The ViviD is an upgraded version of Iris Software to support full motion video that comprised of three applications

Transcription

1 Intrductin The ViviD is an upgraded versin f Iris Sftware t supprt full mtin vide that cmprised f three applicatins t display, create, and schedule message n Optec CV and GV Series LED Displays. ViviD Message Cmpser gives yu cntrl f the timing f the display, and prvide the tls fr text and backgrund creatin. ViviD Graphic Creatr adds the ability t create graphics and animatins. ViviD Scheduler adds the ability t create, edit, and transmit message schedules. Tgether they give yu all the tls yu need t create captivating presentatins n yur Optec LED Display. Installatin The ViviD installatin CD cmes with installer, dem vide, and manuals. Getting started: 1. Insert the installer CD 2. The fllwing screen will appear, autmatically: When yu insert the installer CD, this screen appears autmatically ViViD Sftware Suite Manual dc Page 3 f 62

2 Installatin (cntinued) The installatin CD has several ptins in the fllwing three categries: Install Sftware Install ViviD Sftware Suite Acrbat Reader (t view manuals) Install Manuals ViviD Sftware Suite Manual (this manual) T Install Sftware: Click t install. The installatin wizard will guide yu thrugh the steps. ViViD Sftware Suite Manual dc Page 4 f 62

3 T Install Sftware (Cntinued) ViViD Sftware Suite Manual dc Page 5 f 62

4 T Install Sftware (Cntinued) When the installatin is cmplete, an icn fr ViviD Cntent Cmpser will appear n yur desktp, and in the Windws Start Menu. ViViD Sftware Suite Manual dc Page 6 f 62

5 Display Cnfiguratin Always begin the sftware with Sign Setup n first use r t add additinal displays t the sftware. 1. Start ViviD Message Cmpser: Duble click r Windws Start Menu Optec Displays ViViD Message Cmpser 2. Access Sign Setup windw: Menu Setup Sign Setup 3. Enter Sign Infrmatin a. Set Reslutin t match yur display b. Set Clr t match yur display clrs c. Select Nrmal (8 Pixels) d. Click OK t exit. ViViD Sftware Suite Manual dc Page 7 f 62

6 Display Cnfiguratin (cntinued) Cmmunicatin Settings The first time ViViD Message Cmpser is used with a display, r if yu have mre than ne display, the cmmunicatin settings will need t be reset r changed. 1. Access Cmmunicatin Setup windw: Menu Setup Select cmmunicatin methd (Direct Link; Internet; Telephne Mdem) Different cmmunicatin methd will bring up different settings 2. Cmmunicatin settings: a. Direct Link (RS232, 485 r Others). Select this fr RS232 and 485 cmmunicatin methd. It requires an ID number (hard ID n the main bard. See quick setup guide fr mre inf. Default = 1) Cm Prt (the cm prt assigned t RS232 n the User End PC) Baud Rate (jumper settings n the main bard. See quick setup guide fr mre inf). ViViD Sftware Suite Manual dc Page 8 f 62

7 Cmmunicatin Settings (cntinued) b. Use Internet. Select this fr Ethernet r Internet cmmunicatin methd. It requires an ID number (hard ID n the main bard. See quick setup guide fr mre inf. Default = 1) IP Address f the Main Bard. (default ) Prt (default 8331) c. Use Telephne Mdem. Select this fr Telephne mdem cmmunicatin methd. It requires the phne number f the display. ID number (hard ID n the main bard. See quick setup guide fr mre inf. Default = 1) Cm Prt (the prt assigned t phne mdem n the UserEnd cmputer). Baud Rate ((jumper settings n the main bard. See quick setup guide fr mre inf). Uncheck Use user defined Mdem initializatin strings unless instructed by Optec Displays Inc. 3. Current Cmmunicatin Settings: This sectin under Setup cntains the settings f the current cmmunicatin methd in use. ViViD Sftware Suite Manual dc Page 9 f 62

8 Testing Cmmunicatin When cmmunicatin is prperly set, there are tw ways f cnfirming cmmunicatin is setup crrectly. 1. Get Sign Inf: ViViD Message Cmpser will retrieve system infrmatin frm Main Bard. T d this: i. Menu Cmmand Get Sign Inf. 2. Sign Image Viewer: This t view the current message/cntent running n the display. i. Menu Cmmand Sign Image Viewer ViViD Sftware Suite Manual dc Page 10 f 62

9 Message Cmpser Basic Editing Mde ViViD Sftware Suite Manual dc Page 11 f 62

10 ViViD Message Cmpser Interface Menu bar 2. Standard Tlbar (this bar is disabled in Basic Editing Mde) 3. A Frame Editing Functin Bar (Advanced Mde) 4. Htkey Bar 5. B Frame Text Editing / Prperty Windw (Basic Mde) 6. Display Reslutin Indicatr 7. Frame Indicatr 8. Frame Windw/Display Area (actual presentatin n the LED display) 9. Frame Animatin/Backgrund Tlbar 10. Effects Windw ViViD Sftware Suite Manual dc Page 12 f 62

