RELEASE NOTES [ ]

Transcription

1 RELEASE NOTES [ ] Paderbrn, 11/02/2014 Cntact: grandma2 Sftware Releases [ ] Dear user, We are delighted t annunce the next fficial sftware release fr the grandma2 versin [ ]. Enjy the next generatin f lighting and vide cntrl. If yu have any imprvements t share with us r if there are any questins, cmments r any bugs fund, please infrm ur Technical Supprt at tech.supprt@malighting.cm. Thanks fr dwnlading and enjy yur shw! Yur MA Lighting Team MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

2 Release Ntes Imprtant: The MA-Net2 prtcl has changed t supprt the MA 8Prt Nde devices. All MA devices need a new netwrk streaming prtcl with the 2.9 sftware. Once updated t the crrelating Versin t grandma2 v2.9, MA 2Prt, MA 4Prt, MA 8Prt, MA NSP. MA 4Prt Nde and the MA NDP will n lnger wrk in a sessin with an lder netwrk streaming prtcl (e.g.: grandma2 v2.8). Dwndating MA 2Prt Ndes and MA NSP running in MA 4Prt Nde Mde t be v2.8 cmpatible is pssible nly via grandma1 v All ther devices can be dwn-dated via USB r windws installer nly. If yu wuld like t update yur dimma system frm any versin belw 7.x please cntact yur MAdealer r MA direct fr any update infrmatin. Shuld yu be using grandma2 in cnnectin t ur dimma slutins, please get in tuch with us, since a cnsle update will nw require a MA NDP update and vice versa. We are happy t assist yu. The current versins f grandma npc and grandma 3D require minimum Windws XP with Service Pack 3. The latest versin f Micrsft's Net. Framewrk (4.0) will be installed n yur cmputer, if nt already installed. Fixed Bugs and imprved functinality grandma2 Versin Slved: Tracksheet edit release values d nt blck default values instead any mre. Slved: Calling channel sheet view cntaining Mask If Live freezes cnsle. Slved: Delete cue range with ptin Cue Only des nt delete the whle cue range at ther statins in the netwrk. Slved: HTP Exec shuld nt be verwritten when kncking in values in prgrammer. Slved: Aut-create single grups f multi patched fixtures crash the desk. Slved: Delete selectin des nt un-patch channels at ther statins in the netwrk. Slved: Changing Agenda view mde crashes the desk. Slved: Inf View may crash when selecting anther sequence, cue, macr,... t shw its cntaining inf. Slved: Executr buttn "lad" functinality in cmbinatin with an "up" r "dwn" key crashes the desk. Slved: Fixture editr: delete all attributes frm a mdule crashes the desk. Slved: Start desk with frce lgin des nt shw executr bar. Slved: Timecde events frm shw files stred with versin 2.8 may nt be cnverted crrectly. Slved: The alternative flip slutin in stage calibratin menu may crash the desk. Slved: Assign a cue times using cmmandline are nt spread in netwrk. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

3 Slved - MA 2Prt Nde freeze when changing between Sessin and standalne mde Slved - MA 2Prt Nde delayed utput f sacn and Artnet MA 2Prt Nde v1.77: Imprved synchrnisatin between grandma2 npc and MA 2Prt Nde. MA NDP Minimal Streaming Versin set t MA VPU [2.9.1][6.808] Better Perfrmance with Single Layer Transitin MA VPU des display the utput FPS crrect again Frame Blending is wrking again In the Warper Editr, a right muse click des nt kill the muse arrw any mre If MA VPU is nt in Shw-Mde and cntent gets inserted, the clips are send much slwer nw t the cnsle nw. This helps t have a better playback perfrmance. Knwn limitatins: If the Text Ticker is used in cmbinatin with any Pixel-Mapper, the text size is abslute. S the size may differ t any DVI utput if the reslutin f the Pixel-Mapper is very small. If the MA VPU gets updated frm Versin 7.16 r belw, the user has t install Versin 7.54 prir t updating t Versin 7.81 r abve. The Text Ticker can nly be animated manually if the text is smaller then the visible utput n screen. If the text is lnger then the visible text n screen, then nly the text ticker animatin parameters in the Cmpsitin Feature can be used. Sync prblems happen when running clips abve nrmal speed. MA VPU plus nly - It is nt intended t have the mnitr playback n the internal display in frame synchrnicity t the DVI utputs. The update f this display is running n lwer frame rates t safe systems CPU pwer. The Brder Parameter and the Ocean effect dn t wrk in cmbinatin. Brder, Bcean Effect and Image Split Parameter dn t wrk in cmbinatin. If the Parameters Hue, Saturatin, Brightness and Cntrast were prgrammed in the shwfile, then the prgramming f these parameters is lst if the new MA VPU Fixture Types Versin 7.75 and higher are used. If the ld fixture types are used, then everything is wrking as befre, except the clr picker is nt wrking as expected in the grandma2. Single Layer Transitin des nt wrk tgether with the Text Ticker. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

4 Single Layer Transitin des nt supprt Layer Reference Inputs. There may be a small visual artifact if a Single Layer Transitin takes place and the reslutin f cntent 1 is nt as the reslutin f cntent 2. MA NDP [8.20] MA NDP Minimal Streaming Versin set t If MA NDP cnnects the first time after startup t a new started grandma2 cnsle, the rack data is send crrect nw MA NDP des nt crash any mre if grandma2 jins sessin via "Create Sessin" MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

