REF620_NAFCCAC3FFxxxAx1xx SINGLE LINE DIAGRAM (TYPICAL) 1MAC DR. Bus 1 (Open Delta) (2)
|
|
- Miranda Russell
- 5 years ago
- Views:
Transcription
1 SHEET 1 OF 10 Bus 1 (Open Delta) REF620_NFCCC3FFxxxx1xx Y or (1) REF620 V2.0 NSI Functional pplication C(C) 50BF-1_TRBU BREKER FIL (3I, CT) REF620 V2.0 NSI Functional pplication C(C) (3U, VT) 2 or 3 SO1 46-1_TRIP 46-2_TRIP 46PD_TRIP 49F_TRIP 50P-1_TRIP 50P-2_TRIP 50P-3_TRIP 50N-1_TRIP 50N-2_TRIP 50N-3_TRIP 50G-1_TRIP 50G-2_TRIP 50G-3_TRIP 51LT_TRIP 51P-1_TRIP 51N-1_TRIP 51G_TRIP FD-1_TRIP 67_50P-1_TRIP 67_50P-2_TRIP 67_51P_TRIP 67_50N-1_TRIP 67_50N-2_TRIP 67-51N_TRIP 81LSH-1_TRIP 81LSH-2_TRIP Breaker Trip(1) 52-1_EXE_CL 79-1_CLOSE_CB 52-1_EXE_OP 86/94-1_TRIP OR OR 86/94-1_TRIP CB1_POSITION_CLOSE CB1_POSITION_OPEN PO1 PO3 HSO1 INPUT 4 INPUT 5 CLOSE TRIP STTUS 52-1 (3UC, VT) CT SUMMTION PT BF-1 59N- 1(1)³ 27-1(1) PD-1 49F-1 Load Prof. 27-2(1) 47-1(1) 47-2(1) 59-1(1) 59-2(1) PQ LSH- 1 81LSH (1) P-1 50P-2 50P-3 51LT-1 51P-1 21P-1 32P-1 67/50P- 1 67/50P- 2 67/51P- 1 Neg Seq Volt Calc Vo FD-3_TRIP 50BF-2_TRBU HSO3 BREKER FIL RC FLSH TRIP(3) Calculated Ground Functions Calc Io 50N-1 50N-2 50N-3 51N-1 32N-1 67/50 N-1 67/50 N-2 67/51 N PB13 (KEY_13) 46-1_TRIP 46-2_TRIP 46PD_TRIP 49F_TRIP 50P-1_TRIP 50P-2_TRIP 50P-3_TRIP 50N-1_TRIP 50N-2_TRIP 50N-3_TRIP 50G-1_TRIP 50G-2_TRIP 50G-3_TRIP 51LT_TRIP 51P-1_TRIP 51N-1_TRIP 51G_TRIP FD-2_TRIP 67_50P-1_TRIP 67_50P-2_TRIP 67_51P_TRIP 67_50N-1_TRIP 67_50N-2_TRIP 67-51N_TRIP 81LSH-1_TRIP 81LSH-2_TRIP Breaker Trip(2) 52-2_EXE_CL 79-2_CLOSE_CB 52-2_EXE_OP 86/94-2_TRIP OR OR 86/94-2_TRIP CB2_POSITION_CLOSE CB2_POSITION_OPEN SO2 PO2 PO4 HSO2 INPUT 2 CLOSE TRIP STTUS 52-2 (Io, CT) 2 50BF-2 59N- 1(2)³ 50G-1 50G-2 FD-1 FD-2 FD-3 50G-3 51G (2) 1 IG/I0 signal Sel Setting Meas Io 32N-1 67/50 N-1 67/50 N-2 67/51 N (2) 47-1(2) 47-2(2) 59-1(2) 59-2(2) 60-1(2) PB14 (KEY_14) 4 INPUT 3 (3IB, CT) (3UB, VT) 2 or 3 Y or (Open Delta) (2) SINGLE LINE DIGRM (TYPICL) RELY ORDER CODE: NFCCC3FFxxxx1xx Bus 2 General Notes: 1. Latched pushbutton switch emulates drop down menu for "IG/I0 signal Sel" parameter in PCM600. Switch position shown for recommended setting (Meas Io). Switch is typical for all connected functions. Position can be set individually for each function. 2. Rotary switch emulates drop down menu for "Pol Signal Sel" parameter setting in PCM600. Switch position shown for default setting (Calculated Vo). 3. "Pol Signal Sel" parameter setting Calc Vo, and 59N-1 functions not applicable for open delta connected VTs. 4. Default labels for programmable pushbuttons 13 and 14. Pushbuttons are shown latched and toggle to emulate flip-flop bus selection logic in PCM600 CT (pplication Configuration Tool). Relay defaults to Bus 1 selection when energized. UTOCD 2014 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
2 SHEET 2 OF 10 REF620_NFCCC3FFxxxx1xx General Notes: 1. Style and code numbers for FT-1 switches provide black covers and handles, screw terminals and standard depth. Poles selection follows arrangement shown in this drawing set. For custom designs, different selection options can be made by using FT-1 configurator at ft1switch.com 2. Refer to 620 series NSI Installation Manual for relay and cutout dimensions ( Document ID: 1MC iB, Revision:, Product version 2.0) FRONT PNEL ELEVTION RELY ORDER CODE: NFCCC3FFxxxx1xx UTOCD 2014 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
