RF1193A SP10T ANTENNA SWITCH MODULE - QUADBAND GSM, QUADBAND UMTS

Transcription

1 RF3A SP0T ANTENNA SWITCH MODULE - QUADBAND GSM, QUADBAND UMTS Package Style: QFN, 26-pin, 3.0mm x 3.mm x 0.5mm GSM Rx Features Very Low Loss Best in Class Harmonic Attenuation with Integated LPF: ETSI Compliance Exceptional Linearity Performance Lowest BOM Cost and Small Solution Symmetrical GSM Rx Ports Allow Ultimate Flexibility for Use With Any Transceiver Symmetrical UMTS Ports Allow Versatility for Use With Any Transceiver SPT and SPT Operation with No Loss in Performance GPIO Interface and Compatible with.v Logic (VCTL-High Min =.3V) Small Footprint, 3.0mm x 3.mm, 26-Pin QFN Applications Cellular Handset Applications Multi-Mode GSM, EDGE, WCDMA Applications GSM/GPRS/EDGE Switch Applications Cellular Infrastructure Applications GSM Rx2 GSM Rx3 GSM Rx UMTS UMTS2 UMTS3 UMTS/GND GSM 50/00 GSM 00/00 Product Description Ordering Information Functional Block Diagram Charge Pump/ Decoder A B C D VDD The RF3A is a single-pole ten-throw (SP0T) Antenna Switch Module. Very Low insertion loss along with excellent linearity performance achieved by RF3A makes it ideal for multi-mode GSM, EDGE, and UMTS handset applications. This module builds upon RFMD s phemt Switch technology and integrates low pass filtering on the GSM transmit paths thus avoiding the need for external harmonic attenuation. This module also integrates a decoder and is compatible with +.V control logic. RF3A is packaged in a compact 3.0mm x 3.mm x 0.5mm, 26-pin, QFN package which allows for a small solution size and lowest BOM cost as it does not require external DC blocking capacitors when external DC voltages are not applied to device ports. RF3ASP0T Antenna Switch Module - Quadband GSM, Quadband UMTS RF3APCBA-0 SP0T Antenna Switch Module - Quadband GSM, Quadband UMTS Fully Assembled Evaluation Board Optimum Technology Matching Applied GaAs HBT SiGe BiCMOS GaAs phemt GaN HEMT GaAs MESFET Si BiCMOS Si CMOS BiFET HBT InGaP HBT SiGe HBT Si BJT LDMOS RF MICRO DEVICES, RFMD, Optimum Technology Matching, Enabling Wireless Connectivity, PowerStar, POLARIS TOTAL RADIO and UltimateBlue are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. 2006, RF Micro Devices, Inc. DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. of 23

2 RF3A Absolute Maximum Ratings Parameter Rating Unit VDD, CTLA, CTLB, CTLC, CTLD 6.0 V Maximum Input Power TX +36, 2.5% (T AMB = 25 C) dbm TRX, T, T, TRX +32 (T AMB = 25 C) dbm TX2 +3, 2.5% (T AMB = 25 C) dbm RX,,, RX +3 (T AMB = 25 C) dbm Operating Temperature -30 to +0 C Storage Temperature -65 to +50 C Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. RFMD Green: RoHS compliant per EU Directive 2002/5/EC, halogen free per IEC , < 000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Parameter Specification Min. Typ. Max. Unit Condition Nominal conditions unless otherwise stated. V DD = 2.65V, V HIGH /V LOW =.V/0V, Temp = 25 C, 50 Compliant with ETSI multi-slot profile 2. GSM50/00 Transmit Frequency Range (GSM50) MHz Frequency Range (GSM00) MHz Loss TX - ANT db P IN = 35dBm, 2.5% DC, 2MHz to MHz, 0MHz to 5MHz Attenuation TX - ANT, 2f db P IN = 0dBm; Freq = 6MHz to 30MHz TX - ANT, 3f db P IN = 0dBm; Freq = 22MHz to 25MHz TX - ANT, f db P IN = 0dBm; Freq = 326MHz to 3660MHz TX - ANT, 5f0 up to 2 db P IN = 0dBm; Freq = 20MHz to 250MHz 2.5GHz TX - RX 35 db TX = 2MHz to MHz, 0MHz to TX - 35 db 5MHz TX - 35 db TX - RX 35 db TX - TRX 35 0 db TX - T 35 0 db TX - T 35 2 db TX - TRX 35 db TX - TX db TX = 2MHz to MHz, 6MHz to 30MHz TX2 - ANT 25 3 db TX2 = 0MHz to 0MHz 2 of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

