USER MANUAL. L73** Digital Series M83** Digital Series

Transcription

1 USER MANUAL L73** Digitl Series M83** Digitl Series

2 Contents INSTALLING YOUR TV Sfety Preutions...4 Instlltion n importnt informtion...5 The remote ontrol...7 Inserting tteries n effetive rnge...7 CONNECTING YOUR TV Conneting externl equipment...8 Conneting n HDMI evie...9 To onnet n HDMI evie...9 HDMI s ARC (Auio Return Chnnel) feture...9 Conneting n HDMI CEC Control omptile evie...10 Conneting omputer...11 To onnet PC to the HDMI terminl...11 To onnet PC to the RGB/PC terminl...11 Conneting home network...12 To onnet the TV to home network - Wire...12 To onnet the TV to home network with n internet onnetion - Wireless...12 To onnet the TV to the PC with Intel Wireless Disply...12 Controls n input onnetions...13 Swithing on...13 Using the TV ontrols n onnetions...13 Using the menu system...14 SETTING UP YOUR TV Strtup Applition...15 Quik Setup...15 Ant/Cle/Stellite (if ville)...20 Stellite Settings...21 Auto Tuning...22 ATV Mnul Tuning...23 Tuning...23 Skip...24 Sorting positions...25 DTV Mnul Tuning...25 Mnul Tuning...25 Mnul Tuning for DVB-C...26 Mnul Tuning for DVB-S...26 DTV Settings...26 Chnnels (Antenn/Cle)...26 Chnnels (Stellite)...27 Stny Chnnel Upte...27 Lotion setting...27 Anlogue swith-off...27 Generl ontrols...28 Quik Menu...28 Seleting hnnels...28 The Time Disply nlogue only...28 Stereo n Bilingul trnsmissions...29 Using 3D funtions...29 Viewing 3D imges Swithing isply moe or seleting 3D formt.. 30 Setting the uto strt moe Ajusting 2D to 3D Depth Setting the 3D PIN oe Setting 3D Strt Messge Setting 3D Lok Setting 3D Timer Lok Setting Enle 3D Timer Displying 3D Importnt Info Swithing left n right imges Soun ontrols Volume ontrols n soun mute Dul Blne Bss, Trele TV Mounting (Wll/Tle) Dynmi Volume Auyssey ABX Dynmi Rnge Control Auio Level Offset TV Spekers On/Off Hephone Settings Auio Desription Wiesreen viewing Piture ontrols Piture Moe Piture preferenes Reset ColourMster Bse Colour Ajustment Colour Temperture Auto Brightness Sensor Ative Bklight Control Blk/White Level MPEG NR Noise Reution DNR Digitl Noise Reution Resolution ClerSn Resetting the vne piture settings Expert Piture Settings Automti Formt (Wiesreen) :3 Streth Piture Position Piture still HDMI Informtion Disply Wireless LAN Informtion Setting up the Network Wireless Setup Avne Network Setup DNS Setup Network Connetion Test Using the softwre keyor Network Devie Setup Apps Control Profile TV Power On Control (Ative Stny) Mei Renerer Setup Devie Nme Setup USB HDD Reor Funtion... 51

3 Setting up the USB HDD for reoring...51 To reor DTV progrmmes (One Touh Reoring)...51 How to set reorings vi the Progrmme Guie...52 To hek, eit or elete sheuling informtion..54 To view reore progrmme...54 Opertions from the Lirry sreen...55 Reoring Setup...56 Sheuling priority...57 Using the Clou TV Servie...57 Using We Browser...57 Using Skype...59 Using Hyri TV Stnr (if ville)...64 Using Intel Wireless Disply...64 Intel WiDi Devie Nme...65 Devie List...65 Using the Mei Plyer...65 Bsi opertion...66 Viewing photo files (on mei server or USB evie)...67 Viewing movie files (on mei server or USB evie)...69 Plying musi files (on mei server or USB evie)...72 Other fetures...73 Pnel Lok...73 Blue Sreen...73 Netflix...73 The timers...74 Progrmme Timers igitl only...74 On Timer...74 Sleep Timer...74 Energy Sving Settings...75 Automti Power Down...75 No Signl Power Down...75 Digitl on-sreen informtion...75 Informtion...75 Using EPG (Eletroni Progrmme Guie)...76 Using Brost Guie...76 Genre seletion/serhing...77 Digitl settings prentl ontrol...77 Prentl PIN Setup...77 Prentl Setup...78 Digitl settings Chnnel Options...78 Seleting fvourite hnnels...78 Fvourite Chnnel List...78 Skip hnnels...79 Loking hnnels...79 Digitl settings other settings...79 Sutitles Auio lnguges Common Interfe Softwre Upgre n Lienes Serhing for New Softwre Network Upgre Softwre Lienes System Informtion n Reset TV System Informtion Reset TV PC Settings Horizontl n Vertil Position Clok Phse Smpling Clok Reset Input seletion n AV onnetions Input seletion Lelling vieo input soures Digitl Auio Output Using HDMI CEC Control Enle HDMI CEC Control TV Auto Power Auto Stny Amplifier Control Initil Speker Setting HDMI CEC Control input soure seletion HDMI CEC Control one touh ply HDMI CEC Control system stny Using MHL TV funtion Conneting n MHL-omptile evie Operting n MHL-omptile evie MHL Setup TEXT SERVICES Text servies Seleting moes Text informtion Nvigting pges using Auto Nvigting pges using LIST Control uttons PROBLEM SOLVING Questions n Answers INFORMATION Informtion Liene informtion Cutions n other informtion for 3D Speifitions n essories During the life of your TV firmwre uptes will e me ville to ensure tht your TV mintins optimum performne: If your TV is onnete to the internet, firmwre will e utomtilly me ville. If your TV is not onnete to the internet, you n ownlo the ltest version of firmwre from *Some fetures re limite ue to lol legisltion n my not e ville in ll ountries. 3