3 SHEET 3 OF 10 REF620_NFCCC3FFxxxx1xx PHSE CURRENT I(1) PHSE CURRENT IB(1) PHSE CURRENT IC(1) GROUND CURRENT IG RELY POS. VDC RELY NEG. VDC PHSE CURRENT V(1) PHSE CURRENT VB(1) PHSE CURRENT VC(1) 52-1_EXE_CL/79-1_CLOSE_CB_(PO1) 86_94-1_TRIP/52-1_EXE_OP(PO3) 50BF-1_TRBU(SO1) 86_94-1_TRIP(HSO1) CB1_POSITION_CLOSE(IN4) CB1_POSITION_OPEN(IN5) B C D E F G H I J B C D E F G H I J (CT (1) CURRENTS ND POWER SUPPLY) (BUS 1 POTENTILS ND CB 52-1 BINRY I/O) PHSE CURRENT I(2) PHSE CURRENT IB(2) PHSE CURRENT IC(2) FD-3_TRIP(HSO3) SYNCH VOLTGE VS PHSE CURRENT V(2) PHSE CURRENT VB(2) PHSE CURRENT VC(2) 52-2_EXE_CL/79-2_CLOSE_CB_(PO2) 86_94-2_TRIP/52-2_EXE_OP(PO4) 50BF-2_TRBU(SO2) 86_94-2_TRIP(HSO2) CB2_POSITION_CLOSE(IN2) CB2_POSITION_OPEN(IN3) B C D E F G H I J B C D E F G H I J (CT (2) CURRENTS ND LINE POTENTIL) (BUS 2 POTENTILS ND CB 52-2 BINRY I/O) FT-1 SWITCH RRNGEMENT RELY ORDER CODE: NFCCC3FFE1BN1XF UTOCD 2014 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
4 SHEET 4 OF 10 REF620_NFCCC3FFxxxx1xx Bus 1 Open Delta * FT-1/TS2 REF620 X130 FT-1/TS1 X Summation Point WYE VT CONNECTION 'VT connection' setting = 'Wye') * For relay voltage connections shown set nalog input Voltage 'VT connection' setting to Wye' for metering to work correctly. Refer to application manual for alternate connections to relay for open delta connections using 'Delta' VT connection setting. C SCHEMTIC - BUS 1, CB-52-1 (TYPICL) NFCCC3FFxxxx1xx RELY ORDER CODE: UTOCD 2014 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
5 SHEET 5 OF 10 REF620_NFCCC3FFxxxx1xx Circuit Breaker 52-1 FT-1/TS3 REF620 X FT-1/TS1 X120 Feeder Bus 2 C SCHEMTIC - FEEDER, CB52-2 (TYPICL) NFCCC3FFxxxNx1xx RELY ORDER CODE: UTOCD 2014 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
6 SHEET 6 OF 10 REF620_NFCCC3FFxxxx1xx Circuit Breaker 52-2 WYE VT CONNECTION 'VT connection' setting = 'Wye') FT-1/TS3 REF620 X120 FT-1/TS4 X130 Open Delta * Bus 2 C SCHEMTIC - BUS 2 (TYPICL) NFCCC3FFxxxx1xx RELY ORDER CODE: UTOCD 2014 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
7 SHEET 7 OF 10 RELY POS. VDC BREKER 52-1 POS. VDC BREKER 52-2 POS. VDC DC SCHEMTIC: INPUTS 50BF-1_TRIP POS(+VDC) 50BF-2_TRIP POS(+VDC) FD-3_TRIP POS(+VDC) X _EXE_CL 79-1_CLOSE_CB 52-2_EXE_CL 79-2_CLOSE_CB SO1 50BF-1_TRBU SO2 50BF-2_TRBU 86_94-1_TRIP 52-1_EXE_OP 86_94-2_TRIP 52-2_EXE_OP 86/94-1_TRIP 86/94-2_TRIP FD_TRIP FT-1/TS4 FT-1/TS2 FT-1/TS4 FT-1/TS3 50BF-1_TRIP CKT 50BF-2_TRIP CKT FD-3_TRIP CKT CLOSE CIRCUIT CLOSE CIRCUIT TRIP CIRCUIT TRIP CIRCUIT RELY NEG. VDC BREKER 52-1 NEG. VDC DC SCHEMTIC: INPUTS BREKER 52-2 NEG.VDC DC SCHEMTIC- OUTPUTS, PS (TYPICL) NFCCC3FFxxxx1xx RELY ORDER CODE: UTOCD 2014 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
8 SHEET 8 OF 10 REF620_NFCCC3FFxxxx1xx RELY POS. VDC DC SCHEMTIC: POWER SUPPLY ND OUTPUTS BREKER 52-1 POS. VDC BREKER 52-2 POS. VDC BI2 CB2_POSITION _CLOSE DC SCHEMTIC: POWER SUPPLY ND OUTPUTS RELY NEG. VDC BREKER 52-1 NEG. VDC BREKER 52-2 NEG. VDC DC SCHEMTIC-INPUTS (TYPICL) RELY ORDER CODE: NFCCC3FFxxxx1xx UTOCD 2014 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
9 SHEET 9 OF 10 REF620_NFCCC3FFxxxx1xx CONNECTION DIGRM-RELY RELY ORDER CODE: NFCCC3FFxxxx1xx UTOCD 2011 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
10 SHEET 10 OF 10 REF620_NFCCC3FFxxxx1xx CONNECTION DIGRM-FT-1 SWITCHES RELY ORDER CODE: NFCCC3FFxxxx1xx UTOCD 2014 Copyright 2015 BB ll rights reserved BB Protective Relays and Switches, Coral Springs Fl, U.S.. 1MC DR
Breaker-and-a-half Automatic reclosing and leader follower.