5 Release Ntes grandma2 Versin Imprtant: The MA-Net2 prtcl has changed t supprt the MA 8Prt Nde devices. All MA devices need a new netwrk streaming prtcl with the 2.9 sftware. Once updated t the crrelating Versin t grandma2 v2.9, MA 2Prt Nde, MA 4Prt Nde, 8Prt Nde, MA NSP and the MA NDP will n lnger wrk in a sessin with an lder netwrk streaming prtcl (e.g.: grandma2 v2.8). Dwndating MA 2Prt Ndes and MA NSP running in MA 4Prt Nde Mde t be v2.8 cmpatible is pssible nly via grandma1 v All ther devices can be dwn-dated via USB r windws installer nly. If yu wuld like t update yur dimma system frm any versin belw 7.x please cntact yur MAdealer r MA direct fr any update infrmatin. Shuld yu be using grandma2 in cnnectin t ur dimma slutins, please get in tuch with us, since a cnsle update will nw require a NDP update and vice versa. We are happy t assist yu. The current versins f grandma npc and MA 3D require minimum Windws XP with Service Pack 3. The latest versin f Micrsft's Net. Framewrk (4.0) will be installed n yur cmputer, if nt already installed. Main feature verview: The clur picker is nw able t handle multi-clur LEDs and clur wheels A Q fader fades frm purest clur thrugh maximum brightness t a clean RGB mix The clur picker is an independent view nw Cpy, paste and insert at many places, e.g. fr fixtures and layers inside the setup Imprt and exprt f users and user prfiles (new menus) Imprt and exprt f preset references tgether with fixture types New running playbacks view The layut view can cntain images (new image pl) and pl bjects shwing real-time graphics, e.g. timecde as well as static vide thumbnails New camera pl t directly cntrl MA 3D cameras Filters can be applied t the stage view It is pssible t have a height ffset fr the fllw functin inside the stage view Time cde shws d als recrd grup and special masters Pls and presets can be stred withut specifying numbers Screens can be turned t black MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

6 New flash n, flash g, swp n and swp g cmmands Lad next and lad previus cmmands fr executrs Different infade and utfade times fr Chasers New syntax allws aligning several ranges f values at the same time. New imprved calculatr functinality Imprved x-y-z engine setup Imprved clarity fr the setup dialgue New Clne menu New views inside the grandma2 npc ptimized fr npc cmmand/fader wing usage Implementatin f the nn-prprietary PsiStageNet(PSN) prtcl fr real-time x-y-z tracking systems clean-up and imprvements f multiple places in views and menus New functins and features in detail: Clur Mixing System Clur special dialgue has new perating elements which define which clur attributes are used t mix the clur. In additin t clurrgbs, clur wheels(c1...) and scrller are supprted. RGB (Headline in fixture sheet) was renamed in Mix clur and cntains all additive clurs. There is a "RAW Faders" view. All clur channels f the current selected fixtures are displayed e.g. R G B A W. The"HSB" view has a "Q" Fader. Only active when fixtures are selected which have als ther additive clur channels than RGB. Set t 0% / Pure, the clur is mixed mainly frm the additinal clur channels(e.g.. Amber). Set t 50% / Max, maximum Intensity tgether with the RGB clur is adjusted. Set t 100% / Primary, nly RGB channels are used fr mixing. There is als a new buttn which decides clur mixing preferences "Prefer MIX clur" = prefer Mix clur and set all clur wheels t pen white. "Mixclur nly" = nly ClurRGB attributes are cntrlled by this dialgue. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

7 "Clurwheel nly" = nly Clur wheels (clur 1, 2, 3) and scrllers are cntrlled by this dialgue. The values f the "Hue" Fader are displayed frm When ptin "Link Encder HSB" is active the encder wraps arund." Setup Patch and Fixture Schedule "Setup / Shw / Patch + Fixture Schedule: with "Cut...", "Cpy...", and "Paste..." rw can be mved r cpied.buttn names change autmatically accrding t cntext (left area "Layers" r right area "Layer".When ne r mre rws are marked red ("cut") they can be pasted anywhere else.when cpying fixtures r layers the ID Numbers and the Patch will be ignred (nt allwed t exist twice). When pressing "paste" after having cpied and selected a new rw a pp-up will ask whether t verwrite r t insert the line(s). Exprt Patch and Fixture Schedule t File fr viewing (HTML-Brwser), r printing (Excel). Till nw this was pssible via predefined macrs. Setup/Shw/Patch + Fixture Schedule r Patch nly: "Exprt Layer" r "Exprt Fixture", depends n selected rw, ne r mre Layers / Fixtures can be exprted. A pp-up will ask fr a file-name if multiple rws are selected. When a USB Stick exists, it will be asked whether t stre t usb drive r t internal hard drive. In an additinal pp-up a style must be selected. "Only Xml" = will create a xml file nly. "fixture + layer + layers@html@default.xsl" = an HTML File fr usage with an HTML Brwser. "fixture + layer + layers@csv.xsl = a CSV File which can be e.g. imprted t Excel. A flder "Fixture" r "Fixture_Layers" will be created autmatically, depending n exprted type. Select Fixture Type pp-up when exchanging fixture types (Edit Setup) displays the amunt f DMX channels and the amunt f instances per fixture type. e.g. FixtureType10(DMX 20 Ins. 2) If "Patch Readut Abslute Address" is activated in the patch menu the "Universe" Encder will be suppressed. DMX address f all universes can be addressed via the"address" Encder nly. Als the DMX addresses n the right side f the menu are displayed abslute. 3D envirnment can be mdified inside Setup/Patch Fixture Schedule / Fixture Psitins. 3d bjects are listed in a separate layer inside this dialgue. Fixture Types MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

8 2 new clumns in "Fixture Types" menu: "DMX Ftprint" and "Instance". Number f DMX addresses and instances is shwn. In the Inf area attribute t DMX address mapping f the selected fixture type is shwn. Virtual attributes are shwn belw. FixtureType and FixtureLayer Exprt - exprting multi selectin creates ne file per bject. The "Clean-up" buttn cnverts fixture types frm frmer shw files t cllect duplicate features t prvide a better verview in the calculatr. Attribute editr: "Identified As" clumn f sub-attributes shw als the unit f the physical value in "[]" if there is ne When pening Imprt Fixture Dialgue: keybard fcus is at manufacturer filter and screen encder fcus is at fixture type grid. Fixture Type Editr Caralln lib 9.6 fixture library included. MIB can be disabled per attribute inside fixture type editr. "React t Master" can nw be switched n/ff fr clur attributes even if there is n dimmer channel. When fixture types are imprted frm the library int a shw file they have extended channel sets. Minimum and maximum values fr attributes with physical values are nw displayed as e.g.. "pen Iris", "min Strbe", "max Frst". The ranges f the physical sub-attributes are shwn with units e.g. Unit f Psitin, Zm and Iris is "degrees", Strbe is "Hertz" and Gb rtatin is "RPM". Als channel-sets and mde dependencies f animatin wheels have been extended Fixture types with CMY clur mixing system: A lt f fixtures have mde dependencies n their clur channels r having integrated macr functins mapped t the upper part f CMY attributes DMX channels CMY attributes f these fixture types are cnverted t RGB by cnverting nly the range f the DMX channel cntrlling the clur. Setup/Patch and Fixture Schedule/ Fixture Type editr sub-attribute selectin dialgue is similar t attribute selectin dialgue. Fixture Type: Overlapping functins f channels r nn-unique natural t DMX mapping result in nn-perate-able fixture type. Diagnstic screen will shw errr message fr the user, when having such an errr in fixture type. Clning MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

