About this User Manual. Contents

Transcription

1 _en.qxd :13 Pagina 1 Abut this User Manual This manual cntains all infrmatin yu will need t initially install and perate yur new TV. Als read the help texts which are being displayed at the bttm f the screen. If this instructin manual des nt give an answer r if Trubleshting des nt slve yur TV prblem, yu can call yur Lcal Philips Custmer r Service Centre. See the supplied Wrldwide guarantee bklet. Please, have the Mdel and Prduct number which yu can find at the back r the bttm f yur televisin set r n the packaging, ready, befre calling the Philips custmer supprt service. Mdel: 37PF9631D/10; 42PF9631D/10; 50PF9631D/10; 37PF9641D/10 Prduct N:... Cntents Safety warnings Getting started Use f the remte cntrl RC4401/ Use f the ptin key Keys at the right side f the TV Intrductin: Digital TV Switch the TV n First time installatin Hw t navigate thrugh the menus Use f the settings Adjust picture menu settings Adjust sund menu settings Enjy Ambilight Adjust feature menu settings Search fr and stre TV channels Rearrange the channel number list Set yur preferences Select yur cnnectins Select a decder channel number Reset the factry settings Hw t upgrade the TV sftware Create yur favurite list EPG (Electrnic Prgramme Guide) Multimedia Brwser Teletext T make vide and audi cnnectins Side panel verview Rear panel verview Cnnect: a VCR r DVD recrder tw VCRs r VCR and DVD recrder...47 a satellite receiver a DVD player, HD receiver/game cnsle 48 a DVD player r HD receiver a DVD player, satelitte r HD receiver..49 a PC a Hme Cinema amplifier Use the Cmmn Interface slt Select cnnected equipment Recrd with yur recrder Audi- and vide equipment keys Trubleshting Annex 1 - Philips TV sftware upgrade with prtable memry Annex 2 - Philips TV-Slideshw Frmat with backgrund music Annex 3 - Philips TV - Digital camera and USB issues Annex 4 - Issues referring t cnnected peripherals with a HDMI cnnectr Index Recycling Prduct infrmatin

2 _en.qxd :13 Pagina 2 Safety warnings General D nt insert the pwer plug in a wall scket r hang the TV t the wall befre all cnnectins are made. Place r hang the TV wherever yu want, but make sure that air can circulate freely thrugh the ventilatin slts. D nt install the TV in a cnfined space such as a bk case r a similar unit. T prevent any unsafe situatins, n naked flame surces, such as lighted candles, shuld be placed in the vicinity. Avid heat, direct sunlight and expsure t rain r water. The equipment shall nt be expsed t dripping r splashing. Care f the screen D nt tuch, push r rub r strike the screen with anything hard as this may scratch, mar r damage the screen permanently. And please d nt rub with dust clthes with chemical treatment. D nt tuch the surface with bare hands r greasy clth (sme csmetics are detrimental t the screen). Unplug the TV befre cleaning the screen. When the surface becmes dusty, please wipe gently with absrbent cttn r ther sft materials like chamis saks. D nt use acetne, tluene and alchl because they cause chemical damage. D nt use liquid cleaners r aersl cleaners.wipe ff saliva r water drps as sn as pssible.their lng time cntact with the screen causes defrmatins and clur fading. Statinary images n the TV screen A characteristic f LCD and Plasma Panels is that displaying the same image fr a lng time can cause a permanent after-image t remain n the screen. Nrmal use f the TV shuld invlve the shwing f pictures that cntain cnstantly mving and changing images that fill the screen. Examples f statinary images (this is nt an allinclusive list, yu may encunter thers in yur viewing): TV and DVD menus: listings f DVD disk cntent; Black bars: when black bars appear at the left and right side f the screen, it is recmmended t change t a picture frmat s that the picture fills the entire screen; TV channel lg: present a prblem if they are bright and statinary. Mving r lw-cntrast graphics are less likely t cause uneven aging f the screen; Stck market stickers: presented at the bttm f the TV screen; Shpping channel lgs and pricing displays: bright and shwn cnstantly r repeatedly in the same lcatin n the TV screen. Examples f still pictures als include lgs, cmputer images, time display, teletext and images displayed in 4:3 mde, static images r characters, etc. Tip:reduce cntrast and brightness when viewing. Carefully pay attentin t these remarks. The warranty des nt apply t damage caused by nt taking int accunt the abve mentined warnings n statinary images. Electric, Magnetic and Electrmagnetic Fields ( EMF ) Philips Ryal Electrnics manufactures and sells many prducts targeted at cnsumers, which, like any electrnic apparatus, in general have the ability t emit and receive electrmagnetic signals. One f Philips leading Business Principles is t take all necessary health and safety measures fr ur prducts, t cmply with all applicable legal requirements and t stay well within the EMF standards applicable at the time f prducing the prducts. Philips is cmmitted t develp, prduce and market prducts that cause n adverse health effects. Philips cnfirms that if its prducts are handled prperly fr their intended use, they are safe t use accrding t scientific evidence available tday. Philips plays an active rle in the develpment f internatinal EMF and safety standards, enabling Philips t anticipate further develpments in standardisatin fr early integratin in its prducts. Pixel characteristics Yur TV display is made with high-precisin technlgy with a high number f clur pixels. Althugh it has effective pixels f 99,999% r mre, black dts r bright pints f light (red, green r blue) may appear cnstantly n the screen.this is a structural prperty f the display (within cmmn industry standards) and is nt a malfunctin. 2

3 Y Pb G AUDIO L/R DIGITAL COMMON INTERFACE HDMI 1 HDMI 2 ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO EXT3 EXT2 B V EXT1 Pr R H _en.qxd :13 Pagina 3 Getting started Befre yu start Warning: d nt insert the mains crd int the mains at the bttm f the TV and in a wall scket r hang the TV n the wall befre all cnnectins are made. Befre yu switch n yur TV, cnnect all yur peripheral equipment. See T make vide and audi cnnectins, p. 43. Overview f the rear cnnectr panel There is a wide range f audi and vide equipment that can be cnnected t yur TV. See T make audi and vide cnnectins, p. 43. Y Pb Pr G AUDIO L/R B V R H EXT3 EXT3 EXT2 EXT1 EXT2 EXT1 COMMON INTERFACE HDMI ANTNA COMMON INTERFACE HDMI 1 DIGITAL HDMI 2 ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO DIGITAL AUDIO IN AUDIO OUT EXT1 can handle CVBS, RGB and Audi L/R; EXT2 can handle CVBS, S-VIDEO, RGB,Audi L/R; EXT3 can handle YPbPr, RGB H/V and Audi L/R; HDMI 1 and 2. Supprted vide frmats: 480i, 480p, 576i, 576p, 720p, 1080i. Warning: discnnect all pwer surces befre making any cnnectins. Tip: it is preferable t cnnect peripherals with RGB utput t EXT1 r EXT2 as RGB prvides a better picture quality. 3

4 _en.qxd :13 Pagina 4 Getting started (Cntinued) Overview f the side cnnectr panel -T cnnect a camera, camcrder r game, see T make vide and audi cnnectins, p. 44. USB -T cnnect a headphne, see T make vide and audi cnnectins, p T cnnect a USB device, see Multimedia brwser, p. 37. Cnnect the antenna < Insert the aerial plug firmly int the aerial scket x at the bttm f the TV. Tip:fr best quality use the suppressr cable supplied. Cnnect the mains < Insert the mains crd supplied int the mains at the bttm f the TV and in the wall scket. Warning:verify that the mains supply vltage crrespnds t the vltage printed n the sticker at the rear f the TV. UK - EIRE Remte cntrl < Insert the 2 batteries supplied (Type R6-1,5V). Be sure the (+) and (-) ends f the batteries line up crrectly (inside f case is marked.) Fr mst keys pressing a key nce will activate the functin. Pressing a secnd time will de-activate it. 4

5 _en.qxd :13 Pagina 5 Use f the remte cntrl RC4401/01 B Standby Press t switch the TV frm r t standby mde. When switched t standby, a red indicatr n the TV lights up. Attentin: the TV is never pwered ff cmpletely unless it is physically unplugged. TV Press t select TV mde. DVD STB VCR AUX Press ne f these keys t set yur remte cntrl t perate a peripheral device. See Audi and Vide equipment keys, p. 54. a DEMO Press t switch the Dem menu n r ff. Clur keys - When functins are attached t the clur keys, the clur keys are shwn n screen. -T select a page in Teletext mde. OPTION -T pen and clse the Quick access menu which cntains a few frequently used ptins, like Picture frmat. - When in teletext, press repeatedly t enlarge the teletext page display. See Teletext, p. 41. at pen and clse the Electrnic Prgramme Guide. See EPG (Electrnic Prgramme Guide), p. 35. Cursr keys Press the cursr keys up/dwn, left/right t navigate thrugh the menus. v OK - T activate a setting - Starts playing cntent in the Multimedia Brwser applicatin. BROWSE/MU: T pen and clse the main menu. See Hw t navigate thrugh the menus, p. 11. bteletext On/Off Press t switch teletext n. See Teletext, p. 40. Only fr UK: Digital text/interactive services. Attentin: nt all channels transmit interactive televisin applicatins at all times. V Vlume Press + r - t adjust the vlume. Mute key: interrupt the sund r restre it. 5

6 _en.qxd :13 Pagina 6 Use f the remte cntrl RC4401/01 (Cntinued) +P- Channel selectin - t brwse thrugh the TV channels and surces stred and marked in the Favurite channels lists; - t select a page in Teletext mde; - t quickly brwse thrugh the lists in the menus; - t switch the TV n frm standby mde. 0/9 Digit keys T select a TV channel between 0 and 999. AV Select yur peripherals See Installatin menu, Select yur cnnectins, p. 32. a 0 Previus channel Press t alternate between the currently viewed and the previusly viewed TV channel. Ambilight-MODE Ambilight:Press t switch Ambilight On r Off. Fr the Ambilight settings, see Use f the settings, Enjy Ambilight, p. 20. MODE: Press this key repeatedly t tggle thrugh the Ambilight mdes. Nte: when the TV is switched t standby, and yu switch Ambilight On,Ambilight will be active. Only then less mdes are available. Ò π Audi and Vide equipment keys See Audi and Vide equipment keys, p. 54. See Multimedia brwser functinal keys, p. 39. v CANCEL Only fr UK: Digital text/interactive services. Press this key t cancel thse special services (and the functin bar at the bttm f the screen). n functin ion screen infrmatin Press t display (when available) infrmatin abut the selected TV channel and prgramme. bdual screen Press the b key t shw teletext n the right f the screen. FAV T display the channels list. Yu can create up t fur favurite lists. 6