Breaker-and-a-half Automatic reclosing and leader follower www.siemens.com/siprotec SIPROTEC 5 Application Breaker-and-a-half Automatic reclosing and leader follower APN-018, Edition 1 Content 1... 3 1.1
More informationSIPROTEC 5 Application Note
www.siemens.com/protection SIPROTEC 5 Application Note SIP5-APN-018: Answers for infrastructure and cities. SIPROTEC 5 - Application: SIP5-APN-018 Breaker-and-a-half Automatic reclosing and leader follower
More informationEC456 Power System Protection Lab #1 Overcurrent Protection Relay
EC456 Power System Protection Lab #1 Overcurrent Protection Relay Learning Objectives: Understand the building blocks of a numerical protection relay Understand the HMI of the relay. Establish communication
More informationContactors and Contactor Assemblies
Terminal designations according to EN 50 012 3RT10 1 contactors Ident. no. 10E 01 Sizes S0 to S12 Terminal designations according to EN 50 012 3RT10 2 to 3RT10 7, 3RT12, 3RT14 contactors 3RT10 1 contactors
More informationType MG-6 Auxiliary Relay Class 1E
Type MG-6 Auxiliary Relay Class 1E Product Guide Device Number: 94X, Y, Z ZPA Rating 4.2g ABB Application MG-6 relays have been specially designed and tested to establish their suitability for Class 1E
More informationand Refrigeration Institute). CAQ7 Capacitor Switching Contactors
SSN9000 Series C7 Special Use designed and labeled for specific industrial applications Special Use Capacitor switching contactors HVC rated contactors NEM size labeled contactors Lighting contactors Hydraulic
More informationBE3-GPR GENERATOR PROTECTIVE RELAY
BE3-GPR GENERATOR PROTECTIVE RELAY Behind-the-Panel Mounting Semi-flush Mounting Basler Electric s BE3-GPR generator protective relay offers multiple protective features in a single package. Its microprocessor-based
More informationSECU-16. Specifications Power: Input Voltage 9-12V DC or AC Input Current Max 200mA. 8 2-wire inputs, Analog (0 5VDC) or Supervised
SECU-16 Introduction The SECU-16 module allows 8 inputs and 8 low-current relay outputs to be added to an ADICON control system. The inputs may be supervised (switch closure), analog, or 4-20mA. Specifications
More informationand Refrigeration Institute). Hydraulic Elevator Wye-Delta Contactors
C7 Series C7 Special Use designed and labeled for specific industrial applications The C7 line includes a number of contactors designed and labeled for specific industrial applications. In most cases,
More informationFor reference, here is a shop drawing of how feed through lugs is shown by a manufacturer:
Minimum Needed I would need the ability in revit to treat three panel families as one three section panelboard, more specifically: Add a parameter or row in the panel schedule for feed through lugs (FTL)
More informationPanel cutout required: 1.772" x 3.622" (45mm x 92mm) 1.76" (45mm) 2.45" (62mm) 3.20" (81mm) 3.60" (91mm) 0.59" (15mm) Special Features
NEMA4X, IP65 Front Bezel Meter with Relays Option RELAY2 RELAY1 24V OUT POWER 4 3 2 1 6 5 2 1 2 1 NO NC COM NO NC COM RTD TC P P RTD 3 4 1 2 5 TC 6 SWITCH Rear View Gasket APM765 Panel Meter Description
More informationExercise 2: Connecting the Digital Logic Circuits
Exercise 2: Connecting the Digital Logic Circuits EXERCISE OBJECTIVE When you have completed this exercise, you will be able to connect digital logic circuits and observe the inputs and outputs by using
More informationED3. Digital Encoder Display Page 1 of 13. Description. Mechanical Drawing. Features
Description Page 1 of 13 The ED3 is an LCD readout that serves as a position indicator or tachometer. The ED3 can display: Speed or position of a quadrature output incremental encoder Absolute position
More informationMODEL: 40DPT. Digital Panel Meters 40 Series. [3] OPTIONS blank: none /Q: With options (specify the specification)
Digital Panel Meters 40 Series C VOLTGE INPUT DIGITL PNEL METER (4 digit, process meter, true RMS sensing) Functions & Features 4 digit (±9999) panel meter Scaling and functions High visible, 0.8" (20.3mm)
More informationIEFIS G3 Inputs, outputs and Alarms
IEFIS G3 Inputs, outputs and Alarms Document version: 2, May 2016 User manual on the use and configuration of the analog and digital inputs and digital outputs as well as Alarm setup and use. Related equipement:
More informationSlide 1. Flip-Flops. Cross-NOR SR flip-flop S R Q Q. hold reset set not used. Cross-NAND SR flip-flop S R Q Q. not used reset set hold 1 Q.