9 Clning f fixtures: Setup / Shw / Clning: the menu "Prepare Clning" is divided int 2 parts: Left part f view displays the surce - right part f view the destinatin fixtures. Fixture have t be selected and applied t the left r right side using the left r right side "take selectin" buttn. Prepare will lead t the clning menu. Here can be chsen whether the prepared fixtures are clned in all sequences/presets/wrlds/... r nly in selected ("chsen sequences/presets/wrlds/..."). The buttn "Clne" will pen the "Perfrm clning" pp-up.the clne pririty can be defined here: "Lw Pri. Merge" = simple clning with lw pririty. Takes nly values which are cntaining in the surce fixture and are free in the destinatin fixture (n existing data f destinatin will be verwritten r deleted). "Merge" = Mixes Values frm the surce fixture int the destinatin fixture and verwrites als already existing values.values nly cntaining in the destinatin fixture and nt in the surce fixture are nt verwritten Overwrite" = All values f the destinatin fixture are verwritten with the existing and nn-existing values f the surce fixture" Imprt/Exprt Gb Bitmaps Setup / Shw / Imprt Exprt includes a user interface fr imprting and exprting Gb Bitmaps" Exprting Gb bitmaps t USB drives will exprt t /gma2/gbs/user_gbs flder. Gb bitmaps have t be cpied t this flder at the USB drive t be able t imprt them t a grandma2 npc r cnsle. Imprt/Exprt User Prfiles User Prfiles can be exprted and imprted at / Shw / Imprt/Exprt/User Prfile. Exprt menu displays all user prfiles f current shw file n the left and all user prfile xml files stred at /gma2/user_prfile flder f current selected drive at the right clumn. Enabling "Always ask fr Name" will prvide pssibility t custm label xml file when exprting. Imprt menu displays all user prfile xml files stred at /gma2/user_prfile flder f current selected drive at the left clumn. Buttn t the right tggles between imprt user prfile nly an imprt user prfile and create user. Enabling Always ask fr name prvides pssibility t rename user prfile and user when imprting user prfile. Exprt and imprt f user prfiles is limited t ne user prfile per file when using this dialgue. If yu wuld like t exprt multiple user prfiles int ne single xml file, please refer t grandma2 nline help cmmand line syntax fr exprting and imprting multiple user prfiles. When trying t imprt a file cntaining multiple user prfiles using Imprt/exprt menu, nly the first user prfile f this file will be imprted. All exprted user prfile xml files will be stred t /gma2/user_prfile flder f yur hard drive r usb drive. User prfiles which have been exprted with grandma2 v2.8.3 r earlier have t be manually cpied frm /gma2/imprtexprt t /gma2/user_prfile t be able t imprt these prfiles in grandma2 v2.9. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

10 User + User Prfiles Imprt/exprt user prfiles includes view buttn thumbnails. Imprt/Exprt User prfile can be dne using Imprt exprt menu r buttns in /Setup/Cnsle/User and Prfile Setup Cut-Cpy-Paste has been added t the User and User-Prfile dialgue. Cut-Paste desn't wrk fr User Administratr and guest and UserPrfile Default. If in Setup / Cnsle / User + Prfiles a user has the fcus, the buttn "Lgin" gives the ability fr a direct lgin. In case f passwrd prtectin the pp-up t lgin is displayed. In the headline the current user name is shwn. When cpying r exprting user prfiles, they always stre the mask pl and the infrmatin n which screens the menus are t be pened Netwrk MA Netwrk Cntrl New cmmand and buttn inside Setup /Netwrk /MA Netwrk Cnfig /Endsessin t end a sessin fr all sessin members. Setup / Netwrk / MA Net Cntrl: Current Fcus frame affects accessibility f buttns. Buttns withut functin fr current fcused bject (cnsle/sessin) will be greyed ut. MA Netwrk Cnfiguratin/DMX Ndes DMX Nde cnfiguratin can be exprted t and imprted frm a XML file. Setup / Netwrk / MA Netwrk Cnfiguratin / DMX Ndes: the buttn "Exprt Cnfig" saves the cnfiguratin f the DMX Ndes tab inside the "gma2 / netwrk_ndes" flder. The buttn "Imprt Cnfig" lads exprted cnfiguratin files and verwrites current DMX Ndes cnfiguratin with the ne frm the file. MA 8-Prt-Ndes can be cnfigured using / Setup / Netwrk / MA Netwrk Cnfiguratin / DMX Ndes Aut Create/Create Preset Reference Presets can be added t fixture types as preset reference. Setup/ Autcreate prvides access t create a preset reference and t create presets frm a preset reference. Preset reference is part f the fixture type and will be exprted and imprted inside the fixture type file. Preset references can be created via cmmandline. At first a fixture f a fixture type must be selected. With the cmmand "Stre Fixturetype x.5" all presets f MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

