GSC2mini - Pneumatic/Hydraulic Timer Based Valve-Gate Sequence Controller lnstruction Manual
|
|
- Jack Howard
- 6 years ago
- Views:
Transcription
1 Valve-Gate Sequence Controller lnstruction Manual
2 CONTENTS 1. Installation Overview 2. Power 3. Interface Features 5. Getting Started 6. Mode Examples 7. Wiring Specifications 4. Mode Descriptions CAUTION A minimum of one gate must be opened at the start of the injection fward (signal) (time=0sec.) with zero (0) Delay (DEL) time. Failure to do so may cause damage to the Hot Runner system. Page INCOE 01/17
3 1. INSTALLATION OVERVIEW Pneumatic Installation Hydraulic Installation COMING SOON GSC2mini Controller Input Air Connect Optional Pneumatic Valve Stack Injection Fward Signal Pneumatic Valve Stack Cable Power Cd 2016 INCOE 01/17 Page 3
4 This page intentionally left blank. Page INCOE 01/17
5 2. POWER A) Main Power Input: 115/120/220 VAC B) Signal Input Power: 24 VDC from Machine when Injection Fward C) Solenoid Valve Output Power: 24 VDC Less than 1.5A per GATE 3. INTERFACE FEATURES GSC2mini Left Select 6 Machine Injection Fward/Mold 10 OPEN LED indicates the gate is open 2 Up Select Closed 24 VDC Signal Input Indicat 11 OPEN display indicates time gate 3 Right Select 7 Mode A Indicat LEDs remains open 4 Down Select 8 Mode B Indicat LEDs 12 DELAY (DEL) display indicates time 5 Ouput Voltage LED Indicat 9 Mode B2 Indicat LEDs when gate is to open 2016 INCOE 01/17 Page 5
6 4. MODE DESCRIPTIONS Mode A - Able to set Delay (DEL) Time only. All gates stay open during injection signal (Mode A LEDs are illuminated). Mode B - Able to Set Delay Time and Open Time (Mode B LEDs are illuminated). Mode B2 - Able to set Delay Time, Open Time and Second Delay Time and Open Time (Both Mode A & Mode B LEDs are illuminated). Gate Off - A/B Mode LEDs, DEL /OPEN display panel off. 5. GETTING STARTED Connect Cables from GSC2mini 1. Connect 24 VDC output cable to Solenoid Valve Stack. 2. Connect 24 VDC input cable to injection fward machine output. 3. Plug in unit to a 115/120/220 VAC power outlet. Power on Press Power To Select Mode 1. Press and Hold Mode f 4 seconds. Mode LED of 1st gate flashes. 2. While Mode LED is flashing press up down to scroll through mode types (A Mode B Mode B2 Mode (A & B mode LEDs will be flashing) Off (A & B flashing separately). 3. Press left right to change between gates and repeat mode selection f each gate. This must be done while displays are flashing mode function times out and Mode will need to be pressed again. 4. Keep idle f 4 seconds to automatically save. GSC2mini - Pneumatic/Hydraulic Timer Based To Change Unit Selection (Decimal Placement): 1. Move to Gate (1-8) using While Gate DEL Display is flashing, press and hold Mode f 4 seconds,"uni" (Unit) displays in DEL panel and / 9.99 displays in OPEN panel f that gate. 2. While OPEN panel digits are flashing press up Page INCOE 01/17 down to change unit selection (decimal place) f that gate. 3. Once unit is selected f that gate, press left right to change between gates and repeat unit selection (#2). Must be done while displays are flashing Unit Selection times out and must repeat unit selection process. 4. Keep idle f 4 seconds to automatically save. To Manually Open Gates: A. To Manually Open all Gates 1. Press OPEN 2. To close Gates press Open again. B. To Manually Open an Individual Gate 1. Move to Gate (1-8) using 2. Once at selected gate, press OPEN while the Gate Display is flashing.