Slide Flip-Flops Cross-NOR SR flip-flop Reset Set Cross-NAND SR flip-flop Reset Set S R reset set not used S R not used reset set 6.7 Digital ogic Slide 2 Clocked evel-triggered NAND SR Flip-Flop S R SR
More informationINCH-POUND MIL-PRF-55629/21G 10 March 2010 SUPERSEDING MIL-PRF-55629/21F 21 September 2005 PERFORMANCE SPECIFICATION SHEET
PERFORMANCE SPECIFICATION SHEET INCH-POUND 0 March 200 SUPERSEDING MIL-PRF-629/2F 2 September 200 CIRCUIT BREAKERS, MAGNETIC, PANEL SEAL, TRIP-FREE, SERIES TRIP, DOUBLE POLE (0.2 TO 0 AMPERES) This specification
More informationPQ-Box 100 Quick Start Instructions
PQ-Box 100 Quick Start Instructions These instructions are provided for the purpose on providing a quick start to PQ-Box 100 installation and operation. Please refer to the user handbook for full details.
More informationBE1-81O/U Frequency Protection. Washington State University Hands-On Relay School.
Frequency Protection Washington State University Hands-On Relay School www.basler.com Relay Benefits As many as four independent, adjustable frequency setpoints and time delays Each setpoint has output
More informationSelection guide siemens.com/sirius-modular-system
SIRIUS modular system Selection guide siemens.com/sirius-modular-system Everything for the control cabinet: SIRIUS modular system Efficiently combined Advantages at a glance: Load feeders: easy to implement
More informationUser Manual CC DC 24 V 5A. Universal Control Unit UC-1-E. General Information SET. Universal Control Unit UC-1 Of Central Lubrication PAUSE CONTACT
Universal Control Unit UC-1-E User Manual General Information Universal Control Unit UC-1 Of Central Lubrication CC DC 24 V 5A / M 15 SL /MK 31 M Z 30 General Information Contents Universal Control Unit
More information2 CHANNEL RECEIVER DISPLAY POTENTIOMETER COM2 NC2 NO2
2 CHANNEL RECEIVER RECTSHIVE915-DX Please read this manual carefully before installing the product. 1 DESCRIPTION Receiver Rolling Code, 2 channels with dry contact relay output 20A a 12 Vdc. Programming
More informationUNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load Cell
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com UNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load
More informationNORTHWESTERN UNIVERSITY TECHNOLOGICAL INSTITUTE
NORTHWESTERN UNIVERSITY TECHNOLOGICL INSTITUTE ECE 270 Experiment #8 DIGITL CIRCUITS Prelab 1. Draw the truth table for the S-R Flip-Flop as shown in the textbook. Draw the truth table for Figure 7. 2.
More informationProgramming Guide and User Manual INS # Model # CKM. ControlKeeper M
Programming Guide and User Manual Model # CKM INS # Contents Contents Description Contents....2 Safety Instructions....3 Introduction....4 Welcome....4 Terminology used in this guide....5 ControlKeeper
More informationNE-18 Series Mains / Power Switches
Features/Benefits Chassis or panel mount Various buttons Various contact configurations RoHS compliant Typical pplications Mains/power switching Consumer electronics udio equipment Digital products UL61058-1
More informationUSER S GUIDE. 1 Description PROGRAMMABLE 3-RELAY LOGIC MODULE
1 Description The is a programmable 3 relay logic module that may be used for multiple applications, including simple timing, door mounted sensor inhibiting and advanced relay sequencing. The contains
More informationTDEPD. Field-Programmable Pressure Switch/Transducer with Integrated LED Display. Programming Sequence Manual
TDEPD Field-Programmable Pressure Switch/Transducer with Integrated LED Display Programming Sequence Manual Wiring Diagram Pin5 Maintenance Mode + Gray Vent Pin2 Digital Output 2 +/ Analog Output + White
More informationR1MS-GH3 BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL THERMOCOUPLE & DC INPUT MODULE MODEL. (8 points; isolated)
INSTRUCTION MANUAL THERMOCOUPLE & INPUT MODULE (8 points; isolated) MODEL BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below.
More informationOperating Instructions for Throttle Valves Using VRC Valve Positioner
ThrottleMaster TM Operating Instructions for Throttle Valves Using VRC Valve Positioner p/n: X709116 $10.00 3/2012 Throttlemaster is a registered trademark of Vacuum Research Corporation Introduction The
More informationDATA SHEET. Synchronisers, FAS-113DG ANSI code 25
DATA SHEET Synchronisers, ANSI code 25 Synchronisation of generator to busbar Circuit breaker time compensation LED indication of status LED for activated control LED for synchronising signal 35 mm DIN
More informationAurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1
Aurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1 Contents 1) Grid-Tie Installation Block Diagram... 3 2) Installation Steps.... 4 2.1) Initial Setup.... 4 2.1.1)
More informationProvides an activation of Relay 1 triggered by Input 1. The function also provides an option for reverse-logic on the activation of Input 1.