4 INSTALLING YOUR TV Sfety Preutions This equipment hs een esigne n mnufture to meet interntionl sfety stnrs ut, like ny eletril equipment, re must e tken to otin the est results n for sfety to e ssure. Plese re the points elow for your own sfety. They re of generl nture, intene to help with ll eletroni onsumer prouts, n some points my not pply to the goos you hve just purhse. Air Cirultion Leve more thn 10 m lerne roun the television to llow equte ventiltion. This will prevent overheting n possile mge to the television. Dusty ples shoul lso e voie. For wll mounte positions t lest 2.5 m gp ws retine from the wll n the 10 m ws kept ler roun ll eges of the TV. Het Dmge Dmge my our if the television is left in iret sunlight or ner heter. Avoi ples sujet to extremely high tempertures or humiity. Ple in lotion where the temperture remins etween 5 C min. n 35 C mx. DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND LIVE PARTS. THE MAINS PLUG IS USED AS THE DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE. Do not DO NOT ostrut the ventiltion openings of the equipment with items suh s newsppers, tleloths, urtins, et. Overheting will use mge n shorten the life of the equipment. DO NOT llow eletril equipment to e expose to ripping or splshing or ojets fille with liquis, suh s vses, to e ple on the equipment. DO NOT ple hot ojets or nke flme soures, suh s lighte nles or nightlights on, or lose to equipment. High tempertures n melt plsti n le to fires. WARNING: To prevent the spre of fire, keep nles or other open flmes wy from this prout t ll times. Mins Supply The mins supply require for this equipment is V AC 50 Hz. Never onnet to DC supply or ny other power soure. DO ensure tht the television is not stning on the mins le. DO NOT ut off the mins plug from this equipment, this inorportes speil Rio Interferene Filter, the removl of whih will impir its performne. IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN. Do DO re the operting instrutions efore you ttempt to use the equipment. DO ensure tht ll eletril onnetions (inluing the mins plug, extension les n inter-onnetions etween piees of equipment) re properly me n in orne with the mnufturers instrutions. Swith off n withrw the mins plug efore mking or hnging onnetions. DO onsult your eler if you re ever in out out the instlltion, opertion or sfety of your equipment. WARNING: To prevent injury, this pprtus must e seurely tthe to the floor/wll in orne with the instlltion instrutions. See pge 5. DO e reful with glss pnels or stns on equipment. DO use soft, ry loth to len the unit. DO NOT use mkeshift stns n NEVER fix legs with woo srews. DO NOT leve equipment swithe on when it is unttene, unless it is speifilly stte tht it is esigne for unttene opertion or hs stny moe. Swith off y withrwing the plug, n mke sure your fmily knows how to o this. Speil rrngements my nee to e me for people with isilities. DO NOT ontinue to operte the equipment if you re in ny out out it working normlly, or it is mge in ny wy swith off, withrw the mins plug n onsult your eler. DO NOT push/pull CI CAM t tilt to prevent rekown of COMMON INTERFACE. WARNING: Exessive soun pressure from erphones or hephones n use hering loss. ABOVE ALL - NEVER let nyone, espeilly hilren, push or hit the sreen n inet k, or push nything into holes, slots or ny other openings in the se. These tions will mge sreen or internl prts. NEVER guess or tke hnes with eletril equipment of ny kin - it is etter to e sfe thn sorry. 4

