Basic Specifications. Driver Model SD12B/15B SD20B SD30B SD30C SD40C SD50C SD75C
|
|
- Alban Booth
- 5 years ago
- Views:
Transcription
1
2
3
4 Basic Specifications Driver Model SD12B/15B SD20B SD30B SD30C SD40C SD50C SD75C Applicable Motor Maximum Current 8.4A 11.4A 17.0A 17.0A 22.8A 28.2A 42.3A Input Power Feedback System single-phase AC180V ~ 240 V, 50/60 Hz Encoder, Resolver 3-phase AC180V ~ 240 V, 50/60 Hz Environment Temperature Humidity Vibration Operating : 0 ~ 40 C, Storage : -20 ~ 80 C Both operating and storage : 85% RH or less 0.5 G or less Contorl Mode Position / Speed / Torque Position Control Mode Speed Control Mode Command Type Max. Input Pulse Frequency Electronic Gear Ratio Smoothing Time In position Command Input Internal Speed Command Accelerate/Decelerate Setting Time Zero Speed Specified Speed Arrival Servo Lock Torque Speed A/B Phase, CW/CCW, + Pulse/Direction 500kpps 1/127 A/B 127 (A&B:1~10000) 0 ~ 10000ms 0~32767 Pulses 0 ~ ±10V (Viewing from output shaft end, +v for CCW rotation.) 3 Speeds with parameter setup 10ms~10000ms, Enable / Disable with parameter setup 0~255rpm 0 ~ rated speed with parameter setup Enable / Disable with parameter setup 0 ~ 300% rated torque Command Input 0 ~ ±10V Torque Control Mode Jog Command Smoothing Time Analog Command Speed Limit Internal Setup 0 ~ 10000ms 0 ~ 10V (rated speed) 0 ~ rated speed with parameter setup Operated through control panel Alarm Signal Over Travel Analog Monitor Signal Encoder Output Encoder Driving Ratio Control Panel Digital Input Ports Others Digital Output Ports Communication Ports 10 sets of record Disable / holding power input when over travel Speed & Torque(Current), 2 outputs A,B,Z Phase line driver 1/N:N=1~16 或 1~N, N = feedback system resolution 5-digits LED display 4 buttons Servo On, Alarm Reset, CW/CCW Prohibition, Control Mode Switching, Pulse Inhibition Emergency Stop, External Torque Limitation Servo Ready, Alarm, In Position, Speed Arrival, Zero Speed, Encoder Signals Parameter setting, operating status monitoring
5
6
7
8
9 Basic Specifications Driver Model SDP12/15 SDP20 SDP30 SDP40 Applicable Motor Maximum Current Applicable Motor Rated Current 8.5A 11.4A 17.0A 22.8A 2.8A 3.8A 5.7A 7.6A Applicable Motor Power 120W~300W 400W~750W 750W~1kW 1kW~1.5kW Input Power single-phase AC180V ~ 240 V, 50/60 Hz 3-phase AC180V ~ 240 V, 50/60 Hz Feedback System Encoder Environment Temperature Operating : 0 ~ 40 C, Storage : -20 ~ 80 C Humidity Both operating and storage : 85% RH or less Vibration 0.5 G or less Contorl Mode Command Type Max. Input Pulse Frequency Electronic Gear Ratio Command Smoothing Time In position Jog Alarm Signal Encoder Output Control Panel Position A/B Phase, CW/CCW, + Pulse/Direction 500kpps 1/127 A/B 127 (A&B:1~10000) 0 ~ 10000ms 0~32767 Pulses Operated through control panel 10 sets of record A,B,Z Phase line driver 5-digits LED display 4 buttons Others Input Ports Servo On, Pulse Inhibition Output Ports Alarm, In Position Communication Ports Parameter setting, operating status monitoring
10
11
12 Basic Specifications Driver Model SDS12/15 SDS20 SDS30 SDS40 Applicable Motor Maximum Current Applicable Motor Rated Current 8.5A 11.4A 17.0A 22.8A 2.8A 3.8A 5.7A 7.6A Applicable Motor Power 120W~300W 400W~750W 750W~1kW 1kW~1.5kW Input Power Single-phase AC180V ~ 240 V, 50/60 Hz 3-phase AC180V ~ 240 V, 50/60 Hz Feedback System Encoder Environment Temperature Operating : 0 ~ 40 C, Storage : -20 ~ 80 C Humidity Both operating and storage : 85% RH or less Vibration 0.5 G or less Contorl Mode Speed Command Type 0 ~ ±10V Internal Speed Command Accelerate/Decelerate Setting Time Zero Speed Specified Speed Arrival Servo Lock Torque Speed Jog Alarm Signal Encoder Output Control Panel 3 Speeds with parameter setup 10ms~10000ms, Enable / Disable with parameter setup 0~255rpm 0 ~ rated speed with parameter setup Enable / Disable with parameter setup 0 ~ 300% rated torque Operated through control panel 10 sets of record A,B,Z Phase line driver `5-digits LED display, 4 buttons Others Input Ports Servo On, Motor Reverse, Internal Speed Output Ports Alarm, Zero Speed / Brake Communication Ports Parameter setting, operating status monitoring