7 To Set DEL Time In Mode A 1. Set desired gates to Mode A. 2. Move to Gate (1-8) using 3. Once at selected Gate, press Enter to select (Right Digit in DEL display will flash). 4. To set the time, press up down while DEL display is flashing. 5. To move between digits, press left right. 6. Press Enter keep idle f 4 seconds to automatically save. To Set DEL Time AND OPEN Time In Mode B 1. Set desired gates to Mode B. 2. Move to Gate (1-8) using 3. Once at selected gate, to change between DEL and Open display press up down. While display is flashing press Enter to select (Right Digit in display will flash). To Set 1st and 2nd DELAY Time AND OPEN Time In Mode B2 1. Set desired gates to Mode B2. 2. Move to Gate (1-8) using 3. Once at selected gate de1 (Delay 1) will be displayed. Press up down to scroll through op1 (Open 1), de2 (Delay 2) and op2 (Open 2). The Delay Open value will be flashing below. 4. Press Enter to select (Right Digit in display will flash). 5. To set the time, press up down while digit is flashing. 6. To move between digits, press left right. 7. Press Enter keep idle f 4 seconds to automatically save. 4. To set time, press up down while display is flashing. 5. To move between digits, press left right. 6. Press Enter keep idle f 4 seconds to automatically save INCOE 01/17 Page 7
8 6. MODE EXAMPLES CAUTION: A minimum of one gate must be opened at the start of the injection fward (signal) (time=0 sec.) with zero (0) Delay (DEL) time. Failure to do so may cause damage to the Hot Runner system. MODE A MODE B Select Mode A to have a Closed Gate open at a set delay time (DEL). Select Mode B to have a Closed Gate open at a set delay time The gate will remain open until injection signal is finished. (DEL). Then close that gate at a set open time. INJECTION INJECTION T 0 sec 4 sec 10 sec EXAMPLE: (First gate opens at Signal (not shown). Second gate opens 4 seconds later). 1. Injection signal: 10 seconds and DEL time: 4 seconds. After DEL time, gate 2 opens f 6 seconds. 2. The delay time counts down and displays it in DEL display panel, and just after DEL time, gate 2 opens. 3. If injection signal is off befe delay time passed, the gate will not open. 4. After DELAY time has passed and the injection signal remains on, gate 2 opens, and displays that time in the OPEN display panel. 5. When injection signal is off, delay set time will be displayed in DEL display panel. The OPEN display panel displays counted open time until next injection signal comes on. 0 sec 4 sec 10 sec EXAMPLE: (First gate opens at Signal (not shown). Second gate opens 4 seconds later). 1. Injection signal: 10 seconds, DEL time: 4 seconds and OPEN time: 4 seconds. When injection signal comes on, after DEL time, the gate opens f OPEN time (4 seconds). 2. The delay time counts down and displays it in DEL display panel. 3. If injection signal is off befe delay time passed, the gate resets to set time. 4. When injection signal is off, delay set time and open set time will be displayed in DEL display panel OPEN display panel respectively. Page INCOE 01/17
9 MODE B-2 Select Mode B-2 to have a Closed Gate open at a set Delay (DEL) time. The gate will remain open past the injection fward signal f a set time (Pack and Hold Phase). 7. WIRING SPECIFICATIONS GSC2mini - Pneumatic/Hydraulic Valve-Gate Sequence Controller INJECTION (Figure 1) (Figure 2) 0 sec 4 sec 10 sec -4 sec EXAMPLE: (Keeping gate open during pack and hold phase). Injection time: 10 seconds, DEL time: 4 seconds, open time: - 4 seconds) Note: Open time is entered as a negative number. 1. The gate gets the injection signal and after 4 seconds open the gate then the gate stays open during signal time. After the injection signal is completed, the gate stays open f the next 4 seconds and then close the gate. 2. The delay time counts down and displays it in DEL display panel. After DEL time it displays OPEN time until finishing signal. After that, it counts down and displays in OPEN display panel. 3. If injection signal is off befe delay time passed, the gate becomes initialization as setting time. VALVE 1 VALVE 2 VALVE 3 VALVE 4 VALVE 5 VALVE 6 VALVE 7 VALVE COMMON (Figure 3) (Figure 4) 1. Power Input Connection: Connect power plug in 115/120/220 VAC socket (Figure 2). 2. Signal Input Connection: Connect cable signal injection output (Figure 2). 3. Gate Output Connection 4. Connect Solenoid Valve (Figure 3 and Figure 4). CAUTION Use the same electric poles using 24 VDC Solenoid Valve connection INCOE 01/17 Page 9
10 INCOE Cpation Global Headquarters 1740 E. Maple Road Troy, Michigan USA T: + 1 (248) E: info@incoe.com Technical Suppt: T: + 1 (248) E: tech.suppt@incoe.com Customer Service and Sales: T: + 1 (248) E: sales@incoe.com
GSC2mini - Pneumatic/Hydraulic Timer Based. lnstruction Manual
GSC2mini - Pneumatic/Hydraulic Timer Based Valve-Gate Sequence Valve-Gate Controller Sequence - Instruction Controller Manual lnstruction Manual CONTENTS 1. Installation Overview 2. Power 3. Interface
More informationGSCmini - Pneumatic Timer Based Valve-Gate Sequence Controller lnstruction Manual
lnstruction Manual CONTENTS 1. Power 4. Getting Started 2. Interface Features 5. Mode Examples 3. Mode Descriptions 6. Wiring Specifications CAUTION A minimum of one gate must be opened at the start of
More information1. Uses. 2. Power Supply. 1) Removal or Positioning of Weld Lines. 2) Regulation of the Injection Quantity by Gate Operation
1. Uses YUDO have produced the Sequence Injection Timer - SIT500 Series to provide a means of controlling the mould filling sequence when using Valve Gate Hot- Runner Systems. The Sequence Injection Timer
More informationOperating instructions Electronic preset counter Type series 717
Operating instructions Electronic preset counter Type series 717 1. Description 5.98.3_gb 6-digit adding/subtracting counter with two presets Very bright 8mm high LED display Counting and preset range
More informationMATE3 Owner s Manual Addendum
Purpose MATE3 Owner s Manual Addendum This document is an addendum to 900-0117-01-00, Revision C of the MATE3 System Display and Controller Owner s Manual. It provides descriptions of changes to the MATE3
More informationSynchronization Check Relay ARGUS 7
Synchronization Check Relay ARGUS 7 Page 1 of 8 Table of Contents Secondary injection tests:... 3 Phase Angle Test:... 3 CS PHASE ANGLE:... 3 SS PHASE ANGLE:... 3 SLIP FREQUENCY TEST:... 4 CS SLIP FREQUENCY:...
