CCD-TR311/TR311E/TR411E/TR412E/TR511E/ TR512E/TR640E/TR730E/TR840E/TR845E

Transcription

1 D-TR311/TR311E/TR411E/TR412E/TR511E/ TR512E/ RMT-708/717 SERIE MANUAL B MEANISM Photo : D-TR840E : RMT-708 AEP Model D-TR411E/TR412E/TR511E/TR640E/TR840E/ TR845E UK Model D-TR411E/TR511E/TR640E/TR840E East European Model North European Model Russian Model D-TR411E/TR412E/TR511E/TR640E/TR840E E Model D-TR311/TR311E/TR511E/TR512E/TR730E ong Kong Model D-TR311E/TR511E Australian Model D-TR311E/TR511E/TR512E/TR840E Tourist Model D-TR311/TR311E hinese Model D-TR311E/TR511E/TR512E SPEIFIATIONS For MEANISM ADJUSTMENTS, refer to the 8mm ideo MEANIAL ADJUSTMENT MANUAL II ( ). ideo camera recorder System ideo recording system 2 Rotary heads elical scanning FM system Audio recording system Rotary heads, FM system ideo signal D-TR311 : NTS color, EIA standards D-TR311E/TR411E/TR511E/ TR512E/TR640E/TR730E/TR840E/ TR845E : PAL color, EIA standerds Usable cassette 8mm video format cassette D-TR311/TR311E/TR411E/TR412E/ TR511E/TR512E/TR640E/TR730E : standard 8 D-TR840E/TR845E : i8 or standard 8 Recording / Playback time (using 90 min. cassette) SP mode: 1 hour and 30 minutes LP mode: 3 hours Fastforward/rewind time (using 90 min. cassette) Approx. 5 min. Image device D (harge oupled Device) iewfinder Electronic viewfinder D-TR311/TR311E/TR411E/TR412E/ TR511E/TR640E/TR840E/TR845E : Monochrome D-TR512E/TR730E : olor 113,578 (521 x 218) Lens ombined power zoom lens Filter diameter 1 7/16 in. (37 mm) D-TR411E (AEP, UK) : 16 x (Optical), 32 x (Digital) D-TR412E (AEP) : 16 x (Optical), 64 x (Digital) D-TR311/TR311E : 16 x (Optical), 100 x (Digital) D-TR411E (EE, NE, RU) : 16 x (Optical), 160 x (Digital) D-TR412E (EE, NE, RU) : 16 x (Optical), 200 x (Digital) D-TR511E (AEP, UK)/TR640E (AEP, UK)/TR840E (AEP, UK)/ TR845E : 18 x (Optical), 72 x (Digital) D-TR511E (EE, NE, RU, E, K, AUS, N)/TR512E/TR640E (EE, NE, RU)/TR730E/TR840E (EE, NE, RU, AUS) : 18 x (Optical), 220 x (Digital) Focal distance D-TR311/TR311E/TR411E/ TR412E : 3/16-2 5/8 in. ( mm) D-TR511E/TR512E/TR640E/ TR730E/TR840E/TR845E : 3/16-8 in. ( mm) When converted to a 35 mm still camera D-TR311/TR311E/TR411E/ TR412E : 1 9/ /8 in. ( mm) D-TR511E/TR512E : 1 9/16-28 in. ( mm) D-TR640E/TR730E/TR840E/ TR845E : 1 7/8-33 1/2 in. ( mm) olor temperature Auto Minimum illumination* D-TR311/TR311E/TR411E/TR412E : 0.4 lux at F1.4 (isible minimum low light 0.2 lux) D-TR511E/TR512E : 0.4 lux at F 1.4 D-TR640E/TR730E/TR840E/ TR845E : 0.7 lux at F 1.4 D-TR511E/TR512E/TR640E/ TR730E/TR840E/TR845E : 0 lux (in NightShot mode)** * Minimum illumination expresses the light level a camcorder requines to produce a picture. isible minimum low light expresses the light level to produce a visible signal. **Object invisible for the dark can be shot with infrared lighting. Illumination range D-TR311/TR311E/TR411E/ TR412E/TR511E/TR512E : 0.4 lux to 100,000 lux D-TR640E/TR730E/TR840E/ TR845E : 0.7 lux to 100,000 lux Recommended illumination More than 100 lux Input and output connectors S video input/output (D-TR840E/TR845E only) 4-pin mini DIN Luminance signal : 1 p-p, 75 ohms, unbalanced D-TR311 : hrominance signal : p-p, 75 ohms, unbalanced D-TR311E/TR411E/TR412E/ TR511E/TR512E/TR640E/TR730E/ TR840E/TR845E : hrominance signal : 0.3 p-p, 75 ohms, unbalanced ideo input (D-TR840E : AUS only)/output Phono jack : 1 p-p, 75 ohms, unbalanced ontinued on next page hideo ORDER D-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/TR640E/TR730E IDEO ORDER D-TR840E/TR845E MIROFILM