13
14
15 Basic Specifications Driver Model SDD12/15 SDD20 SDD30 SDD40 Applicable Motor Maximum Current Applicable Motor Rated Current 8.5A 11.4A 17.0A 22.8A 2.8A 3.8A 5.7A 7.6A Applicable Motor Power 120W~300W 400W~750W 750W~1kW 1kW~1.5kW Input Power single-phase AC180V ~ 240 V, 50/60 Hz 3-phase AC180V ~ 240 V, 50/60 Hz Feedback System Encoder Environment Temperature Operating : 0 ~ 40 C, Storage : -20 ~ 80 C Humidity Both operating and storage : 85% RH or less Vibration 0.5 G or less Contorl Mode Position / Speed Speed Command Type 0 ~ ±10V Position Pulse Command Type Max. Input Pulse Frequency Electronic Gear Ratio Smoothing Time In position Jog Alarm Signal Encoder Output Control Panel A/B Phase, CW/CCW, + Pulse/Direction 500kpps 1/127 A/B 127 (A&B:1~10000) 0 ~ 10000ms 0~32767 Pulses Operated through control panel 10 sets of record A,B,Z Phase line driver output,z-phase open collector output 5-digits LED display,4 buttons Others Input Ports Servo On, Mode Switch, Command Pulse Stop Output Ports Alarm, In Position Communication Ports Parameter setting, operating status monitoring
16
17
18 Basic Specifications Driver Model SDPLC15 SDPLC20 SDPLC30 SDPLC50 SDPLC75 Applicable Motor Maximum Current Manual Control Communication Manual Generator 2.8A 3.8A 5.7A 9.4A 14.1A 5-digit LED Display + 4 buttons for : Parameter setting, Status monitoring, Jog RS232C/RS422/RS485 1.A, B Phase, Line Driver 2.CW/CCW 3.Pulse/direction User Input 10 User Output 8 Analog Input Analog Output 2 Channels 2 Channels Internal relay bits Variable bits Variable 960 PLC Command Motion Command PLC Capacity PLC Scan Time Motion Capacity Communicating Protocol Applicable number of Axies 17 Instructions :ALT, ANB, AND, ANI, CNT, END, K, LD, LDI, OR, ORB, ORI, OUT, PLS, RST, SET, TMR 28 Instructions : ABS, ACC, ADD, CAL, CMP, DIV, IF, INC, JMP, LAB, LDA, LDW, LDL, LOE, LOP, MUL, PADD, PSUB, RET, RPM, RST, SET, SUB, THN, TMR, WAT, WANT, END 1024 steps 0.08ms / Steps 1024 WORDS MIRLE OMRON MODBUS 0~7 for MIRLE Protocol, 0~99(OMRON), 1~247(MODBUS) * Dimension : Please refer to SD Series Servo Driver
19
20 Basic Specifications : MA Series Servo Motor Spec / Unit Motor Model MA06401C MA08751C MA13551A MA13102A MA13152A MA13102B MA13202B MA13302B Frame Size mm Rated Output W Rated Rotational Speed RPM Rated Torque N*m Peak Rotational Speed RPM Momentary Peak torque N*m Rated Current A Momentary Peak Current A Torque Constant N*m/A Induced Voltage Constant V/ krpm Line Inductance mh Rotor Moment of Inertia kg*cm Insulation Class - F F F F F F F F Operating Temp Weight kg Applicable Servo Driver SD15B SDP15 SDS15 SDD15 SD20B SDP20 SDS20 SDD20 SD20B SDP20 SDS20 SDD20 SD30B SD30C SDP30 SDS30 SDD30 SD40C SDP40 SDS40 SDD40 SD30B SD30C SDP30 SDS30 SDD30 SD50C SD75C
21
22
23
24
Understanding VFD. Variable Frequency Drive. nfi. nfi
Understanding VFD Variable Frequency Drive Practical Demonstration of VFD Delta- M Series 1.5 KW I/P: 230V 1/3 Phase O/P: 230 3 Phase VFD Status Screen Motor OFF Command Freq. Parameters Direction Amperes
More informationDIRECT DRIVE ROTARY TABLES SRT SERIES
DIRECT DRIVE ROTARY TABLES SRT SERIES Key features: Direct drive Large center aperture Brushless motor design Precision bearing system Integrated position feedback Built-in thermal sensors ServoRing rotary
More informationAF-300 E11 Adjustable Frequency Drive
AF-300 E11 Adjustable Frequency Drive The AF-300 E11 adjustable frequency drive is GE s new generation of micro drives. GE recognized your need for a high-performance, full-featured compact drive and designed
More informationMICROMASTER Encoder Module
MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified
More informationSmart-Encoder : Optical Incremental