7 _en.qxd :13 Pagina 7 Use f the OPTION key The OPTION key allws yu t display the Quick access menu which will give yu direct access t sme features and menu ptins. 1. Press the OPTION key. > The Quick access menu appears. 2. Press the cursr up/dwn t select a menu item. 3. Press the OK key t jump t the selected menu item in the. (Except fr the Clck ptin). 4. Use the cursr keys t make a selectin. 5. Press the OPTION key t exit. Quick access Digital audi language Digital subtitle language Subtitles Picture frmat Equalizer Clck a Nte: digital related menu items will nly be accessible in case f digital TV bradcasting. Digital audi language: See Adjust sund menu settings, p. 18. Digital subtitle language: See Adjust feature menu settings, p. 23. Subtitles: See Adjust feature menu settings, p. 23. Picture frmat: See Use f the settings,adjust picture menu settings, p. 17. Equalizer: See Use f the settings,adjust sund menu settings, p. 18. Clck: < Select t activate/deactivate the clck display n the screen. Keys at the right side f the TV In case yur remte is lst r brken, apart frm channel selectin and vlume adjustment, yu can still change sme f the basic settings with the keys at the side f yur TV. < Press the pwer switch B t switch the TV n r ff. VOLUME MU PROGRAM/CHANNEL B The MU key can be used t summn the withut the remte cntrl. < Use the VOLUME - and + keys and the PROGRAM/CHANNEL - and + keys t select menu items. 7

8 _en.qxd :13 Pagina 8 Intrductin: Digital TV Besides traditinal analgue bradcasts, yu can als receive digital bradcasts via a rf r lft munted digital antenna in cuntries where thse signals are available and which are supprted by this TV.Verify if the cuntry yu are nw lcated and yu have selected during the installatins (see further), supprts digital vide bradcasting via antenna. See fr the list f supprted cuntries r cnsult yur lcal dealer r see the sticker at the back f yur TV. Nte:fr digital TV channels via a cable cnnectin, yu will need an extra set tp bx decder; fr digital TV channel via satellite, a satellite tuner and dish munted utdrs are required.als certain internet prviders ffer digital TV channels via bradband internet and a settp bx. Switch the TV n < Press the pwer switch B at the side f the TV. > An indicatr n the frnt f the TV lights up and the screen cmes n. < If the TV is in standby mde, press the -P+ keys r the B key n the remte cntrl. Nte: the first time (and nly the first time) yu switch n yur TV, yu see a Welcme screen fllwed by the installatin prcedure. See First time installatin, p. 9. First time installatin The installatin prcedure cnsists f a series f screens that will guide yu thrugh the installatin f yur TV. Fllw the instructins n screen. Nte: if the TV has already been installed befre and/r yu want t change the First time installatin settings, prceed with Use f the settings, p

9 _en.qxd :13 Pagina 9 First time installatin (Cntinued) Step 1: select yur n-screen language After the Welcme screen yu are asked t select a language f the TV's n-screen menus.the text f the header and the inf n screen cntinuusly change language.als the digital audi and subtitle language will be set t the selected menu language. 1. Press the cursr up/dwn t highlight yur language. 2. Press the OK key n the remte cntrl. 3. Fllw the instructins n screen t prceed. a Step 2: cmplete the initial TV installatin prcedure 1. Press the green clur key n yur remte cntrl when Televisin is highlighted. 2. Select the cuntry where yu are nw lcated. Please select yur language... PHILIPS using cursr up and dwn Next Menu language English Españl Français Hrvatski Italian Magyar... PHILIPS Installatin This will help yu t install the fllwing sectins: Televisin Settings assistant Previus Next Skip Stp Ntes: - if yu select a wrng cuntry, the channel numbering will nt be accrding t the standard fr yur cuntry. - in case the cuntry selected is nt DVB-T supprted by yur TV, digital related menu-items will nt be accessible. 3. Press the green clur key n yur remte cntrl t start the Autmatic channel installatin. > All available digital TV and radi channels and analgue TV channels are searched fr and stred autmatically. This will take a few minutes.when the search is cmplete, the menu will indicate the number f digital and analgue channels fund. Ntes: -receptin f digital terrestrial TV channels is applicable dependent n the cuntry selected; - if yu chse t install the channels at a later time, select the Autmatic installatin in the, Installatin, Channels t scan available channels. 4. Press the red clur key again when the search is cmpleted. PHILIPS Televisin System searching: please wait... Digital channels fund 16 Analgue channels fund 22 Stp 9

10 _en.qxd :13 Pagina 10 First time installatin (Cntinued) Step 3: Settings assistant: select yur TV settings PHILIPS Installatin This will help yu t cmplete the Settings assistant. Televisin Settings assistant Previus Next Skip Stp PHILIPS Settings assistant Please select yur lcatin befre cntinuing: Hme Shp By means f several split screens/full screens yu are prmpted t select yur preferred picture, sund and ambilight settings, t finally arrive at a cmplete setting which satisfies yu. 1. Press the green clur key n yur remte cntrl t enter the Settings assistant menu. 2. Select yur Lcatin with the cursr up/dwn. > If yu chse Shp it will skip the Settings assistant. The TV parameters fr Picture, Sund and Ambilight will then be set t predefined fixed settings. Press the green clur key again t prceed. > If yu chse Hme it will display the Settings assistant. 3. Use the cursr left/right t each time select yur preferred screen. 4. Press the green clur key t each time cnfirm yur selectin and t jump t the fllwing screen. > The fllwing items will be presented sequentially. In the header it is mentined hw many screens have been cmpleted and hw many screens there are in ttal. The Settings assistant will step sequentially thrugh the fllwing settings: Picture, Sund and Ambilight. 5. Press the green clur key again t stre all the settings and t return t the TV installatin menu. Nte: when yu skip r stp the Settings Assistant, then the standard settings Philips selected fr yu will be chsen. 6. Press the red clur key again t finish the First time installatin prcedure and t display the first stred TV channel. Nte:any time yu can change r reset yur settings r adjust individual settings fr Picture, Sund and Ambilight in the TV settings menu. See p. 13, Use f the settings. T cntrl the settings f special TV functins, features and accessry equipment, see p. 23, Adjust feature menu settings. 10

11 _en.qxd :13 Pagina 11 Hw t navigate thrugh the menus Intrductin A lt f guiding instructins, help texts and messages will be displayed n yur TV when yu use the menus r when yu try t execute an actin. Read the help texts which are being displayed n the specific item highlighted. The clur keys at the bttm f the screen refer t the different actins which may be executed. Press the crrespnding clur key n the remte cntrl t perfrm the required r desired actin. a Nte: digital related menu items will nly be accessible in case f digital TV bradcasting. Televisin Multimedia TV settings Features Installatin Channel list Prgramme guide TV settings Settings assistant Reset t standard Picture Sund Ambilight 1. Press the MU/BROWSE key n the remte cntrl. > The main menu appears n the screen. - allws yu t access the. See belw. - Channel list allws yu t access the TV channel list and t create up t fur favurite lists with yur preferred TV channels and digital radi statins. See Create yur favurite channel list, p Prgramme guide allws yu t access detailed infrmatin abut individual digital TV prgrammes. Accrding t the type f Electrnic Prgramme Guide, it als allws yu t access the table f scheduled Digital TV prgrammes and easily select and tune t a desired prgramme. See EPG, Electrnic Prgramme Guide, p Multimedia allws yu t access the Multimedia brwser applicatin. It lets yu display yur persnal multimedia files. Multimedia is nly present when a USB device is cnnected. See Multimedia brwser, p Use the cursr up/dwn t highlight and select a menu item. 3. Use the cursr right t enter the highlighted menu item. > The right panel shws the cntent f the highlighted menu item. Inf 11

12 _en.qxd :13 Pagina 12 Hw t navigate thrugh the menus (cntinued) TV settings Features Installatin Inf TV settings Settings assistant Reset t standard Picture Sund Ambilight 4. Use the cursr up/dwn t select a menu item. - TV settings allws yu t adjust yur preferred picture, sund and ambilight settings - Features allws yu t cntrl the settings f special TV features - Installatin allws yu - t select yur language preferences; - t search fr and stre yur TV channels; - t set r adjust varius special functins; - t select cnnected peripheral equipment; - t define ne r mre channel numbers as decder channel numbers; - t reset yur picture, sund and ambilight settings t the factry standard settings; - t upgrade yur TV sftware 5. Press the cursr right t enter the highlighted menu item. > The cntent f the right panel is mved t the left panel and the right panel nw shws the cntent f the newly highlighted item in the left panel. Nte: in sme cases it is imprtant that the picture can be watched while yu adjust the settings.this means that when the highlight is n the right side panel, the ther menu items hide away.when the cursr left is pressed, the hidden menu items reappear and the highlight mves t the left panel. 6. Press the MU/BROWSE key t exit the main menu. 12