11 the currently selected fixtures are added t this fixture type. If a reference already exists, a pp-up ccurs. The cmmand can be restricted t single presettypes :"Stre Fixturetype x.5 if Presettype "clur". With "Autcreate Preset Fixturetype x" all preset f that type will be generated and t eventually existing merged (same name). With the extensin "/add" always new presets are added. This can be limited with "if" fr each presettype. Presets are identified by their name f each presettype and applicable verwritten. Example: "Stre Fixturetype x.5 /remve if Presettype "clur". Autcreate Presets creates preset label by merging channelset and attribute label. Misc Blind buttn can be disabled at Setup / User / Grand Master + B.O. etc. Update lcal cnsle rebt dialgue prvides a rebt nw buttn. Setup / Shw / Remte Inputs Setup: clumn "Macr" in the remte menu renamed t "CMD". Accrdingly the remte Type "Macr" has been renamed t "CMD" Views and Pls Layut View Imprvements Layut view: Fllwing elements can be shwn and visualized as a pl icns:effects, bitmap effects, filter, frms, grups, images, macrs, channel pages, executr pages, sequences, timecdes and wrlds" Clean-up f Stage View and Layut view title bar buttns and view ptins 1. Mve and Select title buttns were cmbined int ne list title buttn withut icns 2. Zm In, Zm Out title buttns have been exchanged by zm bar (already knwn frm stage stage view) zm bar can be hidden via layut view ptins. Deactivate zm n the screen encder. 4. Title buttn was renamed t "Reset camera" Title buttns in the layut view are custmizable nw. The Layut View ptins have been divided int 5 areas. Pl Element defaults: Basic adjustments fr pl elements are defined if they have been added with the "assign" cmmand int a new layut Fixt. / Chan. defaults: Basic adjustments fr fixtures and channels when they are added with the "stre" cmmand Layut Data: basic adjustments fr the layut itself e.g. "visible marker" MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

12 Tls: basic adjustments fr the layut e.g. zm Bar, zm Encder,Scrllbar deactivatin. Display f Dimmer value regarding fixture sheet ("Cue clurs") Title Buttns: Buttn in the title bar can be enabled/disabled. New are als "Pl Playbacks" in the headline Frames in Layut View: In the "Setup" mde f the layut view frames can be created(via the Encder bar). Frames are always displayed n the lwest level. T edit this level the ptin "Edit Rectangle" must be active. Images then can be selected in the edit menu r via the encder bar. If the frame shall nly visualize ne backgrund image, the selectin f the frame can be switched ff in the edit menu ("Grup Select" -> "ff") New structure f elements in layut: The display f a pl / fixture Element can have different levels. The lwest is the visualisatin f fixtures: Brightness, clur and gbs abve thse Images and Icns are displayed. These can cntain alpha channels, means they can be transparent. Text, Id Numbers and Dimmer Values are n Tp. Edit f Channel / Fixture elements: Pressing "Edit" and nt a fixture in the layut view the fixture editr cmes up. Same in"setup" Mde pens the editr fr the selected layut element. The assignment t a fixture can be exchanged by changing the ID Number. Additinal Text and adjustments like visualisatin, size r image / icn rtatin per element are pssible. In Tab "Subfixture" Element Channel Id and Fixture Id can be switched n r ff Editing f Pl Objects: Pressing "Edit" and then nt a pl element in the layut view, e.g. a preset, a "nrmal edit" will be executed, means the preset is taken int the prgrammer. Same in "Setup" Mde pens the editr fr the selected pl element. E.g. a preset can be exchanged via the Id as well. "Visualizatin": "Simple" -> shws the bject as usual. "Pl Icn" shws the pl element like in its wn pl. Fr preset and bitmap elements the display f the symbls can be adjusted via Tab "Pl" "Spt", and "Filled". Dimmer values and dimmer bar can be visualized fr grup pl elements "Filled" add clurs and "Spt" Gbs in additin. The values f the last channels / fixtures in the grup are used. Same fr display f markers, when there are switched n in the layut. Cpy in layut view : In setup mde pl elements, text, frame elements can be cpied with the "cpy" buttn. Press "Cpy", select pl element, click nt new psitin in layut. Fixtures and channels cannt be cpied. These can nly be used nce per layut Cpy f Layut Views: With cmmand "Cpy Layut 1 at 2 /merge" it is pssible t merge 2 different layuts. Layuts can be imprted with PSR (Partial Shw Read) as well. Clning fixtures can als be used t clne layuts. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

13 Vide attribute thumbnails are displayed in a layut nw (like in a Preset pl). Cmmand "Assign" and multiple tuch f bject wrks same as "Mve" Image Recmmendatins fr gma2 layut view: Frmat PNG Canvas Size max 240X240 Clur Black Image size max 180X180 Symbls utline 5 pixels 50% grey Symbls shall have alpha fill Area arund symbls shall be black Stage View and XYZ New Stage View camera mde "Link Selected". Stage views will fllw currently selected camera. Camera can be selected by tuching a camera bject inside camera pl r via cmmandline "Select Camera ID/Name" E.g. "Select Camera "Frnt" r "Select Camera 1" Stage view yellw ball ptins menu has been extended. Calibratin tab prvides access t fixture psitin calibratin dialgue Fllw tab prvides access t set z- ffset f the stage view fllw functinality. mask tab can be used t mask a stage view similar t masking any sheet. Title buttns tab prvides the pssibility t enable/disable title buttns. Fixtures can be edited using stage view. Pushing edit and tuching any fixture inside stage view r right muse clicking any fixture in stage view prvides access t edit fixture dialgue Stage View Setup encderbar prvides pssibility t "Reset Psitin" r "Reset Rtatin". Resetting Psitin will mve 3D mdels f current selected fixtures t XYZ psitin 0:0:0 Reseting Rtatin will reset fixture rtatin f current selectin t 0. New cmmandline keywrds "Mve3D [at X Y Z]" and "Rtate3D [at X Y Z]". Using Mve3D r Reset3D withut crdinates will reset current selected fixtures t zer. E.g. "Mve3D at " psitins current selected fixtures at X = 2.5, Y = -5 and Z = 3.3 Stage View Setup mde encder bar psitin encders (x, y, z) shw range f values min..max. Stage View fixture calibratin dialgue New functinality and new buttn "Reset all Values" MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

