EE201: Transmission Line Protection
|
|
- Arlene Holmes
- 6 years ago
- Views:
Transcription
1 EE201: Transmission Line Protection EE201 Rev.001 CMCT COURSE OUTLINE Page 1 of 5
2 Training Description: Engineers and power system consultants who need a comprehensive understanding of the challenges and solutions for protecting high-voltage power transmission lines is a must attend this course. This intensive training provides an in-depth study of the methods used in designing protection systems for high-voltage power transmission lines. The course provides advanced guidelines for relay application and settings for transmission lines, including series-compensated lines. It also reviews time-domain ultra-highspeed line protection principles. The course covers the application and settings of power swing blocking and out-of-step tripping functions. Training Objective: By the end of the training, participants will be able to: Learn how to correctly configure the D60 and ALPS Distance relays the L90 line current differential and L60 LinePhase Comparison Describe the protection requirements of modern power transmission lines Identify the protection and fault location methods to apply in modern transmission lines Identify the strengths and limitations of available tools to protect transmission lines against phase-to-phase and phase-to-ground faults Define and address protection problems for high-voltage transmission lines Implement modern directional and distance elements into existing protection Select the best pilot protection schemes for transmission lines Implement directional comparison pilot and line differential protection schemes Explain the effects of reclosing (three-pole and single-pole) and breaker failure protection to preserve the stability of high-voltage transmission systems Training Designed for: This course is intended Electrical maintenance and engineering personnel who wish to gain a better understanding of Transmission Line protection and the procedures to install and configure the Transmission Line Protection Relays. Training Program: DAY ONE: PRE-TEST Introduction Transmission Line Fundamentals Relaying basics Circuit Breakers Primary and Backup relaying Introduction to Symmetrical component EE201 Rev.001 CMCT COURSE OUTLINE Page 2 of 5
3 Current Transformers Potential Transformers DAY TWO: Introduction to the Universal Relay Universal Relay Hardware overview o UR Modular concept o Family members o Hardware configuration Mechanical installation Options and ordering EnerVista UR Setup Software Settings o Production Setup o System Setup Commands o Virtual Inputs o Clear records o Set date and time Actual Valves o Front Panel o Status and Metering o Status and Metering Lab DAY THREE: Introduction to FlexLogic o Logic Gates Programing Flexlogic equations Oscillography and Event Log Lab Fault Diagnostic Lab Saving/loading setting files Maintenance procedures Adding/Removing modules DAY FOUR: L60/L90 Relays Grouped Elements Phase Differential protective theory Protection element calculations for a typical L60 application and demonstration Lab Line Current Differential theory Protection element calculations for a typical L90 application L90 demonstration Lab DAY FIVE: D60 ALPS Relays Introduction to Transmission Lines Distance protection theory EE201 Rev.001 CMCT COURSE OUTLINE Page 3 of 5
4 Stepped distance Zone I extended Pilot aided schemes: DUTT, PUTT, POTT, HYBRID POTT, Directional-blocking Power swings D60 overview Protection element calculations for a typical D60 application and demonstration Lab ALPS overview Hardware overview Mechanical overview Mechanical and wiring instructions Protection element overview Configuration software Communication testing Relay maintenance Course Conclusion POST-TEST and EVALUATION Training Requirement: Hand s on practical sessions, equipment and software will be applied during the course if required and as per the client s request. Training Methodology: This interactive training course includes the following training methodologies as a percentage of the total tuition hours:- 30% Lectures, Concepts, Role Play 30% Workshops & Work Presentations, Techniques 20% Based on Case Studies & Practical Exercises 20% Videos, Software & General Discussions Pre and Post Test Training Certificate(s): Internationally recognized certificate(s) will be issued to each participant who completed the course. Training Fees: As per the course location - This rate includes participant s manual, hand-outs, buffet lunch, coffee/tea on arrival, morning & afternoon of each day. EE201 Rev.001 CMCT COURSE OUTLINE Page 4 of 5
5 Training Timings: Daily Timings: 07:45-08:00 Morning Coffee / Tea 08:00-10:00 First Session 10:00-10:20 Recess (Coffee/Tea/Snacks) 10:20-12:20 Second Session 12:20-13:30 Recess (Prayer Break & Lunch) 13:30-15:00 Last Session For training registrations or in-house enquiries, please contact: Aisha Relativo: aisha@cmc-me.com Tel.: or Mob.: Training & Career Development Department EE201 Rev.001 CMCT COURSE OUTLINE Page 5 of 5
EE028: Practical High Voltage Cable Jointing and Termination
EE028: Practical High Voltage Cable Jointing and Termination EE028 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: The range of voltage and capacity of power transmitted through cables is
More informationImplementation of a High-Speed Distribution Network Reconfiguration Scheme by Greg Hataway, Ted Warren, and Chris Stephens.
