat this process to apply additional barcode labels to the programming chart. 2 ESP-LXD Controller

5 Sample Program Information A B C D E F Enter custom Program ames for your programs in these fields. Enter Days To Water for each program: For Custom cycle, check the specific days of the week to include for irrigation. For Cyclical schedule, enter the cycle period. For example, a 3 DayCycle indicates irrigation will occur every third day. For Odd/Even day watering, check Odd, Even, or Odd 31. Enter Watering Start Time(s). You may enter up to eight start times for each program, but only one start time is needed for a program to run. Circle either am or pm. Enter the Seasonal Adjust by Month percentages (if you are using them). Check O in the Monthly Seasonal Adjust row for each program that will use the monthly percentages. Enter the Seasonal Adjust by Program percentage (if you are using it). The Seasonal Adjust for sample Program A is set to 80%, and the Monthly Seasonal Adjust box is left unchecked. G Enter the Delay for each program (if desired). In the sample, Program A has a one-minute delay between valves. When valve 1 ends, the controller waits one minute before starting valve 2. There will also be a one-minute delay between valve 2 and valve 3, etc. A station delay setting applies to all programs Turf H I 1 2 X X X Enter the Maximum umber of Simuls allowed per program. In the sample, Program A is allowed to run a maximum number of 4 programs simultaneously. Enter the Water Window Start and End Time(s) for each program (if you re using them). Circle either am or pm. Shrub 10:00 11:45 1:00 2:15 4: min 4 3 X X 5:30 X X X :00 6:00 ESP-LXD Controller 3

6 Sample Program Information Enter the Maximum Flow Rate. R List of Rain Bird decoder models. A Apply Master Valve (MV) Decoder Address Labels in these fields. O Enter Days of the Week for the water window to be active. S Enter the Maximum Flow Rate for each Flow Zone in these fields. B C D Enter Description of the MV. Check if the MV is normally open (O) or normally closed (C). Check if the MV is allowed to open during the MV Manual Water Window. P Q Check Pipe Size Units of measurement that you re using; inches or metric. Enter the Flow Units that you re using; GPM or other. T U V List of Rain Bird valve types. Enter the System Valve Types that your system uses. List of Rain Bird flow sensors. E Apply Flow Decoder Address Labels in these fields. n o m p q r F G H I J K L M Enter Description of the flow sensor. Enter the Type of flow sensor. Specifies which Master Valve (MV) the sensor is connected to. Apply Weather Decoder Address Labels in these fields. Enter Description of the weather sensor. Enter the Type of weather sensor. Check which Action the sensor performs (prevent or pause). Enter the Master Valve (MV) Manual Water Window Open and Close Time(s). Circle either am or pm. a b c d e f g h i j k l 7:00 4: X X X X Pump Meter Pump Meter WR2-RC WR2-RFC X X FS400P FS200P Rain Freeze X X X X s t u v 4 ESP-LXD Controller

7 Sample Decoder Information A Apply Decoder Address labels in these fields. B C Enter description of the Valve Type. Enter Description of the decoder model. a b c d e f g h D E Check which Master Valve (MV) the station uses. Enter the Flow Rate. V1 V2 FD101 FD102 X X X X X X X X F Check if the station obeys a Local. G Check if the station obeys a Weather. H Check the FloZone source. I J Enter description of the. Check the station s Priority here. i j k l m K L Enter the Cycle Time (if you re using Cycle+Soak TM ). Enter the Soak Time (if you re using Cycle+Soak TM ). Entry-Sprays Entry-Color Beds X X 5 min 30 min 10 min 5 min M Enter Run Time(s) for each program (A, B, C and D). ESP-LXD Controller 5

8 Barcode Scanning Barcode Scanning Pen Options To take full advantage of ESP-LXD Controller features, an optional barcode scanning pen is recommended for Decoder setup. Rain Bird recommends using a Unitech MS100-RCB00-SG Handheld Pen/Wand Scanner. OTE: The Barcode Scanning Pen must be set up in order to use it with the ESP-LXD Controller and ESP-LXD decoders. See pages 7-8 for Barcode Scanning Pen setup. MS100-RCB00-SG Unitech also offers an earlier version of their barcode scanning pen, the MS Either of these barcode scanning pens will work with the ESP-LXD Controller, once setup properly. For more information on these products or to purchase a barcode scanning pen, visit the Unitech website: orth America Latin America Europe ESP-LXD Controller