5 INSTALLING YOUR TV Instlltion n importnt informtion Where to instll Lote the television wy from iret sunlight n strong lights. Soft, iniret lighting is reommene for omfortle viewing. Use urtins or lins to prevent iret sunlight flling on the sreen. Ple the TV on stle, level surfe tht n support the weight of the TV. In orer to prevent injury n mintin stility of this pprtus, seure the TV using the fixing in the stn. Srew (supplie) The LCD isply pnels re mnufture using n extremely high level of preision tehnology; however, sometimes some prts of the sreen my e missing piture elements or hve luminous spots. This is not sign of mlfuntion. Mke sure the television is lote in position where it nnot e pushe or hit y ojets, s pressure will rek or mge the sreen. Also, plese e ertin tht smll items nnot e inserte into slots or openings in the se. Avoi using hemils (suh s ir refreshers, lening gents, et.) on or ner the TV peestl. Stuies inite tht plstis my weken n rk over time from the omintion effets of hemil gents n mehnil stress (suh s weight of TV). Filure to follow these instrutions oul result in serious injury n/or permnent mge to TV n TV peestl. 9 mm 20 mm 4 mm Stn style is epenent on moel When using Wll Brket Use wll rket pproprite for the size n weight of the LCD TV. Two people re require for instlltion. Instll wll-mount from nother mnufturer. 1 Unplug n remove ny les n/or other omponent onnetors from the rer of the TV. 2 Crefully ly the front of the unit fe own on flt, ushione surfe suh s quilt or lnket. 3 Follow the instrutions provie with your wll rket. Before proeeing, mke sure the pproprite rket(s) re tthe to the wll n the k of the TV s esrie in the instrutions provie with the wll rket. 4 Alwys use the srews supplie or reommene y the wll mount mnufturer. Removing the Peestl Stn: 1 Crefully ly the front of the unit fe own on flt, ushione surfe suh s quilt or lnket. Leve the stn protruing over the ege of the surfe. NOTE: Extreme re shoul lwys e use when removing the peestl stn to voi mge to the LCD pnel. 2 Remove the over n srews. Srews 3 One you hve remove ll srews holing the peestl stn in ple, remove the peestl stn from the TV y sliing the peestl stn wy from the TV. When using MHL (Moile High-efinition Link) Interoperility with MHL evies of other mnufturers is not gurntee. Toshi oes not provie ny gurntee, therefore, ginst opertionl filure suh s tht esrie elow when n MHL soure is onnete to the TV. - No piture or soun - Some of the funtions o not work y remote opertion from the TV If the MHL oes not work properly, lso ontt the mnufturer of the soure evie for vie on its use. 5

6 INSTALLING YOUR TV Plese tke note The igitl reeption funtion of this television is only effetive in the ountries liste in the Country setion of the Instlltion menu. Depening on ountry/re, some of this television's funtions my not e ville. Reeption of future itionl or moifie servies n not e gurntee with this television. If sttionry imges generte y 4:3 rosts, text servies, hnnel ientifition logos, omputer isplys, vieo gmes, on-sreen menus, et. re left on the television sreen for ny length of time, they oul eome onspiuous. It is lwys visle to reue oth the rightness n ontrst settings. Very long, ontinuous use of the 4:3 piture on 16:9 sreen my result in some retention of the imge t the 4:3 outlines. This is not efet of the LCD TV n is not overe uner the mnufturer s wrrnty. Regulr use of other size moes (e.g. Super Live) will prevent permnent retention. EXCLUSION CLAUSE Toshi shll uner no irumstnes e lile for loss n/or mge to the prout use y: i) Fire; ii) Erthquke; iii) Aientl mge; iv) Intentionl misuse of the prout; v) Use of the prout in improper onitions; vi) Loss n/or mge use to the prout whilst in the possession of thir prty; vii) Any mge or loss use s result of the owner s filure n/or neglet to follow the instrutions set out in the owner s mnul; viii)any loss or mge use iretly s result of misuse or mlfuntion of the prout when use simultneously with ssoite equipment; Furthermore, uner no irumstnes shll Toshi e lile for ny onsequentil loss n/or mge inluing ut not limite to the following: loss of profit, interruption of usiness, the loss of reore t whether use uring norml opertion or misuse of the prout. The reoring funtion hs een esigne for privte use n entertinment in your home environment. Plese note tht ny ommeril use of the reoring funtion oul le to opyright infringement of uthors rights. Toshi sks you to respet the intelletul property rights of thir prties. Before reoring to evie onnete to the TV, mke test reoring n hek the reoring performne. Progrmmes tht re prohiite from opying ue to opyright protetion nnot e reore. Toshi shll not e lile for ompenstion or inientl mges of ny kin whtsoever resulting from ontent tht ws not properly reore on the reoring evie or tht ws moifie or lost. When Using USB Hr Drive (HDD) Toshi shll not e lile for mges of ny kin whtsoever (rekown of the reoring evie, moifition or loss of the reore ontent, et.) resulting from mlfuntion, operting filure or inorret opertion ue to omining with nother onnete evie. If you onnet USB HDD tht hs een use with PC or nother TV, only progrmmes whih re reore using this TV n e plyk. Swith the TV to stny efore you isonnet the USB HDD. Not oing so my result in loss of the reore t or mlfuntion of the USB HDD. Plese note tht reoring on the USB HDD is no longer plyle fter the TV s min-or is exhnge uring servie. 6