1. Introduction The Smart-Encoder effectively eliminates multiple encoder part numbers by bringing intelligence and security to its design. In seconds, a four-digit LED display with two push-buttons enables
More informationRYKO Italia s.r.l. V. Casale Morano Po (Al) t f
Italia RYKO Italia s.r.l. V. Casale 43-15025 Morano Po (Al) t.0142 494411 f. 85872 June 30, 2003 ITALIA SERVICE BULLETIN - # 4-013 VFD parameter settings for conveyor equipment with Mitsubishi PLC MACHINES
More informationE6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
More informationEZ Encoder : Optical Incremental (P Series)
1. Introduction Our EZ Encoders effectively eliminate multiple encoder part numbers by bringing intelligence and security to the design. A four-digit LED display with two push-buttons enables the user
More informationADJUSTABLE SPEED DRIVES. nc1 Drive
ADJUSTABLE SPEED DRIVES nc1 Drive Ultra-Compact Sub-Micro Drive The nc1 is a sub-micro, or nano-sized drive with a full range of features to meet the needs of nearly any user. The nc1 is designed to be
More informationDigital 4 Q - Servo amplifier for brushless DC Servo motors (Trapeze)
DIGITAL SERVO TYPE MSDC General view interface RS 232 CE approval High dynamic, high band width High efficiency power stage Fast current controller Full protection mode Mono block system Limit switch Brake
More informationMaterial: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
More informationMaterial: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
More informationMaterial: Weight: IP Rating: Cable: Connector:
Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:
More informationProduct Information. RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads
Product Information RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads May 2014 RIQ 425 Absolute rotary encoders Synchro flange 01C Solid shaft for separate shaft
More informationLXM23DU10M3X motion servo drive - Lexium 23 - single phase V - 1 kw - I/O
Characteristics motion servo drive - Lexium 23 - single phase 200...255 V - 1 kw - I/O Main Range of product Product or component type Device short name Complementary Format of the drive Network number
More informationAbsolute Encoders Multiturn
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft
More informationPart No. ENC-LAB01 Users Manual Introduction EncoderLAB
PCA Incremental Encoder Laboratory For Testing and Simulating Incremental Encoder signals Part No. ENC-LAB01 Users Manual The Encoder Laboratory combines into the one housing and updates two separate encoder
More informationAbsolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
More informationVAT 20 Adjustable Frequency Drive
VAT 0 Adjustable Frequency Drive VAT 0 Adjustable Frequency Drive The VAT 0 is a small, flexible, low cost, well performing AC drive designed for use in small machines such as fans and conveyors. The drive
More informationØ50mm Shaft Multi-Turn Absolute Type
Ø50mm Shaft Multi-Turn Absolute Type Diameter Ø50mm Shaft Type Multi-Turn Absolute otary Encoder Features Total 23-bit resolution (8388608-division) of 10-bit single-turn (1024-division) and 13-bit multi-turn
More informationEZ Encoder : Optical Incremental
1. Introduction The EZ25 Encoder is a 2.5 incremental optical encoder, designed for optical shaft encoder motion control and precision sensor systems. Our ET7272 available models are short circuit proof
More informationComputer Controlled Advanced Industrial Servosystems Trainer (for AC motors) SERIN/CA
Technical Teaching Equipment Computer Controlled Advanced Industrial Servosystems Trainer (for AC motors) SERIN/CA Always included in the supply: Teaching Technique used RTC. EDIBON Real Time Control System
More informationMaterial: Weight: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-H-SR EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc
More informationThe measurements are stored in non-volatile memory, which retains data even when the power down.
