StandardProducts DieCatalog
|
|
|
- Russell Goodman
- 5 years ago
- Views:
Transcription
1 StandardProducts Catalog 3600U.S.Hwy52SouthLafayete,Indiana47905 Main: Sales:
2 Welcome to Nanshan America's new and fully integrated extrusion facility in Lafayette, Indiana. We aim to be the industry leading producer of quality standard aluminum extrusions while providing exceptional service and competitive prices to our service center community. We hope you enjoy our new standard die catalog and thank you for your interest in Nanshan America.
3 Contents Capabilities 3 Rod 4 Rectangular & Manifold Bar 5-9 Square Bar 10 Hexagonal Bar 11 Tube - Structural Pipe - Structural 14 Square Tube Sharp Corners 15 Square Tube Radius Corners 16 Rectangular Tube Sharp Corners 17 Rectangular Tube Radius Corners 18 American Standard Equal Leg Angle 19 American Standard Unequal Leg Angle 20 Architectural Equal Leg Angle 21 Architectural Unequal Leg Angle 22 American Standard Channel 23 Aluminum Association Channel 24 Architectural Channel 25 American Standard I-Beam 26 Aluminum Association I-Beam 27 American Standard H-Beam 28 American Standard Wide Flange Beam 29 American Standard Tee 30 Architectural Tee 31 Canadian Tee 32 American Standard Zee 33 Version 1.9
4 Extrusion Capabilities The above diagram shows Nanshan's maximum range of capabilities. The maximum sizes can vary depending on the alloy, material thickness, profile complexity, and tolerances. Please contact our sales team for confirmation and quoting of profiles 5000 Ton Presezzi Extrusion Press 12" Billet Range: Up to 10 Length Range: 12' - 60' Seamless: Min OD - Max OD 9200 Ton SMS Meer Extrusion Press 14" & 18" Billet Range: Up to 50 Length Range: 12' - 86' Press Alloys Tempers 6005A F O (Annealed) T1 T4 T T52 T6 T61 T6511 Packing Options Paper Layer Paper Interleave Foam Layer Foam Interleave Strip Separation Cardboard Wrap Kitting *Not all alloys are avaliable in all listed tempers 3
5 Rod Tolerances listed apply to 6061-T6511 is based on 6061 alloy A A (+/-.004) (+/-.017) (+/-.004) (+/-.017) (+/-.004) (+/-.017) (+/-.004) (+/-.017) (+/-.005) (+/-.017) (+/-.005) (+/-.017) (+/-.005) (+/-.017) (+/-.005) (+/-.017) (+/-.005) (+/-.017) (+/-.005) (+/-.017) (+/-.005) (+/-.017) (+/-.005) (+/-.017) (+/-005) (+/-.017) (+/-.005) (+/-.017) (+/-.005) (+/-.022) (+/-.008) (+/-.022) (+/-.008) (+/-.022) (+/-008) (+/-.022) (+/-.008) (+/-.022) (+/-.008) (+/-.022) (+/-.008) (+/-.022) (+/-.008) (+/-.022) (+/-.008) (+/-.022) (+/-.008) (+/-.008) (+/-.012) (+/-012) (+/-.012) (+/-.012) (+/-.012) (+/-.012) (+/-.012) (+/-.017) (+/-.017)
6 Rectangular Bar / Manifold Bar Bars.500" or thicker meet manifold bar requirements Tolerances listed apply to 6061-T6511 is based on 6061 alloy A (+/-.007) (+/-.024) (+/-.007) (+/-.034) (+/-.008) (+/-024) (+/-.008) (+/-.024) (+/-.008) (+/-.024) (+/-.008) (+/-.034) (+/-.008) (+/-.034) (+/-.008) (+/-.044) (+/-.008) (+/-.054) (+/-.016) (+/-.084) (+/-.008) (+/-.034) (+/-.008) (+/-.044) (+/-.008) (+/-.024) (+/-.008) (+/-.024) (+/-.008) (+/-.024) (+/-.008) (+/-.034) (+/-.008) (+/-.034) (+/-.008) (+/-.044) (+/-.008) (+/-.054) (+/-.016) (+/-.074) (+/-.016) (+/-.084) (+/-.016) (+/-.094) Manifold Quality (+.009/-.000) (+.012/-.000) (+.009/-.000) (+.012/-.000) (+.009/-.000) (+.012/-.000) (+.009/-.000) (+.014/-.000) (+.009/-.000) (+.024/-.000) (+.009/-.000) (+.024/-.000) (+.009/-.000) (+.024/-.000) (+.009/-.000) (+.024/-.000) (+.009/-.000) (+.034/-.000) (+.009/-.000) (+.034/-.000) (+.009/-.000) (+.044/-.000) B
7 Rectangular Bar / Manifold Bar Bars.500" or thicker meet manifold bar requirements Tolerances listed apply to 6061-T6511 is based on 6061 alloy A B (+.009/-.000) (+.044/-.000) (+.009/-.000) (+.054/-.000) (+.017/-.000) (+.074/-.000) (+.017/-.000) (+.084/-.000) (+.009/-.000) (+.012/-.000) (+.009/-.000) (+.012/-.000) (+.009/-.000) (+.014/-.000) (+.009/-.000) (+.024/-.000) (+.009/-.000) (+.024/-.000) (+.009/-.000) (+.024/-.000) (+.009/-.000) (+.024/-.000) (+.009/-.000) (+.024/-.000) (+.009/-.000) (+.034/-.000) (+.009/-.000) (+.044/-.000) (+.009/-.000) (+.054/-.000) (+.017/-.000) (+.074/-.000) (+.017/-.000) (+.084/-.000) (+.010/-.000) (+.012/-.000) (+.010/-.000) (+.014/-.000) (+.010/-.000) (+.024/-.000) (+.010/-.000) (+.024/-.000) (+.010/-.000) (+.024/-.000) (+.010/-.000) (+.024/-.000) (+.010/-.000) (+.024/-.000) (+.010/-.000) (+.034/-.000) (+.010/-.000) (+.034/-.000) (+.010/-.000) (+.034/-.000) (+.010/-.000) (+.044/-.000) (+.010/-.000) (+.044/-.000) (+.010/-.000) (+.054/-.000) (+.018/-.000) (+.074/-.000) (+.018/-.000) (+.084/-.000) (+.010/-.000) (+.024/-.000) (+.010/-.000) (+.044/-.000)