11 Creating a message Basic Mde There are tw editable glbal layers in Basic Mde: (1). Text Layer. (2). Vide/Backgrund Layer. ** Text Scrlling is nt available in Basic Mde. Please use Advanced Mde** Adding Vide Messages: Step 1: Access Vide imprt windw click n windw. t bring up the vide imprt windw Lg Select Step 2: Imprt vide file click n Brwse File buttn t bring up Open file windw. Brwse thrugh yur flders and select the desired backgrund file. Cmmn vide file frmats such as AVI, MPEG, MP4, FLV, and mre are supprted. ViViD Sftware Suite Manual dc Page 13 f 62

12 Creating a message Basic Mde (cntinue) One f the fllwing system messages will pp up after file is selected. Click YES t cntinue. Click CONVERT t cntinue with vide imprt. Fit Frame Size vide cnverted will aut resize t fit current display size. Filter Sharp r Smth H264 frmat HD standard, smaller file size MPEG2 frmat typical DVD standard, larger file size. Click OK t cmplete vide imprt. ViViD Sftware Suite Manual dc Page 14 f 62

13 Creating a message Basic Mde (cntinued) Step 3: Adjust the backgrund playback speed use the arrw key and change the value t change the playback speed. Step 4: Repsitin the backgrund click n Stretch and select the desired psitin fr the backgrund. ***Vide file will play ONCE by default. T play mre than nce, click n the white bx and select Animatin Lp and set number f time t play.*** Nw, yur Vide message is cmplete. Either uplad message t display (click n ) r read further fr adding TEXT and Effects. ViViD Sftware Suite Manual dc Page 15 f 62

14 Creating a message Basic Mde (cntinued) Adding Text Over Backgrund Step 1: Enter a text message Mve cursr inside the Text bx and type a message. Step 2: Adjust text size t fit the actual display area Fnt Size Adjust (manually). Use the arrw keys t change the fnt size until entire message displayed prperly in the display area (black bx). Nte that fnt style will change. Nte: Anything utside f the Frame Windw/Display Area will be crpped. Make sure t resize yur entire message t fit the Frame Windw / Display Area. Or, enter multiple lines by pressing ENTER and text size will aut adjusts with Fnt Size Adjust value reset t 0. Further fnt size adjustment can be dne by changing the Fnt Size Adjust value. ViViD Sftware Suite Manual dc Page 16 f 62

15 Step 3: Change Fnt Style Basic editing mde supprts Windws true type fnts. Use the arrw and select desired fnt style. Click n Mre Fnt buttn fr additinal fnt styles. Once selected, text inside the display area will change accrding t the fnt style selected. Nte: B Frame (Basic Mde) editing functin affects everything in the same LAYER. Every frame cntains tw layers Text Layer and Animatin / Backgrund Layer. Changes made are n LAYER level. Step 4: Add Outline r Shadw t Text click n Style and select Outline, then pick the clr fr the utline A clr palette will appear upn clicking the Clr buttn. Use cursr and select the desire clr, and make sure desire clr appears in the clr windw r adjust (click) the clr bar n the right. ViViD Sftware Suite Manual dc Page 17 f 62

16 Step 5: Change Text Clr click n Text Clr and select desired clr fr the text. A clr palette will appear upn clicking the Text Clr buttn. Use cursr and select the desire clr, and make sure desire clr appears in the clr windw r adjust (click) the clr bar n the right. Tips: Multiple Clrs the text clr fr each line can be set t different clr. Click n the clr blck in frnt f each text string t change the fnt clr fr each string. ViViD Sftware Suite Manual dc Page 18 f 62

17 Creating a message Basic Mde (cntinued) Step 6: Text alignment select the desired text psitin (Left, Center, Right Justify). Tip: Yu can als use space bar t repsitin the text. Hw: Put cursr in frnt f the text string inside the TEXT BOX that we want t repsitin, and then press space bar t mve the text string. Nw, yur first message is ready. Click t add Effects t message. lcated in the Menu bar t send message t display. Or read further ViViD Sftware Suite Manual dc Page 19 f 62

18 Creating a message Basic Mde (cntinued) Adding effects t message: Step 1: Access effect windw click n the WHITE bx n the far left. Step 2: Add effects (presentatin functins) t Text Layer select Message In Functins (multiple effects can be added) then select speed fr each effect. Then select Message Out Functins (this is hw text will exist befre the next frame appears) and speed fr the effect. Nte: Effects used and assigned in Basic Mde applied t the entire frame including all the lines in a frame. Advanced Editing Mde allws presentatin functin cntrl ver each LINE f text. (See Advanced Editing Mde fr mre inf.) Imprted vide / animatin will play nce by default. Set animatin lp effect if vide file is t be played mre than nce. Effect duratin pririty duratin is cntrlled by whichever layer (text r backgrund) has the lngest playtime. Vide backgrund will lp and repeat if text layut effects has lnger playtime. Otherwise, frame will wait until vide file finished playing. ViViD Sftware Suite Manual dc Page 20 f 62