The following technical papers supporting this presentation are available at www.selinc.com: Trip and Restore Distribution Circuits at Transmission Speeds by Jeff Roberts and Karl Zimmerman International
More informationRF (Wireless) Fundamentals 1- Day Seminar
RF (Wireless) Fundamentals 1- Day Seminar In addition to testing Digital, Mixed Signal, and Memory circuitry many Test and Product Engineers are now faced with additional challenges: RF, Microwave and
More informationBreaker-and-a-half Automatic reclosing and leader follower.
Breaker-and-a-half Automatic reclosing and leader follower www.siemens.com/siprotec SIPROTEC 5 Application Breaker-and-a-half Automatic reclosing and leader follower APN-018, Edition 1 Content 1... 3 1.1
More informationMICROMASTER Encoder Module
MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified
More informationSIPROTEC 5 Application Note
www.siemens.com/protection SIPROTEC 5 Application Note SIP5-APN-018: Answers for infrastructure and cities. SIPROTEC 5 - Application: SIP5-APN-018 Breaker-and-a-half Automatic reclosing and leader follower
More informationDSIM-AF Installation Guide Revision B
Installation Guide Revision B 1. Quick Start Instructions for Single Pilot AGC Operatation 1. Remove the RF module cover and install the DSIM-AF AGC module into the amplifier. 2. Turn the ALC switch to
More informationRemoval of Decaying DC Component in Current Signal Using a ovel Estimation Algorithm
Removal of Decaying DC Component in Current Signal Using a ovel Estimation Algorithm Majid Aghasi*, and Alireza Jalilian** *Department of Electrical Engineering, Iran University of Science and Technology,
More informationPRE-INSTALLATION ELECTRICAL POWER GUIDE
Benchmark Series Boilers GF-2060 Pre-Installation PRE-INSTALLATION ELECTRICAL POWER GUIDE Natural Gas, Propane Gas, or Dual Fuel Fired Modulating, Condensing Boilers This document applies to the Following
More informationNEW MEXICO STATE UNIVERSITY Electrical and Computer Engineering Department. EE162 Digital Circuit Design Fall Lab 5: Latches & Flip-Flops
NEW MEXICO STATE UNIVERSITY Electrical and Computer Engineering Department EE162 Digital Circuit Design Fall 2012 OBJECTIVES: Lab 5: Latches & Flip-Flops The objective of this lab is to examine and understand
More informationORM0022 EHPC210 Universal Controller Operation Manual Revision 1. EHPC210 Universal Controller. Operation Manual
ORM0022 EHPC210 Universal Controller Operation Manual Revision 1 EHPC210 Universal Controller Operation Manual Associated Documentation... 4 Electrical Interface... 4 Power Supply... 4 Solenoid Outputs...