USER S GUIDE PROGRAMMABLE 3-RELAY LOGIC MODULE 1 Description The is a programmable 3 relay logic module that may be used for multiple applications, including simple timing, door mounted sensor inhibiting
More informationOperating Instructions (ed. 5.97) Electronic Preset Counter Type Series 904
Operating Instructions 3.96.3 (ed. 5.97) Electronic Preset Counter Type Series 904 1. Description 6 digit preset counter, 2 presets, add./subtr. bright 2-line LCD display with symbols for activated outputs
More informationMultifunction Digital Timer
Multifunction Digital Timer 72 x72 mm Timer with Easy-to-use Functions Nine output modes accommodate a wide variety of applications. All parameters set by scroll-through menus accessed from the front panel.
More informationIntertie Protection M 3520
PROTECTION Intertie Protection M 3520 Integrated Protection System Unit shown with optional HMI and Target modules Integrated Protection System for DR/DG Intertie, Providing: Loss of parallel utility operation
More informationSITE All work shall be performed at Center Park Substation (1895 Kernan Blvd, Jacksonville, Fl ). DATE: 04/03/2018
DATE: 04/03/2018 TO: The Contractor FROM: System Protection & Control Projects 20413 SUBJECT: Technical Specifications for Center Park APSTF Project PROJECT OVERVIEW This is a general specification that
More informationX-Band Redundant LNB Systems
X-Band Redundant LNB Systems BRX-1000 Series Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic means of switching to the spare upon
More informationTeSys circuit-breakers
Thermal-magnetic motor circuit-breakers type GV2-ME GV2-ME with pushbutton control and screw clamp terminals (1) Standard power ratings Setting Magnetic Reference Weight of -phase motors range tripping
More informationDIN-1DIMU4. DIN Rail Universal Dimmer, 1 feed, 4 channels
The is a 4-channel universal lighting control module designed to support dimming of both forward and reverse phase type loads. A single model supports both 120 and 220-240 Volt electronic and magnetic
More informationHS-509 VIBRATION TRIP MODULE
HS-509 VIBRATION TRIP MODULE 1. Overview The HS-509 is a configurable trip amplifier capable of accepting a 4-20mA signal from a HS-420 sensor and providing two trip action relay outputs along with an
More informationEE 109 Homework 6 State Machine Design Name: Score:
EE 9 Homework 6 State Machine esign Name: Score: ue: See Blackboard Blackboard ONLY Submission. While the Blackboard submission may not require you to go through all the design steps (such as drawing out
More informationINSTRUCTION MANUAL AUTORECLOSING RELAY GRR100 - B
INSTRUCTION MANUAL AUTORECLOSING RELAY GRR1 - B Toshiba Energy Systems Solutions Corporation 217 All Rights Reserved. ( Ver. 1.1) Safety Precautions Before using this product, please read this chapter
More informationToronto Hydro - Electric System
Toronto Hydro - Electric System FIT Commissioning Requirements and Reports Comments and inquiries can be e-mailed to: FIT@torontohydro.com Customers without e-mail access can submit through regular mail
More informationSMART SYSTEM DUOX SYSTEM GUIDE
SMART SYSTEM DUOX SYSTEM GUIDE This document shows the basic concepts for a quick start-up. For more information download the manuals at www.fermax.com Technical publication of an informative nature published
More informationNE-18 Series Mains / Power Switches
NE-18 Series Features/Benefits Chassis or panel mount Various buttons Various contact configurations RoHS compliant Typical pplications Mains/power switching Consumer electronics udio equipment Digital
More informationNE-18 Series Mains / Power Switches
Features/Benefits Chassis or panel mount Various buttons Various contact configurations RoHS compliant Typical pplications Mains/power switching Consumer electronics udio equipment Digital products UL61058-1
More informationCOMPANY. MX 9000 Process Monitor. Installation, Operating & Maintenance Manual AW-Lake Company. All rights reserved. Doc ID:MXMAN082416
COMPANY MX 9000 Process Monitor Installation, Operating & Maintenance Manual 2016 AW-Lake Company. All rights reserved. Doc ID:MXMAN082416 1 Table of Contents Unpacking...3 Quick Guide...3 Connect to Sensor...3
More informationRD RACK MOUNT DIMMER OWNERS MANUAL VERSION /09/2011
RD - 122 RACK MOUNT DIMMER OWNERS MANUAL VERSION 1.3 03/09/2011 Page 2 of 14 TABLE OF CONTENTS UNIT DESCRIPTION AND FUNCTIONS 3 POWER REQUIREMENTS 3 INSTALLATION 3 PLACEMENT 3 POWER CONNECTIONS 3 OUTPUT
More informationCMU-212. ITS Cabinet Monitor Unit Operations Manual
CMU-212 ITS Cabinet Monitor Unit THIS MANUAL CONTAINS TECHNICAL INFORMATION FOR THE CMU-212 AND CMUip-212 SERIES ITS CABINET MONITOR UNIT. Firmware Version 2.4 (vxx24) REVISION: OCTOBER 2017 pn 888-0212-001
More informationORM0022 EHPC210 Universal Controller Operation Manual Revision 1. EHPC210 Universal Controller. Operation Manual
ORM0022 EHPC210 Universal Controller Operation Manual Revision 1 EHPC210 Universal Controller Operation Manual Associated Documentation... 4 Electrical Interface... 4 Power Supply... 4 Solenoid Outputs...