3 RF3A Parameter Specification Min. Typ. Max. Unit Condition GSM50/00 Transmit (continued) Harmonics TX - ANT, 2f dbc P IN = 35dBm, 2.5%DC TX- ANT, 3f dbc TX - ANT, f 0-2.5GHz 0 5 dbc VSWR. GSM00/00 Transmit Frequency Range (GSM00) MHz Frequency Range (GSM00) MHz Loss TX2 - ANT.0.50 db P IN = 33dBm, 2.5% DC, 0MHz to 5MHz, 50MHz to 0MHz Attenuation TX2 - ANT, 2f db P IN = 0dBm; Freq = 320MHz to 320MHz TX2 - ANT, 3f db P IN = 0dBm; Freq = 530MHz to 530MHz TX2 - ANT, f 0 up to 2.5GHz 20 2 db P IN = 0dBm; Freq = 60MHz to 250MHz TX2 - RX db TX2 = 0MHz to 5MHz, 50MHz to TX db 0MHz TX db TX2 - RX 30 3 db TX2 - TRX 2 3 db TX2 - T 2 3 db TX2 - T 2 3 db TX2 - TRX db TX2 - TX 36 6 db TX - ANT 30 3 db TX = 2MHz to 5MHz Harmonics TX2 - ANT, 2f dbc P IN = 33dBm, 2.5%DC TX2- ANT, 3f dbc TX2 - ANT, up to 2.5GHz 6 5 dbc VSWR. DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. 3 of 23

4 RF3A Parameter GSM RX,,, RX Specification Min. Typ. Max. Unit Condition Frequency Range 6 60 MHz Frequency Range 05 0 MHz Loss RX,,, RX db 6MHz to 60MHz..50 db 05MHz to 0MHz VSWR (ANT and RX).6 UMTS, 2, 3, - Low Band Frequency Range 2 60 MHz Loss UMTS - ANT db UMTS 2 - ANT db UMTS 3 - ANT db UMTS - ANT db TRX - RX 25 2 db 2MHz to 5MHz TRX db TRX db TRX - RX 3 db T - RX,,, RX 0 6 db 25MHz to 5MHz T - RX,,, RX 30 3 db TRX - RX,,, RX 30 3 db TRX - TX 35 0 db TRX - TX2 2 3 db TRX - T, T, TRX 25 3 db T - TX 35 3 db T - TX db T - TRX, T, TRX 30 3 db T - TX 35 3 db T - TX db T - TRX, T 2 3 db T - TRX 23 sb TRX - TX 35 0 db TRX - TX2 35 db TRX - TRX, T, T 2 36 db Harmonics UMTS, 2, 3, - ANT, 2f dbc P IN = 26dBm, CW UMTS, 2, 3, - ANT, 3f 0 62 dbc UMTS, 2, 3, - ANT, up to 2.5GHz dbc of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