More informationSTD-525T PRECISION TIMER
FN:STD525TM1.DOC STD-525T PRECISION TIMER DESCRIPTION The STD-525T Precision Timer measures and displays accurate elapsed time in minutes, seconds, tenths of seconds, and hundredths of seconds (MM.SS.TH)
More informationRevision 1.2d
Specifications subject to change without notice 0 of 16 Universal Encoder Checker Universal Encoder Checker...1 Description...2 Components...2 Encoder Checker and Adapter Connections...2 Warning: High
More informationSprite TL Quick Start Guide
Sprite TL Quick Start Guide with 115 VAC Power Cord and 4-Conductor Signal Cable Reference Manual Sprite TL Online and downloadable Product Manuals and Quick Start Guides are available at www.hydrosystemsco.com
More informationORM0022 EHPC210 Universal Controller Operation Manual Revision 1. EHPC210 Universal Controller. Operation Manual
ORM0022 EHPC210 Universal Controller Operation Manual Revision 1 EHPC210 Universal Controller Operation Manual Associated Documentation... 4 Electrical Interface... 4 Power Supply... 4 Solenoid Outputs...
More informationVLC-3 USER'S MANUAL. Light Program Controller. M rev. 04 K rev. 00 & ( ( 5, 352*5$0 1 : $ 2 ' 6(77,1*6 )81&7,216
Light Program Controller VLC-3 USER'S MANUAL +50,1 +50,1 1 : $ ' 2 7. 6 8 ' 5, 7 6 6. $ ( 3 352*5$0 0,16(& )81&7,216 6(77,1*6 & 8 5 5 ( 1 7 3 ( 5, 2 ' M 890-00189 rev. 04 K 895-00406 rev. 00 GENERAL...
More informationINSTRUCTION MANUAL. J800 Weld Controller. 3/25/2018 Revision
INSTRUCTION MANUAL J800 Weld Controller 3/25/2018 Revision 1.1.1.1 THIS PAGE IS INTENTIONALLY LEFT BLANK ii INSTALLATION AND OPERATION Janda Company, Inc. J800 WELDING CONTROLLER TO END USERS: This Weld
More information(Cat. No IJ, -IK)
(Cat. No. 1771-IJ, -IK) Product Data The Encoder/Counter Module Assembly (cat. no. 1771-IJ or 1771-IK) maintains a count, independent of the processor, of input pulses that may typically originate from
More informationSentinel I24 Digital Input and Output Configuration
Application Bulletin: #155 Date: October 19, 2007 Sentinel I24 Digital Input and Output Configuration The Sentinel I24 can communicate with external hardware using digital inputs and outputs. There are
More informationOperating Manual. Basic Control BC16. two-channel for eco moon
Operating Manual Basic Control BC16 two-channel for eco moon Dear Customer, Thank you for choosing a WALTRON daytime lighting controller. Your daytime lighting controller is a high-quality product that
More informationOUTDOOR IRRIGATION CONTROLLER LDC-6 LDC-11. User Manual
OUTDOOR IRRIGATION CONTROLLER LDC- LDC- User Manual TABLE OF CONTENTS Table of Contents Introduction The Controller Introduction to Programming Watering Schedules Water Budgeting and Seasonal Adjustment
More informationCOILS COUPLING TABLE COILS/ELECTROPILOTS ELECTROPILOTS/SOLENOID VALVES. Electropilots. Coils. Solenoid valves G6 GL6.