Data Sheet: DSTAR.545.R1.ENG www.aep.it FAST Professional Handheld Indicator Dynamicstar is an professional indicator, ergonomic, extremely versatile and simple to use for measures FORCE, WEIGHT, PRESSURE,
More informationElectronic Lineshaft With Alignment F7 Drive Software Technical Manual
Electronic Lineshaft With Alignment F7 Drive Software Technical Manual Software Number: VSF11005X, Drive Models: CIMR-F7UXXXXXX-064, CIMR-F7UXXXXXX-065 Document Number: TM.F7SW.064, Date: 02/25/2010, Rev:
More informationAccessories. Servo Motors. Servo Motors B-45. Accessories
Servo Motors Servo Motors Accessories Accessories Introduction NX Accessories Page Cables B-46 Flexible Couplings B-50 Control Module B-51 Data Setting Software B-51 Accessory Sets B-52 Regeneration Units
More informationSeries 1100 ColorTS Servo Manual Registration System
Series 1100 ColorTS Servo Manual Registration System 400 Oser Avenue Hauppauge NY 11788 631 434 3700 phone 631 434 3718 fax www.empregister.com December 14, 2005 TABLE OF CONTENTS TABLE OF CONTENTS...
More information1000TII TURNING CNC CONTROLLER
1000TII TURNING CNC CONTROLLER 1000TII from CNCmakers Limited, is a superior turning machine CNC system with high performance 32-bit microprocessor, new structure design and open PLC process. It is employed
More informationMaterial: Weight: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-H EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc
More informationType SCH94FO. Type SCH94FO. Description
Type SCH94FO Hollow Shaft Fiber Optic Encoder - Ø 94 mm Dual Output Option (Digital & Fiber Optic) Fiber Optic Transmission up to 2,000 meters (~ 1.25 miles) No Degradation of Encoder Signal from Electrical
More informationLow-cost labelling system
Low-cost labelling system Star2000 Labelling-Printing handbook 060517.doc Edition: Revision 2 dated - 17 th May 2006 2 Application description In this labelling machine example two labels are required
More informationDRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationFunctions and Features: Prime key for fast filling and emptying.