13 _en.qxd :13 Pagina 13 Use f the settings Televisin Multimedia Channel list Prgramme guide The allws yu t access and change settings and preferences in case yu want t change the First time installatin settings and/r yu want t cntrl the settings f special TV functins, features and peripheral equipment. TV settings Features Installatin Inf TV settings Settings assistant Reset t standard Picture Sund Ambilight Adjust viewing and listening settings 1. Press the MU/BROWSE key n the remte cntrl. > The main menu appears n the screen. 2. Select and press the cursr right. > The is displayed. 3. Select TV settings and press the cursr right. > The TV settings menu is mved t the left. 4. Press the MU/BROWSE key t exit the menu. T make it easier t change the settings f the TV, there are 3 ways f ding it. A. Change settings in an easy-t-use manner with the Settings assistant Each time yu've made a selectin, press the green key t cnfirm yur selectin. 1. Select Settings assistant and press the cursr right. > By means f several split screens/full screens yu are prmpted t select yur preferred picture, sund and ambilight settings t finally arrive at a cmplete setting which satisfies yu. See First time installatin, Step 3: Settings assistant: select yur TV settings, p Press the green clur key t return t the again. 13

14 _en.qxd :13 Pagina 14 Use f the settings (cntinued) TV settings Settings assistant Reset t standard Picture Sund Ambilight Inf Reset t standard Current Natural Vivid Subtle B. Use f the Standard settings (if present) This allws yu t reset yur settings fr viewing and listening t predefined factry settings. 1. Select Reset t standard and press the cursr right. > A menu appears which allws yu t select ne f the standard settings fr viewing and listening. > Current shws yur current settings fr viewing and listening. > If yu select Natural, it allws yu t set yur picture, sund and ambilight settings t the recmmended standard values. In mst cases this will give the best balanced viewing experience. > If yu select Vivid, it allws yu t set yur picture, sund and ambilight settings t rich values, making use f the TV capabilities t its full extend. > If yu select Subtle, it allws yu t set yur picture, sund and ambilight settings t the purest representatin f the riginal surce cntent. 2. Press the green clur key t stre the selected setting. C. Individual settings fr picture, sund and ambilight < Select Picture, Sund r Ambilight and press the cursr right. > A menu appears which allws yu t fine tune the picture, sund and ambilight settings. > T adjust the Picture settings, see Adjust picture menu settings, p. 15. > T adjust the Sund settings, see Adjust sund menu settings, p. 18. > T adjust the Ambilight settings, see Enjy Ambilight, p

15 _en.qxd :13 Pagina 15 Adjust picture menu settings TV settings Features Installatin Inf TV settings Settings assistant Reset t standard Picture Sund Ambilight Inf TV settings Settings assistant Reset t standard Picture Sund Ambilight Picture Cntrast Brightness Clur Hue Sharpness Tint... The picture menu cntains the settings that affect the quality f the picture. 1. Press the MU/BROWSE key n the remte cntrl. > The main menu appears. 2. Select and press the cursr right. > The is mved t the left. 3. Select TV settings and press the cursr right. > The TV settings menu is mved t the left panel. 4. Select Picture and press the cursr right. > The Picture menu is mved t the left panel. 5. Use the cursr up/dwn t select the Picture menu items. 6. Press the cursr right t enter the selected Picture menu item. Nte: all digital related menu items will nly be accessible in case f digital TV bradcasting. 7. Use the cursr keys t adjust the settings. 8. Press the cursr left t return t the Picture menu. Cntrast Adjusts the intensity f bright parts in the picture but keep the dark parts unchanged. Brightness Adjusts the light utput f the cmplete picture, which will mainly affect the darker areas f the picture. Clur Adjusts the saturatin level f the clurs t suit yur persnal preference. Hue Cmpensates fr the clur variatins in NTSC encded transmissins. Sharpness Adjusts the sharpness f fine details in the picture. Tint Increases r decreases Warm (red) and Cl (blue) clurs t suit persnal preferences. < Select Cl t give the white clurs a blue, Nrmal t give the white clurs a neutral, Warm t give the white clurs a red tint. < Select Custm t make a custmised setting in the Custm tint menu item. 15

16 _en.qxd :13 Pagina 16 Adjust picture menu settings (Cntinued) TV settings Settings assistant Reset t standard Picture Sund Ambilight Inf Picture... Custm tint Pixel Plus Digital Natural M.. Dynamic cntrast DNR... Custm tint (nly when Tint is set t Custm) Fine tunes the white pint (WP) and black level (BL) f the picture. 1. Select Custm tint and press the cursr right. 2. Use the cursr keys t select and adjust the settings f: R-WP: allws yu t custmise the clur tint by adjusting the red whitepint f the picture. G-WP: allws yu t custmise the clur tint by adjusting the green whitepint f the picture. B-WP: allws yu t custmise the clur tint by adjusting the blue whitepint f the picture. R-BL: allws yu t custmise the clur tint by adjusting the red blacklevel f the picture. G-BL: allws yu t custmise the clur tint by adjusting the green blacklevel f the picture. 3. Use the clur keys t reset t the predefined settings. 4. Press the cursr left t return t the Picture menu. Pixel Plus Pixel Plus is the mst ideal setting, as it fully prcesses the image t make every single pixel the best it can be, imprving cntrast, sharpness, picture depth, and clur reprductin and brilliance frm every surce, including High Definitin. < Select On r Off t activate/de-activate Pixel Plus. Digital Natural Mtin Reduces the field and line flicker and reprduces smth mvement especially in mvies. < Select Off, Minimum r Maximum in rder t really see the difference in picture quality. Dynamic cntrast Autmatically makes the cntrast in the darker and the brighter picture areas mre nticeable as the image n the screen changes. < Nrmally select Medium. It may be preferred t select Minimum, Maximum r Off. DNR DNR autmatically filters ut and reduces the image nise.this imprves picture quality when receiving weak signals. < Select Off, Minimum, Medium r Maximum accrding t the image nise in the picture. 16

17 _en.qxd :13 Pagina 17 Adjust picture menu settings (Cntinued) TV settings Settings assistant Reset t standard Picture Sund Ambilight Inf Picture... DNR MPEG artefact red. Clur enhancem.. Active cntrl Light sensr Picture frmat MPEG artefact reductin MPEG artefact reductin On smthens the transitins n digital cntent. < Select On r Off. Clur enhancement Autmatically cntrls green enhancement and blue stretch. It makes the clurs mre vivid. < Select Off, Minimum, Medium r Maximum. Active cntrl The TV cntinuusly measures and crrects all incming signals in rder t prvide the best picture pssible. < Select On r Off t activate/de-activate Active cntrl. Light sensr Light sensr On autmatically adjusts the picture and ambilight settings fr best viewing dependent n the lighting cnditins in the rm. < Select On r Off. Picture frmat This allws yu t adjust the size f the picture dependant n the bradcasted frmat and yur preferred setting. Tip: this functin is als accessible via the OPTION key n the remte cntrl. Aut frmat Super zm 4:3 Mvie expand 14:9 Mvie expand 16:9 Wide screen Hw t navigate thrugh the TV settings menu, see p. 12: Use f the settings. Chse amng the fllwing picture frmats:aut frmat, Super zm, 4;3, Mvie Expand 14:9, Mvie Expand 16:9 r Wide screen. Aut frmat makes the picture fill the screen as much as pssible. In case f subtitles in the bttm black bar,aut frmat makes the subtitles visible. In case f a bradcaster lg in the crner f the tp black bar, the lg disappears frm the screen. Super zm remves the black bars n the sides f 4:3 prgrammes with minimal distrtin. When in Mvie Expand 14:9, Mvie Expand 16:9 r Super zm screen frmat, yu can make subtitles visible with the cursr up/dwn. Nte: with HD surces nt all picture frmats will be available. 17

18 _en.qxd :13 Pagina 18 Adjust sund menu settings TV settings Settings assistant Reset t standard Picture Sund Ambilight Inf Sund Equalizer Vlume Balance Digital audi lang.. Dual I/II Mn/Stere... The sund menu cntains the settings that affect the quality f the sund. 1. Press the MU/BROWSE key n the remte cntrl. > The main menu appears. 2. Select and press the cursr right. > The TV Menu is mved t the left. 3. Select TV settings and press the cursr right. > The TV settings menu is mved t the left panel. 4. Select Sund and press the cursr right. > The Sund menu is mved t the left panel. 5. Use the cursr up/dwn t select the Sund menu items. 6. Press the cursr right t enter the selected Sund menu item. Nte: dependent n the input signal, ne r mre menu items may nt be selectable. Manufactured under license frm Dlby Labratries. Dlby Pr Lgic and the duble-d symbl are trademarks f Dlby Labratries. 7. Use the cursr keys t adjust the settings. 8. Press the cursr left t return t the Sund menu. Equalizer Allws yu t change the frequency respnse f the sund t match yur persnal taste. Tip: this functin is als accessible via the OPTION key n the remte cntrl. Vlume Allws yu t adjust the sund utput level. Balance Allws yu t adjust the utput f the right and left speakers t btain the best stere reprductin fr yur listening psitin. Digital audi language (nly with Digital TV bradcasting) Allws yu t select an audi language ut f the list f the available bradcasted languages fr the current digital prgramme. Nte: if there is mre than ne variant fr an audi language, then select ne f the variants. T permanently change the audi language, use the Language menu in the Installatin menu. Tip: this functin is als accessible via the OPTION key n the remte cntrl. 18

19 _en.qxd :13 Pagina 19 Adjust sund menu settings (Cntinued) TV settings Settings assistant Reset t standard Picture Sund Ambilight Inf Sund... Mn/Stere Surrund mde Headphne vlume AVL Delta vlume Aut surrund Dual I/II Allws yu t select, per channel, Dual I r II, when dual sund transmissin is available. Mn/Stere Allws yu t select, per TV channel, Mn r Stere sund when stere bradcasts are available. Surrund mde Allws yu t select the mdes fr mre spatial r surrund sund reprductin dependent n the bradcasted signals r signals frm external inputs received. Headphne vlume Allws yu t cntrl the level f sund thrugh the headphnes. AVL (Autmatic Vlume Leveler) Autmatically reduces the vlume differences between channels and prgrammes, prviding a mre cnstant verall level.this will als reduce the dynamics f sund. Delta vlume Allws yu t crrect fr any permanent vlume differences between TV channels r external surces. Aut surrund When switched On, this allws the TV t autmatically switch t the best surrund sund mde the bradcaster transmits. 19