8 Rectangular Bar / Manifold Bar Bars.500" or thicker meet manifold bar requirements Tolerances listed apply to 6061-T6511 is based on 6061 alloy A B (+.010/-.000) (+.054/-.000) (+.012/-.000) (+.012/-.000) (+.012/-.000) (+.014/-.000) (+.012/-.000) (+.014/-.000) (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.034/-.000) (+.012/-.000) (+.034/-.000) (+.012/-.000) (+.034/-.000) (+.012/-.000) (+.044/-.000) (+.012/-.000) (+.054/-.000) (+.019/-.000) (+.074/-.000) (+.019/-.000) (+.084/-.000) (+.019/-.000) (+.084/-.000) (+.012/-.000) (+.034/-.000) (+.012/-.000) (+.044/-.000) (+.012/-.000) (+.054/-.000) (+.012/-.000) (+.014/-.000) (+.012/-.000) (+.014/-.000) (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.034/-.000) (+.012/-.000) (+.034/-.000) (+.012/-.000) (+.034/-.000) (+.012/-.000) (+.044/-.000) (+.012/-.000) (+.054/-.000) (+.019/-.000) (+.084/-.000) (+.014/-.000) (+.024/-.000) (+.014/-.000) (+.024/-.000)
9 Rectangular Bar / Manifold Bar Bars.500" or thicker meet manifold bar requirements Tolerances listed apply to 6061-T6511 is based on 6061 alloy A B (+.014/-.000) (+.024/-.000) (+.014/-.000) (+.024/-.000) (+.014/-.000) (+.034/-.000) (+.014/-.000) (+.034/-.000) (+.014/-.000) (+.034/-.000) (+.014/-.000) (+.044/-.000) (+.014/-.000) (+.044/-.000) (+.014/-.000) (+.054/-.000) (+.024/-.000) (+.074/-.000) (+.014/-.000) (+.084/-.000) (+.014/-.000) (+.054/-.000) (+.024/-.000) (+.074/-.000) (+.014/-.000) (+.024/-.000) (+.014/-.000) (+.024/-.000) (+.014/-.000) (+.024/-.000) (+.014/-.000) (+.024/-.000) (+.014/-.000) (+.034/-.000) (+.014/-.000) (+.034/-.000) (+.014/-.000) (+.044/-.000) (+.024/-.000) (+.084/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.044/-.000) (+.024/-.000) (+.054/-.000) (+.034/-.000) (+.074/-.000) (+.034/-.000) (+.084/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000)
10 Rectangular Bar / Manifold Bar Bars.500" or thicker meet manifold bar requirements Tolerances listed apply to 6061-T6511 is based on 6061 alloy A B (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.044/-.000) (+.024/-.000) (+.044/-.000) (+.024/-.000) (+.054/-.000) (+.024/-.000) (+.024/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.044/-.000) (+.024/-.000) (+.044/-.000) (+.024/-.000) (+.054/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.044/-.000) (+.034/-.000) (+.034/-.000) (+.034/-.000) (+.034/-.000) (+.034/-.000) (+.044/-.000) (+.034/-.000) (+.054/-.000) (+.034/-.000) (+.034/-.000) (+.034/-.000) (+.034/-.000) (+.034/-.000) (+.044/-.000) (+.034/-.000) (+.034/-.000) (+.034/-.000) (+.044/-.000) (+.034/-.000) (+.044/-.000)
11 Square Bar All square bar meets manifold bar requirements Tolerances listed apply to 6061-T6511 is based on 6061 alloy A A (+.012/-.000) (+.024/-.000) (+.012/-.000) (+.024/-.000) (+.014/-.000) (+.034/-.000) (+.014/-.000) (+.034/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.034/-.000) (+.024/-.000) (+.044/-.000)
12 Hexagonal Bar Tolerances listed apply to 6061-T6511 is based on 6061 alloy A A (+.005/-.005) (+.006/-.006) (+.005/-.005) (+.006/-.006) (+.005/-.005) (+.012/-.012) (+.006/-.006) (+.012/-.012)
13 Tube - Structural is based on 6061 alloy A (OD) B (ID) C (Wall)
14 Tube - Structural is based on 6061 alloy A (OD) B (ID) C (Wall)
15 Pipe - Structural is based on 6061 alloy Designation Pipe Size Schedule No. A (OD) B (ID) C (Wall)
16 Square Tube is based on 6061 alloy A B
17 Square Tube Radius Corners is based on 6061 alloy A B C D
18 Rectangular Tube is based on 6061 alloy A B C
19 Rectangular Tube Radius Corners is based on 6061 alloy A B C R R
20 American Standard Equal Angle is based on 6061 alloy A B C D
21 American Standard Unequal Angle is based on 6061 alloy A B C D E