5 RF3A Parameter Specification Min. Typ. Max. Unit Condition UMTS, 2, 3, - Low Band (continued) IMD2 TRX - ANT dbm Tone : 36.5MHz at 20dBm Tone 2: 5MHz at -5dBm Receive Freq:.5MHz dbm Tone : 36.5MHz at 20dBm Tone 2: MHz at -5dBm Receive Freq:.5MHz T - ANT dbm Tone : 36.5MHz at 20dBm Tone 2: 5MHz at -5dBm Receive Freq:.5MHz dbm Tone : 36.5MHz at 20dBm Tone 2: MHz at -5dBm Receive Freq:.5MHz T - ANT dbm Tone : 36.5MHz at 20dBm Tone 2: 5MHz at -5dBm Receive Freq:.5MHz dbm Tone : 36.5MHz at 20dBm Tone 2: MHz at -5dBm Receive Freq:.5MHz TRX - ANT dbm Tone : 36.5MHz at 20dBm Tone 2: 5MHz at -5dBm Receive Freq:.5MHz dbm Tone : 36.5MHz at 20dBm Tone 2: MHz at -5dBm Receive Freq:.5MHz IMD3 TRX - ANT dbm Tone : 36.5MHz at 20dBm Tone 2:.5MHz at -5dBm Receive Freq:.5MHz dbm Tone : 36.5MHz at 20dBm Tone 2: 255.5MHz at -5dBm Receive Freq:.5MHz T - ANT dbm Tone : 36.5MHz at 20dBm Tone 2:.5MHz at -5dBm Receive Freq:.5MHz dbm Tone : 36.5MHz at 20dBm Tone 2: 255.5MHz at -5dBm Receive Freq:.5MHz T - ANT dbm Tone : 36.5MHz at 20dBm Tone 2:.5MHz at -5dBm Receive Freq:.5MHz dbm Tone : 36.5MHz at 20dBm Tone 2: 255.5MHz at -5dBm Receive Freq:.5MHz TRX - ANT dbm Tone : 36.5MHz at 20dBm Tone 2:.5MHz at -5dBm Receive Freq:.5MHz dbm Tone : 36.5MHz at 20dBm Tone 2: 255.5MHz at -5dBm Receive Freq:.5MHz VSWR. DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. 5 of 23

6 RF3A Parameter Specification Min. Typ. Max. Unit Condition UMTS, 2, 3, - High Band Frequency Range 0 0 MHz Frequency Range 0 20 MHz Loss UMTS - ANT db P IN = 26dB, CW, 0MHz to 0MHz UMTS 2 - ANT db UMTS 3 - ANT db UMTS - ANT db UMTS - ANT db P IN = 26dB, CW, 0MHz to 0MHz UMTS 2 - ANT db UMTS 3 - ANT db UMTS - ANT db UMTS - ANT db P IN = 26dB, CW, 20MHz to 20MHz UMTS 2 - ANT db UMTS 3 - ANT db UMTS - ANT db TRX - RX 22 db 0MHz to 0MHz, 0MHz to 0MHz TRX db TRX db TRX - RX 35 3 db T - RX,,, RX db T - RX,,, RX db TRX - RX,,, RX db TRX - TX db TRX - TX2 2 2 db TRX - T, T, TRX 2 3 db T - TX 50 5 db T - TX db T - TRX, T, TRX db T - TX 50 5 db T - TX2 2 3 db T - TRX, T 2 30 db T - TRX db 0MHz to 0MHz 6 of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

7 RF3A Parameter Specification Min. Typ. Max. Unit Condition UMTS, 2, 3, - High Band (continued) (continued) TRX - TX 50 5 db 0MHz to 0MHz, 0MHz to 0MHz TRX - TX db TRX - TRX, T 25 3 db 0MHz to 0MHz TRX - T 2 db TRX - TRX 2 30 db 0MHz to 0MHz TRX - T 2 30 db TRX - T 2 db Harmonics UMTS, 2, 3, - ANT, 2f0 62 dbc P IN = 26dBm, CW UMTS, 2, 3, - ANT, 3f0 62 dbc UMTS, 2, 3, - ANT, up to dbc 2.5GHz IMD2 TRX - ANT dbm Tone : 0MHz at 20dBm Tone 2: 0MHz at -5dBm Receive Freq: 60MHz dbm Tone : 0MHz at 20dBm Tone 2: 30MHz at -5dBm Receive Freq: 60MHz dbm Tone : 50MHz at 20dBm Tone 2: 0MHz at -5dBm Receive Freq: 20MHz dbm Tone : 50MHz at 20dBm Tone 2: 00MHz at -5dBm Receive Freq: 20MHz T - ANT dbm Tone : 0MHz at 20dBm Tone 2: 0MHz at -5dBm Receive Freq: 60MHz dbm Tone : 0MHz at 20dBm Tone 2: 30MHz at -5dBm Receive Freq: 60MHz dbm Tone : 50MHz at 20dBm Tone 2: 0MHz at -5dBm Receive Freq: 20MHz dbm Tone : 50MHz at 20dBm Tone 2: 00MHz at -5dBm Receive Freq: 20MHz T - ANT dbm Tone : 0MHz at 20dBm Tone 2: 0MHz at -5dBm Receive Freq: 60MHz dbm Tone : 0MHz at 20dBm Tone 2: 30MHz at -5dBm Receive Freq: 60MHz dbm Tone : 50MHz at 20dBm Tone 2: 0MHz at -5dBm Receive Freq: 20MHz dbm Tone : 50MHz at 20dBm Tone 2: 00MHz at -5dBm Receive Freq: 20MHz DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. of 23