More informationECE 402L APPLICATIONS OF ANALOG INTEGRATED CIRCUITS SPRING No labs meet this week. Course introduction & lab safety
ECE 402L APPLICATIONS OF ANALOG INTEGRATED CIRCUITS SPRING 2018 Week of Jan. 8 Jan. 15 Jan. 22 Jan. 29 Feb. 5 Feb. 12 Feb. 19 Feb. 26 Mar. 5 & 12 Mar. 19 Mar. 26 Apr. 2 Apr. 9 Apr. 16 Apr. 23 Topic No
More informationAUTOMATIC TRANSFER SWITCHES. Product Guide
AUTOMATIC TRANSFER SWITCHES Product Guide CUSTOM CONFIGURATION The chart tells the story. You can custom configure switches by choosing the exact components needed. This standard process allows Kohler
More informationDigital Logic. ECE 206, Fall 2001: Lab 1. Learning Objectives. The Logic Simulator
Learning Objectives ECE 206, : Lab 1 Digital Logic This lab will give you practice in building and analyzing digital logic circuits. You will use a logic simulator to implement circuits and see how they
More informationFieldbus Testing with Online Physical Layer Diagnostics
Technical White Paper Fieldbus Testing with Online Physical Layer Diagnostics The significant benefits realized by the latest fully automated fieldbus construction & pre-commissioning hardware, software
More informationMedium and High Voltage Circuit Breakers Characteristic Time Quantities of the Circuit Breaker with Applications
Workshop 6: Maintenance and monitoring Medium and High Voltage Circuit Breakers Characteristic Time Quantities of the Circuit Breaker with Applications Alexander Herrera OMICRON electronics GmbH 3 December
More informationAutomatic Transfer Switch Control PLC Operator s Manual
MTS Power Products MIAMI FL 33142 ATS-22AG Automatic Transfer Switch Control PLC Operator s Manual Dedicated Single Phase Transfer Switch ATS-22AG Automatic Transfer Switch INTRODUCTION 1.1 Preliminary
More informationDSIM-GI Installation Guide Revision P
Installation Guide Revision P 1. Quick Start Instructions for Single Pilot AGC Operatation 1. With the ADU jumper in Auto position, turn ADU pot to MIN amplifier output level. Then place the ADU jumper
More informationDIGITAL INSTRUMENTS S.R.L. SPM-ETH (Synchro Phasor Meter over ETH)
DIGITAL INSTRUMENTS S.R.L. SPM-ETH (Synchro Phasor Meter over ETH) SPM-ETH (Synchro Phasor Meter over ETH) Digital Instruments 1 ver the years, an awareness of the criticality of the Power Grid and Orelated
More informationSPECIAL SPECIFICATION :1 Video (De) Mux with Data Channel
1993 Specifications CSJ 0924-06-223 SPECIAL SPECIFICATION 1160 8:1 Video (De) Mux with Data Channel 1. Description. This Item shall govern for furnishing and installing an 8 channel digital multiplexed
More informationREFURBISHMENT OF SECONDARY SYSTEMS IN HIGH VOLTAGE SUBSTATIONS LESSONS LEARNED IN VENEZUELA
21, rue d'artois, F-75008 Paris http://www.cigre.org B3-110 Session 2004 CIGRÉ REFURBISHMENT OF SECONDARY SYSTEMS IN HIGH VOLTAGE SUBSTATIONS LESSONS LEARNED IN VENEZUELA by E. PADILLA * L. CEDEÑO E. PELAYO
More informationFINAL REPORT LOAD SHEDDING IN TASMANIA ON 20 DECEMBER 2016 REVIEWABLE OPERATING INCIDENT REPORT FOR THE NATIONAL ELECTRICITY MARKET
FINAL REPORT LOAD SHEDDING IN TASMANIA ON 20 DECEMBER 2016 REVIEWABLE OPERATING INCIDENT REPORT FOR THE NATIONAL ELECTRICITY MARKET Published: 6 April 2017 IMPORTANT NOTICE Purpose AEMO has prepared this
More informationUsing on-chip Test Pattern Compression for Full Scan SoC Designs
Using on-chip Test Pattern Compression for Full Scan SoC Designs Helmut Lang Senior Staff Engineer Jens Pfeiffer CAD Engineer Jeff Maguire Principal Staff Engineer Motorola SPS, System-on-a-Chip Design
More informationDIN Power Module - Phase Adaptive
DIN Power Module ow Capacity Phase Adaptive DIN Power Module - Phase Adaptive 369849a 1 08.06.15 The Phase Adaptive Power Module family is a group of modular products for the control of lighting loads.
More informationV9A01 Solution Specification V0.1
V9A01 Solution Specification V0.1 CONTENTS V9A01 Solution Specification Section 1 Document Descriptions... 4 1.1 Version Descriptions... 4 1.2 Nomenclature of this Document... 4 Section 2 Solution Overview...