14 Selectin f channels r fixtures in stage view has been imprved. Stage View ptins defaults can be adjusted per user prfile. Optins can be fund at Setup/User/Windws Settings/Other/Stage Calibrate fixture dialgue gt a new buttn (Find alternative flip slutin) t calibrate fixtures having wrng physical values. Pushing this buttn will tggle thrugh all 4 pssible calibratin psitins. 3D bject parameters can be mdified at the fixture psitin dialgue f the setup (Patch and Fixture Schedule r Live Setup). Same as in MA 3D bject Size input readut can be tggled between meters and Scaling factr. Stage Markers and XYZ Offset can be stred selectively t different cues. Stage View Fllw Mde default has been defined by "N tilt flip" Aut-generated 3d bject fr stage marker: range ball with 25cm diameter Stage markers are autmatically cllected inside a Stage marker flder in 3D assert view. Channel and Fixture Sheet New Edit Fixture dialgue title buttns Next and Previus t edit next r previus fixture withut having t clse and repen the editr. Sheet and Stage view title bar set buttns can be edited inside the sheet ptins title buttns tab. Readut decimal and hex have been split. Decimal and hex always shws 8bit values while decimal16 and hex16 always shws 16bit values. Sequence Executr Sheet "I.Fade and I.Delay are editable inside executr sheet. Right muse click will delete individual timing, hlding dwn middle muse buttn and mving muse up r dwn will increase r decrease all individual timings. " Tracking Sheet Additinal warning message bx when trying t delete the cmplete cntent f a sequence frm the tracking sheet edit dialgue Cntent Sheet New Cntent sheet srting ptin. Cntent sheet can be srted by Fixture ID r Channel ID first. "Remve", "Off" and "Deactivate" buttns added t cntent sheet cell edit calculatr. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

15 DMX Sheet DMX View: new ptin "Readut is abslute DMX Address" - universe verlapping Timecde In additin t sequence executrs als grupmasters, specialmasters, effects assigned t executrs and bitmap effects assigned t executrs can be recrded int a timecde shw. Timecde shws can be merged tgether. Timecde Tracks, Timecde Subtracks and Timecde Events will be merged. Timecde shw ptins will nt be altered. Timecde ptins can be saved t default and laded frm default using timecde ptin title bar buttns. Default ptins will be used when creating new timecde pl bjects. Adjustment f "Pre Rll" and "After Rll" fr SMPTE and Midi pssible ->. Setup / Cnsle / Timecde. Timecde editr ptins have been mved frm separate ptins buttn t Title bar Yellw Ball ptins menu. Jumping in timecde shws is pssible via cmmandline. Syntax: G Time (time) Timecde (number). E.g. "G Time 3h5m Timecde 1" Timecdeshw 1 will start and jump t 3 hurs and 5 minutes. "Pause Time 6s Timecde 4" will psitin timecde shw 4 at 6 secnds and pause timecde shw 4. "Gt Timecde X" r "Lad Timecde x" will prvide a list f events f timecde x t select the event t jump t. Pressing the buttn Time (Fade) will be prcessed as keywrd time in cmbinatin with timecde. New Cmmandline Time unit input pssibility; dt separated input [h].[m].s[.1/10s]. E.g. "Gt Timecde x Time 3" jumps t 3 secnds. "Time 3.4" = 3 secnds and 40/100 frames. "Time 2.3.4" = 2 minutes 3 secnds and 40/100 frames. "Time " = 1 hur 2 minutes 3 secnds and 40/100 frames. Timecde shws can be laded frm anther shw file using partial shw read Timecde FastOff event is in the list f manually addable events Misc Special dialgue clur can be assigned t any view using Create basic windw dialgue tab ther. In additin t the functinality already knwn frm the special dialgue, labels belw the clur picker can be hidden. New view: Create basic Windw / Playbacks / Running Playbacks. All running playbacks are displayed. (Similar t temp. Off menu). In the headline there are 4 buttns: "Only my Playbacks" shws nly playbacks started with wn user prfile. "Preview Playbacks" shws nly in Preview Mde started playbacks. If "Link MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

16 Encders" is active, Playbacks can be perated in the cmmand line and if "Off Mde" is n, playbacks can be directly switched ff by clicking n them. The selected executr has in the first clumn a green backgrund. In the ptin menu the fnt size is adjustable and an inf clumn can be turned n. All ptins can be turned n and ff in the headline as "Title Buttns". New User-Pl: "Camera". "Stre" n an empty pl bject creates a new 3d Camera, which can be psitined. Clicking n the pl bject will select this camera (bject gets green). Wrks via cmmand line as well: "Select Camera "Frnt" r "Select Camera 1". "Pictures in layuts: There is a new pl t administrate pictures which can be used in the layut view as "Image" which can be assigned t the bjects -> Create Basic Windw / Pls / Images. Frmats: bmp, gif, jpg, lssless jpg, png, tif, targa. T avid huge shw file, the size is limited per picture t 2MB, and the ttal size f the image pl t10mb. Reslutins larger than FullHD (1920x1080) are dwnscaled autmatically. With "Stre" r "Edit" a pl bject can be created r mdified. With the buttn "Lad Image" in the editr Pictures can be laded int the pl frm the "Bitmaps" Flder f the desk r the "gma2" Flder f a memry stick. They are then part f the shw file. The reslutin and the size is displayed. In the ptin menu f the image pl the symbl size can be chsen (small / big) " Cmmand sectin windw height limit has been remved. Cmmand sectin can be scaled up t any screen size bigger Minimum size f cmmand sectin is 2x3 grid cells. OnScreen keybard has been added t Inf View multi-line editr. Cmmandline Stre Presettype X Please will stre at the next empty pl bject f the referring pl. String a new preset generates a default name cntaining type f preset and index f preset inside preset pl. E.g. Stre Preset 2.5 will generate a Psitin preset labelled "Psitin 5" Mve/cpy/insert can be used t cpy ONE empty bject. New cmmandline cmmand BlackScreen [Screennumber]. The cmmand BlackScreen will blackut all screens. The cmmand BlackScreen 5 will blackut screen 5. Screens can be reactivated using the buttn "Shw Screen" r "Shw All Screens" in the bttm right crner f each screen f by using the cmmand BlackScreen Off. Cmmandline Feedback displays nt existing cmmands als. A yellw message shws "Cmmand nt executed". If SpecialMaster 2.4 is n ("SpecialMaster "Snd ut" at 100"), errr sunds will be replayed (Nt in grandma2 npc) MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