20 _en.qxd :13 Pagina 20 Enjy Ambilight TV settings Settings assistant Reset t standard Picture Sund Ambilight Inf Ambilight Ambilight Brightness Mde Clur Custm clur Separatin... The ambilight menu cntains the settings fr cntrlling the ambient lighting. Using ambient light gives a mre relaxed viewing experience and imprves perceived picture quality. Analysis f the picture cntent adapts the clurs cntinuusly. But the lights can als be set t any fixed clur and many shades f white. Tip: in standby mde the lights can be set/perated t any clur and create a unique ambiance in the rm. See Ambilight in standby mde, p Press the MU/BROWSE key n the remte cntrl. > The main menu appears. 2. Select and press the cursr right. > The TV Menu is mved t the left. 3. Select TV settings and press the cursr right. > The TV settings menu is mved t the left panel. 4. Select Ambilight and press the cursr right. > The Ambilight menu is mved t the left panel. 5. Use the cursr up/dwn t select the Ambilight menu items. 6. Press the cursr right t enter the selected Ambilight menu item. 7. Use the cursr keys t adjust the settings. 8. Press the cursr left t return t the Ambilight menu. Ambilight Allws yu t switch the lights On r Off at the rear f the TV. < Select Off t switch ff the ambient lights and dwnlight all ther ambilight menu items. < Select On t switch n the ambient lights. Refine the light settings in the menus belw. Brightness Allws yu t adjust the light utput f the ambilights. 20

21 _en.qxd :13 Pagina 21 Enjy Ambilight (Cntinued) TV settings Settings assistant Reset t standard Picture Sund Ambilight Inf Ambilight... Mde Clur Custm clur Separatin Balance Mde Allws yu t chse fr cnstant backgrund lighting r fr backgrund lighting that matches the images displayed n the screen. < Use the cursr keys t select Clur, Relaxed, Mderate r Dynamic. - Clur: this will shw cnstant light accrding t the settings in the Clur menu belw. It allws manual fine tuning in the next Ambilight menu items. - The ptins Relaxed, Mderate r Dynamic will dynamically match brightness and clur t the screen cntent.the selectin made will effect the speed which determines the viewing impressin. Fr example: - in Relaxed mde, the rate f brightness and clur change, as predefined in the factry, is smthly and sft which gives yu an immersive yet relaxed viewing. - in Mderate mde the rate f brightness and clur change can be experienced as between Relaxed and Dynamic. - in Dynamic mde the rate f brightness and clur change is mre quick and dynamic.this gives yu full immersin and invlvement with the screen cntent. Ntes: - the rate f change is limited, as nt t cause uncmfrtable sensatins; - accrding t the selectin made, sme Ambilight menu items will be dwnlighted and can nt be selected. Clur Nte: nly available when Clur has been selected in the Mde menu abve. Allws yu t select r adjust the clur f the light t yur wn persnal chice. - Warm white is matched t that f mst nrmal lightbulbs. Select this setting if yu want the Ambilight t fit best with nrmal living rm lighting. - Cl white is matched t that f nrmal daylight (6500K). Select this setting if yu prefer mre cl lighting. Nte: the 6500K is the SMPTE recmmended setting fr ambient backlighting f displays. - Blue:preferred by mst cnsumers t create a cl, mdern and/r mystical atmsphere. Select this setting accrding t yur persnal taste r md. - Red:preferred by mst cnsumers t create a csy, special atmsphere. Select accrding t yur persnal taste r md. - Custm: select if yu want t custmise the ambilight clur. 21

22 _en.qxd :13 Pagina 22 Enjy Ambilight (Cntinued) TV settings Settings assistant Reset t standard Picture Sund Ambilight Inf Ambilight... Mde Clur Custm clur Separatin Balance Custm clur Nte: nly available when Custm has been selected in the Clur menu. Allws yu t custmise the ambilight clur. < Select Palette t select the general clur f the light utput. < Select Saturatin t adjust the clurfulness f the light. Separatin Allws yu t define the stere effect in case, Relaxed, Mderate r Dynamic has been selected in the Mde menu. < Select Off fr a mn behaviur which means that all lamps will behave equally. < Select Minimum, Medium r Maximum t define the Ambilight stere effect spread ver the available lamps. Balance Allws yu t adjust the clur and level f light intensity n the left and right side f the picture. Ambilight in standby mde When the TV is switched ff, the ambient lights will als be switched ff.when the TV is in standby mde, ambilight can be used t prvide a unique ambience fr the rm. < Press the Ambilight key n the remte cntrl t switch between Ambilight On r Off. See Use f the remte cntrl, p. 6. < Press the MODE key repeatedly t tggle thrugh the Ambilight mdes. Nte: when the TV is switched t standby, and yu switch Ambilight On, then less Ambilight mdes are available. Cautin: Infrared interference T avid bad infrared remte cntrl receptin, place yur peripheral equipment ut f sight f the ambient lights f yur TV. Ambilight des nt functin well when the rm temperature is less than 59 F/15 C. 22

23 _en.qxd :13 Pagina 23 Adjust feature menu settings TV settings Features Installatin Inf Features Subtitle Digital subtitle lan.. Sleeptimer Childlck Set/Change cde On timer... The Features menu allws yu t cntrl the settings f special TV functins, features and accessry equipments. 1. Press the MU/BROWSE key n the remte cntrl. > The main menu appears. 2. Select and press the cursr right. > The TV Menu is mved t the left. 3. Select Features and press the cursr right. > The Features menu is mved t the left panel. 4. Use the cursr up/dwn t select the Features menu items. 5. Press the cursr right t enter the selected Features menu item. 6. Use the cursr keys t adjust the settings. 7. Press the cursr left t return t the Features menu. Subtitle This displays Teletext and DVB-T subtitles frm the selected TV channel.these can be permanently displayed, r nly when mute is active.the teletext subtitle page f analgue channels must be stred fr each TV channel. 1. Switch n teletext and select the prper subtitle page frm the index. 2. Switch ff teletext. 3. Select - Subtitle On t display the subtitles n the selected TV channels. - On during mute t autmatically display the subtitles nly when the sund has been muted with the key n the remte cntrl. Tip: this functin is als accessible via the OPTION key n the remte cntrl. Digital subtitle language (nly with Digital TV bradcasting) This allws yu t (temprarily) select yur preferred subtitle language ut f the list f the bradcasted languages fr the current prgramme. Nte: t permanently change the subtitle languages, use the Language menu in the Installatin menu. < Use the cursr up/dwn t temprarily verrule yur permanent language selectin and cnfirm with the OK key. Tip: this functin is als accessible via the OPTION key n the remte cntrl. 23

24 _en.qxd :13 Pagina 24 Adjust feature menu settings (Cntinued) TV settings Features Installatin Inf Features... Sleeptimer Childlck Set/Change cde On timer Cmmn interface Dem Sleeptimer This sets a time perid after which the TV autmatically switches t standby. 1. Select Sleeptimer. 2. Press the cursr right. 3. Select a value with the cursr up/dwn. > The list will have values frm 0 t 180 minutes.when 0 is selected, the sleeptimer is switched ff. Nte:yu can always switch ff yur TV earlier r select anther time set. Childlck With a 4-digit cde, yu are able t lck TV channels and external surces t prevent children frm watching certain prgrammes. 1. Select Childlck. 2. Press the cursr right t enter the Childlck menu. 3. Enter yur 4-digit cde. Nte:yu have t re-enter yur cde each time yu enter the Childlck menu. 4. Select ne f the menu items f the Childlck menu and press the cursr right: - Lck t lck all channels and externals: - Custm lck t lck a certain prgramme r t lck all the channels frm a certain time. < Select: - Lck after t lck all prgrammes frm a certain time nwards. < Press the cursr right twice. < Select On t set the lck. < Press the cursr left. < Select Time and press the cursr right. < Enter the time with the cursr up/dwn and right. - Channel lck t lck a certain TV channel r external. < Press the OK key t activate/deactivate. - Parental rating t set an age rating t a digital prgramme if the prgramme is parental rated.the ratings applied are accrding the selected cuntry in the initial installatin. < Press the cursr right and select an age rating with the cursr up/dwn. - Select Unlck t disable all lcks yu have set. Imprtant: yu have frgtten yur cde! 1. Select Change cde and press the cursr right. 2. Enter the verriding cde Enter a new persnal 4-digit cde. 4. Cnfirm yur new entered cde. > The previus cde is erased and the new cde is stred. 24

25 _en.qxd :13 Pagina 25 Adjust feature menu settings (Cntinued) TV settings Features Installatin Inf Features... Sleeptimer Childlck Set/Change cde On timer Cmmn interface Dem Set cde/change cde This allws yu t set r change the persnal 4-digit access cde that is used in the different lck functins f the TV. < Select Set r Change cde. > If n PIN-cde exists yet, the menu item is set t Set cde.fllw the instructins n screen. > If a PIN-cde has previusly been entered, the menu item is set t Change cde.fllw the instructins n screen. < Enter yur cde with the digit keys.all number cmbinatins frm 0000 t 9999 are valid numbers. > The Features menu reappears with a message cnfirming that yur PIN-cde has been created r changed. On timer Frm standby, this autmatically switches the TV t the specified channel number, at a specified time. 1. Select On timer. 2. Press the cursr right t enter the On timer menu. 3. Select Timer and press the cursr right. 4. Select On. 5. Select Channel and then the TV channel yu want yur TV t switch t n a selected time and day 6. Select Day and then a day f the week r select Daily. 7. Select Time and enter the time with the digit keys r with the cursr up/dwn. 8. Press the OK key t activate. 9. Press the cursr left t return t the Features menu r press the MU/BROWSE key t switch ff the menu. Nte:Frm nw n, every week,yur TV will autmatically switch t the selected channel, n the selected day, at the selected time, until the On timer functin is switched ff again. Nte: nly ne On timer can be set. 25