2 D-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ 4-2. PRINTED WIRING BOARDS AND SEMATI DIAGRAMS TIS NOTE IS OMMON FOR PRINTED WIRING BOARDS AND SEMATI DIAGRAMS. (In addition to this, the necessary note is printed in each block.) D-181 (D IMAGER) PRINTED WIRING BOARD Ref No. D-181 BOARD: 3,000 series D-181 BOARD (SIDE B) D-181 BOARD (SIDE A) For printed wiring boards. b: Pattern from the side which enable seeing. (The other layer's patterns are not indicated.) ircled numbers refer to waveforms. Through hole is omitted. There are few cases that the part printed on diagram isn t mounted in this model. hip parts. Transistor Q B E Q Q Q Q Diode Measuring conditions voltage value and waveform. The object is color bar chart of pattern box. oltages and dc between ground and measurement points. Readings are taken with a digital multimeter (D 10MΩ). oltages variations may be noted due to normal production tolerances. 1.onnection Pattern box 1.5m B For schematic diagrams. All capacitors are in µf unless otherwise noted. pf: µµf. 50 or less are not indicated except for electrolytics and tantalums. hip resistor are 1/16W unless otherwise noted. kω : 1000Ω, MΩ : 1000kΩ. aution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, because it is damaged by the heat. Some chip part will be indicated as follows. Example 541 L452 22U 10U TA A 2520 Â Â Kinds of capacitor Temperature External dimensions (mm) chracteristics ( onstants of resistors, capasitors, Is and etc with XX indicate tha they are not used. In such cases, the unused circuits may be indicated. Parts with differ according to the model/destination. Refer to the mount table for each function. All variable and adjustable resistors have characteristic curve B, unless otherwise noted. Signal name XEDIT n EDIT PB/XRE n PB/RE 2 : non flammable resistor. 1 : fusible resistor. : panel designation. A : B+ Line B : B Line J : IN/OUT direction of (+, ) B LINE. : adjustment for repair. ircled numbers refer to waveforms. The components identified by mark!or dotted line with mark! are critical for safety. Replace only with part number specified. When indicating parts by reference number, please include the board name. Les composants identifiés par une marque! sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié. Lens reference plane surface Imaging surface of D imager (I401 on D-181 board) 2.Adjust the distance so that the output waveform of Fig. a and the Fig. b can be obtain. Yellow A B A=B B A Fig. a (ideo output terminal output waveform) Yellow yan Green White Magenta Red yan Green White Magenta Red Blue Electron beam scanned frame Blue Fig. b (Picture on monitor T) RT picture frame A 09 D-181 BOARD 401 A B A A B-3 N401 B-4 I401 A-1 L401 B-1 Q402 B-3 R401 A-3 R404 B-3 R405 A F-119 (OLOR EF) DD-105 (POWER) For Printed Wiring Boards. There are few cases that the part isn't mounted in this model is printed on this diagram. hip transistor Q B E D-181 (D IMAGER) MA-311 (STEREO MI) PJ-81 (A IN/OUT) F-49 (ONTROL) D-181BOARD I401 1, 2 I401 3, 4 I p-p 7p-p 1. Note on the D imager replacement The D imager is not mounted for the already mounted D-181 board supplied as the repair parts. When replacing the D-181 board, remove the D imager from the old board and install on the new board. Perform all adjustments of the camera block when the D imager has been replaced. andle the D imager with attention such as MOS I as it may be broken by static electricity in the structure. Also, prevent the receiving light section from dust attached and strong light. 4-5 D IMAGER D-181

3 SE-65 (STEADY SOT) PRINTED WIRING BOARD Ref No. SE-65 BOARD: 3,000 series E D SE-65 BOARD (SIDE B) SE-65 BOARD (SIDE A) SE-65 BOARD D B E E A A A A B-3 N451 A-3 D451 A-6 D452 A-6 I451-6 J451 A-8 L451 B-3 L452 B-2 L453 A-3 L454 A-2 R451-6 R452 D-3 R453 D-3 R454-6 R455 D-6 R456-3 R457-3 R458-6 R459-6 R460-3 R461-6 R462 B-3 R463 B-3 SE451 B-3 SE452 D-3 B A LB-54 (BAK LIGT) F-120 (OLOR EF) For Printed Wiring Boards. There are few cases that the part isn't mounted in this model is printed on this diagram. hip diode AMERA, Y/ PROESSOR, IN/OUT, RE/PB EAD AMP, SERO/SYSTEM ONTROL, SERO, AUDIO, MODE ONTROL SE-65 (STEADY SOT) STEADY SOT SE-65