7 INSTALLING YOUR TV The remote ontrol Simple t--glne referene of your remote ontrol Aesses the CLOUD HOME 20 - Aesses to premium ontent ville online 21 To ess the on-sreen Menu 22 To isply the igitl on-sreen Progrmme Guie 23 To pge up, own, left or right 24 When using menus, the rrows move the ursor on the sreen up, own, left or right. Press OK to onfirm your seletion 25 To return to previous Menu 26 To exit menus n pplitions 27 When in TV moe: D Anlogue time isply When in Text moe: A To revel onele text B To hol wnte pge C To enlrge text isply size D To erse Text pges temporrily when you re viewing in teletext moe. During Plyk: To PLAY v To STOP W To PAUSE Z To SKIP-BACK CC To REWIND To FAST FORWARD z To SKIP FORWARD 28 To ess the nlogue or igitl Chnnel List 29 To ll up text servies 30 To reor DTV progrmmes 31 Colour uttons: Text n intertive servie ontrol uttons 1 For On/Stny moe 2 To selet externl input soures 3 To selet TV Moe 4 Seletle Piture 5 Wiesreen viewing 6 Piture still 7 Digitl Sutitles or Anlogue TEXT Sutitle pges if ville 8 s Stereo/ilingul trnsmissions 9 To swith etween 2D / 3D moes 10 Numer uttons 11 Swith the Auio Desription On/Off 12 To return to previous hnnel 13 To isply on-sreen informtion To ess the inex pge in Text moe 14 To lter the TV volume 15 To hnge progrmme positions To hnge TEXT pges 16 To mute the TV soun 17 To ess Quik Menu 18 - Aesses the Serh Portl 7 Inserting tteries n effetive rnge Remove the k over to revel the ttery omprtment n mke sure the tteries re inserte the proper wy. Suitle ttery types for this remote ontrol re AAA, IEC R V. Do not omine use, ol ttery with new one or mix ttery types. Remove exhuste tteries immeitely to prevent i from leking into the ttery omprtment. Dispose of them in orne with instrutions on pge 99 of this mnul. Wrning: Btteries must not e expose to exessive het suh s sunshine, fire or the like. The performne of the remote ontrol will eteriorte eyon istne of five metres or outsie n ngle of 30 egrees from the entre of the television. If the operting rnge eomes reue, the tteries my nee repling.

8 CONNECTING YOUR TV Conneting externl equipment Before onneting ny externl equipment, turn off ll min power swithes. If there is no swith, remove the mins plug from the wll soket. ILLUSTRATION SHOWS 40L. DVB Common Interfe (for Conitionl Aess Moule (CAM)) Hephones HDMI (1~3) Power or LAN port COMPONENT VIDEO/AUDIO INPUT VIDEO/AUDIO INPUT (Y/L/R) (EXT 2) SCART (EXT 1) USB (1~2) HDMI 4 INPUT DIGITAL AUDIO OUTPUT (OPTICAL) RGB/PC INPUT Stellite ish Aeril Cle 40L/40M 50L/50M/58L/58M Deoer* * A Deoer n e igitl Stellite, free to ir or ny other omptile eoer / reorer. Aeril les: Connet the eril to the soket on the rer of the TV. If you use eoer n/or mei reorer, it is essentil tht the eril le is onnete through the eoer n/or through the mei reorer to the TV. Stellite le: Connet the LNB from the stellite ish to the SATELLITE ANTENNA soket on the TV. You n reeive TV, rio, intertive TV, n HD TV with ler reeption. SCART les: Connet the mei reorer IN/OUT soket to the television. Connet the eoer TV soket to the television. Before running Auto Tuning, put your eoer n mei reorer to Stny. The RCA sokets longsie the COMPONENT VIDEO INPUT sokets will ept L n R uio signls. When onneting the VIDEO/AUDIO evies, onnet those les to Y/L/R sokets. The Digitl Auio Output soket enles the onnetion of suitle surroun soun system. NOTE: This output is lwys tive. Aeril LNB IN SATELLITE ANTENNA (L736*/M836* series only) HDMI (High-Definition Multimei Interfe) is for use with eletril equipment with igitl uio n vieo output. It is esigne for est performne with 1080i n 1080p high-efinition vieo signls ut will lso ept n isply VGA, 480i, 480p, 576i, 576p n 720p signls. PC formt signls will lso e isplye. NOTE: Although this television is le to onnet to HDMI equipment, it is possile tht some equipment my not operte orretly. LAN port is use to onnet the TV to your home network. A wie vriety of externl equipment n e onnete to the k of the television; therefore, the relevnt owner s mnuls for ll itionl equipment must e referre to for ext instrutions. If the television utomtilly swithes over to monitor externl equipment, return to norml television y pressing the esire progrmme position utton. To rell externl equipment, press o to selet etween TV, EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC. When the externl input moe is selete while viewing DTV moe, the SCART soket oes not output vieo/ uio signls. 8