More informationLaboratory 1 - Introduction to Digital Electronics and Lab Equipment (Logic Analyzers, Digital Oscilloscope, and FPGA-based Labkit)
Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science 6. - Introductory Digital Systems Laboratory (Spring 006) Laboratory - Introduction to Digital Electronics
More informationLAB 3 Verilog for Combinatorial Circuits
Goals LAB 3 Verilog for Combinatorial Circuits Learn how to design combinatorial circuits using Verilog. Design a simple circuit that takes a 4-bit binary number and drives the 7-segment display so that
More informationToronto Hydro - Electric System
Toronto Hydro - Electric System FIT Commissioning Requirements and Reports Comments and inquiries can be e-mailed to: FIT@torontohydro.com Customers without e-mail access can submit through regular mail
More informationTelephony Training Systems
Telephony Training Systems LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 04/2018 Table of Contents General Description 2 Topic Coverage 6 Features & Benefits 6 List of Available Training Systems
More informationEG4015. Digital Generator Governor Controller User Manual
EG4015 Digital Generator Governor Controller User Manual Digital Governor for use in Gas and Diesel Generators with smoke and idle controls. Senses generator frequency, no magnetic pickup unit (MPU) is
More informationLAB 3 Verilog for Combinational Circuits
Goals To Do LAB 3 Verilog for Combinational Circuits Learn how to implement combinational circuits using Verilog. Design and implement a simple circuit that controls the 7-segment display to show a 4-bit
More informationSession 1 Introduction to Data Acquisition and Real-Time Control
EE-371 CONTROL SYSTEMS LABORATORY Session 1 Introduction to Data Acquisition and Real-Time Control Purpose The objectives of this session are To gain familiarity with the MultiQ3 board and WinCon software.
More informationBenchmark and Benchmark Platinum Electrical Power Guide
Pre-Installation Application Guide Benchmark and Benchmark Platinum Electrical Power Guide Benchmark Models 750 through 6000 Other documents for this product include: OMM-0115, GF-200 BMK 750-3000 Platinum
More informationCOMPUTER ENGINEERING PROGRAM
COMPUTER ENGINEERING PROGRAM California Polytechnic State University CPE 169 Experiment 6 Introduction to Digital System Design: Combinational Building Blocks Learning Objectives 1. Digital Design To understand
More informationThe Newsletter of Delta Automation Inc.
VOL 3 ISSUE 10 Summer 2004 The Newsletter of Delta Automation Inc. Electrical Storms and effects on Modbus Plus Systems A brief explanation Of TDR operation Modicon Trivia Question TWO WINNERS!! Correctly
More informationTABLE OF CONTENTS. Instructions:
TABLE OF CONTENTS Instructions: 1 Overview 1 2 Main technical parameters 1 3 Display and keyboard 2 3.1 Display Window 2 3.2 Indicator 4 4. Operation 4 4.1 Power 4 4.2 Zero 4 Modified 4 4.3 Modified 4
More informationHITACHI. VisionCube. Service Manual
HITACHI VisionCube Service Manual 1 Before Service Work Begins 1.1. What This Manual Covers 1-2 1.2. Related Materials 1-2 1.3. Special Items To Note When Performing Service 1-3 1.4. Tools Required 1-4
More informationINSTRUCTION MANUAL AUTORECLOSING RELAY GRR100 - B
INSTRUCTION MANUAL AUTORECLOSING RELAY GRR1 - B Toshiba Energy Systems Solutions Corporation 217 All Rights Reserved. ( Ver. 1.1) Safety Precautions Before using this product, please read this chapter
More informationex 800 Series ematrix System
Protecting Your Human Assets During Emergency ex 800 Series ematrix System The ex 800 Series ematrix System is a fully integrated and versatile public address system which is designed distinctively to
More informationPRINCIPLES AND APPLICATIONS
GENERATION & NETWORK Digital Automation Measuring and Control Devices AMS7000 PROCOM The optimum operation of an electrical network depends particularly on the reliability and the availability of the protection,
More informationTelephony Training Systems
Telephony Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Topic Coverage 6 Features & Benefits 6 List of Available Training Systems
More informationThis document is a reference document that shows the menus in the 5500sc, 9610sc and 9611sc analyzers. There are 3 top-level menus:
Controller menus 5500sc, 9610sc and 9611sc analyzers DOC273.53.80566 Introduction This document is a reference document that shows the menus in the 5500sc, 9610sc and 9611sc analyzers. There are 3 top-level
More informationDLP600M 6+1 Relay Module for Heating and Cooling Plants
Product Sheet TH6.25 Thermostat Type DLP600M DLP600M 6+1 Relay Module for Heating and Cooling Plants The DLP 600 M is a relay module for activation of loads (namely thermal actuators or circulators) in
More information1993 Specifications CSJ , etc. SPECIAL SPECIFICATION ITEM CCTV Central Equipment
1993 Specifications CSJ 0922-33-042, etc. SPECIAL SPECIFICATION ITEM 8549 CCTV Central Equipment 1. Description. This Item shall govern for the furnishing and installation of closed circuit television
More informationLABORATORY EXPERIMENTS IN DISTANCE LEARNING
LABORATORY EXPERIMENTS IN DISTANCE LEARNING Ingvar Gustavsson 1 Session 8B1 Abstract In engineering education, laboratory experiments are indispensable, but they do require instruments and experimental
More informationOperating Instructions 07/2007 Edition. SINAMICS G130/G150 Line harmonics filter. sinamics
Operating Instructions 07/2007 Edition SINAMICS G130/G150 Line harmonics filter sinamics s Safety information 1 General 2 SINAMICS SINAMICS G130/G150 Operating Instructions Mechanical installation 3 Electrical
More informationENGG2410: Digital Design Lab 5: Modular Designs and Hierarchy Using VHDL
ENGG2410: Digital Design Lab 5: Modular Designs and Hierarchy Using VHDL School of Engineering, University of Guelph Fall 2017 1 Objectives: Start Date: Week #7 2017 Report Due Date: Week #8 2017, in the
More informationFCC PART 15 CLASS B MEASUREMENT AND TEST REPORT. Tritech Technology Ltd.