26 _en.qxd :13 Pagina 26 Adjust feature menu settings (Cntinued) TV settings Features Installatin Inf Features... Sleeptimer Childlck Set/Change cde On timer Cmmn interface Dem Cmmn interface Nte: this functinality is nly available in certain cuntries. This allws yu t access cmmn interface applicatins defined by the service prvider f the Cmmn Interface (CI) mdule. The Cmmn Interface (CI) mdule can cntain ne r mre applicatins, which are used t cmmunicate with the CI service prvider and prvide sme additinal facilities t the user. See Use the Cmmn Interface slt, p. 52. Nte: this menu item and the cmmn interface applicatins are nly selectable when an authenticated Cmmn Interface card is present and sme Cmmn Interface card user interface sessins are listed. The CI service prvider is respnsible fr the messages and texts n screen. In case f failure r strange behaviur, yu must call yur CI service prvider. Features Subtitle Dig. subtitle langu. Sleeptimer Childlck Set/Change cde On timer Cmmn interface Dem Inf Dem Pixel Plus Ambilight Settings assistant Active cntrl Dem This allws yu t get an idea f the features that are part f the televisin. 1. Select Dem. 2. Press the cursr right. 3. Select a desired dem. 4. Press the OK key t start the dem. > The selected dem is played nce. 5. Press the red clur key t stp the dem and t return t the dem menu. 6. Press the red clur key t exit the dem menu. 26

27 _en.qxd :13 Pagina 27 Hw t search fr and stre TV channels Tip:yu will need this chapter nly if yu want t change the installatin settings. Installatin menu Televisin Multimedia TV settings Features Installatin Inf Channel list Prgramme guide Installatin Languages Cuntry Time zne Channels Preferences Cnnectins... This menu will adjust settings related t the installatin f the TV channels, language and cuntry and t the initial installatin f yur TV. 1. Press the MU/BROWSE key n the remte cntrl. > The main menu appears. 2. Select and press the cursr right. > The TV Menu is mved t the left. 3. Select Installatin and press the cursr right. > The Installatin menu is mved t the left panel. 4. Use the cursr up/dwn t select the Installatin menu items. 5. Press the cursr right t enter the selected Installatin menu item. 6. Use the cursr keys t make a selectin. 7. Press the OK key t activate r t cnfirm. 8. Press the cursr left t return t the Installatin menu r press the MU/BROWSE key t switch ff the menu. Installatin Languages Cuntry Time zne Channels Preferences Cnnectins Decder... Inf Languages Menu language Preferred audi l... Preferred subtitle... Hearing impaired Select yur language preferences This menu allws yu t select yur preferred language fr menu, audi and subtitle. Menu language This allws yu t select yur menu language ut f the list f the available languages. Preferred audi language (nly with Digital TV bradcasting) This allws yu t select yur audi language preference in case several languages are bradcasted. Preferred subtitle language (nly with Digital TV bradcasting) This allws yu t select yur subtitle language preference in case several languages are bradcasted. Hearing impaired (nly with Digital TV bradcasting) This allws yu t select the hearing impaired audi r subtitle language. When set t On, the Hearing impaired versin f yur preferred audi r subtitle language will, if available, be reprduced. When set t Off, the nrmal audi and subtitle language behaviur will be applicable. 27

28 _en.qxd :13 Pagina 28 Hw t search fr and stre TV channels (Cntinued) TV settings Features Installatin Inf Installatin Languages Cuntry Time zne Channels Preferences Cnnectins... Select yur cuntry This allws yu t select the cuntry where yu are nw lcated. Ntes: - if yu select a wrng cuntry, the channel numbering will nt be accrding t the standard fr yur cuntry; - in case the cuntry selected is nt DVB-T supprted by yur TV, digital related menu-items will nt be accessible. Select the time zne (nly with Digital TV bradcasting) Only applicable fr certain cuntries and dependent n the selected cuntry. This allws yu t select yur lcal time zne s that the clck display shws the crrect time. Stre TV and radi channels Installatin Languages Cuntry Time zne Channels Preferences Cnnectins Decder... Inf Channels Autm. installatin Installatin update Digital: test recept.. Analgue: manual.. Rearrange After language and cuntry are set crrectly, yu can nw search fr and stre the TV channels. < Select Channels in the TV, Installatin menu. Autmatic installatin The TV will scan the entire frequency spectrum based n the selected cuntry. > All available digital and analgue TV and digital radi channels are searched fr and stred autmatically. This will take a few minutes. > When the search is cmplete, the menu will indicate the number f digital and analgue channels fund. Installatin update This allws yu t autmatically tune t and update all available channels. Ntes: - this will nt reinstall uninstalled channels; -new channels fund will nt be added t any favurite list; - already installed channels will nt be renumbered. 28

29 _en.qxd :13 Pagina 29 Hw t search fr and stre TV channels (Cntinued) Installatin Languages Cuntry Time zne Channels Preferences Cnnectins Decder... Inf Channels Autm. installatin Installatin update Digital: test recept.. Analgue: manual.. Rearrange Digital: test receptin (nly with Digital TV bradcasting) This allws yu t see the quality and the strength f the signal receptin fr a digital frequency.this enables yu t find the antenna psitin that gives the best receptin. < Select Digital: test receptin and press the cursr right. > Yu btain an indicatin f the actual channel frequency, the netwrk name, the signal quality and strength. > If the signal quality and strength is pr, yu can try repsitining the aerial. Tip: it is hwever advisable t cntact a specialised aerial installer in rder t achieve the best results. Yu can als directly enter the frequency f the digital channels yu want t test. /Installatin Channels Analgue: manual.. Autmatic install... System Installatin update Search Digital: test recept. Fine tune Analgue: manual.. Stre current chan. Rearrange Stre as new chan. Inf Analgue: manual installatin This gives yu the pssibility t manually install (tuning-in channel by channel) analgue channels. Manual installatin will nt find nr stre any DVB-T (digital) channels. 1. Select Analgue: manual installatin and press the cursr right. 2. Select System. 3. Select yur cuntry r part f the wrld where yu are nw lcated. 4. Select Search and press the cursr right. 5. Select the red r green clur key t prceed. Tip: if yu knw the frequency, enter the 3 digits f the frequency with the digit keys 0 t 9 (Fr example, 049). 6. Press the cursr left t stre the channel fund r t search fr anther channel. 7. Select Fine tune and press the cursr right. Fine tuning can be useful when the frequency has shifted a bit r when interference f anther frequency ccurs. Adjust the frequency with the cursr up/dwn in case f pr receptin f the channel fund. 8. Select Stre current channel if yu want t stre the (fine tuned) frequency under the current channel number. Press the cursr right and cnfirm with the OK key. Select Stre as new channel if yu want t stre the (fine tuned) frequency under a new channel number. Press the cursr right and cnfirm with the OK key. 9. Use the rearrange menu t rename r reshuffle the channels. See next page. Nte: when n a frequency where a DVB signal is bradcasted, the tuner will try t decde an analgue TV channel, and hence will nt shw vide. 29

30 _en.qxd :13 Pagina 30 Rearrange the channel number list Installatin Languages Cuntry Time zne Channels Preferences Cnnectins Decder... Inf Channels Autm. installatin Installatin update Digital: test recept.. Analgue: manual.. Rearrange This allws yu t rename, t reshuffle and t uninstall r reinstall the stred channels. < Press the crrespnding clur keys and fllw the n screen instructins. Reshuffle This allws yu t change the rder f the stred TV channels. 1. Select the channel yu want t change place. 2. Press the yellw clur key t mve up a single psitin in the list. 3. Press the blue clur key t mve dwn a single psitin in the list. 4. Repeat t reshuffle ther TV channels. /Installatin Channels Rearrange Autmatic instal... 0 Installatin update 1 Digital: test rec... 2 Analgue: manual 3 Rearrange Inf Rearrange Rename Uninstall Mve up Mve dwn Rename This allws yu t change the name stred in the memry r t assign a name t a channel r external fr which a name has nt yet been entered. 1. Select the channel yu want t rename. 2. Press the red clur key n yur remte cntrl. 3. Select the characters with the cursr up/dwn. Select the fllwing psitin with the cursr right. 4. Press the green clur key r the OK key when finished. Ntes: -press the yellw clur key t delete all characters.the cursr is psitined at the beginning again; -press the blue clur key t delete the character the cursr is psitined. Enter a new character with the cursr up/dwn; - a name can be given t the channel numbers 0 t 999; - space, numbers and ther special characters are lcated between Z and A. 5. Select anther channel number and repeat steps 2 t 5. Uninstall - reinstall This allws yu t uninstall a stred channel s that it is n lnger pssible t tune t.this als allws yu t reinstall an earlier uninstalled channel. 1. Select the channel yu want t uninstall. 2. Press the green clur key t uninstall the selected channel. > The uninstalled channel is indicated in the list by an icn in frnt f the uninstalled channel. 3. Press the green clur key again t reinstall the uninstalled channel. Nte: uninstalled channels are nt reinstalled during an installatin update. 30

31 _en.qxd :13 Pagina 31 Set yur preferences Installatin... Time zne Channels Preferences Cnnectins Decder Factry settings Sftware upgrade Inf Preferences Lcatin Teletext 2.5 OSD Prgramme title This menu cntains items that can set r adjust varius special TV functins and that will typically be accessed nly ccasinally. Select yur lcatin This allws yu t select the lcatin f yur TV. If yu chse fr Shp it will result in fixed settings f picture, sund and ambilight. The lcatin Hme will give full flexibility t change any predefined settings fr picture, sund and ambilight. Select Teletext 2.5 Sme bradcasters ffer the pprtunity t see mre clurs, ther backgrund clurs and nicer pictures in the teletext pages. < Select Teletext 2.5 On t take advantage f this feature. < Select Teletext 2.5 Off if yu like the mre neutral teletext layut. > The selectin made is valid fr all the channels which bradcast Teletext 2.5. Nte: it may take a few secnds befre teletext bradcast switches ver t Teletext 2.5. Select the On Screen Display (OSD) This allws yu t select the display f the vlume bar and a reduced r extended n screen display f prgramme and channel infrmatin. < Select Minimum t activate the display f reduced channel infrmatin. < Select Nrmal t activate the display f extended channel and prgramme infrmatin. Fr example, infrmatin n the prgramme, input signal quality f cnnected peripheral equipment, the screen frmat and sund mde, selected audi language, subtitle language, ratings, remaining time f the sleeptimer setting,... Display a Prgramme title This allws yu, t display the prgramme title accrding t the transmitted infrmatin. > When selected Yes, after the selectin f a TV prgramme r after yu press the i key n the remte cntrl, a prgramme title will be displayed if transmitted. 31