19 Creating a message Basic Mde (cntinued) Step 3: Cnfirm presentatin functins (effects) white bx n the left will indicate effects set fr this frame. Previewing message: lcated in Menu bar will preview all the frames in a message. lcated abve the display area will preview that specific frame. ViViD Sftware Suite Manual dc Page 21 f 62

20 Adding New Frame Menu Frame Add Frame this will add a frame right after the current frame. New frame is created in the same editing mde as the current frame. Insert Frame this will insert a frame right befre the current frame. New frame is created in the same editing mde as the current frame. Delete Frame this will delete the frame selected. Add AFrame this will add a frame in Advanced Mde right after the current frame. Add BFrame this will add a frame in Basic Mde right after the current frame. Select frame by clicking n the Frame Windw r use Frame Inspectr. Red brders arund the Effect Windw indicate current frame selected. T activate Frame Inspectr: View Frame Inspectr Saving and Uplading yur Presentatin When yu are dne cmpsing all the frames, yu are ready t save and uplad yur presentatin (message). T save Menu File Save r Save As name yur file. T uplad simply click n the buttn in the tl bar. Or Menu Cmmand Send This will send all the frames in the presentatin (message) currently pened. If yu have multiple presentatins (messages) created and want t uplad all, use Schedule Messages feature. See Schedule Messages sectin fr mre infrmatin. ViViD Sftware Suite Manual dc Page 22 f 62

21 ViViD Message Cmpser Advanced Editing Mde ViViD Sftware Suite Manual dc Page 23 f 62

22 Advanced Mde Advanced editing mde inherited mst f the key features and functins frm the A Series EDT. Few ntewrthy upgrades: 3. Supprts 256 Grayscale and RGB 4. Allw intuitive backgrund animatin imprt 5. Animatin speed and psitin adjustment 6. Randm Rainbw Clr Text Advanced Mde Interface Overview Menu 2. Standard Windws Tlbar 3. Main Tlbar 4. Ht Key Bar 5. Frame Indicatr 6. Frame Windw / Display Area 7. Backgrund Tlbar / AFrame / BFrame 8. Divider buttn 9. Effects windw ViViD Sftware Suite Manual dc Page 24 f 62

23 Advanced Mde Switching between Basic Mde and Advanced Mde T switch frm Basic Mde t Advanced Mde, click n A icn abve the frame windw/display area Understanding available number f lines fr yur display Number f available lines is indicated by the lines in the Effect Windw. Typically, every 8 pixels high equals t a line. Max. fnt size is limited t 8 pixels high. Nte: Ttal number f available lines is determined by yur display reslutin. 8 pixels (H) = 1 line. Multiple lines can be merged by clicking n the Numeral divider buttns next t the red bx t increase the fnt size. Different size f fnts can be selected. In this example, available lines are merged frm 5 lines t 3 lines. Larger fnts fr the tp tw lines. Nte: Cmbing lines is simply merging number f pixels frm 8 pixels per line t 16 r 32 pixels per line and etc. ViViD Sftware Suite Manual dc Page 25 f 62

24 Advanced Mde Examples: ViViD Sftware Suite Manual dc Page 26 f 62

25 Advanced Mde Creating a Message Typing message Instead f typing int a Text Bx like in Basic Mde, mve cursr inside the Frame Windw/Display Area and begin typing. Tip: Use Draft Aut r Letter Aut t aut select best fitting fnt size. Nte: Message r text exceeded Frame windw/display Area can be displayed using Travel functins. Styling Text Unlike Basic Mde, text in Advanced Mde des nt supprt Windws fnts. Hwever, additinal Fnts can be created and imprted using ViViD Fnt Creatr Prgram prvided with the sftware. Fnt Selectin: There are tw fnts included. These are accessed via the Fnt menu in the main tl bar. Fr additinal fnts: use the ViViD Fnt Creatr r Graphic Creatr Prgram t create yur wn custm fnts r imprt Windws fnts. Here we shw the tp line using Draft and secnd line using Letter Aut sizes fnts t the full height f the line, and autmatically increases the size when lines are merged. ViViD Sftware Suite Manual dc Page 27 f 62

26 Advanced Mde Styling Text (cntinued) Selecting a specific size may allw fr certain visual effect. Fr example, the Draft 4x7 fnt is the narrwest, allwing fr the mst character per line. Fregrund/Backgrund icn shws the current setting, as it will appear n the display. The Fregrund menu allws yu t select the clr f the fregrund (the character). Clrs are limited t the clrs f the LEDs in yur display. A clr palette will appear upn clicking the Text Clr buttn. Use cursr and select the desire clr, and make sure desire clr appears in the clr windw r adjust (click) the clr Assigning different clrs fr characters and/r lines is allwed. Tip: Use t randmly assign clr t each character in a string f Text selected. The Backgrund menu allws yu t select the clr f the backgrund (the field, r area where the characters and backgrund graphics / animatins d nt appear.) T apply a change t fregrund/backgrund: 1. Highlight text 2. Pull dwn the fregrund menu and select the desired clr 3. Repeat with backgrund menu ViViD Sftware Suite Manual dc Page 28 f 62