4 D-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ For schematic diagrams. Refer to page 4 13 for Printed Wiring Board BOARD (1/9) NTS: Mz PAL : Mz I NTS: Mz PAL : Mz I501 11, 12 7p-p 4 I501 25, 26 7p-p 5 I501 28, 31 I I p-p usec I I PB 0.4p-p I AMERA (1) (1/9)

5 D-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ For schematic diagrams. Refer to page 4 13 for Printed Wiring Board AMERA (2) (2/9)

6 For schematic diagrams. Refer to page 4 13 for Printed Wiring Board BOARD (3/9) p-p 3.1p-p I202 3 NTS:3.58 Mz PAL:4.43 Mz I p-p 4 I202 6 I p-p 2 I I PB 0.4p-p I I p-p I I p-p 3.2p-p 7.16 Mz I I p-p I I PB p-p I I p-p I usec I p-p I usec I Y/ PROESSOR -195 (3/9)

7 D-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ For schematic diagrams. Refer to page 4 13 for Printed Wiring Board BOARD (4/9) p-p I p-p I p-p I151 17, p-p I151 25, I (2.1p-p) I (1.6p-p) IN/OUT (4/9)

8 -195 BOARD (5/9) For schematic diagrams. Refer to page 4 13 for Printed Wiring Board. 0. 7p-p I Mz Q I001 5 TRIG : I PB 0.4p-p I PB 0.4p-p I PB 0.4p-p I p-p 2 I I001 44, p-p I I I RE/PB EAD AMP -195 (5/9)

9 For schematic diagrams. Refer to page 4 13 for Printed Wiring Board BOARD (6/9) p-p 20 Mz I I I I402 55, usec I usec I usec I msec I msec I I SERO/SYSTEM ONTROL -195 (6/9)

10 For schematic diagrams. Refer to page 4 13 for Printed Wiring Board. SERO -195 (7/9)

11 -195 BOARD (7/9) 56 For schematic diagrams. Refer to page 4 13 for Printed Wiring Board BOARD (8/9) p-p 2.9p-p msec I451 1, 2, I PB 58 2 I I p-p 2.8msec I I p-p p-p NTS:3.58 Mz PAL:4.43 Mz I AUDIO -195 (8/9)

12 D-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ For schematic diagrams. Refer to page 4 13 for Printed Wiring Board BOARD (9/9) p-p Mz I p-p 32 kz I MODE ONTROL (9/9)

13 PJ-81 (A IN/OUT) PRINTED WIRING BOARD Ref No. PJ-81 BOARD: 3,000 series B PJ-81 BOARD (SIDE B) PJ-81 BOARD (SIDE A) PJ-81 BOARD N101-2 D101-1 D102-3 D103-4 D105-5 D106-5 D107-5 J101 A-3 L101-3 L102-3 L103-2 L104-2 Q101-5 Q102-4 R101-4 R102-4 R103-4 R104-4 R105-4 R106-5 R107-5 R108-5 R109-3 A F-119 (OLOR EF) D-181 (D IMAGER) For Printed Wiring Boards. There are few cases that the part isn't mounted in this model is printed on this diagram. F-49 (ONTROL) hip diode MA-311 (STEREO MI) DD-105 (POWER) PJ-81 (A IN/OUT) A IN/OUT PJ-81

14 MA-311 (STEREO MI) PRINTED WIRING BOARDS Ref No. MA-311 BOARD: 3,000 series MA-311 BOARD (SIDE B) MA-311 BOARD (SIDE A) D B A MA-311 BOARD 301 A A A A A A B B B B B B B B B B B D B D D D D D D D D D D D D D D D D D D D D B D B B N301 B-2 N302 B-3 N303 B-1 D301 A-6 D302 A-6 D303 B-5 D305 B-7 D307 D-5 D308 B-7 D309 A-5 D322 B-5 D323 B-6 I301 A-7 I321-6 I322 D-3 J310 B-5 L301 B-1 Q301 A-5 Q302 A-1 Q303 A-2 Q304 B-3 Q305 A-1 Q321 B-5 Q322 B-6 R301 A-5 R302 A-1 R303 A-2 R304 A-3 R305 A-2 R306 B-7 R307 B-1 R308 D-3 R309 D-3 R310 B-3 R311 A-1 R312 B-5 R313 B-5 R314 A-1 R315 A-1 R321-5 R322 B-3 R323 A-4 R324-5 R325 B-5 R326 B-5 R327 B-5 R328 B-5 R329 B-5 R330 B-6 R331 B-6 R332 B-6 R333 B-6 R334 B-6 R335-4 R336-4 R337-3 R338 D-3 R339-5 R340-3 R341-5 R342-3 R343-5 R344-5 R345 D-3 R346-3 R347 D-3 R348 D-5 R349 D-5 R350 D-5 R351 D-5 R352-2 R353 D-5 R354 D-5 R355 D-5 R356 D-6 R357 D-6 R358 D-5 R359-2 R360-6 R361 D-5 R362 D-6 R363 D-5 R364 D-5 R365-5 R366-5 R367-5 R368 D-5 S301 D-4 S302 D-2 S303-1 For Printed Wiring Boards. There are few cases that the part isn't mounted in this model is printed on this diagram. hip transistor Q B E F-119 (OLOR EF) DD-105 (POWER) D-181 (D IMAGER) MA-311 (STEREO MI) PJ-81 (A IN/OUT) F-49 (ONTROL) ONTROL SWIT BLOK, STEREO MI MA-311 FK-8500, SS