22 Architectural Equal Angle is based on 6063 alloy A B
23 Architectural Unequal Angle is based on 6063 alloy A B C
24 American Standard Channel is based on 6061 alloy A B C D E F G / / / / / / / / / / / / / / / / / / /
25 Aluminum Association Channel is based on 6061 alloy A B C D E
26 Architectural Channel is based on 6061 alloy A B C
27 American Standard I-Beam is based on 6061 alloy A B C D E F
28 Aluminum Association I-Beam is based on 6061 alloy A B C D E
29 American Standard H-Beam is based on 6061 alloy A B C D E F
30 American Standard Wide Flange Beam is based on 6061 alloy A B C D E
31 American Standard Tee is based on 6061 alloy A B C D E F
32 Architectural Tee is based on 6061 alloy A B C
33 Canadian Tee is based on 6061 alloy A B C D E
34 American Standard Zee is based on 6061 alloy A B T R R
BORING INSTRUCTIONS. If part is being mounted to a structural tee, angle iron or steel plate, drill holes as indicated below: 3/8 (.
BORING INSTRUCTIONS DJUST--BODY TENSIONER WITH THREDED BOLT Drill and tap holes as indicated below: DJUST--BODY TENSIONER WITH THREDED EYE If part is being mounted using an Invisiware Fixed Tab or Threaded
Support Frame STB Technical Instruction Manual
Support Frame STB Technical Instruction Manual Fig. 2.1: Support frame STB 450 Fig. 2.2: Support frame STB 300 Fig. 2.3: Brace bracket SK 150 Product Characteristics The support frames are mainly used
Sign Frames & Accessories. Eastern Metal Supply Quality Shapes In Aluminum. 12 Fixed Retainer Sign Frame x 24 6 SF-12R
Signage EMS has an extensive stock of sign frames, raceways & raceway lids, retainers, flex face signage, double tees, half-round posts, and a full line of aluminum standards including Square Tube (Standards
Channel Cable Tray - Accessories
Splice Plate The Splice Plate has the standard 4-hole pattern for all cable channel. Provided with straight sections and fittings. 9(*)-1043 3 (76) 9(*)-1044 4 (101) 9(*)-1044-6 6 (152) Horizontal Adjustable
MCX Miniature Coaxial Connectors
ONLINE CATALOG MCX Miniature Coaxial Connectors 104 John W. Murphy Drive P.O. Box 510 New Haven, CT 06513 www.aepconnectors.com e-mail: aepsales@aepconnectors.com Mating Interfaces MCX Miniature Coaxial
Everything under control
FLYER UK 3-2018 01.07.2018 30.09.2018 WELDING TABLES AND CLAMPING SYSTEMS Everything under control THE SIEGMUND TABLE REDEFINED SUB TABLE BOX YOUR TOOLS ALWAYS AT HAND Create storage space under your welding
Mechanical aspects, FEA validation and geometry optimization
RF Fingers for the new ESRF-EBS EBS storage ring The ESRF-EBS storage ring features new vacuum chamber profiles with reduced aperture. RF fingers are a key component to ensure good vacuum conditions and
Shane Tornifoglio Page 1 of 6. Weekly Report 6 2/29/10
Shane Tornifoglio Page 1 of 6 Week 1 Feb 22 nd March 1 st This meeting marks the first meeting in three weeks because of no meeting the week before spring break and then bring break itself. The first week
APPLIANCES /// MTA, CST-100 II AND SL-156 CONNECTORS. CONNECTORS/ APPLIANCES MTA, CST-100 II and SL-156 Connectors
PPLINCES /// MT, CST-100 II ND SL-156 CONNECTORS CONNECTORS/ PPLINCES MT, CST-100 II and SL-156 Connectors Contents Introduction This catalog has been designed to assist you, our customer, identify products
INSTALLATION INSTRUCTIONS
LIGHTGUARD 350-20-WTC SEALED FIBER OPTIC CLOSURE VIEW ONLINE TABLE OF CONTENTS: GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...3 PACKAGE CONTENTS: ACCESSORIES...3 RECOMMENDED TOOLS...3 ADD-ON COMPONENTS...4
Unmatched Product Range Material Availability Manufacturing Capabilities Innovative Applications and Engineering Expertise
Unmatched Product Range Material Availability Manufacturing Capabilities Innovative Applications and Engineering Expertise Your True Project Partner Conversion Table... 2 Steel Sheet Pile... 3 5 7 9 11
CS Height Adjustable Desks ELECTRIC HEIGHT ADJUSTABLE SIT-STAND DESKS // DESK FRAMES
CS Height Adjustable Desks ELECTRIC HEIGHT ADJUSTABLE SIT-STAND DESKS // DESK FRAMES 2 ERGONOMICS & YOUR HEALTH Every day more and more people are enjoying the many benefits of working while standing.