27 Styling Text (cntinued) Bld, Flashing, Shadw, Outline, and Randm Clr Text Styling All these effects can be applied t selected text r befre text is selected t apply the effect in all subsequently entered text. The Bld buttn tggles between bld and plain text The Flash buttn causes text t flash. Flash text is represented by vertical gray bars. Shadw and Outline. This image shws the text Three Lines reversed (red backgrund, black fregrund). The grey vertical bars n the first line f text indicate a flash effect. The wrd NO is highlighted. Any Styling will apply nly t this highlighted text. This image shws the shadw and utline effects. Tkens Tkens can be inserted within lines f text, and they cntain system variables that yur display knws hw t translate int dynamic infrmatin. (Tkens nly wrk in Advanced Mde.) T use a tken: 1. Click n the Tkens icn t pen the Tkens windw. 2. Click in the frame where yu want the tken t appear then click the tken yu want frm the tkens wind. Day Name : current week day; e.g. Thursday Day N. : current day f the mnth; e.g. 24 Mnth Name : current mnth; e.g. January Year : current year; e.g. 11. Type 20 in frnt f tken t shw Time 12H : current time in 12 hurs frmat Time 24H : current time in 24 hurs frmat Fahrenheit : current temperature in Fahrenheit degrees Celsius: current temperature in Celsius degrees AM/PM : current time in AM r PM Week Abbr : current week day; e.g. Mn fr Mnday Mnth Abbr : current mnth; e.g. Jan fr January. Nte: If display displays incrrect temperature, it can be ffset using the Temperature Offset under Cmmand. ViViD Sftware Suite Manual dc Page 29 f 62

28 Styling Text (cntinued) Freign Language Characters Nn English characters can be easily fund and inserted int a line f text, great fr selling Häagen Dazs r Jalapeñs. Nte: This feature is NOT available with Draft 4x7 fnt. Variables Yu wrk hard t get yur display displaying just he right message with just the right effect. But then, every time yu wan t change a price, r sme ther frequently changing text, this is the time t use a variable. Variables are placehlders that reference a table where yu can easily change the values, withut having the mess arund with the presentatin. Setting up Variables First create yur table f variables: 1. Menu Cmmand Advanced Cmmand Send Variables ViViD Sftware Suite Manual dc Page 30 f 62

29 Styling Text (cntinued) 2. In the left clumn (Value) f the Send Variables windw, type the variable value; e.g. $ In the right clumn (Hint), enter a label, fr yur benefit, s yu can identify the variable later; e.g. Hamburger 4. In the center clumns (FreClr, BackClr) set the fregrund and backgrund clr fr yur variable text. 5. Nte the variable number, which is the line number f the table and Click Exit 6. Create a frame (Add AFrame), with the text yu desire. Fr example: Hamburger Special 7. Click n the empty line. 8. Click n the Variable buttn t pen the variable windw. 9. Select the variable number that matches the line f the previus Send Variables windw. If it was n line ne, select VAR01. VAR01 will appear in the frame. When yu send the message t the display, the value will appear in place f VAR01 t change the variable, g t the Send Variables windw again. Change the value, and click the Send buttn. The display will be immediately updated with the change. ViViD Sftware Suite Manual dc Page 31 f 62

30 Backgrund / Animatins and Graphic Imprting vide files and static image files 1. Click n the BK icn abve the Display Windw fr each frame. 2. Brwse File and lcate the animatin r graphic yu want t use. Yu can select frm the free backgrunds prvided with ViViD Sftware r create yur wn. Custm animatins and graphics, in GIF and BMP, can be cnverted t ViViD file frmat using ViViD Graphic Creatr. (See ViViD Graphic Creatr sectin fr mre infrmatin.) 3. Cnvert files Fit Frame Size vide cnverted will aut resize t fit current display size. Filter Sharp r Smth H264 frmat HD standard, smaller file size MPEG2 frmat typical DVD standard, larger file size. ViViD Sftware Suite Manual dc Page 32 f 62

31 4. Frame Start and End selectin Yu can select where t begin and end a vide. Set Start and End t a same number will prvide yu a still image n that selected frame. 5. Frame playback speed and psitin adjustment ***Vide file will play ONCE by default. T play mre than nce, click n the white bx and select Animatin Lp and set number f time t play.*** ViViD Sftware Suite Manual dc Page 33 f 62