P Basic BT501J BT1002J BT3002J BT501J, 0.005-10mL/min Acceptable pump heads are JY10 & D61x. The pump provides flow rates from 0.005 to 10mL/min. It can realize speed adjusting and direction changing and
More informationZN-PD. Smallest Air Particle Sensor in the Industry for In-line Measurement. Air Particle Sensor. Features
Air Particle Sensor Smallest Air Particle Sensor in the Industry for In-line Measurement Suitable for continuous measurement. With Realtime Clean Air Monitor. Be sure to read Safety Precautions on page
More informationG5-series AC Servo Drives with Built-in EtherCAT Communications Linear Motor Type
s with Built-in Linear Motor Type R88D-KN@-ECT-L Contents Ordering Information Specifications General Specifications Characteristics Servo Drives with 100 VAC Input Power Servo Drives with 200 VAC Input
More informationPhotoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units)
Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) All seven laser types provide ample long distance, for the Diffuse Reflective Model 1.000 mm and for Retroreflective
More informationUnderstanding VFD Allen Bradley Power Flex 4M Variable Frequency Drive. nfi
Understanding VFD Allen Bradley Power Flex 4M Variable Frequency Drive nfi Practical Demonstration of VFD Motor Speed Directly Proportional to Frequency Motor RPM= (120*F)/P Powerflex- 4M 0.4 KW= 0.5 Hp
More informationSimple motion control implementation
Simple motion control implementation with Omron PLC SCOPE In todays challenging economical environment and highly competitive global market, manufacturers need to get the most of their automation equipment
More informationCDHD Servo Drive. Technical Training Manual. Manual Revision: 2.0 Firmware Version: 1.3.x Software Version: 1.3.x.x
CDHD Servo Drive Technical Training Manual Manual Revision: 2.0 Firmware Version: 1.3.x Software Version: 1.3.x.x CDHD Introduction Revision History Document Revision Date Remarks 1.0 June 2012 Initial
More informationOrdering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.
Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous
More informationELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE
NorthStar brand SERIES HD35R Heavy Duty Encoder Key Features Phased Array Sensor for Reliable Signal Output Rugged Design with Wide-Spaced Oversized Bearings Unbreakable Code Disc up to 5000PPR Improved
More informationLabel Applicator HERMA 400
Label Applicator HERMA 400 Info GB V6.0 / 30.3.07 [ Facts & Data ] R Constructional variant Right-hand or left-hand version, always flexible to use L Power supply / Line voltage Max. power consumption
More informationSPECIFICATION NO Model 207 Automatic GTAW Welding System
1.0 Introduction The Model 207 is a completely self-contained Gas Tungsten Arc Welding (GTAW) System requiring only input power, inert gas and AMI Welding Head (or manual torch) for operation. Its small
More informationRevision 1.2d
Specifications subject to change without notice 0 of 16 Universal Encoder Checker Universal Encoder Checker...1 Description...2 Components...2 Encoder Checker and Adapter Connections...2 Warning: High
More informationProduct Data Sheet 4656 ZW
The engineer's choice 4656 ZW INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More information50 Hz 60 Hz VOLTAGE Connections
CONTINUOUS DUTY MECHANICAL CHARACTERISTICS 372 207 31,8 12,7 15,1 14,0 3,0 336 187 28,7 11,5 13,6 12,6 2,7 312 174 26,7 10,7 12,6 11,7 2,5 413 230 35,3 14,1 16,7 15,5 3,3 Winding code M0 Number of leads
More informationENGINEERING PUBLICATION
ENGINEERING PUBLICATION MOTION CONTROL DIVISION PRODUCT: JUSP-NS600 SIGMA II INDEXER SUBJECT: USING THE DIGITAL OPERATOR WITH THE SIGMA II INDEXER CATEGORY: TECH NOTE ENGINEER: Paul Zajac DISTRIBUTION:
More informationProduct Data Sheet 8506 VW-691
The engineer's choice 8506 VW-691 INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More informationProduct Data Sheet 4656 EZ
The engineer's choice 4656 EZ INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More informationAccessories. Servo Motors. Servo Motors B-47. Accessories
Servo Motors Servo Motors Accessories Accessories Page Cables B-48 Flexible Couplings B-52 Control Module B-55 Data Setting Software B-55 Accessory Sets B-56 Battery B-56 Regeneration Units B-57 B-47 Accessories
More informationTransmitter Interface Program
Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following
More informationSigma 1 - Axis Servo Motor and Cables - Troubleshooting Guide