COUPLING TABLE COILS/ELECTOPILOTS ELECTOPILOTS/SOLENOID VALVES Electropilots A B AA(U1) AA(U3) AB (U2) Coils U04 U05 U1 U2 U3 10 mm 15 mm 22 mm 30 mm 30 mm BE AE BD ACN CL CM ISO 1 ISO 2 ISO 3 ISO 4 ISO
More informationAE-341 SERIES PROCESS INDICATORS 2 TO 6 DIGITS 0-20 MA, 4-20 MA, 0-5V, OR 0-10V SCALED INPUT
FN: 341MAN1.DOC AE-341 SERIES PROCESS INDICATORS 2 TO 6 DIGITS 0-20 MA, 4-20 MA, 0-5V, OR 0-10V SCALED INPUT DESCRIPTION AE Series Process Indicators are available with 1", 2.3", 4", 8", or 12" high digits,
More informationINSTALLATION MANUAL FT-FOTR-1VDE-ST-S
INSTALLATION MANUAL FT-FOTR-1VDE-ST-S 1-Channel Digital Duplex Baseband Video Transmitter and Receiver With Reverse Data Transmission & Ethernet Transmission v1.0 4/5/11 1 PACKAGE CONTENTS This package
More informationAT450SAW Programmable Selective Amplifier
AT450SAW Programmable Selective Amplifier LEMELETTRONICA srl Via Grezze 38 25015 Desenzano del Garda (BS) ITALY Tel. +39 030-9120006 Fax +39 030-9123035 www.lemelettronica.it Technical Specifications
More informationModular Lube Lubrication Systems System Controls
Model 84501 Program Timer Solid State Designed to control the lubrication cycle frequency of air-operated single-stroke pumps. Timer turns pump on/off at programmed intervals via a 3-way or 4-way air solenoid
More informationWeekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N
Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control
More informationK9123, K9134, K9135 Remote Programming Instructions and Specifications
K9123, K9134, K9135 Remote Programming Instructions and Specifications 12 Volt Signal Ground Signal Plug Door Push & Hold K9123 K9134 K9135 Before pairing the receiver to the remotes, the receiver must
More informationTDEPD. Field-Programmable Pressure Switch/Transducer with Integrated LED Display. Programming Sequence Manual
TDEPD Field-Programmable Pressure Switch/Transducer with Integrated LED Display Programming Sequence Manual Wiring Diagram Pin5 Maintenance Mode + Gray Vent Pin2 Digital Output 2 +/ Analog Output + White
More informationSolenoid Valves. Inline Valves IV. Nominal diameter 3 mm. Suitability for Industry-Specific Applications Schmalz - Applications.
Solenoid s Inline s IV Nominal diameter 3 mm Suitability for Industry-Specific Applications Applications Inline valve for deactivation of unused suction pads Individual control of the suction pads of a
More informationDescription. Never run out of envelopes again.
Contour Description Never run out of envelopes again. Contour is a quad envelope generator. Each channel has looping, CV over attack and decay, as well as unique chaining capabilities. This makes for the
More informationTRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL
www.prolight.co.uk TRANSCENSION 6-CHANNEL PACK (order code: BOTE40) USER MANUAL SAFETY WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this
More informationBooBox Flex. OPERATING MANUAL V1.1 (Feb 24, 2010) 6 Oakside Court Barrie, Ontario L4N 5V5 Tel: Fax:
BooBox Flex OPERATING MANUAL V1.1 (Feb 24, 2010) 6 Oakside Court Barrie, Ontario L4N 5V5 Tel: 905-803-9274 Fax: 647-439-1470 www.frightideas.com Connections The BooBox Flex is available with Terminal Blocks
More informationStandard signal metering in wall-mounting case
User manual AKV-2VR4C Standard signal metering in wall-mounting case Technical features: Digit height: 20 mm Colour: red Range of display: -999 9999 Wall-mounting case: black, made of ABS-plastic Protection
More informationSPX-5600 Series. Operations Manual. Suprex Reader Extender - RF Wireless Interface SPX-5600MAN. Page 1 of 20
SPX-5600 Series Operations Manual Suprex Reader Extender - RF Wireless Interface SPX-5600MAN Page 1 of 20 SPX-5600 Series: Cypress Suprex SPX-5600 Series This manual covers the operation and setup of the
More informationAES-404 Digital Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-404 Digital Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web: www.broadcast-devices.com
More informationVorne Industries. 87/719 Analog Input Module User's Manual Industrial Drive Itasca, IL (630) Telefax (630)
Vorne Industries 87/719 Analog Input Module User's Manual 1445 Industrial Drive Itasca, IL 60143-1849 (630) 875-3600 Telefax (630) 875-3609 . 3 Chapter 1 Introduction... 1.1 Accessing Wiring Connections
More informationValve Amplification Company
Valve Amplification Company Standard Musicbloc 160 Monoblock Tube Amplifier Instructions 15 February 2005 Please read carefully before installing Copyright 2006 by Valve Amplification Company. All rights
More informationDesign and Manufacture of Video Pipeline Inspection Systems A Full Service Company
Design and Manufacture of Video Pipeline Inspection Systems A Full Service Company www.rstechserv.com 1315 Controller OPERATIONS MANUAL Made in the USA Table Of Contents: Page 3 Page 5 Page 6 Page 7 Page
More informationINSTALLATION MANUAL FT-FOTR-8VD-ST-S. 8-Channel Digital Duplex Baseband Video Transmitter and Receiver With Reverse Data Transmission for PTZ Cameras
INSTALLATION MANUAL FT-FOTR-8VD-ST-S 8-Channel Digital Duplex Baseband Transmitter and Receiver With Reverse Transmission for PTZ Cameras v1.0 4/5/11 1 PACKAGE CONTENTS This package contains: One each
More informationINSTALLATION INSTRUCTIONS FOR. MODEL 2230LED
INSTALLATION INSTRUCTIONS FOR MODEL 2230LED www.sportablescoreboards.com 1 Table of Contents MODEL 2230LED... 3 8 X 4 INDOOR SCOREBOARD... 3 THE SCOREBOARD SYSTEM SHOULD INCLUDE THE FOLLOWING PARTS:...