Cables, Flanges, Quick Locks, Spring-loaded Cables
Cables, Flanges, Quick Locks, Spring-loaded Cables Industrial X-Ray Overview Technology with Passion 2 Cables, Flanges, Quick Locks Technical Data Cables L3/75 U3/100 Rated voltage 75 kvdc 100 kvdc Nominal
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-500-1000 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL F CAUTION Working around
HES HACILAR ELEKTRİK SANAYİ VE TİC.A.Ş.
Technical Specification Revision/Date: 04/04.15 By N.KARAAĞAÇ Date : 27 February 2015 Cable Type HES Cable Product Number :, Outdoor F/O Cable :FOZZXXXSJSA41JYY (ZZ: fiber type G652=SD, G657 A1 = A1, G657
Specification for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D)
2-3, Marunouchi 2-chome, Chiyoda-ku, Tokyo 100-8322, Japan No. FB-KL4001C for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D) Aug 2014 1 1. General This specification describes
Interface Practices Subcommittee SCTE STANDARD SCTE Test Method for Drop Cable Center Conductor Bond to Dielectric
Interface Practices Subcommittee SCTE STANDARD SCTE 59 2018 Test Method for Drop Cable Center Conductor Bond to Dielectric NOTICE The Society of Cable Telecommunications Engineers (SCTE) / International
TFT-150R-G. Tape Shield Cable (page 2) Suggested Installation Equipment (not supplied with kit) Wire Shield Cable (page 7)
TFT-150R-G 5-15kV Cold Applied Indoor (5-8kV Indoor and Outdoor) Termination for Copper Tape, Wire Shield, Lead Sheath, and UniShield Cable Suggested Installation Equipment (not supplied with kit) Cable
How can you determine the amount of cardboard used to make a cereal box? List at least two different methods.
Activity Start Thinking! For use before Activity How can you determine the amount of cardboard used to make a cereal box? List at least two different methods. Activity Warm Up For use before Activity Evaluate
THE AMBER COMPUTER VDU PROJECT.
THE AMBER COMPUTER VDU PROJECT. H. Holden. April. 2019. BACKGROUND: Of the vintage small cathode ray tube VDU s or video monitors, the one that has impressed me the most, is the one manufactured by Zenith
Structural Plate Design Guide. 5 th Edition MULTI-PLATE. Aluminum Structural Plate. Aluminum Box Culvert SUPER-SPAN SUPER-PLATE.
ENGINEERED SOLUTIONS Structural Plate Design Guide 5 th Edition MULTI-PLATE Aluminum Structural Plate SUPER-SPAN SUPER-PLATE BridgeCor Table of Contents Steel and Aluminum Structural Plate design guide.
grows AND shrinks Using girth changes to set up a tube mill
56 By W.B. Bud Graham, Contributing Writer We always have some confusion at our house concerning desserts. My wife claims that I like only two kinds of pie: hot and cold. Well, she is mostly right. My
livello application guides
livello application guides T Y P I C A L S L I V E L L O HEIGHT-ADJUSTABLE BENCH T YPICALS......1 8 F R A M E S U N D E R S TA N D I N G H E I G H T- A D J U S TA B L E F R A M E S.....2 3 17 F R A M E
Amphenol Telecom Solutions
BNC 31 Series Bayonet Lock RF Connector System Materials Electrical Environmental Body/Finish /Nickel 50 ohm 75 ohm Temp. range -65 C thru 165 C Contact Frequency range 0-4GHz 0-10GHz Shock Consult Rep
Safe, Accurate, and Repeatable
Safe, Accurate, and Repeatable It is common for high-speed data cable to utilize two or more shielded twisted conductors. This type of cable is common in all digital electronic networks, and it requires
VIA 3 - PATTERNS PENDANT DIRECT W W W. L U M E N W E R X. C O M
DESCRIPTION At LumenWerx, we make it simple to design patterns customized for you. Whether surface, wall mount, pendant or recessed - or even a combination of different mounting types, we make it easy
Data Sheet. ASMT-UWB1-NX302 OneWhite Surface Mount PLCC-2 LED Indicator. Description. Features. Applications
ASMT-UWB1-NX302 OneWhite Surface Mount PLCC-2 LED Indicator Data Sheet Description This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance
B.2.CHRONO PLUS SIDE HUNG OPEN IN WINDOWS
B.2. SIDE HUNG OPEN IN Contents General characteristics................... page B.2.2 Base set n 20510...................... B.2.3 Centre locking set n 30500-850 + 30540-830............... B.2.4 Wedge
Description of Bolt Torque Tables
Maximum (preferred) torque required per bolt (foot pounds) to arrive at the maximum available / recommended gasket stress shown in the previous column. (4) Maximum gasket stress recommended or available
Automatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces
Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................