LAST UPDATED: 12/21/2018 Introduction Press [POWER OFF]. Set the main circuit breaker to the OFF position. Wait until the high voltage LED on the vector drive is completely off before disconnecting any
More informationAbsolute encoders multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a maximum resolution
More informationBOSTON GEAR CONTROLLERS. ACE 10 Series 1/4 through 3 HP Adjustable Frequency AC Motor Controllers MEX (55) QRO (442)
BOSTON GEAR CONTROLLERS ACE 10 Series 1/4 through 3 HP Adjustable Frequency AC Motor Controllers ACE 10 Series Noted for exceptionally low motor noise, high starting torque and cool operation in a compact
More informationFrequency Converter Fv
2 Bosch Rexroth AG Electric Drives and Controls Documentation Brake chopper with up to 30 kw continuous braking power Easy to operate and service (detachable fan, LCD operating panel with copy function)
More informationHybrid Chart Recorder 250 mm (10")
Hybrid Chart Recorder 250 mm (10") RD5100 Series U High Speed Scanning at 36 Points/Sec and High-Speed Recording U High Accuracy of 0.05% U Various Industrial Values Can be Measured at the Same Time with
More informationPCM-22 Rotary Knife Controller Operators Manual
PCM-22 Rotary Knife Controller Operators Manual Information furnished by EMERSON EMC is believed to be accurate and reliable. However, no responsibility is assumed by EMERSON EMC for its use. EMERSON EMC
More informationModel IQ4-PC User Manual Revision Date:
Basic Specifications Supply Volts 230V 50/60Hz ±15% 115V 50/60Hz ±15% 24V DC (isolated) ±15% Power Consumption Max. 3VA (IQ4-PC-R0) Max. 6VA (IQ4-PC-R2-PSI24-RT) Operating Temperature -5 ~ +60 C Operating
More informationDigital Ratio Controller
Digital Ratio Controller RSC-406 Control Panel USER S MANUAL RATIO CONTROLLER SPEED RUN PRG ERR RATIO % CH RSC-406 Prelude Thank you for applying our RSC-406 Ratio Controller (abb.406) to you machinery
More informationUser Guide UD51. Second encoder small option module for Unidrive. Part Number: Issue Number: 5.
EF User Guide UD51 Second encoder small option module for Unidrive Part Number: 0460-0084-05 Issue Number: 5 www.controltechniques.com Safety Information The option card and its associated drive are intended
More informationAnalog Input Module HART Ex n Inputs, 8 Channels Series 9461/15
> 8 channels for 2-wire HART transmitters > Inputs for Ex nl, Ex na and Nonincendive > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit >
More informationPBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories
PBC series IEC-Type Contactors & Accessories 9-80 Amp AC-3, 25-125 Amp AC-1 AC Coils File E38802 (PBC) RoHS Ready Users should thoroughly review the technical data before selecting a product part number.
More informationDKS 40: Incremental Encoder
DKS 4: Incremental Encoder By adopting highly successful Mini- Disc technology, the DKS 4 is extremely robust and can resist high levels of shock and vibration. Besides has the DKS 4 a very high protection
More informationLong Stroke and High-Speed Movement
NS NS Rotating Nut inear Actuator ong and High-Speed Movement w w w. i n t e l l i g e n t a c t u a t o r. c o m Nut Rotation Actuator that Provides ong and Speed Nearly As Fast as a inear Speed 0 mm/s,
More informationThis document is a reference document that shows the menus in the 5500sc, 9610sc and 9611sc analyzers. There are 3 top-level menus:
Controller menus 5500sc, 9610sc and 9611sc analyzers DOC273.53.80566 Introduction This document is a reference document that shows the menus in the 5500sc, 9610sc and 9611sc analyzers. There are 3 top-level
More informationTopic: Instructional David G. Thomas December 23, 2015
Procedure to Setup a 3ɸ Linear Motor This is a guide to configure a 3ɸ linear motor using either analog or digital encoder feedback with an Elmo Gold Line drive. Topic: Instructional David G. Thomas December
More information16-Bit DSP Interpolator IC For Enhanced Feedback in Motion Control Systems
16-Bit DSP Interpolator IC For Enhanced Feedback in Motion Control Systems David T. Robinson Copyright 2013 ic-haus GmbH Feedback in Motion Control Systems Position control Accuracy Angular Endpoint Speed
More informationLED control gear Compact fixed output. Uconverter LCI 55 W 1400 ma O010 TOP series Ø4,4. Ordering data
Product description 1-channel for indoor use Inbuilt for luminaires of protection class I Output current and output voltage adjustable FA output 12 V TC input channel ominal life of 50,000 h (at ta max.