More informationBulletin 109 TABLE OF CONTENTS Bulletin 109 IEC Non-Reversing Starters. Enclosed Type Molded Plastic. Description Page Description Page
3a Enclosed Type Molded Plastic Compact Design Impact-Resistant Molded Enclosures IP42 (Type 1) or IP66 (Type4/4X/12)Enclosure Ratings Solid-State Overload Relays Meets International Standards 109-C09KDA1E-1-4R1-7
More informationSAC6840N 2X1 Switcher USER MANUAL
SAC6840N 2X1 Switcher USER MANUAL Product Information Model: SAC6840N 2X1 Switcher Version: V010001 Release Date: June 30th, 2008 Company OSEE TECHNOLOGY CO., LTD. Contact Information Address: No.22 Building,
More informationDelta-Sigma ADC
http://www.allaboutcircuits.com/vol_4/chpt_13/9.html Delta-Sigma ADC One of the more advanced ADC technologies is the so-called delta-sigma, or Σ (using the proper Greek letter notation). In mathematics
More informationOperating instructions Electronic preset counter Type series 717
Operating instructions Electronic preset counter Type series 717 1. Description 5.98.3_gb 6-digit adding/subtracting counter with two presets Very bright 8mm high LED display Counting and preset range
More information82C55A CHMOS PROGRAMMABLE PERIPHERAL INTERFACE
Y Y Y Y Y 82C55A CHMOS PROGRAMMABLE PERIPHERAL INTERFACE Compatible with all Intel and Most Other Microprocessors High Speed Zero Wait State Operation with 8 MHz 8086 88 and 80186 188 24 Programmable I
More informationAPPLICATION NOTE # Monitoring DTMF Digits Transmitted by a Phone
APPLICATION NOTE # Product: 930A Communications Test Set 930i Communications Test Set Monitoring DTMF Digits Transmitted by a Phone Introduction This Application Note describes how to configure and connect
More informationINSTRUCTION MANUAL BREAKER FAILURE RELAY GRC100
INSTRUCTION MANUAL BREAKER FAILURE RELAY GRC100 Toshiba Energy Systems & Solutions Corporation 2017 All Rights Reserved. ( Ver. 1.5) Safety Precautions Before using this product, please read this chapter
More informationFWD8000 Dante enabled four wire box
FWD8000 Dante enabled four wire box by CTP Systems Product warranty This unit is guaranteed for a period of one year from dispatch of the goods. This guarantee is a return to base warranty. In the unlikely
More informationProVu PD6000 Process Meter
Congratulations on your purchase of the ProVu PD6000 process meter! This quick start guide will briefly describe some of the common setup procedures for this meter. This guide includes: Basic Wiring for
More informationOmega.com TM. DPS3100 & DPS3200 series Programmable Scanners
Omega.com TM http://www.omega.com e-mail: info@omega.com DPS3100 & DPS3200 series Programmable Scanners TABLE OF CONTENTS SPECIFICATIONS... 3 DESCRIPTION... 4 DISPLAYING PARAMETERS... 5 Table 1. How to
More informationOWNERS MANUAL. Revision /01/ Lightronics Inc. 509 Central Drive Virginia Beach, VA Tel
OWNERS MANUAL Revision 1.8 09/01/2002 OWNERS MANUAL Page 2 of 12 AR-1202 UNIT DESCRIPTION The AR-1202 consists of a processor and 12 dimmer channels of 2.4KW each. Each dimmer channel is protected by a
More informationChapter 2. Digital Circuits
Chapter 2. Digital Circuits Logic gates Flip-flops FF registers IC registers Data bus Encoders/Decoders Multiplexers Troubleshooting digital circuits Most contents of this chapter were covered in 88-217
More informationTUTORIAL IGBT Loss Calculation in the Thermal Module
TUTORIAL IGBT Loss Calculation in the Thermal Module October 2016 1 In this tutorial, the process of calculating the IGBT power losses using PSIM s Thermal Module is described. As an illustration, Semikon
More informationMANAGING POWER SYSTEM FAULTS. Xianyong Feng, PhD Center for Electromechanics The University of Texas at Austin November 14, 2017
MANAGING POWER SYSTEM FAULTS Xianyong Feng, PhD Center for Electromechanics The University of Texas at Austin November 14, 2017 2 Outline 1. Overview 2. Methodology 3. Case Studies 4. Conclusion 3 Power
More informationLAB #4 SEQUENTIAL LOGIC CIRCUIT
LAB #4 SEQUENTIAL LOGIC CIRCUIT OBJECTIVES 1. To learn how basic sequential logic circuit works 2. To test and investigate the operation of various latch and flip flop circuits INTRODUCTIONS Sequential
More information2. Using LCD Digital Operator
2. Using LCD Digital Operator Functions of LCD digital operator JNEP-31(V) LCD digital operator has 2 modes: mode and mode. When the inverter is stopped, mode or mode can be selected by pressing the. In
More informationC8000. sync interface. External sync auto format sensing : AES, Word Clock, Video Reference
features Standard sync module for a frame Internal sync @ 44.1 / 48 / 88.2 / 96kHz External sync auto format sensing : AES, Word Clock, Video Reference Video Reference : Black Burst (NTSC or PAL) Composite
More informationDigital Lighting Systems, Inc.