17 New cmmand IfOutput Fade(Delay) [time range] [Executer] selects all fixtures f a sequence currently using an individual fade r delay time. E.g. Ifutput Fade 3 Executr 1 selects all fixtures stred r tracked with an individual fade time f 3 secnds at current cue f the sequence assigned t executr 1. Ifutput Fade Executr 1 selects all fixtures stred r tracked with any individual fade time at current cue f the sequence assigned t executr 1. Ifutput Fade 1 thru 10 selects all fixtures stred r tracked with an individual fade time between 1 and 10 secnds at current cue f selected executr. New cmmand ptin "At": "/status". Example: "Fixture 1 thru 5 at Cue 5 /status". Result: Fixture 1 thru 5 get the values frm Cue 5 including tracking values frm Cue 0 t 4 active in prgrammer" Cmmandline cmmand "Edit DMX x" r pushing Edit hard key and tuching any cell inside DMX Sheet pens edit fixture dialgue f fixture using this DMX address x. Stre Cue 2.1 thru 3.1 will create fllwing cues: Abslute and relative negative Values in the cmmandline can be distinguished by nt adding a blanc between "minus" and number. Example: "Attribute "Tilt" at -10" sets abslute (negative) Value -10. "Attribute "Tilt" at - 10" sets the value relative - 10 t the current value relative. This may have impact n existing macrs (e.g. add a value (+5) nw (+ 5) Screens can be cpied t ther screen using new cpy screen x at y cmmand. Screens can be merged r verwritten. Hard key cmbinatin MA+View adds keywrd screen t cmmand line. Off Time f Executrs can be mdified via cmmandline. Example 1: Assign Executr 1 /OffTime = 10. Example 2: Assign Executr 1 /OffTime = "default". Similar the Default Off Time: Example: "Assign Rt 3.3 /ff= 5s"." Fixture At Fixture will extract preset infrmatin, if target fixture is nt included in preset currently used by surce fixture. Cmmand "Fixture x at Fixture y" des nw als wrk when the rigin (y) is deriving frm a sequence with Master Fader less 100% Playback Master are assignable t sequence executrs via cmmandline. Example: "Assign Executr 1.1 /PlaybackMaster = 2" (0 fr nne). T assign a Playback Master t an empty executr: "Assign Specialmaster "Playback 2" Executr y" Telnet cmmands can be sent frm grandma2 cmmandline directly using the Syntax: Telnet IP-address [Prt] "String" Current active pages can be changes per userprfile via cmmandline using a cmmand like "Assign Userprfile x /CurrentFaderPage=1" pssible parameters are CurrentChannelPage CurrentFaderPage, CurrentButtnPage It is nt pssible t jump t nn-existing executr r channel pages. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

18 Cmmand SetUserVar wrks als with flat values Cmmand At EffectFrm "frm name" (e.g. "PWM") wrks Attribute and feature keywrd in cmbinatin with numbers respects current presettype selectin. Cmmandline supprt t assign lps in sequences. Assign Cue X /Lp=Y. Executrs New executr cmmands and executr buttn assignments: Flash+On, Flash+G, Swp+On, Swp+G. FlashON flashes executr, but des nt switch ff executr when releasing flash buttn. FlashGO flashes executr, steps t next cue and des nt switch ff executr when releasing flash buttn. SwpOn swps executr, but des nt switch ff executr when releasing swp buttn. SwpG swps executr, steps t next cue and des nt switch ff executr when releasing Swp buttn. New Executr buttn functinality, "Lad Next" and "Lad Prev". This will lad the next/prev cue f the current laded cue. 2 new Special Master: "StepInFade" and StepOutFade". Special Masters are devided int 5 grups f functins. Necessary t avid renumbering fr future extensins. Macrs which cntain special masters must be adapted. Already dne fr predefined macrs Default Master Grand Master Speed Master Rate Master Playback Master " Keys X1 - X20 can have a fixed link t Exec > "Setup / User / Settings" Optin "XKeys always fr Exec". If turned n, User 1+2, and special menus (e.g. clur Picker) are nly perable with tuch-screen sft-keys. New Sequence Executr assign menu ptin "Lp breaking G". With this ptin activated a g cmmand will break a currently running lp and will step t the next cue after the lp. Sequence Executr assign menu defaults als include playback masters. Sequence Executr assign menu defaults als include Input filter. Sequence ptin "Frced Psitin Mde" can be adjusted using Edit Sequence dialgue Encderbars MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

19 Special dialgues can be mved t ther screens using Change screen title bar buttn. Encder Bar Frames fllw current layer, value layer Yellw, fade layer Green, delay layer Orange and all effect layers Magenta. New buttn "Link Encder" in "Special dialgue Shaper". This buttn switches encders fr all shaper mdes Angle Mde (Invert B)" inverts the B attribute. In this mde the encder changes all psitive and negative values at the same time. "Set All" selects all attributes. "Invert All" inverts selectin A muse click n the attribute value pens the calculatr. Pressing n the encder switches the attribute selectin." 100mm Fader n-screen buttns are using default buttn assignment f specialmaster assigned t the referring 100mm fader. In the DMX Encderbar (pen e.g. with "Channel Channel 1") there is a new buttn "Universe / Abslute". In Psitin "Universe" the DMX address can be adjusted as usual with the Encders "Universe" and "Address". In psitin "Abslute" nly the "address" encder can be used. Encder buttn menu Clear Screen sft buttn will als clse any temprary windw r pl. Encder bar encder mde "Link defined" and "Link defined active" have been replaced by the new mdes "Link Filter" and "Link Filter active" These ptins use the current setting f the filter pl respectively cmmand filter New Calculatr New calculatr: multiple entries in ne line e.g. "0 thru 50 thru 0 thru 100" are pssible. With the + - * / Buttns values can be changed. When an attribute has mre functins, this is displayed abve the input line. In the right area nly the "channelsets" f the selected "Functin" are displayed. Fr each functin als "Min" and "Max" Buttns exist. When the calculatr is pen, it is pssible t scrll thrugh the channelsets via the encder - by pressing and turning thrugh the feature. Calculatr +/- buttn can be used t input abslute values. Input f cmplex ranges des wrk with the numeric keypad as well Presetbar readut is updated by fllwing tracking and cntent sheet in additin t fixture and channel sheet. User ptin "Single Digit input" is used in cmmandline and calculatr fr dimmer attributes nly. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