32 Text Scrlling Here are the steps t scrll the text acrss the display. 1. Enter the message. Cntinue t type in the same LINE. Text will shift t the left f the display area. 2. Style text. Add bld, flash, randm clr, shadw r utline t the text by highlighting. 3. Add backgrund. (fllw imprt backgrund prcess abve). 4. Assign scrll effect. Click n the Effects Bx and select the fllwings: a. Message In Functin Travel in << b. Speed d nt enter any number r speed. c. Message Out Functin Travel ut<< d. Speed d nt enter any number r speed. 5. Click Preview t view. ViViD Sftware Suite Manual dc Page 34 f 62

33 Line Presentatin Functins Line presentatin functins are used t cntrl hw a line f text appears n the display, and hw it exits. These Effects are nrmally applied t a Line in a single frame (Advance Mde). Using the Glbal Effect ptin applies a single effect t all lines in a frame. Applying Effects 1. Click the Effects Windw fr the line f the frame where yu want the effect t apply.! 2. The Line Presentatin Functins windw will pen. 3. In the left, Message In Functins clumn, select an effect; e.g. Frame in << 4. Nw, set the speed f the In effect by clicking n f the numerical buttns labeled Fast > Slw. 1 is fastest, and 9 is slwest. 5. In the right, Message Out Functins clumn select anther effect; e.g. Travel Out<< 6. Nw, set the speed f the Out effect by clicking ne f the numerical buttns. 7. This is hw the text field will lk like. Press OK t prceed. 8. As yu can see, the green text describing the effect is nw next t the line it is applied t, in the Effects bx. This makes it easy t see what each frame will d. 9. Select Preview All frm the Run menu, r click the Preview buttn at the tp f each frame. There are 26 effects. We encurage yu t try them all ut. Yu ll sn find that certain message lend themselves t different effects and speeds. Cmbine with animatins t keep yur audience watching! ViViD Sftware Suite Manual dc Page 35 f 62

34 Dynamic Text Effects Glbal Effects Glbal Effects applies the same effect t every line in a frame. Click the Glbal Effects buttn. The effect f the first line will be applied t the whle frame. The ther Line Effects bxes will be grayed ut. Using Frames Frames can be added, inserted, r deleted like Adding Frame in Basic Mde using the Menu bar. Menu Frame Add, Insert, Delete, and etc. (See Basic Mde fr mre details). Icns in tl bar can be used fr adding, inserting, r deleting a frame. Add Frame add a frame right after the current frame in the same editing mde. Insert Frame insert a frame in frnt f the current frame in the same editing mde. Delete Frame delete current frame. Fix Frame lck a lg r graphic in a fixed psitin frm Frame t Frame while text message cntinue t mve. Press Fix Frame n the frame yu want t have the lg r graphic repeated, then Add Frame. Presentatin effects will be applied nly t the Text r in line lg r graphics. Using Frame Inspectr If yu start getting t many frames t keep track f, yu ll need the Frame Inspectr. It appears n the right side f the screen, and prvides tls fr cutting, pasting, duplicating, deleting, and re sequencing frames. Open Frame Inspectr: Menu View Frame Inspectr ViViD Sftware Suite Manual dc Page 36 f 62

35 Using Frames (cntinued) Using the Frame Inspectr fr re sequencing Frames: If yu d nt have several fames made (at least 3) create thse frames nw, fr demnstratin purpses. Select the last Frame, within the Frame Inspectr, by clicking n it. Use the up arrw and click ne. The third item becmes the secnd item. Click again, and it cmes the first. Use the dwn arrw t mve it back dwn the list. Using the Frame Inspectr fr cpying and pasting (duplicating) Frames: Select the Frame yu want t manipulate in the Frame Inspectr. Click the Cpy Frame buttn. Select the frame yu want the cpied Frame t appear after. Click the Paste Frame buttn. The pasted frame appears, but the previusly selected Frame remains selected. Using the Frame Inspectr fr cutting and pasting Frames: Use the sequence fr cpying and pasting (abve), but select the Cut Frame buttn instead. Using the Frame Inspectr fr deleting Frames: Select the Frame yu want t manipulate in the Frame Inspectr. Click the Delete Frame buttn. Yu can als use the keybard shrtcut Ctrl Delete. Using the Frame Inspectr fr deleting multiple Frames: Select the first Frame yu want t manipulate, in the Frame Inspectr. Hld dwn the Ctrl Key n yur keybard, and click n additinal frames yu wish t delete. Click the Delete Frame buttn r use the keybard shrtcut Ctrl Delete. Merging Files Suppse yu have created a nice message, and saved it. Later, yu create a new message, but yu want the frames frm the ld message added n. This is called merging files. Decide where in yur presentatin yu want the merged filed t appear. Select the Frame yu want the new Frames t appear after in the Frame Inspectr. Select Merge frm the File menu. Yu will see a standard Windws Open dialg bx. Navigate t the file yu want t merge, and select it. Click Open The new frames will appear in the Frame Inspectr. ViViD Sftware Suite Manual dc Page 37 f 62