, Inc. Series DMX CHASER/CROSS-FADER Controllers MODE RUN RATE MAX. MIN. Lighting Animation Controller FADE AUTO STOP BLK. OUT DIM1 DIM2 DIM3 DIM4 MODEL NUMBERS 2 2C Miami, Fl. USA digitallighting.com
More informationPRINCIPLES AND APPLICATIONS
GENERATION & NETWORK Digital Automation Measuring and Control Devices AMS7000 PROCOM The optimum operation of an electrical network depends particularly on the reliability and the availability of the protection,
More informationLow Voltage Power Panel
GE EntellEon * Low Voltage Power Panel Ratings & Accessories These instructions do not cover all details or variations in equipment, nor do they provide for every possible contingency that may be met in
More informationBurlington County College INSTRUCTION GUIDE. for the. Hewlett Packard. FUNCTION GENERATOR Model #33120A. and. Tektronix
v1.2 Burlington County College INSTRUCTION GUIDE for the Hewlett Packard FUNCTION GENERATOR Model #33120A and Tektronix OSCILLOSCOPE Model #MSO2004B Summer 2014 Pg. 2 Scope-Gen Handout_pgs1-8_v1.2_SU14.doc
More informationUser Guide UD51. Second encoder small option module for Unidrive. Part Number: Issue Number: 5.
EF User Guide UD51 Second encoder small option module for Unidrive Part Number: 0460-0084-05 Issue Number: 5 www.controltechniques.com Safety Information The option card and its associated drive are intended
More informationKu-Band Redundant LNB Systems
Ku-Band Redundant LNB Systems BRK-1000 Series Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic means of switching to the spare upon
More informationC-Band Redundant LNB Systems
C-Band Redundant LNB Systems BRC-1000 Series Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic means of switching to the spare upon
More informationVorne Industries. 87/719 Analog Input Module User's Manual Industrial Drive Itasca, IL (630) Telefax (630)
Vorne Industries 87/719 Analog Input Module User's Manual 1445 Industrial Drive Itasca, IL 60143-1849 (630) 875-3600 Telefax (630) 875-3609 . 3 Chapter 1 Introduction... 1.1 Accessing Wiring Connections
More informationA MISSILE INSTRUMENTATION ENCODER
A MISSILE INSTRUMENTATION ENCODER Item Type text; Proceedings Authors CONN, RAYMOND; BREEDLOVE, PHILLIP Publisher International Foundation for Telemetering Journal International Telemetering Conference
More informationPulseFlow FP100 Pulse to 4 20mA Flow Converter (Flow Rate Transmitter / Totalizer / Indicator)
PulseFlow FP100 Pulse to 4 20mA Flow Converter (Flow Rate Transmitter / Totalizer / Indicator) Submeter Solutions, Inc. PulseFlow FP100 Submeter Solutions, Inc., 800-64METER Page 1 Table of Contents: Installation
More informationMULTIS L72. Operating instructions
GB MULTIS L72 Operating instructions 2 SOCOMEC - Ref. : 876 091B ENGLISH GB Contents PRELIMINARY OPERATIONS 4 GENERAL INFORMATION 5 PRESENTATION 4 INSTALLATION 5 Mechanical environment Climatic environment
More information4-in-1 Motor Controller CAN
4-in-1 Motor Controller CAN Page 1 of 6 Version 1.10 Technical Data Construction Connector Housing Dimensions Weight Ambient Temperature Protection Class Plastic housing with side flaps 2x Tyco JPT 90
More informationMagnecraft General Purpose Relays 750R Series DPDT and 3DPT, 10 A
and 3DPT, 10 A UL Listed when used with proper Magnecraft s The 750R series octal base, plug-in relays offer clear or full-feature covers with multiple mounting options and accessories. 750R 750R Full-Feature
More informationTransient Stability Events & Actions
ETAP TIP No. 009 Transient Stability Events & Actions Applicable ETAP Versions: 5.5.0, 5.5.5, 5.5.6 (For lower versions, some of the descriptions and procedures below may differ in some ways) Event is
More informationMODEL 2018 OPERATION MANUAL Firmware Version
Reno A&E Telephone: (775) 826-2020 4655 Aircenter Circle Facsimile: (775) 826-9191 Reno, Nevada 89502 Internet: www.renoae.com USA e-mail: contact@renoae.com MODEL 2018 OPERATION MANUAL Firmware Version
More informationTABLE OF CONTENTS 1. OVERVIEW INSTALLATION VIDEO CONNECTIONS GENERAL PURPOSE INPUTS & OUTPUTS SPECIFICATIONS...