9 CONNECTING YOUR TV Conneting n HDMI evie The HDMI input on your television reeives igitl uio n unompresse igitl vieo from n HDMI soure evie. This input is esigne to ept HDCP (High-Bnwith Digitl Content Protetion) progrmme mteril in igitl form from EIA/CEA-861-D omplint onsumer eletroni evies (suh s set-top ox or DVD plyer with HDMI output). For eptle vieo signl formts, see pge 93. NOTE: Supporte Auio formt: Liner PCM, Doly Digitl (AC-3), smpling rte 32/44.1/48 khz. HDMI s ARC (Auio Return Chnnel) feture This feture enles the uio signl of the TV to e sent to the AV mplifier vi the HDMI le. It will not e neessry to onnet le from the uio output of the TV to the uio input of the AV mplifier to reproue the uio reeive from the tuner of the TV through the AV mplifier. the sie of your television To onnet n HDMI evie Connet n HDMI le (type A onnetor) to the HDMI terminl. For proper opertion, it is reommene tht you use n HDMI le with the HDMI Logo ( ). If your HDMI onnetion is ple of 1080p n/or your television is ple of refresh rtes greter thn 50 Hz, you will nee Ctegory 2 le. Conventionl HDMI/ DVI le my not work properly with this moel. HDMI le trnsfers oth vieo n uio. Seprte nlogue uio les re not require (see illustrtion). the k n sie of your television HDMI le AV mplifier tht supports ARC HDMI evie HDMI le To view the HDMI evie vieo, press o to selet HDMI 1, HDMI 2, HDMI 3 or HDMI 4 moe. 9

10 CONNECTING YOUR TV Conneting n HDMI CEC Control omptile evie You n ontrol the si funtions of onnete uio/vieo evies using the television s remote ontrol if you onnet n HDMI CEC omptile AV mplifier or plyk evie. For n explntion of setup n opertions, see pges the sie of your television AV mplifier Plyk evie Plyk evie For the setup shown ove, you will nee three HDMI les. NOTE: If severl evies re onnete, the HDMI CEC Control feture my not operte properly. For proper opertion, it is reommene tht you use HDMI les with the HDMI Logo ( ). This funtion is ville when one PC n one AV mplifier re onnete seprtely. However, it my not operte properly if the PC is onnete vi the AV mplifier. Before ontrolling the evie(s): After ompleting the ove onnetions, set the HDMI CEC Control Setup menu s you esire (see pge 85). The onnete evies must lso e set. For etils, see the opertion mnul for eh evie. The HDMI CEC Control feture uses CEC tehnology s regulte y the HDMI stnr. This feture is limite to moels inorporting Toshi s HDMI CEC Control. However, Toshi is not lile for those opertions. Refer to iniviul instrution mnuls for omptiility informtion. 10

11 CONNECTING YOUR TV Conneting omputer With either n HDMI or n RGB/PC onnetion, you n wth your omputer s isply on the television. To onnet PC to the HDMI terminl When onneting PC to the HDMI terminl on the television, use n HDMI le (type A onnetor). the sie of your television To onnet PC to the RGB/PC terminl When onneting PC to the RGB/PC terminl on the television, use n nlogue RGB (15-pin) omputer le. Computer the k of your television Mini D-su 15 pin onnetor Computer RGB PC le (not supplie) HDMI le If onneting PC with DVI terminl, use n HDMI-to-DVI ptor le. Computer the sie of your television HDMI-to-DVI ptor le For eptle PC n vieo signl formts, see pge 93. NOTE: The eges of the imges my e hien. If onneting ertin PC moel with unique PC signl, the PC signl my not e etete orretly. Conversion ptor if require (not supplie) To use PC, set the monitor output resolution on the PC efore onneting it to the television. For eptle PC signl formts, see pge 92. To isply the optimum piture, use the PC setting feture (see pge 82). NOTE: Some PC moels nnot e onnete to this television. An ptor is not neee for omputers with omptile mini D-su15-pin terminl. Depening on the DVD s title n the speifitions of the PC on whih you re plying the DVD-Vieo, some senes my e skippe or you my not e le to puse uring multi-ngle senes. A n my pper t the eges of the sreen or prts of the piture my e osure. This is ue to sling of the piture y the set, it is not mlfuntion. When PC input moe is selete, some of the television s fetures will e unville e.g. Colour System in the Options menu. Some PC moels my output unique signls tht the television my e unle to etet (see pge 92). If onneting ertin PC moel with unique PC signl, the PC signl my not e etete orretly. 11