FCC PART 15 CLASS B MEASUREMENT AND TEST REPORT For Tritech Technology Ltd. Unit 8B,Chung pont Commercial Building No.300 Hennessy Road, Wanchai, HongKong Model: 0-545-24967-8, 0-545-24986-4 Report Type:
More informationINSTRUCTION MANUAL BREAKER FAILURE RELAY GRC100
INSTRUCTION MANUAL BREAKER FAILURE RELAY GRC100 Toshiba Energy Systems & Solutions Corporation 2017 All Rights Reserved. ( Ver. 1.5) Safety Precautions Before using this product, please read this chapter
More informationInstruction Manual. DLP-C Digital Line Protection. GE Power Management
g GE Power Management DLP-C Digital Line Protection Instruction Manual Digital Transmission Line Relaying System with Three-Pole Tripping DLP-C Revision: V002.740C Manual P/N: GEK-100680C Copyright 2000
More informationMANAGING POWER SYSTEM FAULTS. Xianyong Feng, PhD Center for Electromechanics The University of Texas at Austin November 14, 2017
MANAGING POWER SYSTEM FAULTS Xianyong Feng, PhD Center for Electromechanics The University of Texas at Austin November 14, 2017 2 Outline 1. Overview 2. Methodology 3. Case Studies 4. Conclusion 3 Power
More informationSAPLING MASTER CLOCKS
SAPLING MASTER CLOCKS Sapling SMA Master Clocks Sapling is proud to introduce its SMA Series Master Clock. The standard models come loaded with many helpful features including a user friendly built-in
More informationPractical Exercise Look at the circuit diagram shown. What will happen in this circuit if switch S2 is pressed momentarily?
Practical Exercise 3 1. Two electronics technicians are discussing the resistance of copper wire. Technician A says that the resistance of copper wire increases as its cross-sectional area increases. Technician
More informationDLP200M 2 Relay Module for Heating and Cooling Plants
Product Sheet TH6.24 Thermostat Type DLP200M DLP200M 2 Relay Module for Heating and Cooling Plants The DLP 200 M is a relay module for activation of loads (namely thermal actuators or circulators) in wireless
More informationCourse Outline Cover Page
Course Outline Cover Page Video System and Products Servicing VEE 224 Course Title Department and Number Course Description: This course is designed to provide students with the knowledge and experience
More informationMitigation of Cascading Outages and Prevention of Blackouts:System-Wide Corrective Control
10th Mediterranean Conference on Power Generation, Transmission, Distribution and Energy Conversion 6-9 November 2016 Belgrade, Serbia Mitigation of Cascading Outages and Prevention of Blackouts:System-Wide
More informationTEAMS Competition 2014
TEAMS Competition 2014 Electrical Grid Urban infrastructures throughout the United States are aging. As our demand for electricity grows, so does our need for uninterrupted service for more than 130 million
More informationMICROFOCUS X-RAY SOURCE PROJECT*
MICROFOCUS X-RAY SOURCE PROJECT* Dan Mancuso, CHESS, Cornell University, NY, USA ABSTRACT At the Cornell High Energy Synchrotron Source (CHESS), scientists in all fields and from all over the world utilize
More informationMSC+ Controller. Operation Manual
MSC+ Controller Operation Manual Contents Introduction... 1 Controls and Indicators...1 Programming the Controller... 3 Definitions...3 Programming Checklist...3 Power-Up the Controller...4 Clock Status
More informationCURRENT INJECTION RELAY TESTER CR-100. ( Code P60212 (770081) ) INSTRUCTIONS MANUAL ( M / 05A ) (c) CIRCUTOR S.A.