More informationSingle Axis Position Controller
SERIES P9511 Single Axis Position Controller Compact Construction Simple Go-to operation Integrated Relay Output Integrated Mains Power Supply ELEKTRO-TRADING sp. Z o.o. 44-109 Gliwice, ul. Mechaników
More informationPCM-24 Press Feed Controller
PCM-24 Press Feed Controller Information furnished by EMERSON EMC is believed to be accurate and reliable. However, no responsibility is assumed by EMERSON EMC for its use. EMERSON EMC reserves the right
More informationFigure 1: Standard 906 Sensor and Pulser Disc. Figure 2: Standard 906 Sensor and Pulser Wrap
Description: The TR5000 is a Full Logic Control Process ratemeter that can display up to three separate values of rate and compare them to programmable set points. Rates A & B can be programmed by the
More informationEVENT INPUT/OUTPUT MODULE [PUME]
PUM Series Multi-loop module type Temperature controller DATA SHEET EVENT INPUT/OUTPUT MODULE [] is a digital input/output module used as an auxiliary input/output of control modules. Each module, 30mm
More informationGeneral Specifications
General Specifications WG41F11C Compact O Frame GS 14M04B10-20E-Z1 [Style: S1] Overview The WG41F11C Compact O frame is a space-saving frame designed for coating lines of battery electrode sheets. This
More informationFor applications from 0.25 to 5 HP, the MD60 is a simple AC Microdrive that can be panel mounted as well as wall or machine mounted.
For applications from 0.25 to 5 HP, the MD60 is a simple AC Microdrive that can be panel mounted as well as wall or machine mounted. N223 Reliance Electric s MD60 AC Drive is ready to operate out-of-the-box!
More information02/11/2015
DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage
More informationSPECIFICATION NO NOTE
NOTE The Model 207-1 is a special version of the standard M-207 Power Supply. It has been altered for a special applications requiring low current operation at high arc voltages in ambient and pressurized
More informationMotion Control G7 Drive Software Technical Manual
Software Number: VSG13306X, Drive Models: CIMR-G7UXXXXX-117 Document Number: TM.G7SW.117, Date: 05/16/08, Rev: 08-05 Motion Control G7 Drive Software Technical Manual Contents: 1.0 Overview... 3 2.0 Changes
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationPRO-CTR100/200 Counter/Rate Controller
PRO-CTR100/200 Counter/Rate Controller 1 This advanced controller is ideal for a wide variety of rate monitoring and batching applications. It is available with either a single or dual display, and has
More informationBlown Film Extrusion. Line Control. 5 Layers CD Series IBC Temperature USER MANUAL
Blown Film Extrusion Line Control 5 Layers CD Series IBC Temperature USER MANUAL P.O.B. 1122 Afula Illit 18550, Israel Tel: +972-4-6405857 Fax: +972-4-6405911 info@sysmetric-ltd.com Manual Number: 5CDIT102
More informationOperating instructions Electronic preset counter Type series 717
Operating instructions Electronic preset counter Type series 717 1. Description 5.98.3_gb 6-digit adding/subtracting counter with two presets Very bright 8mm high LED display Counting and preset range
More informationUNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load Cell
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com UNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load
More informationClamp 200 A AC/DC (+ V AC/DC + Ω)
PCE-DC1 Clamp meter 200 A AC/DC & Freq. LC display 3 2/3 digits, with backlight measures AC / DC current, AC voltage & frequency Hold function / DC A zero reset function tests voltage without contact automatic
More informationProgramming Manual for ETA25PM and MABxxAPM series
Programming Manual for ETA25PM and MABxxAPM series Series ETA25PM ETA25PM ETA25PM Design Option F R K Series ETA25PM MABxxAPM Design Option Special Version (On request, only with MOQ orderable) Multiturn
More informationCat. No. O008-E1-04 USER S MANUAL. 3F88L-160/162 Cam Positioner