20 Misc PsiStageNet (PSN) realtime tracking prtcl added. Setup / Netwrk / PSN Netwrk Cnfiguratin. This allws t transmit XYZ Stage Psitins t the grandma2 System. Every tracking system which supprts that prtcl can drive stage marker and X,Y,Z psitins f mving lights. New ios MA Remte app v Supprt fr grandma2 v2.9 and ipd/iphne 5 added. Create basic windw clean-up: All system windws have been mved frm the ther tab t the new system tab. Last called View buttn f each screen is highlighted. The headline f the update menu is shwn whether a filter is active. Stre and label message bx title bar shws target bject. A pp-up warns the user if trying t label any bject using illegal characters. grandma2 ultralight screen encder 2 can be assigned t an external screen using Faderwing and Mnitr. T assign the encder t an external screen mve the screen icn abve the fader sectin f the grandma2 ultralight icn. Reslutin f virtual Dimmer and XYZ Attributes has been increased t 24bit. Prgrammer values f all users are nt active anymre when lading a shw file. (regardless f the last strage state) AT Filter dialgue can be mved t ther screens using Select screen title bar buttn. Optin buttns in pp-ups will be displayed with a checkbx. E.g. Cpy Cue pp-up Cue nly ptin buttn. Tls / Lgin Screen: The keybard "TAB" can be used t mve cursr between "name" and "passwrd" entry field. Imprvement in Setup Dialgue-> When entering the setup all submenus fr the 4 main tabs are displayed. With "Hme" yu get back frm a sub menu t this setup verview. Shw files frm ADB cnsles can be cnverted via "ASCII Shw Read" t grandma2 shw files. grandma2 CITP implementatin supprts different versin fr the same structure in CITP messages. S yu shuld nt face LSta message errrs with Hipptizers anymre. CITP Prgress bars fr Green Hipp Update Thumbnails functinality has been imprved. MBOX Cntent attributes are detected autmatically when chsing a MBOX Fixture layer in the CITP menu grandma2 npc MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

21 New grandma2 npc Mde "Single Screen (Internal nly). grandma2 npc Mde can be changed via ptins dialgue(yellw dt left upper crner f the cmmand screen). In "Single Screen (Internal nly)" mde, all internal screens can be accessed in ne single MS Windws windw and external mnitrs will be displayed in tw additinal MS Windws windws. Mrever the buttn "CmdWing Bar" allws t adapt the encderbar n screen 2 t an MAnPC cmmand wing layut (means additinal 6 playback fader) New windws start menu shrt-cut t launch grandma2 npc "Launch npc CleanStart". Using this shrt-cut will reset all grandma2 npc Windws t default size and starts grandma2 npc with a blanc shw. Cmmand Wing bar can be chsen as windw frm the create basic windw ther tab. This bar cntains a cmmandline, an encder bar, a 100mm fader GUI and a six executr wide mini playback view. grandma2 npc select screen buttns labels change t the fllwing labels when cnnecting a grandma2 npc wing."screen 2" = "CMD Wing", "Screen 3" = "Fader Wing 1", "Screen 4" = "Fader Wing 2" grandma2 npc native reslutin has been increased t 1352x800 t be able t display riginal sized view buttns. grandma1t2 Shw Cnverter grandma1 STROBE and STROBE_RATIO Attributes are cnverted t grandma2 SHUTTER Attribute t be cmpatible with grandma2 library. Further cnversin imprvements: Executr Assignment, Attribute Names, Presettype Names, 16bit Attributes, "React t dim", clur mixing system, Attack and Decay in Effects, Effect Links in Cues, Page numbers in Cue links, Macrs, Agenda entries. Effects, Grup Master and Special Master in timecde shws are cnverted. The Feature "PanTilt" is cnverted t "Psitin". Effects and Cues d nt create empty lines anymre" Fixed Bugs and imprved functinality Imprting fixture layer via cmmand line in anther shw des nt crash the desk anymre Imprt Fixture Type input filters using n screen keybard are autmatically applied. Editing a Faderwing inside graphical Faderwing + mnitr setup has been imprved. Cmmand Dmx 2.1 Thru 20 At 100 means Dmx 2.1 Thru 2.20 At 100 Maximum values fr timecde ptins "length" and "ffset" have been increased t 255h59m59s. Setting a Speedmaster t a specific value via cmmandline will reset any speedmaster scaling. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

22 Unblcking cues in the tracking sheet in a netwrk envirnment des nt crash the desk anymre Channel Sheet redraw bug after tggle vertical Scrllbar has been fixed. "Link Fader and Buttn Page" ptin will nt ffset Fader and buttn pages anymre when using channel pages in between. Setup / Shw / Patch and Fixture Schedule: Newly added layers r fixtures are immediately srted t crrect grid psitin grandma2 NPU USB muse supprt has been fixed. Red Prgrammer markers f virtual dimmers are als displayed in Layut View DMX Layer readut mde. Errr handling when patching fixtures cntaining patch cllisins f subfixtures has been imprved. Newly created shw files als display default gb and clur wheels symbls in a fixture sheet, regardless f current prgrammer status. Setting Executrs cntaining ff times t specific values via cmmand line respects Aut Start and Stp setting. Mixed up crssfade A/B has been fixed. Crssfade A fades decreasing values, Crssfade B fades increasing values. Disabling GrandMaster, Highlight, Sl, Blind,... resets the disabled buttn functin t default state Layut View: Value display and readut Optin (DMX, Output, Value) is stred in shw file. Setup / Netwrk / MA Netwrk Cnfiguratin / npc: Clumn type displays the type f wing (MA npc cmmand r MA npc fader wing) Edit Fiture dialgue grid can be srted by highlight clumn. Frced Fixture ID f single fixture grups has been remved. Fixture ID can be remved when labelling a single fixture grup. Setup / Netwrk / MA Netwrk Cnfiguratin / DMX Ndes: The clumn "Firmware" shws firmware versin f MA 4Prt Ndes. Actin buttns can be edited again using the edit hardkey and pressing an actin buttn afterwards. Setup / Netwrk / MA Netwrk Cnfiguratin / DMX Ndes: The first 2 clumns (id, name) are always visible when scrlling hrizntal Fixture names display f dynamic channel faders has been imprved. Mving masks in pl des nt destry link t links t sheets anymre. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