36 Using Frames (cntinued) Imprting Text Advanced Mde allws yu t imprt a text (.txt) file. In the Frame Inspectr, select the Frame yu want the imprted text t appear after Select Imprt Text File frm the File menu. Navigate t the file, select it, and click Open. Each line f text will appear n a line, in a frame. When each frame is FULL a new frame is created and filled, until the entire text file has been added. Ops! If yu select the wrng file, and it is imprting frame after frame f text, press the ESC key n yur keybard r click the cancel buttn t stp the prcess. ViViD Sftware Suite Manual dc Page 38 f 62

37 ViViD Message Cmpser Schedule Messages ViViD Sftware Suite Manual dc Page 39 f 62

38 Scheduling Messages Hw t Create a Schedule As sn as yu have several presentatins (messages), yu ll want t schedule them. Yu can plan as far ahead as yu want, by using multiple schedules. T create a schedule: 1. Select Schedule Messages frm the Cmmand menu. 2. This will pen the scheduling winds. 3. Select the New buttn t add a previusly created presentatin t yur schedule. The Edit Date Time dialgue will appear. ViViD Sftware Suite Manual dc Page 40 f 62

39 Scheduling Messages (cntinued) Hw t Create a Schedule (cntinues) 4. Set the time and date yu want this file t play thrugh. 5. Select the Brwse buttn t select the file yu want t schedule. 6. After the file has been set, select the OK buttn t set this entry t the schedule. Saving / Opening Schedule Files 1. In the scheduling windw pen the File menu. 2. In the File menu yu will find ptins fr the fllwing: Start a new schedule. Open a previusly created schedule. Save a schedule file fr later use. Hw t Send a Schedule Once a schedule has been created, it must be sent t the displays. When yu send the schedule, the previus schedule is verwritten (replaced). Open the Cmmand menu in the schedule dialgue, and then select Send Schedule ViViD Sftware Suite Manual dc Page 41 f 62

40 Ht Keys The Ht Key bar allws yu t set previusly created presentatins as interrupts. When instructed the Ht Keyed file will interrupts the current schedule, the Ht Keyed presentatin will play, and then the riginal schedule will resume playing. T set a Ht Key file: 1. Select any buttn n the Ht Key bar. This will pen the Ht Key menu fr the selected buttn. 2. Select Setting in the Ht Key menu Only cntent r vide files created thrugh ViViD Cmpser is supprted. 3. Select the Brwse buttn and brwse fr the file yu wuld like t set fr this Ht Key. Then Select the OK buttn. T send a Ht Key t display: T send a Ht Key file t interrupt current schedule, simply press n the buttn f the file yu wuld like t send and select Send in the htkey menu. T send a Ht Key t display: Fr mre than the standard five Ht Keys yu can select the Mre buttn n the Ht Key bar. This will reveal the ptin fr mre Ht Keys. ViViD Sftware Suite Manual dc Page 42 f 62

41 ViViD Message Cmpser Additinal Optins and Settings ViViD Sftware Suite Manual dc Page 43 f 62

42 Additinal Optins and Settings Display Brightness Cntrl Yur LED has adjustable Brightness setting. Run the display at apprpriate levels f brightness fr yur envirnment. It will imprve readability, save energy, and make the dides last lnger. Yur display is cmpeting with ther light in the envirnment. During the day, it the display is utdr, r in a windw, the display will have t be bright t cmpensate fr daylight. At night the display can be run at a lwer level. Indrs, the display may run at a mderate level all the time. T access the display brightness settings, pen the Cmmand menu. 1. Set Full Brightness set display brightness 100% f the display s ptential brightness. 2. Set Aut Brightness by Phtcell pht cell brightness aut dim the display brightness based n current ambient lighting cnditins. 3. Set Brightness Level this will bring up the Direct Adjust brightness windw. Changing the level will change the display brightness directly. 4. Set Brightness Schedule sftware prgrammed dimming by time f day. ViViD Sftware Suite Manual dc Page 44 f 62

43 Additinal Optins and Settings (cntinued) Set Display ON/OFF time Cmmand Set On/Off Schedule. T use, enter the time t Turn On and the time t Turn Off the display, then check Enable. Up t 4 different time slts can be scheduled. Send Cmmand when time is set. Set Display Rebt Schedule Cmmand Set Rebt Schedule. This is t rebt the display at a scheduled time. Enter the time t rebt display (10sec bt up cycle) and check Enable. Send cmmand when dne. Update 4 time slts can be scheduled. ViViD Sftware Suite Manual dc Page 45 f 62

44 Remte Access Cmmand Remte File Manager r Remte Schedule Manager. This is t allw users t lg nt the display cntrller t mange the file and manage the schedule currently in the cntrller itself. Remte Player Viewer Cmmand Sign Image Viewer This allws users t see what s currently playing n the display cntrller. ViViD Sftware Suite Manual dc Page 46 f 62