12 CONNECTING YOUR TV Conneting home network The LAN port llows your Toshi TV to onnet to your home network. You n use this revolutionry home entertinment networking system to ess photo, vieo n uio files tht re store on mei server n ply/ isply them on your TV. NOTE: If you onnet to shre network outsie your home, it is visle to use router. Alwys use network mei prouts in privte network environments. Connet this TV to the sme router s other network mei prouts (server). If you use hu or swith to onnet the TV to your home network, you my not e le to use the utomti setup n will hve to mnully set up the network ress. See pge 47. If you use router with uilt-in DHCP funtionlity, use the utomti setup. Mnul setup my not work. If you onnet the TV n PC iretly, use rossover LAN le. Plese onsult your PC mnufturer out etils of PC settings. Wireless pplines my interfere with Intel Wireless Disply. To onnet the TV to home network - Wire Moem (if ville) [1] [2] the k of your television Router with Hu To onnet the TV to home network with n internet onnetion - Wireless Plese refer to Wireless Setup setion on pge 44. Moem Computer Aess point (AP) Wireless LAN router NOTE: If this evie is going to e operte in the frequeny rnge of 5.15 GHz to 5.35 GHz, it is restrite to inoor use. If this evie is going to e operte for /g/n funtion in the frequeny rnge of GHz to GHz in Frne, it is restrite to inoor use. A generl uthoriztion is require for using this evie outoors or in puli ples in Itly. This evie is NOT ALLOWED to e use in the geogrphil re within rius of 20 km from the entre of Ny-Alesun in Norwy. Mke the wireless LAN pproprite seurity setting t the time of wireless LAN use to prevent the illegl use, spoofing n intereption of ommunitions. Don't onnet wireless LAN to n outsie network iretly. Apply the wireless LAN ess point with router funtion or ron router. Mke the router pproprite seurity setting to prevent the illegl use. Refer to the mnul of router for seurity setting. Cle or Phone jk Server PC [2] [2][3] To onnet the TV to the PC with Intel Wireless Disply PC with Intel Wireless Disply Intel WiDi [1] Coxil or telephone le (epening on your moem type) [2] Stnr LAN le [3] Do not onnet phone jk iretly to the TV s LAN port. Wrning: This TV omplies with the EMC iretive only when you use shiele Ct5 ethernet le. 12

13 CONNECTING YOUR TV Controls n input onnetions A wie vriety of externl equipment n e onnete to the input sokets on the sie of the television. While ll the neessry justments n ontrols for the television re me using the remote ontrol, the uttons on the television my e use for some funtions. ILLUSTRATION SHOWS 40L. DVB COMMON INTERFACE The Common Interfe is for Conitionl Aess Moule (CAM). Contt servie provier. The softwre upting of CI Plus CAM my e utomtilly exeute. At this time, your Reoring/Reminer progrmming will e nelle. USB ports Mei Plyer/USB HDD onnetion port Control pnel Light sensor Remote sensor Power LED On = Green Stny = Re Swithing on If the RED LED is not lit, hek tht the mins plug is onnete to the power supply n press 1 on the remote ontrol; it my tke few moments. The GREEN LED will e lit. To put the television into Stny, press 1 on the remote ontrol. To view the television, press 1 gin. The piture my tke few seons to pper. For energy sving: We reommen tht you use the television with the ftory settings. The ftory settings re for energy sving. Unplugging the mins plug will ut energy use to zero for ll televisions. This is reommene when the television is not eing use for long time, e.g. when on holiy. Reuing the rightness of the sreen will reue energy use. Energy effiieny uts energy onsumption n n sve money. NOTE: Putting the television into Stny will reue energy onsumption, ut will still rw some power. Using the TV ontrols n onnetions To turn on or off the TV, press!. To lter the volume, press + or. + n uttons operte s volume up/own s efult. Press p / o repetely to swith the funtion of 2 +/ utton s elow. Chnnel Input Volume The Mei Plyer feture provies ess to photo, movie n musi files store on USB storge evie tht is onnete vi the USB 1 or USB 2 port or on network evie. Plese lwys refer to the owner s mnul of the equipment to e onnete for full etils. NOTE: The USB soket hs limite funtionlity n Toshi n tke no responsiility for mge to other onnete equipment. Intertive vieo gmes tht involve shooting gun t n on-sreen trget my not work with this TV. 13

14 CONNECTING YOUR TV Using the menu system Press on the remote ontrol to isply the menu. The menu ppers s list of eight topis. As eh ion is selete y pressing B / on the remote ontrol, its respetive options will pper on the right. NOTE: The sme menu is isplye in DTV (Digitl TV) n ATV (Anlogue TV) moes; however, where some items re not ville in moe, they will pper greye out. Press B / Options Press B / n OK or Reoring Setup Mei Plyer Setup MHL Setup HDMI CEC Control Setup Hyri TV Stnr Teletext Pnel Lok Press B / n OK or AV Connetion Piture Moe Power Mngement Piture Reset Bklight Contrst Press B / Blue Sreen HDMI Informtion Disply Press B / n OK or Brightness Menu Lnguge Colour Tint Instlltion Country Lotion Shrpness Chnnel Tuning Avne Piture Settings DTV Settings Expert Piture Settings Quik Setup Press B / Disply Settings Press B / n OK or Blne Press B / Reset TV Press B / n OK or Network Setup Soun Bss Trele Auyssey Premium Television Network Press B / Network Devie Setup Smrt Apps Setup Press B / n OK or Dynmi Rnge Control 3D Auto Strt Dul Auio Level Offset 3D 2D to 3D Depth 3D PIN TV Spekers 3D Sfety Settings Hephone Level Auio Desription Press B / 3D Importnt Info Press B / n OK or Digitl Auio Output On Timer Timers Press B / Sleep Timer Press B / n OK or Softwre Lienes Get Help Softwre Upgre System Informtion Store Demo 14