More informationAES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web:
More informationCOMPONENTS & COMPONENTS & ACCESSORIES
COMPONENTS & Accessories 135-145 135 COMPONENTS & ACCESSORIES REMOTE CONTROL 137-138 SOAP DISPENSERS 138 MIXING VALVES 139 SOLENOID KEY 140 REMOTE CONTROLS PERFECT TIME CONTROL ASSEMBLY 140 COVER PLATE
More informationDigital differential pressure controller Model DPD Instruction manual
Digital differential pressure controller Model DPD Instruction manual DPDeng_rev2 September 09 MECAIR S.r.l. Diaphragm Valves and Electronic Controls for Dust Collector Filters Via per Cinisello 97 20054
More informationTE s AGASTAT relays are available in two basic operating types: On-Delay and Off-Delay.
TE s AGASTAT relays are available in two basic operating types: On-Delay and Off-Delay. On-Delay: Provides a delay period on energization, at the end of which the switch contacts transfer. De-energizing
More informationGeniSys Display. Contractor s Tool. Description / Applications. for the GeniSys Advanced Burner Control
PARTS & ACCESSORIES GeniSys Display or Contractor s Tool for the GeniSys Advanced Burner Control Description / Applications The Beckett GeniSys TM Display is an optional attachment for the GeniSys Primary
More information12months. on-site warranty. DZE ELECTRONIC PRESSURE SWITCH for detection of overload per EN 81 2 featuring two adjustable switching points
BUCHER PRODUCTS AVAILABLE FROM HYDRATEC DZE ELECTRONIC PRESSURE SWITCH for detection of overload per EN 81 2 featuring two adjustable switching points 12months on-site warranty All our work comes with
More informationTHE ASTRO LINE SERIES GEMINI 5200 INSTRUCTION MANUAL
THE ASTRO LINE SERIES GEMINI 5200 INSTRUCTION MANUAL INTRODUCTION The Gemini 5200 is another unit in a multi-purpose series of industrial control products that are field-programmable to solve multiple
More informationSpecification Type 1.1 Interface
1 Specification Type 1.1 Interface Version: 20080725.0v The following description shows the specification for the Type 1 Interface for digital printing machines. Signals used on the Type 1 Interface Slave
More informationBuild A Video Switcher
Build A Video Switcher VIDEOSISTEMAS serviciotecnico@videosistemas.com www.videosistemas.com Reprinted with permission from Electronics Now Magazine September 1997 issue Copyright Gernsback Publications,
More informationTable of Contents. 1. Description of Timer!!! Operating Instructions!!! Operation Examples!!!
MT Timer Manual Table of Contents 1. Description of Timer!!! 3 2. Operating Instructions!!! 4 2-1 General!!!! 4 2-2 Manual & Manual + Modes! 4 2-3 Auto & Auto - Modes!! 5 2-4 Reactivity Mode!!! 7 2-5 Program
More informationAT47SAW Programmable Selective Amplifier
AT47SAW Programmable Selective Amplifier LEMELETTRONICA srl Via Grezze 38 25015 Desenzano del Garda (BS) ITALY Tel. +39 030-9120006 Fax +39 030-9123035 www.lemelettronica.it Technical Specifications N
More informationWaferPar HEX 12 CKU (US) / CKE (EU) USER MANUAL
WaferPar HEX 12 CKU01-2140 (US) / CKE01-2140 (EU) USER MANUAL Introduction Thank you for purchasing the ColorKey WaferPar HEX 12. Please read these instructions carefully before use. Operating this fixture
More informationTeamWork Kits Installation Guide
TX 0 RX COM +5V APARATUS US TeamWork Kits Installation Guide TeamWork 400 and TeamWork 600 Kits The TeamWork 400 and TeamWork 600 kits consist of an HDMI switcher, system controller, Cable Cubby, and cables
More informationDigital differential Pressure switch Model DPS Instruction manual
Digital differential Pressure switch Model DPS Instruction manual DPSeng_rev2 September 09 MECAIR S.r.l. Diaphragm Valves and Electronic Controls for Dust Collector Filters Via per Cinisello 97 20054 Nova
More informationUNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load Cell
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com UNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load
More informationAK-PVE4 Operating Instructions. Measuring of norm signals in wall-type units. Performance:
AK-PVE4 Operating Instructions Measuring of norm signals in wall-type units 1 2 P Performance: Digit heights: 20 mm Colour: red Display range: -999 9999 Wall-type housing: light grey made of ABS-plastic
More informationOperating Instructions (ed. 5.97) Electronic Preset Counter Type Series 904
Operating Instructions 3.96.3 (ed. 5.97) Electronic Preset Counter Type Series 904 1. Description 6 digit preset counter, 2 presets, add./subtr. bright 2-line LCD display with symbols for activated outputs
More informationTrusted 40 Channel Analogue Input FTA
PD-T8830 Trusted Trusted 40 Channel Analogue Input FTA Product Overview The Trusted 40 Channel Analogue Input Field Termination Assembly (FTA) T8830 is designed to act as the main interface between a field
More informationTroubleshooting CS800/LC900 Bikes
Troubleshooting CS800/LC900 Bikes CS800/900LC Bike Troubleshooting Entering the Maintenance Mode 15 Touch Screen: The Maintenance Mode is designed to help the tech determine certain faults in the upper
More informationUser Manual CC DC 24 V 5A. Universal Control Unit UC-1-E. General Information SET. Universal Control Unit UC-1 Of Central Lubrication PAUSE CONTACT
Universal Control Unit UC-1-E User Manual General Information Universal Control Unit UC-1 Of Central Lubrication CC DC 24 V 5A / M 15 SL /MK 31 M Z 30 General Information Contents Universal Control Unit
More informationIntellex Digital Video Management System. Troubleshooting Guide
Intellex Digital Video Management System Troubleshooting Guide 2 Intellex Digital Video Management Sysem Notice Copyright The infmation in this manual was current when published. The manufacturer reserves
More informationUser Manual M1. Thermocouple type K, B, S, N, E, T, R, L, J. Technical features:
User Manual M1 Thermocouple type K, B, S, N, E, T, R, L, J Technical features: red display of -1999 9999 digits (optional: green, orange or blue display) minimal installation depth: from 63 mm with plug-in
More informationMG-XV operating instruction. Measuring of norm signals, 4-8-digit. Panel instrument type MG-BV Construction instrument type MG-AV
MG-XV operating instruction Measuring of norm signals, 4-8-digit Panel instrument type MG-BV Construction instrument type MG-AV Contents 1. Brief description... 3 2. Safety instructions... 3 2.1. Proper
More informationModel DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Model DT-311J And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL 1. GENERAL The DT-311J DIGITAL
More informationDigital Gap Checker to 0.15 mm (Displayable/Settable range: 10 to 300) G type Rated distance range. Workpiece. Large gap. Workpiece.
3-Color Display New F type Rated distance range.1 to.3 mm (Displayable/Settable range: to 6) Digital Gap Checker G type Rated distance range.2 to.15 mm (Displayable/Settable range: 1 to 3) H type Rated
More informationFOREST SHUTTLE S / L / M RECEIVER
2 FOREST SHUTTLE S / L / M RECEIVER QUICK INSTALLATION OF ASSEMBLED TRACKS : Programming Shuttle S / L / M Receiver to a channel One pre-assembled motorized curtain track systems is standard programmed
More informationK3NX Process Meter OPERATION MANUAL
Cat.No. N90 E1 1 K3NX Process Meter OPERATION MANUAL K3NX Process Meter Operation Manual Produced January 1998 Notice: OMRON products are manufactured for use according to proper procedures by a qualified
More informationINSTALLATION INSTRUCTIONS FOR
INSTALLATION INSTRUCTIONS FOR MODEL 2240LED www.sportablescoreboards.com 1 Table of Contents 8 X 7 INDOOR SCOREBOARD... 3 THE SCOREBOARD SYSTEM SHOULD INCLUDE THE FOLLOWING PARTS:... 3 INSTRUCTIONS FOR
More informationBattery Operated Controllers
ALL SEASONAL ADJUSTMENT 1 Battery Operated Controllers Owner s Manual and Programming Instructions RUN PRG SENSOR BYPASS SYSTEM OFF CURRENT TIME/DAY ACTIVE MANUAL-ALL STATIONS START TIMES MANUAL-ONE STATION
More informationPackage Contents. LED Protocols Supported. Safety Information. Physical Dimensions
Pixel Triton Table of Contents Package Contents... 1 Safety Information... 1 LED Protocols Supported... 1 Physical Dimensions... 1 Software Features... 2 LED Status... 2 Power... 2 Activity LED... 2 Link
More informationSM-1100/SM-1500/SM-1600 ROTARY ACTUATORS