CURRENT INJECTION RELAY TESTER CR-100 ( Code P60212 (770081) ) INSTRUCTIONS MANUAL ( M 981 329 / 05A ) (c) CIRCUTOR S.A. ---- CURRENT- TIME TRIP TESTER CR-100 --------------- Page. 2 CURRENT INJECTION
More informationCITY OF LOS ANGELES CIVIL SERVICE COMMISSION CLASS SPECIFICATION POSTED JUNE VIDEO TECHNICIAN, 6145
CITY OF LOS ANGELES CIVIL SERVICE COMMISSION CLASS SPECIFICATION POSTED JUNE 1999 04-26-96 VIDEO TECHNICIAN, 6145 Summary of Duties: Operates municipal access equipment for City departments, City Council
More informationIntroduction To LabVIEW and the DSP Board
EE-289, DIGITAL SIGNAL PROCESSING LAB November 2005 Introduction To LabVIEW and the DSP Board 1 Overview The purpose of this lab is to familiarize you with the DSP development system by looking at sampling,
More informationCARLETON UNIVERSITY. Facts without theory is trivia. Theory without facts is bull 2607-LRB
CARLETON UNIVERSITY Deparment of Electronics ELEC 267 Switching Circuits February 7, 25 Facts without theory is trivia. Theory without facts is bull Anon Laboratory 3.: The T-Bird Tail-Light Control Using
More information3200NT System 14. Service Manual. IMPORTANT: Fill in Pertinent Information on Page 3 for Future Reference
3200NT System 14 Service Manual IMPORTANT: Fill in Pertinent Information on Page 3 for Future Reference Table of Contents Job Specification Sheet... 3 Timer Operation... 4 System Operation In Service...
More informationCable Broadband Premises Installation and Service
Hands-On Cable Broadband Premises Installation and Service Course Description This Hands-On Broadband Premises Installation and Service for Cable Telecommunications course covers the knowledge needed to
More informationDX-10 tm Digital Interface User s Guide
DX-10 tm Digital Interface User s Guide GPIO Communications Revision B Copyright Component Engineering, All Rights Reserved Table of Contents Foreword... 2 Introduction... 3 What s in the Box... 3 What
More informationModbus for SKF IMx and Analyst
User manual Modbus for SKF IMx and SKF @ptitude Analyst Part No. 32342700-EN Revision A WARNING! - Read this manual before using this product. Failure to follow the instructions and safety precautions
More informationData Acquisition Networks. Installing and Configuring the DM01 Hardware
Data Acquisition Networks Installing and Configuring the DM Hardware What is the DM? D.A.N developed the DM-2 to capture 6 analogue measurements and pulse count in the field. The Average, Maximum and Minimum
More informationAPPROVED for connection to Telecommunication systems specified in the instructions for use subject to the conditions set out in them.
TM COMSPHERE 3900 Series Modems Models 3910 and 3911 Government Requirements for Great Britain Document Number 3910-A2-GK42-10 November 1996 Overview This document highlights government requirements, safety
More informationGet a 360 view on Power Supplies
Get a 360 view on Power Supplies Advanced Power Supply Measurements Seminar including practical examples and demonstrations with the power supply specialists Steven M. Sandler (Picotest) and Dr. Ali Shirsavar
More informationLABORATORY EXPERIMENTS IN DISTANCE LEARNING
LABORATORY EXPERIMENTS IN DISTANCE LEARNING Ingvar Gustavsson 1 Abstract In engineering education, laboratory experiments are indispensable, but they do require instruments and experimental equipment to
More information#P46. Time Domain Reflectometry. Q: What is TDR and how does it work?