32 _en.qxd :13 Pagina 32 Select yur cnnectins Installatin... Time zne Channels Preferences Cnnectins Decder Factry settings Sftware upgrade Inf Cnnectins EXT1 EXT2 EXT3 HDMI 1 HDMI 2 Side DIGITAL AUDIO IN This allws yu t select the peripheral equipment yu have cnnected t the audi and vide cnnectrs. 1. Select Cnnectins. 2. Press the cursr right. 3. Select the input t which the peripheral equipment is cnnected. > When yu select EXT1, EXT2, EXT3, HDMI 1, HDMI 2, Side r DIGITAL AUDIO IN,a list appears which allws yu t identify which type f peripheral equipment is attached t this input. 4. Press the cursr right again t enter the list f types f peripherals cnnected t the selected input. 5. Select the peripheral equipment with the cursr up/dwn. Digital Audi In If a peripheral equipment has a digital audi utput, yu can cnnect this with a single cable t the TV s DIGITAL AUDIO IN cnnectr. In the Cnnectins menu, assign the DIGITAL AUDIO IN t the crrespnding external input t which yur peripheral equipment is cnnected. In additin t accepting audi input via Digital Audi In, the TV can utput encded Dlby Digital audi via the DIGITAL AUDIO OUT cnnectr t an external amplifier r receiver. If yur amplifier r receiver has a matching cnnectr fr Digital Audi In, yu can cnnect it with a single cable t the TV's DIGITAL AUDIO OUT. See T make vide and audi cnnectins, Cnnect a Hme Cinema amplifier, p. 51. Select a Decder channel number Installatin... Time zne Channels Preferences Cnnectins Decder Factry settings Sftware upgrade Inf Decder Channel Status This allws yu t define ne r mre channel numbers as decder channel numbers when a decder r a descrambler is cnnected t EXT1 r EXT2. 1. Select the channel number under which yu have stred the prgramme that cmes frm yur decder r descrambler. 2. Select Status. 3. Select the input used t cnnect yur decder: Nne, EXT1 r EXT2. < Select Nne if yu d nt want the selected channel number being activated as a decder channel number. 32

33 _en.qxd :13 Pagina 33 Reset the Factry settings Installatin... Time zne Channels Preferences Cnnectins Decder Factry settings Sftware upgrade Inf Factry settings Reset This allws yu t reset mst f the predefined factry states. 1. Select and press the cursr right. 2. Press the OK key t erase settings and reset them t their default values. Hw t upgrade the TV sftware Installatin... Time zne Channels Preferences Cnnectins Decder Factry settings Sftware upgrade Inf Sftware upgrade Current sftw. inf Lcal upgrades Annuncement This allws yu t upgrade yur TV sftware using a USB device. USB device upgrade It is pssible t initiate an upgrade prcedure frm a USB device befre yu start up the TV.The memry device must be filled with the apprpriate upgrade image (and structure) which can be fund n the www. philips.cm/supprt website. Hw t uplad a new sftware versin n yur memry device, see Annex 1, Philips TV sftware upgrade with prtable memry, p. 57. Autmatic sftware annuncement (if present) When yu switch n yur TV a message may appear that a new sftware upgrade is available. < Press the red clur key n yur remte cntrl if yu want t be reminded later n. < Press the green clur key n yur remte cntrl t cnfirm yu have read the message. > Once yu have cnfirmed, the message will nt pp up again. If hwever, yu want t see the last bradcasted annuncement again, select Annuncement in the Sftware upgrade menu. Nte: as lng as the sftware upgrade has nt been executed, the message will be available. 33

34 _en.qxd :13 Pagina 34 Create yur favurite list This allws yu t select up t fur favurite channels lists with yur preferred TV channels and radi statins. Fr example, each member f yur family can create his/her wn favurite list. In additin t the favurite channel lists yu may als select a list with nly digital TV channels r a list with nly the radi channels r a list with nly the analgue channels. Nte: when this key is pressed the first time after yu have finished the installatin, it will bring up the full channel list. In ther situatins it will bring up the last selected channel list. T select a channel frm the displayed favurite list All channels EXT1 EXT2 HDMI A 1 Analgue channel 1 2 Digital channel 1 3 Digital channel 2 4 Radi channel 1 b2 5 Data channel 1 Change list Tune t a channel by pressing OK. Use -P+ fr page up/dwn. All channels All TV channels Radi channels A Analgue Favurites 1 Favurites 2 Favurites 3 b3 Favurites 4 Change list Use cursr up/dwn t select and OK t cnfirm. Favurites 1 EXT1 EXT2 HDMI A 1 Analgue channel 1 2 Digital channel 1 3 Digital channel 2 4 Radi channel 1 b4 5 Data channel 1 Exit Leave edit Press the OK key t mark / unmark. 1. Press the FAV key (r the OK key). > The last selected channel list appears. 2. Use the cursr up/dwn t select a channel. 3. Press the OK key t display the selected channel. T select anther favurite channel list 1. Press the FAV key. > The last selected channel list appears. 2. Press the red clur key t bring up the list f pssible favurite channel lists. 3. Use the cursr up/dwn t select a list. 4. Press the OK key. 5. Press the FAV key again t exit. T create a favurite list r t mdify the list 1. Press the FAV key. > The last selected channel list appears. 2. Press the red clur key. > A list with all pssible favurite channel lists appears. 3. Use the cursr up/dwn t select a Favurites (1 t 4) channel list. 4. Press the OK key. 5. Press the green clur key t enter the Edit mde. > The selected Favurite list will bring up a full channel list. 6. Use the cursr up/dwn t select a channel. 7. Press the OK key t check r uncheck the highlighted channel and t add it t r remve it frm yur selected favurite list. 8a. < Press the green clur key again t leave the Edit mde. > The mdified favurite channel list appears. < Press the FAV key again t exit. > With the P+ key yu will be able t brwse thrugh the TV channels f the selected list. 8b. Press the red clur key t remve the channel list. Nte: with the digit keys yu can still select channels which are nt marked as favurite. 34

35 _en.qxd :13 Pagina 35 Create yur favurite channels list (Cntinued) T select nly TV r nly radi channels n the All channels list When the All channels list is displayed r selected yu may filter the list and select a list with nly the TV channels r a list with nly the radi channels. 1. Press the FAV key. > The last selected channel list appears. 2. Press the cursr left. 3. Select the All channels list and press the cursr right. 4. Press the red clur key t filter. 5. Select yur desired channels list. 6. Press the FAV key again t exit. > With the P+ key yu will be able t brwse thrugh the TV channels f the filtered list. Nte: the filtering will nt be remembered after the TV is switched ff r set t standby. EPG (Electrnic Prgramme Guide) (nly with Digital TV channels) The Electrnic Prgramme Guide shws yu detailed infrmatin abut the current prgramme and als abut the next prgramme (nly fr TV prgrammes that prvide EPG infrmatin). Nte: these instructins may differ accrding t the type f Electrnic Prgramme Guide. a a 1. Press the a key. > The EPG screen appears. Dependent n cnditins it may take sme time t acquire EPG data. > The EPG screen updates autmatically if the EPG data is acquired successfully. If nt, the EPG screen remains blank. > Infrmatin abut the selected prgramme appears. < Use the clured keys t activate the available EPG features displayed at the bttm f the screen. 2. T quit the Prgramme Guide page, press the a key again. When the type f Electrnic Prgramme Guide available, displays a list f TV prgrammes: 1. Use the cursr up/dwn t select a desired TV prgramme. > Infrmatin abut the selected prgramme appears. Tips: - press the blue clur key n the remte cntrl t view mre infrmatin (nt currently displayed) abut the selected prgramme. - t quit the display f detailed infrmatin, press the blue clur key again. 35

36 _en.qxd :13 Pagina 36 EPG (Electrnic Prgramme Guide) (Cntinued) a a 2. Press the green clur key n the remte cntrl t watch/listen t the selected prgramme currently n air. 3. Press the red clur key t mark/unmark a reminder n the selected prgramme. Yu can set up t a maximum f 10 reminders. > The TV will wake up autmatically r display a message when the prgramme is abut t start. Fllw the instructins n screen t watch the prgramme. 4. Press the yellw clur key t jump t the Next r the Previus day r back t Tday. 5. Press the MU/BROWSE key, while Prgramme Guide is active, t activate the Prgramme Guide main menu. Use the cursr up/dwn t highlight and select a menu item. - What's n allws yu t brwse thrugh the prgramme guide infrmatin f yur preferred EPG channels. - Search by genre allws yu t search fr the prgrammes accrding t a selected genre. - Scheduled reminders allws yu t view and change the reminders yu have set. Nte: the reminder(s) will wake up yur TV frm standby nly if yu switched ff yur TV with the B key n yur remte cntrl. - Preferred EPG channels are the channels frm which the EPG data is currently being acquired.this menu allws yu t mark/unmark (up t 50) preferred EPG channels. Prgramme Guide What s n What s n 12:00 Suth tday Search by genre 13:30 Wrking lunch Scheduled reminders 12:30 Brainteaser Preferred EPG chann.. 12:00 This is BBC THREE Acquire EPG data... Inf Nte: after the installatin f yur channels, by default 40 channels with available EPG data will autmatically be marked as preferred EPG channel. - Acquire EPG data allws yu t update the infrmatin fr the preferred prgramme guide channels. Fllw the instructins n screen. Nte: Acquisitin f EPG data is dne autmatically while watching TV. 6. T quit the Electrnic Prgramme Guide, press the a key again. Tips: - the EPG screen will nt include TV channels which are nt in the Preferred channel list r which are uninstalled (See Rearrange menu). -new added channels (via reinstallatin r installatin) will have t be marked in the preferred EPG channel list befre yu can see EPG data. 36