15 STEREO MI MA-311

16 F-49 BOARD 1 2.9p-p kz I001 2 ONTROL F

17 D-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ F-99 (B/W EF (B/W EF MODEL)) PRINTED WIRING BOARD Ref No. F-99 BOARD: 10,000 series D F-99 BOARD (SIDE A) F-99 BOARD (SIDE B) 1 F-99 BOARD 901 D D D D B B B D A A B-3 R919 B-3 R920-3 R921 B-3 R922 A-3 R923 A-3 R924 B-3 R925 B-3 R926 A-3 R927-1 R928-1 R928 D-2 R903 A-2 R904 A-1 T901 B-1 2 N901 D-3 N902-1 D901 D-1 D903 A-3 T901-2 W901 B-1 I901 D-1 L901 B-3 L902-3 L903 A-1 Q901-3 Q902-3 Q903-3 Q904-3 B R901-3 R902-3 R903 D-2 R904-3 R905-3 R906-3 R907-1 R908-1 R909-1 R910-1 R911 D-3 R912 D-1 R913-2 R914-2 R915 B-2 R916 D-2 R917 D-2 R918-3 A F-99 BOARD 1 1p-p For Printed Wiring Boards. This board is four-layer print board. owever, the patterns of layers 2 to 3 have not been included in the diagram. There are few cases that the part isn't mounted in this model is printed on this diagram. hip transistor Q B E 2 I F-99 (B/W EF) 2.2p-p I B/W EF F-99 (B/W EF MODEL)

18 F-119 (OLOR EF (OLOR EF MODEL)) PRINTED WIRING BOARD Ref No. F-119 BOARD: 10,000 series F-119 BOARD (SIDE B) F-119 BOARD (SIDE A) F-119 BOARD I I p-p 7.5p-p B 1 4 I p-p I A I For Printed Wiring Boards. This board is four-layer print board. owever, the patterns of layers 2 to 3 have not been included in the diagram. There are few cases that the part isn't mounted in this model is printed on this diagram. hip transistor Q B E F-119 (OLOR EF) DD-105 (POWER) D-181 (D IMAGER) F-49 (ONTROL) MA-311 (STEREO MI) PJ-81 (A IN/OUT) -119 BOARD B A B B B B B B B B B B A A A A A A-1 N5401 B-1 N5402 A-4 D5401 B-1 I5401 B-3 I I5404 A-1 L L L5403 A-2 L5404 B-1 L5405 B-4 Q R R R R R R5406 A-2 R5407 A-2 R R R R5411 B-2 R5412 B-2 R R R5415 B-2 R R5417 B-3 R5418 B-3 R R R R R R5423 A-3 R R R R R R R R5431 B-2 R5432 B-2 R R R5435 B-2 R5436 B-2 R5437 B-2 R5438 B-2 R5439 B-2 R R R5444 B-1 R5445 B-1 R5446 B-1 R5447 B-1 R5448 B-1 R5449 B-2 R5452 B-2 R5456 A-4 R5457 A-4 R5458 A-4 R5460 A-1 R5464 A-1 R5468 A-2 R5469 A-4 R5470 B-1 R5471 B-4 R kz I , 21 I Mz I , Mz I I p-p 2.7p-p OLOR EF F-119 (OLOR EF MODEL)

19 D-TR311/TR311E/TR411E/TR412E/TR511E/TR512E/ F-120 BOARD 1 2.4p-p I p-p I OLOR EF, BAK LIGT F-120, LB-54 (OLOR EF MODEL)

20 DD-105 BOARD p-p kz I p-p 506 kz I E POWER DD-105