TABLE OF CONTENTS 1. OVERVIEW...1 2. INSTALLATION...3 2.1. VIDEO CONNECTIONS... 3 2.2. GENERAL PURPOSE INPUTS & OUTPUTS... 4 3. SPECIFICATIONS...6 3.1. SERIAL DIGITAL VIDEO INPUTS... 6 3.2. SERIAL DIGITAL
More informationDigital Fundamentals. Lab 5 Latches & Flip-Flops CETT Name: Date:
Richland College School of Engineering & Technology Rev. 0 B. Donham Rev. 1 (7/2003) J. Horne Rev. 2 (1/2008) J. Bradbury Rev. 3 (7/2015) J. Bradbury Digital Fundamentals CETT 1425 Lab 5 Latches & Flip-Flops
More informationINSTRUCTION GUIDE. for the. Keysight (formally Agilent; Hewlett-Packard) Model #33509B. and. Tektronix. Fall 2017
v3 INSTRUCTION GUIDE for the Keysight (formally Agilent; Hewlett-Packard) WAVEFORM GENERATOR Model #33509B 33500 Series and Tektronix OSCILLOSCOPE Model #MSO2004B Fall 2017 Pg. 2 Scope-Gen Handout_part
More informationFlexiScan. Impro FlexiScan 4-Channel Controller INSTALLATION MANUAL
MODEL NUMBER: HCM991-0-0-GB-XX FlexiScan SPECIFICATIONS Impro FlexiScan 4-Channel Controller INSTALLATION MANUAL Working Environment... Security... Input Voltage... The Impro FlexiScan is designed to work
More informationEE 367 Lab Part 1: Sequential Logic
EE367: Introduction to Microprocessors Section 1.0 EE 367 Lab Part 1: Sequential Logic Contents 1 Preface 1 1.1 Things you need to do before arriving in the Laboratory............... 2 1.2 Summary of material
More informationSingle Axis Position Controller
SERIES P9511 Single Axis Position Controller Compact Construction Simple Go-to operation Integrated Relay Output Integrated Mains Power Supply ELEKTRO-TRADING sp. Z o.o. 44-109 Gliwice, ul. Mechaników
More informationSigma 1 - Axis Servo Motor and Cables - Troubleshooting Guide
LAST UPDATED: 12/21/2018 Introduction Press [POWER OFF]. Set the main circuit breaker to the OFF position. Wait until the high voltage LED on the vector drive is completely off before disconnecting any
More informationUniversity of Victoria. Department of Electrical and Computer Engineering. CENG 290 Digital Design I Lab Manual
University of Victoria Department of Electrical and Computer Engineering CENG 290 Digital Design I Lab Manual INDEX Introduction to the labs Lab1: Digital Instrumentation Lab2: Basic Digital Components
More informationFigure 1: Standard 906 Sensor and Pulser Disc. Figure 2: Standard 906 Sensor and Pulser Wrap
Description: The TR5000 is a Full Logic Control Process ratemeter that can display up to three separate values of rate and compare them to programmable set points. Rates A & B can be programmed by the
More informationSystems Pow-R Breakers Renewal Parts and Accessories
Systems Pow-R Breakers Renewal Parts and Accessories Renewal Parts RP01301013E Effective February 2006 Supersedes RPD29-890A pages 1 16 dated, March 2000 Cutler-Hammer SPB 100, 65 and 50 Series Contents
More informationCHW 261: Logic Design
CHW 26: Logic Design Instructors: Prof. Hala Zayed Dr. Ahmed Shalaby http://www.bu.edu.eg/staff/halazayed4 http://bu.edu.eg/staff/ahmedshalaby4# Slide Digital Fundamentals CHAPTER 7 Latches, Flip-Flops
More informationNATIONAL RADIO ASTRONOMY OBSERVATORY
NATIONAL RADIO ASTRONOMY OBSERVATORY GREEN BANK ) WEST VIRGINIA ELECTRONICS DIVISION INTERNAL REPORT No. 17 DDP-116/MODCOMP DATA LINK AT THE -FT TELESCOPE GEORGE H. PATTON APRIL 17 NUMBER OF COPIES: DDP-116/MODCOMP
More informationMC54/74F568 MC54/74F569 4-BIT BIDIRECTIONAL COUNTERS (WITH 3-STATE OUTPUTS) 4-BIT BIDIRECTIONAL COUNTERS (WITH 3-STATE OUTPUTS)
4-BIT BIDIRECTIONAL COUNTERS (WITH 3-STATE OUTPUTS) The MC54/ 74F568 and MC54/74F569 are fully synchronous, reversible counters with 3-state outputs. The F568 is a BCD decade counter; the F569 is a binary
More informationEXPERIMENT #6 DIGITAL BASICS
EXPERIMENT #6 DIGITL SICS Digital electronics is based on the binary number system. Instead of having signals which can vary continuously as in analog circuits, digital signals are characterized by only
More informationCARLO GAVAZZI Automation Components
CARLO GAVAZZI Automation Components UDM 35/40 Digital Panel Meter Programming Guide Index Description 2 Programming Fundamentals 3 Access to Programming Mode/Password Protection 4 Programming 5-18 Inputs
More informationDMX and 4000 air circuit breakers from 800 to 4000 A
DMX 3 20 and 00 air circuit breakers from 800 to 00 NEW 286 56 + 288 02 (p. 4) 286 4 + 288 02 (p. 4) 28 56 + 288 02 (p. 4) Dimensions (p. to 53) Electrical characteristics (p. 54 to 5) ir circuit breakers
More informationRevision 1.2d
Specifications subject to change without notice 0 of 16 Universal Encoder Checker Universal Encoder Checker...1 Description...2 Components...2 Encoder Checker and Adapter Connections...2 Warning: High
More information