15 SETTING UP YOUR TV Strtup Applition Before swithing on the TV mke sure tht your eril is onnete n ny eoer / mei reorer, if pplile is onnete n in Stny. Press BC to highlight Next n press OK. The Lotion sreen will pper. Quik Setup Country Lotion Lotion 1/2 Quik Setup Network Smrt TV To set up the TV for use within showroom, plese selet [Store] from the menu elow. [Home] is reommene for norml use. Press the 1 utton, Toshi logo will pper. After tht, The Menu Lnguge sreen will pper. This sreen will pper the first time tht the television is swithe on n eh time Reset TV is exeute. Press BC to selet the menu lnguge n press OK. The Country/Lnguge sreen will pper. Menu Lnguge Plese press [OK] to proee. Frnçis Deutsh Espñol e f g Chnnel Tuning * Power requirement for Store moe will e higher ue to utomti store emos. Home Store Previous Next Press B / to selet Home or Store n press OK. For norml home use, selet Home. Press BC to highlight Next n press OK. The Network Type sreen will pper. Press B to highlight Network Type n then press n B / to selet Wireless. Press OK. Itlino Português Neerlns Svensk Quik Setup Network Type 1/5 Country Densk Norsk Suomi Polski Lotion Türkçe Mgyr Slovensky Český Network Network setup llows you to ess ontent on your home network n the Internet. Pусский Română Български Srpski Smrt TV Enjoy online vieo, musi, gmes, news n more provie y Smrt TV portl* n keep your TV up to te with new softwre. Ελληνικα Hrvtski Укpϊньк Slovenščin Chnnel Tuning * Avilility is epennt on ountry seletion Press B / to highlight Country n press n B / to selet your ountry. Plese selet from Wire or Wireless Network Type Wire Previous Next Skip Wire Wireless Quik Setup Country Lotion Network Smrt TV Chnnel Tuning Country/Lnguge 1/3 Welome Thnk you for hoosing Toshi TV Country Primry Sutitle Lnguge Seonry Sutitle Lnguge Primry Auio Lnguge Seonry Auio Lnguge Previous Next Germny Germn Turkish Germn Germn Greek Greenlni Hungrin Ielni Irish Itlin h i When you selet Wire (LAN le onnetion), skip to step 14. Press BC to highlight Next n press OK. The Wireless Setup sreen will pper. Press B to highlight Wireless Setup n then press n B / to selet the Wireless Setup type. Press OK. Quik Setup Country Wireless Setup 2/5 Plese selet wireless network setup option. Assiste Setup is reommene. Kurish Lotion NOTE: The following isply menus will iffer slightly oring to the ountry you selete. If there is not ountry tht you wnt to selet in the list, selet Others. Network Smrt TV Chnnel Tuning Wireless Setup Esy Setup Esy Setup Assiste Setup Mnul Setup Previous Next 15

16 SETTING UP YOUR TV There re 3 methos for Wireless Setup: Esy Setup (WPS) - If the AP supports WPS, this metho n e use. WPS is n inustry stnr esigne to mke onnetion of wireless LAN equipment n seurity setup esy. WPS will utomtilly onfigure ll wireless settings. NOTE: WEP enryption my not e le to onfigure y esy setup. Assiste Setup - follow step 11. Input the Seurity Key only. Mnul Setup, skip to step 12. Input the ll settings. NOTE: EXIT is ville uring settings. j In step 9, when you selet Esy Setup; Press BC to highlight Next n press OK. The Esy Setup sreen will pper. Press n B / to selet PBC (Push Button Configurtion) or PIN (Personl Ientifition Numer) n press OK. Press to highlight Strt Sn n press OK. PBC - Following the on-sreen instrutions, push the pproprite utton on your AP. When winow reporting tht the setup is omplete ppers, press OK. PIN - When the PIN oe winow ppers, enter the isplye PIN into your AP, n then press OK to ontinue the PIN Setup. When messge isplys to report tht the setup is omplete, press OK. To nel serhing for the AP: Press BACK while serhing for the AP. A messge will pper, n then press C / to selet Yes n press OK. k In step 9, when you selet Assiste Setup; Press BC to highlight Next n press OK. The Assiste Setup sreen will pper. Press B / to selet the esire AP n press OK. NOTE: Chek the MAC ress on the lel of the AP or in the mnul, n selet your AP. Press B / to selet Seurity Key n press OK. The Softwre Keyor winow will pper (pge 49). Input the Seurity Key y using the Softwre Keyor. To sve your setting, press the GREEN utton. NOTE: The Seurity Key must here to these onitions: 16 l - TKIP/AES: 8-63 ASCII or 64 Hex hrters - WEP: 5 or 13 ASCII or 10 or 26 Hex hrters There is only one key ID to set for WEP enryption. Press B / to highlight Done n press OK. NOTE: If Network Nme is not isplye, see Mnul Setup elow to set Network Nme efore Done is selete. If BACK is presse efore Done is selete, settings re not sve. When the messge Wireless onfigurtion is omplete. ppers on sreen, press OK. The sreen will skip to step 13. In step 9, when you selet Mnul Setup; Press BC to highlight Next n press OK. The Mnul Setup sreen will pper. Press B / to selet Network Nme n press OK. The Softwre Keyor winow will pper (pge 49). Input the Network Nme y using the Softwre Keyor. To sve your setting, press the GREEN utton. Press B / to selet Authentition n then press n B / to selet Open System, Shre Key, WPA-PSK or WPA2-PSK. Press OK. Press B / to selet Enryption, n then press n B / to selet None, WEP, TKIP or AES. Press OK. NOTE: Certin enryption types re only omptile with speifi uthentition types. - When Authentition is Open System, only WEP or None is omptile. - When Authentition is Shre Key, only WEP or None is omptile. - When Authentition is WPA-PSK or WPA2- PSK, only TKIP or AES is omptile. When inomptile Authentition/Enryption pirings re etete, wrning messge will e isplye, n no onnetion ttempt will e me until the inomptiility is resolve. There is only one key ID to set for WEP enryption. Press B / to selet Seurity Key n press OK. Input the Seurity Key y using the Softwre Keyor (pge 49). To sve your setting, press the GREEN utton. This item is greye out when Enryption is None.