37 _en.qxd :13 Pagina 37 Multimedia Brwser The Multimedia brwser lets yu display pictures r play audi files stred n a USB device.the Multimedia brwser applicatin is invked frm the main menu. -Fllwing file frmats can be reprduced: fr pictures: JPEG fr audi: MP3, MP3 Pr, LPCM - Only FAT/DOS-frmatted memry devices are supprted. - Philips can nt be held respnsible if yur USB device is nt supprted. a T view cntent frm a USB device Tip: if yur USB device des nt fit int the USB cnnectr at the side, use an USB extend cable t cnnect the USB device t the USB prt.ask yur dealer fr mre infrmatin. T insert a USB device Nte: USB devices are nt supplied with this TV. In case f a USB-memry stick r a digital camera, cnnect it t the USB cnnectr at the side. See T make vide and audi cnnectins, Side panel verview, p. 44. When a USB device is inserted, the Multimedia brwser menu is displayed autmatically. See further. T remve the USB device 1. Press the MU/BROWSE key n the remte cntrl t switch ff the main menu. 2. Remve the USB device. 37

38 _en.qxd :13 Pagina 38 Multimedia Brwser (Cntinued) Televisin Channel list Prgramme guide Multimedia USBDevice 1 Picture Music Lndn 2005 Picture The Beatles Xmas2004.alb arnld.jpg USBDevice 1 Picture Lndn 2005 Lndn2005 pic001.jpg The Beatles pic002.jpg Xmas2004.alb pic003.jpg arnld.jpg pic004.jpg USBDevice 1/Picture/Lndn2005 Lndn2005 pic001.jpg pic001.jpg pic002.jpg pic003.jpg pic004.jpg USBDevice 1/Picture/Lndn2005 Lndn2005 pic001.jpg pic001.jpg Press OK t play. Multimedia Brwser menu 1. Insert a USB device. 2. Select the USB device under Multimedia with the cursr up/dwn. > The Multimedia brwser allws yu t brwse cntent stred n the inserted USB device. > The 2-panel brwser will be shwn with the left panel cntaining the cntent types (Music, Pictures). > The right panel will display the cntent that is available f the selected cntent type. 3. Press the cursr right t enter the cntent. 4. Press the cursr up/dwn t select a cntent. 5. Press the cursr right t enter the cntent. 6. Press the cursr up/dwn t select a file r a directry. Nte:press the green clur key t display all the image files in the current directry as thumbnails when brwsing pictures. Press the green key again t display the image files in a list. 7. In case a file is selected, press the OK key t display a picture file r t play an audi file. In case a directry, album r playlist is selected, press the cursr right t enter the cntent r press the OK key t start a slide shw r a lp playback f the files present. 8. Press the cursr left t keep music playing and switch back t the Multimedia menu. 9. Press ne f the clur keys n the remte cntrl t perfrm the crrespnding functin mentined at the bttm f the screen. Tip: the blue clur key can, if necessary, be used t let the clur keys reappear. 10. T stp playing cntent, press the key n the remte cntrl. Ntes: -yur TV supprts slide shws with backgrund music. See Annex 2, Philips TV-slideshw frmat with backgrund music, p. 60; - the playback will cntinue t play even if temprarily switched t brwser screens.the audi will be stpped when anther sng starts playing, r when the end has been reached; - mre technical remarks can be fund in Annex 3, Philips TV-Digital camera and USB issues, p. 62. Fllwing icns may appear: flder self made playlist/album pictures music 38

39 _en.qxd :13 Pagina 39 Multimedia Brwser (Cntinued) Functin keys at the bttm f the screen Details t display a descriptin f the selected file r directry Transitins Slide time Rtate Repeat ne/all Shuffle Zm Full/small screen t select if yu like t apply a transitin during a slide shw t select the duratin a picture will be displayed in a slide shw t rtate a picture t repeat the playback f a music file t shuffle music cllectins in a randm way t select ne f the zm magnificatins (x1, x2, x4) with the cursr up/dwn. Additinally yu can shift the selected zm windw ver the screen with the cursr keys. t tggle between a full r a small screen Nte: t rtate a picture r t select ne f the zm magnificatins, first stp the slide shw with the OK key r the blue clur key. Multimedia functin keys n the remte cntrl Ò t fast rewind displaying cntent t stp playing cntent π - t play a single file, start a slide shw, playback f a flder r ther cllectin - t pause playing cntent t fast frward displaying cntent 39

40 _en.qxd :13 Pagina 40 Teletext Nte:Teletext is nt available via equipment cnnected t the HDMI cnnectr. Mst TV channels bradcast infrmatin via teletext. This TV has a 1200 pages memry that will stre mst bradcasted pages and subpages t reduce waiting time.after each prgramme change, the memry is refreshed. < Press b t switch the teletext n. > The main index page appears n the screen. a Select a Teletext page < Enter the desired page number with the digit keys r with the -P+ key. < Select the ptins at the bttm f the screen with the clur keys. Previus selected teletext page < Press the 0 key. v Select T.O.P. teletext bradcasts < Press i. > A T.O.P. verview f the teletext subjects available is displayed. < Select with the cursr up/dwn, left/right the desired subject and press the OK key. Nte: nt all TV channels bradcast T.O.P. teletext. Select subpages When a selected teletext page cnsists f different subpages, a list f available subpages appears n the screen. Press the cursr left r right t select the next r previus subpage. Picture/Teletext 1. Press the b key. 2. Press the b key t shw Teletext n the right f the screen. 3. Press the b key t return t a full teletext picture. 4. Press the b key t return t a full screen picture. 40

41 _en.qxd :13 Pagina 41 Teletext (Cntinued) Hypertext With hypertext yu can quickly jump t a pagenumber r search fr a specific wrd shwn n the current teletext page. a 1. Press the OK key t highlight the first wrd r a number n the page. 2. Use the cursr up/dwn, left/right t select any ther wrd r number yu want t search fr. 3. Press the OK key t cnfirm.the search starts. > A message appears at the bttm f the screen t indicate the searching, r that the wrd r page is nt fund. 4. Use the cursr up until the tp f the page t exit hypertext. Enlarge a Teletext page < Press the OPTION key n the remte cntrl repeatedly t display the upper teletext part, the lwer teletext part and then t return t the nrmal teletext page size. Teletext menu Menu Reveal Cycle subpages Language Off Off Gr. II The Teletext menu ffers varius functins t cntrl teletext. 1. Switch teletext n and press the MU/BROWSE key t activate the menu. 2. Press the cursr up/dwn t select the menu items. 3. Press the OK key t activate. 4. Press the MU/BROWSE key t leave the teletext menu. Reveal Reveals/cnceals hidden infrmatin n a page, such as slutins t riddles and puzzles. Cycle subpages (if subpages are available) Makes the subpages cycle autmatically. < Press the OK key t activate and t deactivate again. Language If the displayed characters n screen d nt crrespnd with the characters used by the teletext bradcaster, yu can change the language grup here. < Select Grup I r Grup II with the OK key. 41

42 _en.qxd :13 Pagina 42 Teletext (Cntinued) Digital text (nly fr UK) Sme digital channels ffer dedicated digital text services (fr example BBCi). 1. Press b t switch Digital text n. Nte: UK nly: Digital text is displayed when prgrammes are carrying digital text r interactive services. a 2. T use the digital text, fllw the instructins n screen. 3. Depending n the service, yu may be asked t use the cursr keys, the OK key, the clured keys, the teletext key and smetimes the digit keys. 4. When yu have finished watching teletext, select a different channel with the -P+ keys r fllw the instructins n screen t return t picture. 5. Press CANCEL t cancel digital text r interactive services. v Text inf Sme digital channels als ffer infrmatin n the prgramme being bradcast. In that case a message may appear at the bttm f the screen fr a few secnds. Fllw the instructins n screen and use the cursr keys t scrll thrugh the next pages. Nte: digital text will nt be available when Subtitles are set t On in the Features menu. 42

43 _en.qxd :13 Pagina 43 T make vide and audi cnnectins Tip: use the inputs that are available n yur equipment that prvide the best vide r audi perfrmance, as belw. Nte:yur TV cmes with all types f cnnectrs with the exceptin f the DVI cnnectr but sme f yur equipment may be equipped with this type. In this case yu'll need a DVI t HDMI adapter r a HDMI t DVI cable and separate audi cables, all available at yur lcal dealer. Warning: be sure t cnnect the DVI utput cnnectr first, then cnnect t the HDMI input n yur TV. HDMI Cnnectr cable HDMI (High-Definitin Multimedia interface) Audi cnnectin required N Y Pb Pr RGB H/V Yes L/R H V G AUDIO L/R B H R V EXT3 AUDIO L / R EXT3 EXT3 Y G Pb B Pr R Cmpnent vide (480p/576p/720p/ 480i/576i/1080i) Yes H L/R EXT3 AUDIO L / R V EUROCONNECTOR Scart N S-VIDEO S-Vide Yes VIDEO Vide Yes 75 RF/Caxial N Ntes: - cables are ften clur-cded t cnnectrs. Cnnect red t red, white t white... - cmpnent vide (YPbPr) cnnectin is necessary t view vide surces, fr example digital bradcastings cming frm a settp bx, in 1080i, 720p, 576i, 576p, 480i r 480p. 43

44 _en.qxd :13 Pagina 44 T make vide and audi cnnectins - Side panel verview USB Camera, Camcrder, Game 1. Cnnect yur camera, camcrder r game as shwn. 2. Cnnect t VIDEO 2 and AUDIO L 3 fr mn equipment. Fr stere equipment als cnnect AUDIO R 3. S-VHS quality with an S-VHS camcrder is btained by cnnecting the S-VHS cables with the S-VIDEO input 1 and AUDIO inputs Warning: d nt cnnect cable 1 and 2 at the same time.this may cause picture distrtin! Headphne 1. Insert the plug int the headphne scket L as shwn. 2. The headphne impedance must be between 8 and 4000 Ohm.The headphne scket has a 3.5 mm jack. In the Sund menu select Headphne vlume t adjust the headphne vlume. Tip:Press n the remte cntrl t switch ff the internal ludspeakers f the TV. USB See Multimedia brwser, p