8 RF3A Parameter Specification Min. Typ. Max. Unit Condition UMTS, 2, 3, - High Band (continued) IMD2 (continued) TRX - ANT dbm Tone : 0MHz at 20dBm Tone 2: 0MHz at -5dBm Receive Freq: 60MHz dbm Tone : 0MHz at 20dBm Tone 2: 30MHz at -5dBm Receive Freq: 60MHz dbm Tone : 50MHz at 20dBm Tone 2: 0MHz at -5dBm Receive Freq: 20MHz dbm Tone : 50MHz at 20dBm Tone 2: 00MHz at -5dBm Receive Freq: 20MHz IMD3 TRX - ANT dbm Tone : 0MHz at 20dBm Tone 2: 00MHz at -5dBm Receive Freq: 60MHz dbm Tone : 0MHz at 20dBm Tone 2: 520MHz at -5dBm Receive Freq: 60MHz dbm Tone : 50MHz at 20dBm Tone 2: 60MHz at -5dBm Receive Freq: 20MHz dbm Tone : 50MHz at 20dBm Tone 2: 600MHz at -5dBm Receive Freq: 20MHz T - ANT dbm Tone : 0MHz at 20dBm Tone 2: 00MHz at -5dBm Receive Freq: 60MHz dbm Tone : 0MHz at 20dBm Tone 2: 520MHz at -5dBm Receive Freq: 60MHz dbm Tone : 50MHz at 20dBm Tone 2: 60MHz at -5dBm Receive Freq: 20MHz dbm Tone : 50MHz at 20dBm Tone 2: 600MHz at -5dBm Receive Freq: 20MHz T - ANT dbm Tone : 0MHz at 20dBm Tone 2: 00MHz at -5dBm Receive Freq: 60MHz dbm Tone : 0MHz at 20dBm Tone 2: 520MHz at -5dBm Receive Freq: 60MHz dbm Tone : 50MHz at 20dBm Tone 2: 60MHz at -5dBm Receive Freq: 20MHz dbm Tone : 50MHz at 20dBm Tone 2: 600MHz at -5dBm Receive Freq: 20MHz of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

9 RF3A Parameter Specification Min. Typ. Max. Unit Condition UMTS, 2, 3, - High Band (continued) IMD3 (continued) TRX - ANT dbm Tone : 0MHz at 20dBm Tone 2: 00MHz at -5dBm Receive Freq: 60MHz dbm Tone : 0MHz at 20dBm Tone 2: 520MHz at -5dBm Receive Freq: 60MHz dbm Tone : 50MHz at 20dBm Tone 2: 60MHz at -5dBm Receive Freq: 20MHz dbm Tone : 50MHz at 20dBm Tone 2: 600MHz at -5dBm Receive Freq: 20MHz VSWR.5 Triple Beat Ratio (TBR) TRX Triple Beat Ratio BC0 (GSM00) dbc BC (PCS) 2 dbc BC dbc BC5 (GSM00) dbc BC (PCS) 2 dbc BC5 (AWS) 5 dbc T Triple Beat Ratio BC0 (GSM00) 2 dbc BC (PCS) 2 dbc BC 2 dbc BC5 (GSM00) 5 dbc BC (PCS) 2 dbc BC5 (AWS) 3 dbc T Triple Beat Ratio BC0 (GSM00) 2 dbc BC (PCS) 2 dbc BC 2 dbc BC5 (GSM00) dbc BC (PCS) 2 dbc BC5 (AWS) dbc TRX Triple Beat Ratio BC0 (GSM00) 2 dbc BC (PCS) 2 dbc BC 2 dbc BC5 (GSM00) 5 dbc BC (PCS) 2 dbc BC5 (AWS) 2 dbc DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. of 23