45 Setting a Passwrd This limits access t ViViD Message Cmpser fr security. T set the passwrd: 1. Menu Setup Change Passwrd 2. In the Change Lgin Passwrd windw, enter the passwrd in the New Passwrd and Cnfirm Passwrd fields. Warning: Be sure yu remember this passwrd. Either chse n that is memrable r make a nte f it, and secure the nte. A gd passwrd is 6 r mre characters, using bth numbers and letters. Temperature Adjustment The temperature returned by the temperature prbe may drift smewhat frm the actual temperature. T adjust: 1. Menu Cmmand Advanced Cmmand Adjust Temperature 2. Measure the utdr temperature at yur lcatin. 3. If the measured temperature is higher r lwer than the display indicates, enter the difference like this: +2F t add 2 degree Fahrenheit t the temperature displayed n the display. Fahrenheit is adjusted in whle number increments. 3F t subtract 3 degrees frm display. +2.5C t add 2.5 Celsius t the temperature displayed n the display. Celsius can be adjusted in ½ degree increments. 0.5C wuld subtract ½ Celsius frm the temperature displayed n the display. ViViD Sftware Suite Manual dc Page 47 f 62

46 Frmat and Clean Memry Cmmand Advanced Cmmand Delete files nt in schedule r frmat SD Card & Rebt. Delete files nt in schedule t erase any file stred but nt in current schedule. Frmat SD & Rebt t erase all the infrmatin inside the SD card. Change Display IP Address Cmmand Advanced Cmmand Set Sign Netwrk Cnfiguratin. This is t change the default IP settings f the display. Enter desired IP, mask, gateway, then press Send Cnfig. ViViD Sftware Suite Manual dc Page 48 f 62

47 ViViD Sftware Suite ViViD Graphic Creatr ViViD Sftware Suite Manual dc Page 49 f 62

48 ViViD Graphic Creatr Intrductin ViViD Graphic Creatr is displayed as a simple way t cnvert and/r create graphic at reslutin suitable t LED displays. ViViD Graphic Creatr files can then be imprted int ViViD Message Cmpser where they can be mixed with text. T pen prgram: Menu Lg ViViD Graphic Creatr (r File ViViD Graphic Creatr) 5 Tip: This prgram can als be pened in the ViViD Message Cmpser Lg Graphic Creatr. Nte: Graphic Creatr will use the Sign End prperties frm Message Cmpser. If the sign is setup as 24x72 RGB, Creatr will be pened with that setup. 4 Interface Overview 1. The Frame Wrkspace is where yu draw graphics and animatins 2. Frame Preview shws a thumbnail f each frame 3. The Crdinates shw the current muse pinter psitin; the X and Y crdinate n the frame. The crdinate changes as yu mve yur muse. 4. Click n any clr in the Clr Pallet t change the current clr f the drawing. 5. The Tlbar hlds the tls yu will use t create and manipulate graphics. 6. Line Width changes the thickness f the line in pixels. The selected line width is shwn with a red bx arund it. ViViD Sftware Suite Manual dc Page 50 f 62

49 Setting Display Size Graphic Creatr is designed t grab the Sign Setup prperties as its animatins/image size. This size can be changed. While creating animatin, it is imprtant t keep the size f yur display in mind. Are yu ging t run yur animatin in line with yur text? Hw large will the text be? Are yu ging t span multiple Frame Rws, r the Fix Frame feature? T resize: 1. Right muse click n the Wrkspace (the grid area). 2. Select Resize. The Image Size windw will appear. 3. Specify the size in pixels, and click OK ViViD Sftware Suite Manual dc Page 51 f 62

50 Drawing Using the Tlbar The Tlbar cntains the tls t draw lines, circles, ellipses, text, and custm shapes. It als includes a rubber stamp tl. Tls: The Line Tl allws yu t create straight lines n the Frame Wrkspace. The Circle Tl allws yu t draw utlines f circles in the Frame Wrkspace. Click Circle Tl first. Then, in the Frame Wrkspace, left click and drag the muse until yu have the circle f the desired shape and size. The Ellipse Tl allws yu t draw utlines f ellipses in the Frame Wrkspace. Click Ellipses first. Then, in the Frame Wrkspace, left click and drag the muse until yu have the ellipses f the desired shape and size. The Bx Tl enables yu t draw rectangles in the Frame Wrkspace. Click bx, then left click and drag in the Frame Wrkspace t draw the rectangle f the desired shape and size. The Fill Tl allws yu t fill in an enclsed area with a selected clr. The Edit Tl allws yu t make a selectin in the Frame Wrkspace. Click Edit, then click and drag the muse arund the area yu want t select. The Eraser Tl. Click the Eraser and drag thrugh the area yu want t erase. The pixels f the selected area are returned t black. The Pen Tl allws yu t make freehand drawings. The Text Tl enables yu t create text message n the Frame Wrkspace. Click n the Text Tl, the text settings appear belw the Tl Bar. Chse the fnt and size, and then click n a lcatin inside the Frame Wrkspace t type yur text message. ViViD Sftware Suite Manual dc Page 52 f 62