45 DIGITAL COMMON INTERFACE HDMI 1 HDMI 2 ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO Y G AUDIO L/R EXT3 EXT2 Pb B V EXT1 Pr R H _en.qxd :13 Pagina 45 T make vide and audi cnnectins - Rear panel verview VCR DVD player VGA Satellite receiver PC - VGA HD receiver CABLE 1 DVD recrder - 1 VCR 2 DVD recrders 2 VCRs Y G Pb B Pr R AUDIO L/R V H Decder VCR EXT3 EXT2 EXT1 Decder Decder DIGITAL ON INTERFACE HDMI 1 HDMI 2 ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO DVI Analgue Hme Cinema amplifier DVD player PC DVI DVI HD receiver DVI DVD player Analgue Hme Cinema amplifier Game cnsle HD receiver Digital Hme Cinema amplifier 45

46 _en.qxd :13 Pagina 46 Cnnect a VCR r DVD recrder Warning: d nt place yur recrder t clse t the screen as sme recrders may be susceptible fr signals frm the display. Keep a minimum distance f 0,5 m frm the screen. CABLE 1 2 EXT2 EXT1 DIGITAL ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO 3 EXT 1 / 2 With a eurcable 1. Cnnect the aerial cables 1 and 2 as shwn. 2. Cnnect the eurcable 3 as shwn. 3. Make yur selectin f the surce t which the VCR has been cnnected in the Installatin menu, Select yur cnnectins, p. 32. RECORDER CABLE 1 2 DIGITAL ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO With the aerial cable nly 1. Cnnect the aerial cables 1 and 2 as shwn. 2. Tune in yur recrder s testsignal and stre the testsignal under prgramme number 0. See Analgue: manual installatin, p. 29. See als the handbk f yur recrder. RECORDER RECORDER 4 DECODER Cnnect a decder and a VCR Cnnect a eurcable 4 t yur decder and t the special eurcnnectr f yur recrder. See als the handbk f yur recrder. Tip:yu can als cnnect yur decder directly t EXT1 r EXT2 with a eurcable. 46

47 _en.qxd :13 Pagina 47 Cnnect tw VCRs r VCR and DVD recrder Nte:yu can nt recrd signals frm equipment cnnected t the YPbPr input. CABLE EXT2 EXT1 DIGITAL ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO EXT 1/2 With eurcables 1. Cnnect the aerial cables 1 and 2 as shwn. 2. Cnnect yur VCRs r DVD-recrder t EXT1 and 2 with the eurcables 4 and Select the equipment yu have cnnected in the Installatin menu, Select yur cnnectins, p. 32, and link it t EXT1 r RECORDER 2 4 RECORDER 5 With aerial cables nly 1. Cnnect the aerial cables 1, 2 and 3 as shwn. 2. Tune in yur recrder s testsignal and stre the testsignal under prgramme number 0. See Analgue: manual installatin, p. 29. See als the handbk f yur recrder. Cnnect a satellite receiver 1 2 EXT2 EXT1 DIGITAL ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO 3 EXT 1 / 2 With a eurcable 1. Cnnect the aerial cables 1 and 2 as shwn. 2. Cnnect yur satellite receiver t EXT1 and 2 with a eurcable Select the equipment yu have cnnected in the Installatin menu, Select yur cnnectins, p. 32, and link it t EXT1 r 2. With Cmpnent Vide cnnectrs See Cnnect a DVD player, a satellite receiver r a HD receiver, p

48 _en.qxd :13 Pagina 48 Cnnect a DVD player, HD receiver r game cnsle Tip: if necessary, yu can adjust the picture psitin t the centre f the screen with the cursr keys. HDMI 1/2 HDMI 1 HDMI 2 ANTNA 75 DIGITAL DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO With a HDMI cnnectr HDMI is the leading new standard fr Digital vide and audi intercnnectin. HDMI 1. Cnnect yur equipment with the HDMI cnnectr. 2. Select the equipment yu have cnnected in the Installatin menu, Select yur cnnectins, p. 32, and link it t HDMI1 r 2. Nte: in case f any prblems, see Annex 4: Issues referring t cnnected peripherals with a HDMI cnnectr, p. 63. Cnnect a DVD player r HD receiver Tip: if necessary, yu can adjust the picture psitin t the centre f the screen with the cursr keys. Y G AUDIO L/R EXT3 EXT2 Pb Pr B R H V EXT1 With a DVI cnnectr Nte: nly a DVD player with DVI with digital sund can be cnnected t the HDMI cnnectr. HDMI DVI DIGITAL HDMI 1 HDMI 2 ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO 1 2 DIGITAL AUDIO IN 1. Cnnect the DVI t HDMI cable t ne f the HDMI cnnectrs f yur TV Cnnect the audi cable 2 t the DIGITAL AUDIO IN cnnectr f the TV. 3. Select the equipment yu have cnnected in the Installatin menu, Select yur cnnectins, p. 32 and link it HDMI 1 r Als select DIGITAL AUDIO IN in the same Cnnectins menu. 48

49 Pr _en.qxd :13 Pagina 49 Cnnect a DVD player, a satellite receiver r HD receiver Tip: if necessary, yu can adjust the picture psitin t the centre f the screen with the cursr keys. CABLE 3 EXT3 : AUDIO L/R Y G AUDIO L/R EXT3 EXT2 Pb B V EXT1 DIGITAL DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO DIGITAL AUDIO IN 2 DVD Y R H G AUDIO L/R EXT3 EXT2 Pb B V EXT3 : YPbPr EXT1 DIGITAL ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO 4 3 EXT3 : AUDIO L/R 5 DIGITAL AUDIO IN 2 Pr R H 1 EXT3 : YPbPr 1 With Cmpnent Vide Cnnectrs 1. Cnnect the three separate cmpnent vide cables 1 t the YPbPr jacks n the DVD player and t the Y, Pb and Pr jacks f EXT3 n the TV. 2. Cnnect the audi cable 2 t the digital ut f the equipment and t the DIGITAL AUDIO IN cnnectr f the TV. 3. Select the equipment yu have cnnected in the Installatin menu, Select yur cnnectins, p. 32 and link it t EXT3. Als select DIGITAL AUDIO IN in the same Cnnectins menu. 4. In case f a DVD player with analgue audi, cnnect the audi cable t the DVD s audi L and R jacks and t the L/R AUDIO jack f EXT In case f a HD receiver and/r a satellite receiver als cnnect the cable TV cable and/r the satellite antenna cable 4 and the aerial cable 5. Ntes: - cables are ften clur cded. Cnnect red t red, white t white, etc..; - the labels fr the cmpnent vide sckets may differ depending n the DVD player cnnected. Althugh the abbreviatins may vary, the letters B and R stand fr the blue and red cmpnent signals, respectively, and Y indicates the luminance signal. Refer t the DVD player s instructins fr use fr definitins and cnnectin details; - t get an ptimal viewing, it is advised t switch yur equipment t the highest pssible supprted display mdes. Warning: in case yu ntice scrlling images, wrng clurs r n clur, n picture, r even cmbinatins f these n yur screen, verify if the cnnectins are dne in the crrect way and if the reslutin and the signal standard f the cnnected equipment are set in the right way. See the handbk fr yur equipment. SAT / STB 49

50 _en.qxd :13 Pagina 50 Cnnect a PC Ntes: - nly a PC with digital sund can be cnnected t the HDMI cnnectin; - if yur PC des nt have digital sund utput, cnnect yur PC via a VGA cnnectr; - befre cnnecting yur PC t the TV, select yur PC mnitr settings t a refresh frequency f 60 Hz; - supprted PC mnitr mdes: VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 Y Pb Pr G B R AUDIO L/R V H EXT3 EXT2 EXT1 DIGITAL HDMI 1 HDMI 2 ANTNA 75 DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO PC equipped with a DVI cnnectr: 1. Use a DVI t HDMI cable t cnnect t ne f the HDMI cnnectrs f yur TV Cnnect the audi cable 2 t the DIGITAL AUDIO IN cnnectr f the TV. 3. Select the equipment yu have cnnected in the Installatin menu, Select yur cnnectins, p. 32, and link it t HDMI 1 r Als select DIGITAL AUDIO IN in the same Cnnectins menu. HDMI DVI 1 2 DIGITAL AUDIO IN EXT3 : AUDIO L/R Y G AUDIO L/R EXT3 EXT2 Pb Pr B R V H EXT1 EXT3 : RGB H/V 1 PC equipped with a VGA cnnectr: 1. Use a VGA t RGB H/V cable 1 t cnnect t the RGB H/V cnnectrs f yur TV. 2. Cnnect the audi cable 2 t the AUDIO R (right) and L (left) inputs f the TV. 3. Select the equipment yu have cnnected in the Installatin menu, Select yur cnnectins, p. 32. VGA 2 50

51 Pr _en.qxd :13 Pagina 51 Cnnect a Hme Cinema amplifier Y G AUDIO L/R EXT3 EXT2 Pb B V EXT1 R H Digital Hme Cinema amplifier < Cnnect a digital Hme Cinema amplifier t the DIGITAL AUDIO OUT cnnectr 1 at the bttm f the TV. Tip: t avid visible delay between picture and sund, use this DIGITAL AUDIO OUT cnnectr t cnnect yur Hme Cinema amplifier. DIGITAL DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO 1 DIGI AU O EXT 1 / 2 Y G AUDIO L/R EXT3 EXT2 Pb Pr B R V H EXT1 Analgue Hme Cinema amplifier < Accrding t the type f cnnectr cables and the cnnectr input available n yur Hme Cinema amplifier, cnnect yur receiver t the AUDIO OUT L and R cnnectrs 3 r t EXT1 r 2 2 at the bttm r the rear f the TV. L AUDIO OUT R 2 DIGITAL DIGITAL AUDIO IN L AUDIO OUT R OUT AUDIO AUDIO OUT 3 AUDIO OUT 1 51