SM-1100/SM-1500/SM-1600 ROTARY ACTUATORS GENERAL DESCRIPTION The SM-1100, SM-1500 and SM-1600 Series are multi-turn, rotary actuators, designed to meet the exacting requirements for closed-loop modulating
More informationSureFire PDI Lubricator
SureFire PDI Lubricator Automatic, Oil & Fluid Grease General The SureFire PDI Lubricator is an automatic, robust and durable pump that can handle oil and soft greases. Its compact size is designed to
More informationMANUAL ENG DT-1000CI ENGLISH QPSK
ENG-3 010914 01034 ENGLISH QPSK A versatile digital receiver with a guaranteed future One of the advantages of is its flexible construction. The receiver is equipped with a Common Interface, which enables
More informationOperating Instructions
CNTX Contrast sensor Operating Instructions CAUTIONS AND WARNINGS SET-UP DISTANCE ADJUSTMENT: As a general rule, the sensor should be fixed at a 15 to 20 angle from directly perpendicular to the target
More informationJunior Max (JR Max ) Controller
Get more done TM Junior Max (JR Max ) Controller stations Operating Instructions Thank you for purchasing this advanced, highly featured Irritrol Junior MAX controller. The Junior MAX is the latest addition
More informationMulti-functional safety relay modules PROTECT SRB-E
Multi-functional safety relay modules PROTECT SRB-E PROTECT SRB-E The configurable User-friendly Up to 16 different applications can be selected Monitoring of all conventional safety switchgear Safety
More informationModel 6527 & 6827 Single Line Scoreboard Owner s Manual
Model 6527 & 6827 Single Line Scoreboard Owner s Manual Portatree Eliminator 2000 Compatible Rev C RaceAmerica Corp. 280 Martin Ave. Unit#1 Santa Clara, CA 95050 (408) 988-6188 www.raceamerica.com info@raceamerica.com
More informationArbor Scientific PO Box 2750 Ann Arbor, Michigan (800) Timer & Photogates 2.0 P Owners Manual
Arbor Scientific PO Box 2750 Ann Arbor, Michigan 48108 www.arborsci.com (800) 367-6695 Timer & Photogates 2.0 P4-1450 Owners Manual Stopwatch 0.01 second resolution to 999999.99 seconds Count FCC Compliance
More informationRebis Audio Ltd. RA226 Digital Sampler User Guide
Rebis Audio Ltd. RA226 Digital Sampler User Guide CONTENTS Page Caution 2 Powering Up 2 Controls 3, 4 Detailed Description Input Level Set 5 Recording 5 Sampling 5 Multiple Samples 6 Editing 6 Playback
More informationUser Manual M1. Direct current / Direct voltage signals 0-20 ma, 4-20 ma, 0-10 VDC. Technical features:
M1_61GB.pdf update: 17.09.2014 72x36 User Manual M1 Direct current / Direct voltage signals 0-20 ma, 4-20 ma, 0-10 VDC Technical features: red display of -1999 9999 digits (optional: green, orange or blue
More informationSolid-State Digital Timer
Solid-State Digital Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay,
More information4.0 Description. 2-channel operation D1 and D2 rated at 200 VA each. 1-channel operation D1 rated at 400 VA (see connection chap. 6.
_307 238_EN_LUXOR 405_310 410 01_D.qxd 21.09.16 10:54 Seite 1 Operating Manual Dimmer module 4050100 1.0 Designated use The LUXOR dimmer module expands the existing LUXOR series of devices. It switches
More informationBooBox FlexMax. OPERATING MANUAL V1.1 (Aug 14, 2011) 6 Oakside Court Barrie, Ontario L4N 5V5 Tel: or
BooBox FlexMax OPERATING MANUAL V1.1 (Aug 14, 2011) 6 Oakside Court Barrie, Ontario L4N 5V5 Tel: 1-877-815-5744 or 905-803-9274 www.frightideas.com Table of Contents Getting Familiar with your FlexMax...
More informationDigital Differential Pressure Gauge Switch 0.1 : 0.5 BAR USER GUIDE
Digital Differential Pressure Gauge Switch 0.1 : 0.5 BAR USER GUIDE Table of Contents GETTING STARTED DESCRIPTION Display Mechanical Electrical Mounting Programmable Settings Default Factory Settings PARTS
More informationAES Channel Digital/Analog Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-408 8 Channel Digital/Analog Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide
More informationCamera 220C Document Camera User s Guide
Camera 220C Document Camera User s Guide #401-220C-00 Table of Contents TABLE OF CONTENTS... 0 TABLE OF CONTENTS... 1 COPYRIGHT INFORMATION... 2 CHAPTER 1 PRECAUTIONS... 3 CHAPTER 2 PACKAGE CONTENT...