#P46 Time Domain Reflectometry is a technique used to determine the signal s distance from source to load. The delay found inherent in the environment can be compensated for through automatic calibration,
More informationSPX-5600 Series. Operations Manual. Suprex Reader Extender - RF Wireless Interface SPX-5600MAN. Page 1 of 20
SPX-5600 Series Operations Manual Suprex Reader Extender - RF Wireless Interface SPX-5600MAN Page 1 of 20 SPX-5600 Series: Cypress Suprex SPX-5600 Series This manual covers the operation and setup of the
More informationT +31 (0) F
Thomas Feed is a computer for the control of a dry feed system that is used to give all of your animals ad-lib feeding. This computer is exceptionally easy to use. Icons on the large screen show the available
More informationTRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL
www.prolight.co.uk TRANSCENSION 6-CHANNEL PACK (order code: BOTE40) USER MANUAL SAFETY WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this
More information3AH3 Vacuum Circuit-Breakers
Catalog HG 11.03 Edition 2018 3AH3 Vacuum Circuit-Breakers Medium-Voltage Equipment siemens.com/3ah3 2 3AH3 Vacuum Circuit-Breakers Siemens HG 11.03 2018 R-HG11-373.tif Contents 3AH3 Vacuum Circuit-Breakers
More informationTesting Digital Systems II
Testing Digital Systems II Lecture 5: Built-in Self Test (I) Instructor: M. Tahoori Copyright 2010, M. Tahoori TDS II: Lecture 5 1 Outline Introduction (Lecture 5) Test Pattern Generation (Lecture 5) Pseudo-Random
More informationSINAMICS G130 / G150. Line harmonics filter. Operating Instructions 05/2010 SINAMICS
SINAMICS G130 / G150 Line harmonics filter Operating Instructions 05/2010 SINAMICS s Safety information 1 General 2 SINAMICS SINAMICS G130 / G150 Operating Instructions Mechanical installation 3 Electrical
More informationDimming actuators GDA-4K KNX GDA-8K KNX
Dimming actuators GDA-4K KNX GDA-8K KNX GDA-4K KNX 108394 GDA-8K KNX 108395 Updated: May-17 (Subject to changes) Page 1 of 67 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2 TECHNICAL DATA...
More informationPrevious Lecture Sequential Circuits. Slide Summary of contents covered in this lecture. (Refer Slide Time: 01:55)
Previous Lecture Sequential Circuits Digital VLSI System Design Prof. S. Srinivasan Department of Electrical Engineering Indian Institute of Technology, Madras Lecture No 7 Sequential Circuit Design Slide
More informationMULTIDYNE INNOVATIONS IN TELEVISION TESTING & DISTRIBUTION DIGITAL VIDEO, AUDIO & DATA FIBER OPTIC MULTIPLEXER TRANSPORT SYSTEM
MULTIDYNE INNOVATIONS IN TELEVISION TESTING & DISTRIBUTION INSTRUCTION MANUAL DVM-1000 DIGITAL VIDEO, AUDIO & DATA FIBER OPTIC MULTIPLEXER TRANSPORT SYSTEM MULTIDYNE Electronics, Inc. Innovations in Television
More informationAPPLICATION NOTE # Monitoring DTMF Digits Transmitted by a Phone
APPLICATION NOTE # Product: 930A Communications Test Set 930i Communications Test Set Monitoring DTMF Digits Transmitted by a Phone Introduction This Application Note describes how to configure and connect
More informationDMC550 Technical Reference
DMC550 Technical Reference 2002 DSP Development Systems DMC550 Technical Reference 504815-0001 Rev. B September 2002 SPECTRUM DIGITAL, INC. 12502 Exchange Drive, Suite 440 Stafford, TX. 77477 Tel: 281.494.4505
More informationExcel recommends Fluke Networks, this section is written around the use of this range of test equipment.
Testing Excel recommends Fluke Networks, this section is written around the use of this range of test equipment. Twisted Pair Copper This section describes and sets out the requirements for Class D (Cat
More informationStepArray+ Self-powered digitally steerable column loudspeakers
StepArray+ Self-powered digitally steerable column loudspeakers Acoustics and Audio When I started designing the StepArray range in 2006, I wanted to create a product that would bring a real added value
More informationSwitching Power Module
Assembled in U.S.A. 5005757 Rev. A GCU-HOSP 243C ID. COT. EQ. IEC PEV /EC Class 2 +.800.523.9466 + 44.(0)20.7680.448 HomeWorks DI Power odule Switching Power odule The Switching Power odule family is a
More informationFORENSIC CASEBOOK. By Bob Huddleston, Eastman Chemical Co. One of the most common. reasons for marriage failure
The Case of the Energized Cable Cutting Incident How miscommunication leads to an electrical helper slicing through live 13.8kV cable and miraculously walking away to tell about it By Bob Huddleston, Eastman
More informationUnderstanding. Here s an examination of high-frequency pathological signal transmission issues in today s high-bandwidth equipment.