New Rotary Magnetron Magnet Bar Improves Target Utilization and Deposition Uniformity
Society of Vacuum Coaters 2013 Technical Conference Presentation New Rotary Magnetron Magnet Bar Improves Target Utilization and Deposition Uniformity John Madocks & Phong Ngo, General Plasma Inc., 546
Cold Shrink Silicone Rubber Termination QT-II
3 Cold Shrink Silicone Rubber Termination QT-II Instructions IEEE Std. No. 48-1990 Class 1 Termination 15 Class 110 kv BIL Kit Contents: 1 Hi-K Silicone Rubber Termination 2 Scotch Silicone Rubber Tape
DLH Packer. We Know Downhole. Special Features. To order, Call +61 (0) or visit Australian - Accredited - Committed
DLH Packer The D&L DLH Packer is a hydraulicset single-string retrievable packer and may be used in virtually any production application. Tubing pump pressure is used to set the packer and the setting
,
Page 39 Description Part Number List Price Section Three NuFlex Tubing Siphon Tubes Sprinkler Mainline Tubing Gated Accessories Vacuum PVC Underground Gates & Accessories 40 40 42, 46 43 4445 46 47 4849
MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors. NOT the LATEST REVISION
MP Economy Power (EP) Connectors NOT the LTEST REVISION Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for
Hot strip mill product dimensions Hot rolled Steel Strip
Data Sheet: A1.1 Hot strip mill product dimensions Hot rolled Steel Strip General description Hot rolled steel strip produced on the hot strip mill at ArcelorMittal South Africa is divided into six groups,
Data Sheet. ASMT-UWB1-NX302 OneWhite Surface Mount PLCC-2 LED Indicator. Description. Features. Applications
ASMT-UWB1-NX32 OneWhite Surface Mount PLCC-2 LED Indicator Data Sheet Description This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance
EDIS Circular Module Datasheet
EDIS Circular Module Datasheet Solid-State Lighting Series Features : Solid State Lighting Technology Superior Light Quality Reduce CO₂ Emission Energy Saving(5W/1W/12W) Ecologically Friendly Long Life-Time
3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS
3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS-350-1000 for Tape Shield, Wire Shield, UniShield, and Longitudinally Corrugated (LC) Cable Instructions IEEE Std. 404 35 kv Class 250 kv BIL F CAUTION
Bolt-A-Plate. We Support You.
Bolt-A-Plate www.ail.ca We Support You. AIL s Bolt-A-Plate product is used to form the outer rings of wind turbine bases. Helical Corrugated Steel Pipe is used for the inner rings of the bases. Our Commitment
PrimaLine 1.5 XT Wet Location LED Tape Light
PrimaLine 1.5 XT Wet Location LED Tape Light 0.55 in. wide Field cuttable every 4 in. PrimaLine 1.5 XT offers extended maximum run lengths of 40 feet with the same lumen output, CRI, and wattage as the
LENGTH LEAD WIRES LENGTH. Lead wires at one end. Lead wires at both ends. See length ordering guide. Standard is 0975(975mm)
TWO TONE WHITE LEDS DESCRIPTION Long Silicone Light Series two-tone white products offer a two-circuit system for varying white lighting. The durable and flexible lighting strands consistently illuminate
3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334
3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334 for 5/8 kv Non-Shielded and Shielded Cables (Ribbon, Wire and UniShield Cables) Instructions Cable Size Range: Feeder: #8 AWG 500 kcmil Motor Lead: #10
DDF-SE. Application example. Feed-through Stationary Rotary Feed-through. Max. speed 500 revs/ min. Air feed-through Up to 6x
DDF-SE www.comoso.com Sizes 080.. 120 Max. speed 500 revs/ min Air feed-through Up to 6x Electrical feed-throughs Up to 8x Application example Turning a component for laser welding or centrifugal drying
Modulate Magnetic Kit 10-01
Modulate Magnetic Kit 10-01 MOD-10-01-M MOD-10-01-M-OCE Modulate Fabric Banner kits feature unique angles and shapes, are portable and now are even easier to configure to achieve your dream space! Modulate
LED-Strip C12 MK2.6. Product Sheet
LED-Strip C12 MK2.6 Product Sheet schnick-schnack-systems Introduction features Generation 3 compatible Automatic Addressing System (Smart-Link) no addressing at the board Compatible with other series
FS3 Series Tri-Lens for SEOUL SEMICONDUCTOR Z-POWER P4 TM LEDs
FS3 Series Tri-Lens for SEOUL SEMICONDUCTOR Z-POWER P4 TM LEDs High efficiency 3 beams available MR-16 size tri-lens The FS3 tri-lens offers MR16 size lenses specifically designed for the Seoul Semiconductor