23 Tracking sheet layer Values nly is displayed crrect in cmbinatin with merge same values ptin. Dynamic channel fader pages can be used in cmbinatin with clur readut CMY Channel page flash buttns respect wrld f current user. It is nt allwed t cpy r mve fixtures r layers in live setup. These actins can be dne in full edit setup nly. The cmmandline feedback view can display mre characters per line. E.g. List Executr shws all pssible executr ptins. The cmmand "gt cue "name" "has been fixed. Max amunt f sacn input universes per grid rw is ne universe. Amunt cell f sacn input rws are nt editable. Fixed clur preset imprt frm grandma2 v2.7 Sequence Sheet fllw cue fade time display has been fixed. Empty Fixture sheet cells in vertical styled fixture sheets d nt shw ff-clurs anymre. Changing sheet clur readut changes als encder bar readut. Visible buttn glwing added at Autcreate dialgue Setup/Patch Only/Fixture Psitin ID and name clumn is always visible, even when scrlling hrizntally. The cmmand "Selfix Bitmap x" selects all fixtures in a bitmap, even the bitmap is nt linked t any executr Inf windw des nt shw wrng bject numbers fr fixtures anymre Patched DMX addresses f break 2-4 are displayed n the left side f the patch menu, when they belng t a subfixture grandma1@grandma2 hardware default keybard layut has been set t english. Readability f Smart View Icns labels area has been imprved. Backup Server Windws share munting has been fixed. Netwrk cnfiguratin DMX nde clean-up: Mde clumn prvides access t available mdes f a MA 4prt nde nly. Fixed "/use=allfrselected" bug when string XYZ values using this ptin. MAtricks buttn is available while having encders linked in special clur dialgue Effect editr fllws user prfile mixclur readut switch. MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

24 Sessin cllisin pp-up des nt disappear anymre when unlcking a desk. Kncking in XYZ values in cmbinatin with markers kncks in crrect XYZ ffset values. Editing Multiple effect lines at the same time will keep attribute selectin when clsing effect layer calculatr. Reassign anther SpecialMaster t an executr already cntaining a special master autmatically lads special master buttn defaults. Clur Special dialgue link encders have been changed t relative t be able t use them in cmbinatin with Align. Effect Editr encder push and turn is 10 times faster than turning withut push. Effect Editr / Edit Effect Line Lw and High value wheels handling f template effects has been imprved. Prgrammer effect encder bar supprts "Off Effect", "Release Effect" and "Stmp Effect" als when set t "All" When mving executrs (mve Executr 1 at 2) the mtr fader f the empty exec will be mved t 0 "The "Snap Percent" values f a sequence are beyed when being executed as a chaser. The percent value will be calculated t the fade time f the chaser When desk is lcked and nn-mtrized faders are mved, utput des nt jump anymre after unlcking the desk MSC (MidiShwCntrl) Slave takes ver when becming Master Off menu is wrking als with a few hundred pages f allcated executrs Cmmand "Update Cue" cmbined with a name will nly be executed when the exact name already exists Trying t lgin with nn-existing user using cmmandline lgin cmmand will nt lgut current user anymre. Cmmand "Attribute at 50" withut fixture selectin des nt wrk anymre Cmmand "Kill" des nt exist fr bitmap and effect executrs anymre, because it is nly pssible fr sequence executrs With the editr in the cntent sheet individual timings can be remved LED Fixtures with a real dimmer are displayed in the utput layer f the layut view with same intensity as LED Fixtures with virtual dimmer. Cmmand Stre If Attribute "dim" + "pan" EndIf wrks with bth attributes MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de

25 Learn speed functin fr Bitmap effect executrs has been implemented. Bitmap effect editr buttn naming has been changed. Basic tab scale mde has been renamed t "Scale Bitmap". Tls tab Scale 1:1 and Scale Fit has been renamed t Scale Mdulatr 1:1 and Scale Mdulatr Fit BPM speed master is assignable t bitmap effect playbacks Partial Shw Read: When imprting a shw via PSR int an existing shw which cntains multipatches, these will be nt be destryed anymre "Partial Shw Read: Playback Settings f executrs will be taken crrect int a shw(pririty / Off On Overwritten)." Selecting Fixtures using cmmandline will be executed withut please when tuching inside the clurpicker dialgue afterwards. Timecde shw ptin "Status Call" can als be used when timecde signal has been interrupted and cues were triggered manually. Timecde editr des nt autmatically jump t next event deleting current event. Creating Reprts fr USB exprt using the List cmmand will autmatically create new flder "Reprt" inside USB drive gma2 flder structure. Wrkflw t create reprts fr USB: Chse USB drive in backup menu, select an executr with assigned sequence, "List Cue /Filename="mycuelist" Clne cmmand respects lcking f bjects. It is nt pssible t clne new fixtures int lcked bjects. Lgged in user will nt reset t administratr when receiving an shw dwnlad frm a slave cnsle leaving Patch and Fixture Schedule. Agenda calculatr mnth and year buttn labels have been fixed. grandma2 npc grandma2 npc Encder Mde Rtatin reslutin has been decreased s ne turn (360deg) will be the same value change as when turning cnsle encders Windws8 grandma2 npc Wing driver are installed autmatically when installing grandma2 npc npc Faderwing + mnitr setup: switch screen will exchange screens as expected. Users withut admin rights are allwed t shutdwn grandma2 npc grandma2 npc executr views display empty executrs with a grey frame instead f an range ne Appendix MA Lighting Internatinal An der Talle D Paderbrn Germany Tel / Fax / inf@malighting.de