10 RF3A Parameter Specification Min. Typ. Max. DC Control and Electrical Specifications V DD - Switch Supply Voltage V Unit Condition V DD Supply Current ma Active Mode VC, VC2, VC3, VC - Control V Voltage - VHIGH VC, VC2, VC3, VC - Control V Voltage - VLOW Control Current.5 ua Switching Speed 2 5 us 0% OFF to 0% ON, 0% ON to 0% OFF 0 of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

11 RF3A Pin Names and Description Pin Name Description GND Ground. 2 T WCDMA RF Input/Output Port 2. 3 GND Ground. T WCDMA RF Input/Output Port 3. 5 TRX/GND WCDMA RF Input/Output Port (Ground for SPT operation). 6 GND Ground. ANT Connected to Antenna GND Ground. GND Ground. 0 TX2 GSM 00/00 RF Transmit Input. GND Ground. 2 GND Ground. 3 TX GSM 00/00 RF Transmit Input GND Ground. 5 GND Ground. 6 RX GSM RF Output Port. GSM RF Output Port 3. GSM RF Output Port 2. RX GSM RF Output Port. 20 TRX WCDMA RF Input/Output Port. 2 GND Ground. 22 VDD Decoder and Charge Pump supply voltage (2.65 typical). 23 CTLD RF Path control D (See Switch Control table). 2 CTLC RF Path control C (See Switch Control table). 25 CTLB RF Path control B (See Switch Control table). 26 CTLA RF Path control A (See Switch Control table). Pkg Base GND DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. of 23

12 RF3A Pin Out GND 2 TRx GND TRx3 TRx/GND 3 5 Top View 3.0mm x 3.mm x 0.5mm GND 6 6 ANT 5 GND GND TX2 GND GND TX CTLA CTLB CTLC CTLD VDD GND TRx RX RX GND GND Note: Pin 5 SPT: Connect directly to GND SP0T: TRx Package Drawing 2 of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

13 RF3A DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or 3 of 23

14 RF3A General Information Control Logic The SP0T switch is controlled by CTLA, CTLB, CTLC, and CTLD. GSM+ UMTS Switch Path CTLA CTLB CTLC CTLD TX-ANT 0 0 TX2-ANT RX-ANT* ANT* ANT* 0 0 RX-ANT* TRX-ANT 0 0 T-ANT 0 T-ANT 0 TRX-ANT *-RX,, and RX are symmetric and can be used interchangeably for GSM low-band and high-band. Note: In SPT mode, TRX can be used by terminating any other unused port to Ground. of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

15 RF3A VDD Evaluation Board Schematic C2 0 nf CTL_D C3 00 pf CTL_C C 00 pf CTL_B C5 00 pf CTL_D CTL_B VDD CTL_C CTL_A CTL_A C6 00 pf P HDR_2x3_RA J T 2 20 J TRX J2 T J3 TRX J0 RX J J J ANT C 00 pf L 56 nh 5 J RX J5 TX2 J6 TX Application Environment The switch can be placed directly under, or in close vicinity to, the antenna. Shielding cans covering the switch are not required, and they can be in close vicinity to the PA. The switch can be mounted on a flexible PWB. Application Diagram and Guidelines Decoupling capacitors on the control pins protect the control circuitry from possible RF leakage. A 00pF decoupling capacitor is recommended on the V DD line. The value of L will depend on the Contact Discharge rating which needs to be achieved for the application. In SPT mode, TRX can be used by terminating any other unused port to Ground. Electrical Test Methods The electrical parameters for the switch are measured on test PWB provided by RFMD. The test PWB includes means for decoupling RF signals from control signal port (shunt capacitor at control signal ports). All measurements are done with calibration plane at switch pins. The effect of test board losses and phase delay are removed from the results by calibrating using the calibration board. DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. 5 of 23

16 RF3A Evaluation Board Layout Board Size. Diameter Board Thickness 0.062, Board Material FR- and Rogers R of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

17 RF3A Layout Guidlines In order to get the best out of band attenuation as specified in the data sheet, layout guidelines should be followed as shown in the highlighted boxes. DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or of 23