3.22 Finalize exact specifications of 3D printed parts.
3.22 Finalize exact specifications of 3D printed parts. This is the part that connect between the main tube and the phone holder, it needs to be able to - Fit into the main tube perfectly - This part need
LED-Strip C25 MK2.6. Product Sheet
LED-Strip C25 MK2.6 Product Sheet schnick-schnack-systems Introduction features Generation 3 compatible Automatic Addressing System (Smart Link) no addressing at the board Compatible with other series
Pipe & Tube Pittsburgh 2010 Technology for Profitable Production October 3 4, 2010 Olimpia80
Linear Cage Forming in Tube Mills Pipe & Tube Pittsburgh 2010 Technology for Profitable Production October 3 4, 2010 Olimpia80 Presenter: Peter Beierling Exclusive Agent for Olimpia80 in NAFTA www.olimpia80.com
Cold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std kv Class 250 kv BIL
Cold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std. 404 35 kv Class 250 kv BIL Kit Number 5798A-MT Cable Range Requirements Cable Insulation O.D.
Cables. Tonearm cables. Interconnect cables. Speaker cables
Cables Tonearm cables Interconnect cables Speaker cables Ortofon history Ortofon continuous development since 1918 In 1918, Axel Petersen and Arnold Poulsen founded the Electrical Phono Film Company. Their
WaveTrax. Fiber Cable Management System
Table of Contents Overview...3 Trough...4 Trough Cover...4 Trough Notching Tool...4 FastLock Coupler...4 Competitive FastLock Coupler...5 Horizontal Elbow...5 Horizontal Elbow Cover...5 Horizontal T...5
Tile saws - Masonry saws - Block saws
Tile saws - Masonry saws - Block saws www.goelz.de Tile saws NEW TS200/250 Professional tile cutting machines adjustable cutting length cutting head adjustable up to 45 (Jolly cutting) diamond blade Ø
FELIX3.1 assemblymanual
FELIX3.1 assemblymanual Assemblymanualfor: FELIX3.1Single FELIX3.1Dual copyrightinformation Thisdocumentcontainsproprietaryinformationthatisprotectedbycopyright. nopartofthisdocumentmaybephotocopied,reproduced,ortranslatedtoanotherlanguagewithoutthepriorwritenconsentoffelixroboticsbv.
TruePlate Structural Plate
TruePlate Structural Plate Galvanized Steel and Aluminum Alloy Sizes, Shapes and Height of Cover Tables TrueNorthSteel.com info@truenorthsteel.com 866-82-511 TruePlate Structural Plate Many drainage and
CM MTC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068-0050 319-556-7484 / Fax 319-556-1235 CM-2400-0MTC PARTS LIST ENGINE OIL GRADE: ENGINE OIL CAPACITY: PUMP OIL: PUMP OIL CAPACITY: NOZZLE SIZE: 30W 21 oz. MI-T-M #AW-4085-0016
DATE QTY MODEL NO. LED COLOR LED QTY. POWER BEAM ANGLE SIZE WEIGHT LWW/LFL-W150A-36P LWW/LFL-W150A-72P LWW/LFL-W150A-144P
PROJECT TYPE DATE QTY Outdoor Series LWW/LFL-W150A LWW/LFL-W150A-36P DESCRIPTION: The LWW/LFL-W150A LED Light Source is a multi-controllable and configurable wall washer for the architectural and commercial
Connecting cables NEBS, for sensors
Connecting cables NEBS, for sensors Connecting cables NEBS, for sensors Product range overview Function Version Type code Connection technology (Electrical connection 2) Connecting cable Cable characteristic
LENS Operating Experience
Available online at www.sciencedirect.com Physics Procedia 26 (2012 ) 161 167 Union of Compact Accelerator-driven Neutron Sources I & II LENS Operating Experience T. Rinckel *a, David V. Baxter a,b, J.
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-2-4/0
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-2-4/0 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL F CAUTION Working around energized
The Best is Better than Ever
Fast-Fold NXT Additionl sections can be added to increase height. Aspect ratio conversion kits available The Best is Better than Ever We listened to you. We talked to buyers, business owners, product managers,
J-Pro Cable Support System Let Panduit Support Your Cables
J-Pro Cable Support System Let Panduit Support Your Cables The J-Pro Cable Support System is designed to provide a competitive alternative to metal s for routing cables throughout the physical infrastructure.