Cat. No. O008-E1-04 USER S MANUAL 3F88L-160/162 Cam Positioner Thank you for choosing this 3F88L-160/162 Cam Positioner. Proper use and handling of the product will ensure proper product performance, will
More informationSoft starter, 66 A, V AC, Us= 24 V DC, with control unit, Frame size N. Function Soft starter for three-phase loads, with control unit
DATASHEET - S811+N66N3S Delivery program Soft starter, 66 A, 200-600 V AC, Us= 24 V DC, with control unit, Frame size N Part no. S811+N66N3S Catalog No. 168978 Eaton Catalog No. S811PLUSN66N3S EL-Nummer
More informationElectric Rotary Modules. Rotary Actuators
Electric Rotary Modules Rotary Actuators Electric Rotary Modules Rotary Actuators ROTARY ACTUATORS Series Size Page Miniature Rotary Actuators MRD-S 224 MRD-S 4 232 MRD-S 8 234 MRD-S 12 236 Explanation
More informationIncremental Encoder DFS60 in a class of its own. The high-resolution incremental encoder range
ProduCt information Incremental Encoder DFS60 in a class of its own The high-resolution incremental encoder range PDF processed with CutePDF evaluation edition www.cutepdf.com DFS60 In a class of its own
More informationMAGNETIC TAPE. Series MB. incremental scale. Key-Features:
MAGNETIC TAPE incremental scale Series MB Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...3 Installation Instruction...3 Digital Displays...4 Order Code...5 - Available
More informationTest of ScannerMAX Saturn 1 with 600Hz Sine-wave input, having an optical scan angle of 40 optical degrees peak to peak.
Test of ScannerMAX Saturn 1 with 600Hz Sine-wave input, having an optical scan angle of 40 optical degrees peak to peak. What follows are scope screen shots of a test of ScannerMAX Saturn 1B with our standard
More informationEDL8 Race Dash Manual Engine Management Systems
Engine Management Systems EDL8 Race Dash Manual Engine Management Systems Page 1 EDL8 Race Dash Page 2 EMS Computers Pty Ltd Unit 9 / 171 Power St Glendenning NSW, 2761 Australia Phone.: +612 9675 1414
More informationDot-matrix full-color array rotating advertising screen specifications. Contents. 1 overview functional requirements... 2
Contents 1 overview... 2 2 functional requirements... 2 2.1 The working principle of the rotating advertising screen... Error! Bookmark not defined. 2.2 Hanging full-color screen for ads... Error! Bookmark
More informationAnalog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/
> 8 channels for 2-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit > Module
More informationCondition Monitoring Custom Products
Features: CMCP500 Series Transmitters World s Most Popular HMI Machine Mimics Historical and Real Time Trending Current and Historical Alarm Lists Standard MODBUS A to D Converter Other Protocols Optional
More information1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
More informationModel DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Model DT-311J And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL 1. GENERAL The DT-311J DIGITAL
More informationM Traverse User Manual Revision F
M Traverse User Manual 0001-0122 Revision F i Technical Assistance If you have comments or questions concerning the operation of the M Traverse, a member of our Technical Support Staff will be happy to
More informationTABLE OF CONTENTS. Instructions:
TABLE OF CONTENTS Instructions: 1 Overview 1 2 Main technical parameters 1 3 Display and keyboard 2 3.1 Display Window 2 3.2 Indicator 4 4. Operation 4 4.1 Power 4 4.2 Zero 4 Modified 4 4.3 Modified 4
More informationSM-1100/SM-1500/SM-1600 ROTARY ACTUATORS
SM-1100/SM-1500/SM-1600 ROTARY ACTUATORS GENERAL DESCRIPTION The SM-1100, SM-1500 and SM-1600 Series are multi-turn, rotary actuators, designed to meet the exacting requirements for closed-loop modulating
More informationFOREST SHUTTLE S / L / M RECEIVER
2 FOREST SHUTTLE S / L / M RECEIVER QUICK INSTALLATION OF ASSEMBLED TRACKS : Programming Shuttle S / L / M Receiver to a channel One pre-assembled motorized curtain track systems is standard programmed
More information