18 RF3A Theory of Operation Product Description The RF3A is a SP0T Switch Filter Module (SFM) with fully integrated dual Low Pass Filters on GSM Transmit paths and an integrated decoder/charge-pump. This simplifies the phone design by eliminating the need for discrete harmonic filters, switches and possible matching components. The GSM RX ports of this module have symmetrical performance and hence the Rx branches can be used interchangeably from 6MHz to 0MHz which allows for ultimate user flexibility. Integrated filtering provides ETSI compliant harmonic suppression at the antenna port even under mismatch conditions, which is important as modern antennas today often present a load that significantly deviates from nominal impedance. This module also features an integrated charge-pump/decoder which allows for excellent linearity performance even at.v control voltage. The decoder allows the switch to be controlled in any of the specified ten states as defined by the control logic on page using general-purpose I/O control lines. Typical Performance Data on Evaluation Board: Fixture losses have been de-embedded (Temp = 25 C, V DD = 2.5V, V CONTROL High =.V, V CONTROL Low = 0V) Loss: GSM Low Band Tx 0.0 Loss: GSM Low Band Tx (Broad band) Loss Loss Loss: GSM High Band Tx Loss: GSM High Band Tx (Broad band) Loss Loss of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

19 RF3A Typical Performance Data on Evaluation Board: Fixture losses have been de-embedded (Temp = 25 C, V DD = 2.5V, V CONTROL High =.V, V CONTROL Low = 0V) Loss: TRX (Low Band) Loss: TRX (High Band) Loss Loss Loss: T (Low Band) -0.3 Loss: T (High Band) Loss Loss Loss: T (Low Band) -0.3 Loss: T (High Band) Loss Loss DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. of 23

20 RF3A Typical Performance Data on Evaluation Board: Fixture losses have been de-embedded (Temp = 25 C, V DD = 2.5V, V CONTROL High =.V, V CONTROL Low = 0V) Loss: TRX (Low Band) Loss: TRX (High Band) Loss Loss Loss: RX, 2, 3, (Low Band) -0. Loss: RX, 2, 3, (High Band) Loss Loss of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

21 RF3A GSM LB TX to TRX, T, T, TRX (2 60MHz) GSM LB TX to RX,,, RX (2 60MHz) TRX T T TRX RX RX TRX to T, T, TRX (2 60MHz) T to TRX, T, TRX (2 60MHz) T T TRX TRX T TRX Frequency T to TRX, T, TRX (2 60MHz) TRX to TRX, T, T (2 60MHz) TRX T TRX TRX T T TRX to RX,,, RX (2 60MHz) T to RX,,, RX (2 60MHz) RX RX RX RX DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. 2 of 23

22 RF3A T to RX,,, RX (2 60MHz) TRX to RX,,, RX (2 60MHz) RX RX RX RX GSM HB TX to TRX, T, T, TRX (0 0MHz) GSM HB TX to RX,,, RX (0 0MHz) TRX T T TRX RX RX TRX to T, T, TRX (0 0MHz) T T TRX T to TRX, T, TRX (0 0MHz) TRX T TRX Frequency T to TRX, T, TRX (0 0MHz) TRX to TRX, T, T (0 0MHz) TRX T TRX TRX T T TRX to RX,,, RX (0 0MHz) T to RX,,, RX (0 0MHz) RX RX RX RX 22 of Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. DS0

23 RF3A T to RX,,, RX (0 0MHz) TRX to RX,,, RX (0 0MHz) RX RX RX RX TRX to T, T, TRX (0 0MHz) T to TRX, T, TRX (0 0MHz) T T TRX TRX T TRX T to TRX, T, TRX (0 0MHz) TRX to TRX, T, T (0 0MHz) TRX T TRX TRX T T TRX to RX,,, RX (0 0MHz) T to RX,,, RX (0 0MHz) RX RX RX RX T to RX,,, RX (0 0MHz) TRX to RX,,, RX (0 0MHz) RX RX RX RX DS0 62 Thorndike Road, Greensboro, NC 20-2 For sales or technical support, contact RFMD at (+) or customerservice@rfmd.com. 23 of 23