The trigger for the New Electromagnetic Calorimeter NewCal
The trigger for the New Electromagnetic Calorimeter NewCal Feasibility studies (2d version) Charles F. Perdrisat June 21,2012 6/20/2012 1 Assumptions: HERA-B midsection shashlik detectors available, 2128
LED-Strip C50 MK2.6. Product Sheet
LED-Strip C50 MK2.6 Product Sheet schnick-schnack-systems Introduction features Generation 3 compatible Automatic Addressing System (Smart Link) no addressing at the board Compatible with other series
FNP3 Series Tri-Lens for Nichia NS6x083 and NS6x183 LEDs
FNP3 Series Tri-Lens for Nichia NS6x083 and NS6x183 LEDs High efficiency 4 beams available MR-16 size tri-lens The FNP3 tri-lens offers MR16 size lenses specifically designed for the Nichia 083/183 series
TSUBAKI SEAMLESS LIGHT TYPE V
WHITE LEDS DESCRIPTION Tsubaki Type V products provide highly flexible lighting strands for smooth and seamlessdirect view applications such as facade lightingand other architectural features. Rigid or
Agilent HSMx-C110/C170/C190/C191/C150 High Performance ChipLED Data Sheet
Agilent HSMx-C11/C17/C19/C191/C15 High Performance ChipLED Data Sheet HSMA-C11/C17/C19/C191/C15 HSML-C11/C17/C19/C191/C15 HSMC-C11/C17/C19/C191/C15 HSMZ-C11/C17/C19 Description These chip-type LEDs utilize
T6-PLAN CENTRALLY CONNECTED RADIATOR
48 Technical data T6-PLAN CENTRALLY CONNECTED RADIATOR Technology Connections 4 x internal thread G 1/2 and 2 x external thread G 3/4 bottom centre 13 bar Test positive pressure 13 bar 10 bar max. Max.
NEPTUNE PROJECTION SCREEN PRO-LINE MANUAL SCREEN NEPTUNE PRO-LINE MNAUAL SCREEN SPRING ROLL LOCKING SYSTEM DEFINITE ASPECT UNIQUE APPEARANCE DURABLE
NEPTUNE PRO-LINE MANUAL SCREEN QS Neptune pro-line manual screen combines comfortable viewing and simplicity in use. It satisfies the most exacting viewers with clear black border for definite aspect.
height-adjustable bench price & application guide
height-adjustable bench price & application guide 09.25.2017 table of contents I N T RO D U C T I O N.................................... 3 L I V E L L O H E I G H T- A D J U S TA B L E B E N C H A P
Formulate Designer Series 20 Backwall - Kit 07
Formulate Designer Series 20 Backwall - Kit 07 FMLT-DS-20-07 Formulate TM Designer Series 20ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
Small Circular Connector. JN1/JN2 Series. Dust Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series Angle Plug CONNECTOR MB-0054-8 October 2009 [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
3M Cold Shrink QS4 Integrated Splice Kit QS4-15SP-2-4/0
3M Cold Shrink QS4 Integrated Splice Kit QS4-15SP-2-4/0 for Jacketed Concentric Neutral (JCN), Flat Strap, Tape Shield and Longitudinally Corrugated (LC) Cable Instructions IEEE Std. 404 15 kv Class 150
Instructions. Cable with Armor F CAUTION. October Rev A
3M Single Conductor Accessory Breakout Kits (BOK's) for use with 3M Cable Accessories (Terminations, T-Bodies and Push-On Elbows) For Use With Single Conductor Accessories On Three-Core Conductor Cables
Cree PLCC2 1-in-1 SMD LED CLM1B-RKW/AKW
Cree PLCC2 1-in-1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1084.002 PRODUCT DESCRIPTION SMD LEDs is packaged in the industry standard package. These LEDs have high reliability performance and are designed
ADVANCED CABLE TIES, INC.
ADVANCED CABLE TIES, INC. Advanced Engineering + Advanced Processing = Advanced Cable s, U, CSA, Approved, OHS Compliant Products ISO 9001:2015 egistered Quality System sonal Customer Service epresentative
Cree PLCC2 1-in-1 SMD LED CLM1B-BKW/GKW
PRODUCT FAMILY DATA SHEET CLD-CT994.001 Cree PLCC2 1-in-1 SMD LED PRODUCT DESCRIPTION SMD LEDs is packaged in the industry standard package. These LEDs have high reliability performance and are designed
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated Height Comparison (With E.FL series) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
VITALink Taped Splice Straight Through Crimp
A Marmon Wire & Cable Berkshire Hathaway Company VITALink Taped Splice Straight Through Crimp 2 Hour Fire-Rated Splice VITALink MC Cables, UL FHIT 120 Installation Instructions Description The VITALink
GS-HYDRO END FORMING MACHINES
GS-HYDRO END FORMING MACHINES Main index Reshaping machine... 4 Pre-assembly machines... 5 Deburring machines... 6 Tube cutting machines... 7 Cleaning system... 8 3 Reshaping machine M-WF 385Xplus Walform
LED Pro Wash SRL Specifications. DMX Channels