9 Barcode Scanning Pen Setup Unitech MS100-RCB00-SG Follow the instructions by scanning the 4 Setup Barcodes that are shown below. A Scan the first barcode lengthwise as shown. You ll hear audible beeps to confirm that the scan was successful. OTE: If you do not hear beeps after each scan then repeat the scanning process until you hear the beeps. Setup Barcode 1 Setup Barcode 2 B Scan the second barcode and again you ll hear audible beeps. Setup Barcode 3 Setup Barcode 4 Scan the remaining barcodes. Be sure to listen for the beeps after each scan to confirm the scan was successful. The barcode scanning pen is now ready for use. ESP-LXD Controller 7

10 Unitech MS100-2 Follow the instructions by scanning the 2 Setup Barcodes that are shown below. A Scan the first barcode lengthwise as shown. You ll hear audible beeps to confirm that the scan was successful. OTE: If you do not hear beeps after each scan then repeat the scanning process until you hear the beeps. Setup Barcode 1 Setup Barcode 2 B Scan the second barcode and again you ll hear audible beeps. The barcode scanning pen is now ready for use. 8 ESP-LXD Controller

11 Test Barcode Scanning Pen Turn the controller dial to ETM/IQ/PBC Settings. C D Scan any station umber Barcode (as shown on pages of the Programming Guide). You ll hear an audible beep to confirm when the scan was successful. The Success! screen will appear and the station field will display the station number of the scanned barcode. 3 4 A B The PBC Main Menu appears. Press the Down Arrow button to select Test Barcode Pen; then press ext. The PBC Test Barcode Pen screen appears with instructions. OTE: Return the Programming Guide to a permanent, safe location when you re finished working with it. We recommend hanging it on the hook inside the controller cabinet door. 1 2 ESP-LXD Controller 9

12 Scan Field Decoder Addresses Set up field decoders automatically by scanning. A CAUTIO: Barcode scanning replaces any previous decoder addresses stored in the controller. Be sure to complete the previous Test Barcode Scanning Pen process before starting as the test process will not update or replace your decoder addresses. Ensure that the station Decoder Address Labels are affixed in the proper locations on the Programming Guide. B C The PBC Main Menu appears. Press the Down Arrow button to select station Setup; then press ext. The PBC station Setup (Scan When Ready) screen appears. 2 3 D On the Programming Guide, scan a station umber barcode and corresponding station Decoder Address Label in sequence. You ll hear audible beep(s) to confirm when scans are successful. 1 Turn the controller dial to ETM/IQ/PBC Settings ESP-LXD Controller

13 E The Successful Scan screen appears and the station and Decoder fields will be updated with the scanned barcode data (the screen will always display the most recently scanned data). Press the Save button to store the scanned station umber and station Decoder Address in the controller. Or else press Cancel to go back or retry scanning again. OTE: It s not necessary to scan Field Decoder addresses sequentially., or MV addresses can be scanned in any numeric order. For example, you could scan station 2 before scanning station 1, if necessary. F To scan master valve, flow sensor or weather sensor decoders; from the Scan When Ready screen, press the Type button to select the desired device. Then repeat the scanning process as previously described. 5 6 OTE: If either barcode does not scan on the first attempt, try scanning one or both barcodes again until you hear the beep(s) and until the screen has updated to show both the station (or or MV) umber and the Decoder Address. If scanning problems persist, you can still enter decoder addresses manually. See ESP-LXD Controller Installation, Programming & Operation Guide, Section B, Setup Wizards for more details. Repeat this process and continue to scan and set up additional Field Decoder addresses as desired. OTE: Even if you don t plan to use a barcode scanning pen, we recommend carefully removing the peel-off barcodes from your field decoders and affixing them to the proper positions in the Programming Guide. ESP-LXD Controller 11