Understanding Feature blocking capacitor effects Here s an examination of high-frequency pathological signal transmission issues in today s high-bandwidth equipment. By Renaud Lavoie W hy should we do
More informationSAPLING WIRED SYSTEM
SAPLING WIRED SYSTEM Sapling 2-Wire System DESCRIPTION The Sapling 2-Wire System is one of the most innovative and advanced wired systems in the synchronized time industry. It starts with the SMA Series
More informationVLSI Test Technology and Reliability (ET4076)
VLSI Test Technology and Reliability (ET476) Lecture 9 (2) Built-In-Self Test (Chapter 5) Said Hamdioui Computer Engineering Lab Delft University of Technology 29-2 Learning aims Describe the concept and
More informationAdding Analog and Mixed Signal Concerns to a Digital VLSI Course
Session Number 1532 Adding Analog and Mixed Signal Concerns to a Digital VLSI Course John A. Nestor and David A. Rich Department of Electrical and Computer Engineering Lafayette College Abstract This paper
More informationCDP-0, CDP-G, CDP-DUO INSTRUCTION MANUAL (M B)
Dynamic power control -0, -G, -DUO INSTRUCTION MANUAL (M98250001-03-17B) 2 SAFETY PRECAUTIONS Follow the warnings described in this manual with the symbols shown below. DANGER Warns of a risk, which could
More informationEC456 Power System Protection Lab #1 Overcurrent Protection Relay
EC456 Power System Protection Lab #1 Overcurrent Protection Relay Learning Objectives: Understand the building blocks of a numerical protection relay Understand the HMI of the relay. Establish communication
More informationBER MEASUREMENT IN THE NOISY CHANNEL
BER MEASUREMENT IN THE NOISY CHANNEL PREPARATION... 2 overview... 2 the basic system... 3 a more detailed description... 4 theoretical predictions... 5 EXPERIMENT... 6 the ERROR COUNTING UTILITIES module...
More informationCOMFORT COMFORT CALL OWNER S MANUAL CALL SYSTEM P/N P BASE STATION & RF WIRELESS MODULE. Complete Control from TOTALINE
OWNER S MANUAL COMFORT CALL SYSTEM P/N P374-0433 COMFORT BASE STATION & RF WIRELESS MODULE CALL TOTALINE REMOTE THERMOSTAT ACCESS Compatible with thermostat models: P374-700, P374-800, P374-900, P374-2700,
More informationR1MS-GH3 BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL THERMOCOUPLE & DC INPUT MODULE MODEL. (8 points; isolated)
INSTRUCTION MANUAL THERMOCOUPLE & INPUT MODULE (8 points; isolated) MODEL BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below.
More informationSentinel I24 Digital Input and Output Configuration
Application Bulletin: #155 Date: October 19, 2007 Sentinel I24 Digital Input and Output Configuration The Sentinel I24 can communicate with external hardware using digital inputs and outputs. There are
More informationIntegration Note. Any feature not specifically noted as supported should be assumed to be unsupported.
Integration Note Manufacturer: Model Number(s): Crestron Processor Version: Driver Developer: Sky (UK) Sky+, Sky+ HD, Sky Multi-room Tested on 3 Series Processors, support for other versions not guaranteed
More informationELEC 310 Digital Signal Processing
ELEC 310 Digital Signal Processing Alexandra Branzan Albu 1 Instructor: Alexandra Branzan Albu email: aalbu@uvic.ca Course information Schedule: Tuesday, Wednesday, Friday 10:30-11:20 ECS 125 Office Hours:
More informationImproved Synchronization System for Thermal Power Station
Improved Synchronization System for Thermal Power Station Lokeshkumar.C 1, Logeshkumar.E 2, Harikrishnan.M 3, Margaret 4, Dr.K.Sathiyasekar 5 UG Students, Department of EEE, S.A.Engineering College, Chennai,
More information