More informationAHP-1200CPV Cold/Warm Plate Product Manual Volume 1.3
AHP-1200CPV Cold/Warm Plate Product Manual Volume 1.3 Page Table of Contents Description 1 Cover Page 2 Left Intentionally Blank 3 Table of Contents 4 AHP-1200CPV 5 What s in the Box? 6 Safety Features
More informationInstallation and User Guide 458/CTR8 8-Channel Ballast Controller Module
Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Helvar Data is subject to change without notice. www.helvar.com i Contents Section Page Introduction 1 Installation 2 1. Attach
More informationSample BD Tech Concepts LLC
XYZ Corp. Fry Controller FC-1234 Operating Specification Copyright 2014 Brian Dunn BD Tech Concepts LLC Contents Last Modified: 00/00/0000 Introduction 2 Interface 3 Idle 5 Cooking Cycle 5 Displaying and
More informationIEFIS G3 Inputs, outputs and Alarms
IEFIS G3 Inputs, outputs and Alarms Document version: 2, May 2016 User manual on the use and configuration of the analog and digital inputs and digital outputs as well as Alarm setup and use. Related equipement:
More informationINSTALLATION INSTRUCTIONS MODEL VSBX-236 LED 3 X 8 INDOOR SCOREBOARD
1 INSTALLATION INSTRUCTIONS MODEL VSBX-236 LED 3 X 8 INDOOR SCOREBOARD NOTE TO INSTALLERS: PLEASE RETURN THIS MANUAL TO THE INDIVIDUAL IN CHARGE OF THE SCOREBOARD UPON COMPLETION OF INSTALLATION. The scoreboard
More informationHS-509 VIBRATION TRIP MODULE
HS-509 VIBRATION TRIP MODULE 1. Overview The HS-509 is a configurable trip amplifier capable of accepting a 4-20mA signal from a HS-420 sensor and providing two trip action relay outputs along with an
More informationMS2540 Current Loop Receiver with RS485 Communication
MS2540 Current Loop Receiver with RS485 Communication User Manual Metal Samples Company A Division of Alabama Specialty Products, Inc. 152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358 4202 Fax:
More informationPlease read this manual before using the C961 Display. Suzhou Bafang Electric Motor Science-Technology Co., LTD
Manual C961 Contents Material & color 3 Functions & buttons 3 Functions 3 Interface 4 ON/OFF 5 The display switches off automatically if there is no activity for ten minutes (default). 5 Walking assist
More informationINSTALLATION & USER GUIDE
INSTALLATION & USER GUIDE Digidim 458 8-Channel Dimmer STEP 1 Assemble Dimmer Unit STEP 2 Mount Dimmer Chassis STEP 3 Electrical Installation STEP 4 Attach Module and Make Connections STEP 5 Replace Cover
More informationTransfer Switch. OTECA (Spec A) OTECB (Spec A) OTECC (Spec A) OTECD (Spec A) Amperes. English Original Instructions (Issue 5)
Operator Manual Transfer Switch 40-1000 Amperes OTECA (Spec A) OTECB (Spec A) OTECC (Spec A) OTECD (Spec A) English Original Instructions 10-2015 962-0131 (Issue 5) Table of Contents 1. SAFETY PRECAUTIONS...
More informationSample BD Tech Concepts LLC
XYZ Corp. Fry Controller FC-1234 Software Test Procedure Copyright 2014 Brian Dunn BD Tech Concepts LLC Last Modified: 00/00/0000 Version Tested: Date Tested: Technician: Results: 1 FC-1234 SW Test Proc.
More informationHigh Performance (Gold Plus) Spliceable Tape Feeder Part Number: Part Number: Revision 3 Jun 2008 No.
8mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934707 12mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934807 Revision 3 Jun 2008 No. 0930D-E010 i Table
More informationST8-WiFi Timer. Installation Guide and Operations Manual. English MIN M D YYYY
ST8-WiFi Timer Installation Guide and Operations Manual AM M D YYYY English Contents ST8-WiFi Timer Installation Guide and Operations Manual Introduction Welcome to Rain Bird... 1 Timer Features... 1 Controls
More information1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
More informationUser s Guide. ECx Features: Automatic Sprinkler System Timer
TM User s Guide Automatic Sprinkler System Timer RAIN DELAY SEAS ADJUST ZE RUN TIMES AUTO / TIME / DAY WATERING DAYS PROGRAM TIMES PROGRAMS MANUAL NEXT ECx Features: Expandable Up To 8 Zones With Plug-In
More information35058-TE. PLJ-6LED-A LED Frequency Display Module Manual
35058-TE 6-digit LED Frequency Counter Module GREEN DISPLAY LED Frequency Display Module Manual Three Swords Studio Light Rongsheng 2013, March Guangxi Nanning Longan Information including Links and Code
More informationAutomation Interface Requirements for J602 Basic I/O Interface of a DPC 4 Welding System
- 1 - Automation Interface Requirements for J602 Basic I/O Interface of a DPC 4 Welding System The DPC 4 welding system offers several features that are intended to communicate with automation. These features
More informationUSERS MANUAL GR ONE 300 GR ONE 700 GR ONE 1400
USERS MANUAL GR ONE 300 GR ONE 700 GR ONE 1400 PURE SOUND USER MANUAL PURPOSE This user manual is dedicated to the use of the bass amplifiers GR-ONE 700, GR-ONE700x2 and GR-ONE 300. The manual includes
More information