14 Programming Program Information Monthly Seasonal Adjust % JA % FEB % MAR % APR % MAY % JU % JUL % AUG % SEP % OCT % OV % DEC % Default Values for Monthly Seasonal Adjust = 100% Program Info Program A Program B Program C Program D Program ame Select Days To Water (Mon-Sun) For Custom - OR - Select Days Watering Allowed For on-custom Set Watering Start Times M T WT F S S Day Cycle Even Odd Odd 31 M T WT F S S Day Cycle Even Odd Odd 31 M T WT F S S Day Cycle Even Odd Odd 31 M T WT F S S Day Cycle Even Odd Odd 31 1 am / pm am / pm am / pm am / pm 2 am / pm am / pm am / pm am / pm 3 am / pm am / pm am / pm am / pm 4 am / pm am / pm am / pm am / pm 5 am / pm am / pm am / pm am / pm 6 am / pm am / pm am / pm am / pm 7 am / pm am / pm am / pm am / pm 8 am / pm am / pm am / pm am / pm Seasonal Adjust % % % % Monthly Seasonal Adjust O O O O Delay Maximum Simuls Per Program Program Water Window Start Time Program Water Window End Time am / pm am / pm am / pm am / pm am / pm am / pm am / pm am / pm 12 ESP-LXD Controller

15 MV Manual Water Window Window Open Time Window Closed Time Max. Flow Rate am / pm am / pm Active Days Per Week MTWT F S S Pipe Size Units Inch MM Flow Units GPM LPS LPM M3/HR Decoder Models FD101 1 Address FD102 1 Address 1 Valve Per Address 2 Valves Per Address FD202 2 Addresses 2 Valves Per Address FD401 4 Addresses 1 Valve Per Address FD601 6 Addresses 1 Valve Per Address MV umber Flow umber MV F-SE Master Valve Decoder Address Label Flow Decoder Address Label Description Description MV Valve Type ormally Open / Closed /O /C /O /C /O /C /O /C /O /C Type Open In Water Window YES YES YES YES YES Uses MV FloZone Max. Flow Rate Default System Valve Types FZ-1 FZ-2 FZ-3 FZ-4 FZ-5 Type/ Solenoids Default Rain Bird Valve Types V1 1 PGA, PEB, PESB, V2 2 GB, EFB-CP V3 1 BPEB, BPES, V4 2 Golf VIH Rotors V5 1 Pump Start Relay System Valve Type Valve Type V1 V2 V3 V4 V5 Valves Per Address Weather umber W-SE Weather Decoder Address Label Description Type Action Type FS100B Description 1 Brass Tee Local Prevent Prevent Pause Prevent Pause Prevent Pause Flow s FS150P FS200P FS300P FS400P FS350 Custom 1 1/2 PVC Tee 2 PVC Tee 3 PVC Tee 4 PVC Tee Insert User Defined ESP-LXD Controller 13

16 Decoder Information umber 1 Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source ESP-LXD Controller

17 1 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 15

18 umber 21 Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source ESP-LXD Controller

19 21 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 17

20 umber 41 Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source ESP-LXD Controller

21 41 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 19

22 umber 61 Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source ESP-LXD Controller

23 61 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 21

24 umber Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source 22 ESP-LXD Controller

25 81 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 23

26 umber Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source 24 ESP-LXD Controller

27 101 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 25

28 umber 121 Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source ESP-LXD Controller

29 121 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 27

30 umber Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source 28 ESP-LXD Controller

31 141 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 29

32 umber 161 Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source ESP-LXD Controller

33 161 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 31

34 umber Decoder Address Label Valve Type Decoder Model Uses MV Flow Rate Local Weather FloZone Source 32 ESP-LXD Controller

35 181 Description Priority = on Irrigation Cycle Time Soak Time Program A Run Time Program B Run Time Program C Run Time Program D Run Time ESP-LXD Controller 33

36 RAI BIRD CORPORATIO 6991 E. Southpoint Road Tucson, AZ Rain Bird Corporation Rain Bird, Simuls, FloManager, FloWatch and FloZone are registered trademarks of Rain Bird Corporation. All rights reserved. Unitech, MS100-RCB00-SG and MS100-2 are trademarks of Unitech Electronics Co., LTD. 28SE15 - D Revision B