LED Pro Wash SRL-6349 Architectural, stage, commercial, club, this professional wash covers all the applications where smooth, rich color wash is required. The LED Pro Wash incorporates all of the functionality
WP36BHD T-1 (3mm) Blinking LED Lamp
T-1 (3mm) Blinking LED Lamp DESCRIPTIONS The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL CAUTION Working around energized
3M Cold Shrink Splice Kit QS-III 5416A
3M Cold Shrink Splice Kit QS-III 5416A for Jacketed Concentric Neutral (JCN) and Concentric Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL CAUTION Working around energized systems may
InnovatIon Wood WorkIng 2014 En
Innovation Wood working 2014 EN 2 CTDIA02 SELF-SHARPENING SAW TIP CTDIA02 SELF-SHARPENING SAW TIP CTDIA02 SELF-SHARPENING SAW TIP 3 The exhibition highlight: CTDIA02 CERATIZIT is presenting the new saw
The Two Assemblies. Standard Assembly For signs up to 11" wide. Pull flexible lens directly outward with Sucton Cup Tool for lens removal
System Overview The Two Assemblies The Arris system is comprised of two unique assemblies, each designed to provide maximum cost effectiveness and design flexibility for specific types of signs. With both
Support Frame STB Assembly and Operating Instructions
Support Frame STB Assembly and Operating Instructions Fig. 2.1 Support frame STB 450 Fig. 2.2 Support frame STB 300 Fig. 2.3 Brace bracket SK 150 Product features The support frames are mainly used for
Section 8 FIBERLIGN Hardware for Aerial FTTP Applications
Section FIBERLIGN Hardware for Aerial FTTP Applications Table of Contents Page FIBERLIGN Products for ADSS Applications FIBERLIGN ADSS Drop Cable Dead-end...-2 FIBERLIGN Midspan Drop...-5 FIBERLIGN LITE
Foxview Circle SANDY SPRING BUILDERS TECHNICAL GUIDE B CASEMENT WINDOWS
B3 Foxview Circle SANDY SPRING BUILDERS TECHNICAL GUIDE B CASEMENT WINDOWS PRODUCT FEATURES SPECIFICATIONS STYLES GLAZING STANDARDS METAL CLADDING Traditional, Mission, French, Push Out models. Quarter
Data Sheet. HSMx-C110/C170/C190/C191/C150 High Performance ChipLED
HSMx-C11/C17/C19/C191/C15 High Performance ChipLED Data Sheet HSMA-C11/C17/C19/C191/C15 HSML-C11/C17/C19/C191/C15 HSMC-C11/C17/C19/C191/C15 HSMZ-C11/C17/C19 Description These chip-type LEDs utilize Aluminum
Spec No.: ZTT Revision: 2 Date: Oct 3, Designer. Senior Technical Manager. Approver. Chief Technical Engineer
Spec No.: ZTT 45012 Revision: 2 Date: Oct 3, 2014 TECHNICAL SPECIFICATION Optical Fiber Cable (Reference: NBR 14566) Designer Senior Technical Manager Approver Chief Technical Engineer Jiangsu Zhongtian
velocity standard 08 velocity features and benefits: dimensions:
velocity standard 08 V-S-08 Chic and robust - a highly-structural portable 10 x20 exhibit that emphasizes your identity and message seamlessly with a combinaton of fabric graphics, rigid accents and accessories.
Up to 85% higher Service Life due to efficient sealing method.
Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348
TOP10 2 RELIABLE REASONS TO CHOOSE BLUEVIEW LED ONE OF THE 1ST MOVERS FOR LED TAPE LIGHT HIGH STANDARD WIDE COLOR TEMPERATURE OPTION IN ONLY ONE BIN
TOP10 REASONS TO CHOOSE BLUEVIEW LED 1 ONE OF THE 1ST MOVERS FOR LED TAPE LIGHT Started in 2004, 830 employees Self-owned 24,000 of offices, workshops,dormitory, entertainment area Monthly production capacity:
Mechanical Considerations in the Outer Tracker and VXD. Bill Cooper Fermilab
Mechanical Considerations in the Outer Tracker and VXD Fermilab August 23, 2005 1 Overview I ll describe developments since the SLAC workshop in mechanical design efforts at Fermilab related to SiD tracking.
Setup Guide. Read me BefoRe unpacking!
Setup Guide Read me BefoRe unpacking! Package Contents In The Replicator package The Replicator SD card (in The Replicator SD card slot) In the Accessory Box found within The Replicator frame Single or
HARTING Ethernet cabling cables and connectors, 4 wire
Industrial Cat. 5e Standard cable, 4-wire Type A for permanent installation or to build-up PROFINET system cables PVC X 8 wire X Cat. 5e X Cat. 6 Cat. 6 A Cat. 7 Cable structure Core structure Wire insulation
RAIL D-SUB BACKSHELLS
RAIL D-SUB BACKSHELLS FOR D-SUBMINIATURE CONNECTORS D-SUB BACK SHELLS /// DATA SHEET RAIL D-SUB BACKSHELLS FOR D-SUBMINIATURE CONNECTORS TE Connectivity (TE) provide a comprehensive range of ruggedized
03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through
Feed-through Feed-through FEED-THROUGH Series Size Page Rotary Feed-through for Robots DDF 202 DDF 031 206 DDF 040 208 DDF 040-1 210 DDF 050 212 DDF 050-1 214 DDF 063 216 DDF 080 218 DDF 080-1 220 DDF