51 Using Stamp Tl The Stamp Tl is a tl that allws yu t chse frm a wide selectin f pictures frm the stamp tlbar as shwn belw. Yu can use the selected stamp and click n the Frame Wrkspace t stamp an image. After yu click the Stamp Tl, a stamp ptin will be shwn. The Default buttn allws yu t chse the stamp file that cntains the stamp images. The Opaque check bx lets yu chse whether r nt the stamp image is paque r transparent. If the Opaque check bx is unchecked, the amber clr f the icn will becme transparent. The Stamp Images can be resized by using the + and buttns. Rtating / Flipping an Image Yu can rtate a selected area in an image frame: 1. Use the Edit Tl t select an area in the frame: 2. G t Menu Tl Rtate Image 3. Enter rtate degree. ViViD Sftware Suite Manual dc Page 53 f 62

52 Using Imprt Image In additin t the BK backgrund functin within ViViD cmpser, this is anther tl t imprt static image. This tl allws user t create a static image slide shw and can be represent with up t 10 secnds hld per image. Nte that animatin and vide file imprts are nt supprted here. Please use BK functin within the Cmpser Sftware. Imprting Images File Imprt Image Brwse fr the desired image file. Mst static image file like JPEG, BMP, GIF are supprted. T add mre images, repeat abve step. ViViD Sftware Suite Manual dc Page 54 f 62

53 Cpy and Pasting Image T cpy an imprted image: (used t repsitin the sequence f the image). 1. Create a new image frame. a. New New Image (a blank frame will be added right after the highlighted frame) 2. Selecting the image t cpy. a. Click select tl and drag ver the image t highlight the area t cpy. 3. Cpy a. Edit Cpy ViViD Sftware Suite Manual dc Page 55 f 62

54 5. Paste a. Mve cursr t the blank frame created earlier (click n the frame until blue bx appear). b. Edit Paste **Nte after pasting, blank frame will remain blank. Click n a different frame, fr the cpied image t appear. Delete frame 1. Click and highlight the frame t be deleted. 2. G t Edit Delete (shrtcut: use delete key n the keybard) Save file Nw, the slide shw is cmpleted. Save file. Files are saved t Optec_ViViD flder by default with.cxt file extensin. ViViD Sftware Suite Manual dc Page 56 f 62

55 Using slide shw This feature allws user t set a static hld, up t 10 secnds, using ViViD Message Cmpser. Once the slide shw is created using Graphic Creatr, exit it t bring up the Message Cmpser. 1. Adding slide shw file a. Click BK icn abve the Frame Windw t bring up the Lg Select windw. b. In the Lg Select windw, Brwse File t lad the slide shw.cxt file created. c. Preview windw will shw the first image and number f image (frame) in the file. d. Click OK t insert file. 2. Set display duratin per image a. Use the Up and Dwn arrw keys t change the display duratin per image (frame). 1 t 1/10. 1 = 1/10 secnd (fastest); 1/10 = 10 secnds hld. ViViD Sftware Suite Manual dc Page 57 f 62

56 ViViD Sftware Suite ViViD Fnt Editr ViViD Sftware Suite Manual dc Page 58 f 62

57 ViViD Fnt Editr This is t create custm fnts r t imprt Windws fnts fr Advanced Mde. T pen Fnt Editr: File ViViD Fnt Editr. OR Fnt ViViD Fnt Editr Imprt Windws Fnt This is the recmmended methd. File Imprt Windws Fnt select the Fnt and size yu want click Imprt Nte: Cnsider yur display size when selecting the fnt size. If fnt size created is larger than allwable display reslutins, fnt will be crpped. Multiple frames will be created. ViViD Sftware Suite Manual dc Page 59 f 62

58 Imprt Windws Fnt (cntinued) Saving Fnt File File Save As Name the file Using Saved Fnt File Befre Advanced Mde can start using the Fnt Saved, Fnts must be IMPORTED int ViViD Message Cmpser. T Imprt Fnt File Fnt Imprt Fnt File Brwse Open ViViD Sftware Suite Manual dc Page 60 f 62

59 Using Saved Fnt in ViViD Message Cmpser Once the saved fnt is imprted int ViViD Message Cmpser, the fnt will becme ne f the available fnt selectins in the drp dwn list. Select the fnt and start typing. Nte, if FONT size imprted is LARGER than allwable display size, it will be crpped. In that case, please recreate the fnts in apprpriately size. ViViD Sftware Suite Manual dc Page 61 f 62

60 Thank yu fr chsing an LED display frm Optec If yu have any questins abut the peratin f yur display, cntact yur Authrized Dealer. ViViD Sftware Suite Manual dc Page 62 f 62