17 SETTING UP YOUR TV When Enryption is WEP, Key ID setting is ville. Press B / to selet Key ID n press n B / to selet 1 (efult), 2, 3 or 4. o Press OK, n TV Power On Control sreen will pper. Selet Disle or Enle n highlight Next. Press B / to highlight Done n press OK. When the messge Wireless onfigurtion is omplete. ppers on sreen, press OK. Quik Setup Country TV Power On Control 1/2 m NOTE: Settings re not sve if BACK is presse efore Done is selete. The Avne Network Setup sreen will pper. Lotion Network Smrt TV Chnnel Tuning We reommen you Enle TV Power On Control for quik ess to Toshi servies. One enle you will e le to view Internet n Menu systems fster. This moe will result in your TV using higher power onsumption thn when Disle. TV Power On Control Disle Disle Enle When the DHCP funtion of the router onnete with this TV is On, you n set Auto Setup to On or Off. (This shoul usully e set to On.) When the DHCP funtion of the router is Off, set Auto Setup to Off, n set the IP Aress DNS ress(es) mnully. p Previous Next Press OK, n Compnion Devie sreen will pper. Selet On or Off from Enle Control n Mei Renerer n highlight Next. Quik Setup Country Lotion Network Smrt TV Chnnel Tuning Avne Network Setup 3/5 Auto Setup On IP Aress xxx. xxx. xx. x Sunet Msk xxx. xxx. xx. x Defult Gtewy xxx. xxx. xx. x Auto Setup On Primry DNS Aress xxx. xxx. xx. x Seonry DNS Aress xxx. xxx. xx. x q Press OK. If the Ant/Cle/Stellite sreen ppers, press B / to selet Antenn, Cle or Stellite, n then press OK to hek ( ). Antenn Cle Stellite Previous Next Previous Next If DVB-C is not supporte in your re, Cle will not e isplye. n You n view the fixe MAC ress for the TV, if one is instlle. Press B / to highlight Next. Press OK, n Network Connetion Test will strt. A messge will pper to inite if the onnetion ws suessful or if oul not e omplete. Network Connetion Test 5/5 Network onnetion ws omplete suessfully. OK r When you selet Antenn or Cle, follow step 18 to 21. When you selet Stellite, skip to step 22. When you selet Antenn (or Cle) n Stellite, the Stellite Settings strtup sreen will pper utomtilly fter ompleting the Antenn (or Cle) sn n pressing OK. Press BC to highlight Next n press OK. The Auto Tuning strt up sreen will pper with the option to selet etween DTV n ATV, DTV or ATV if ville. Press n B / to selet the pproprite moe n press OK. NOTE: The result of Network Connetion Test oes not lwys gurntee the onnetion. To nel the Network Connetion Test: Press EXIT while testing. When the network n e esse, Softwre Upgre strts utomtilly. When Softwre Upgre is omplete, proee to the next step. 17

18 SETTING UP YOUR TV s Press to highlight Strt Sn, n press OK. The television will strt to serh for ville DTV n/or ATV hnnels. The progress r will inite the sn sttus. You must llow the television to omplete the serh. Auto Tuning - Antenn Progress DTV Tune 4 % ATV Tune Witing... Chnnel: 23 Foun 0 0 When the serh is omplete, the television will utomtilly selet hnnel one. The Auto Tuning sreen will isply the totl numer of servies foun. NOTE: None is eing use when the stellite ish will ontrol only one universl Low Noise Blok (LNB) with single stellite (e.g. Astr 19.2 ). As rule, most househols use just one stellite. ToneBurst sens 22 khz signl. ToneBurst is only neessry for simple LNBs (not universl LNBs). The 22 khz signl is neee for swithing LNBs with multifee signls s well s for hnging etween low- n high-n. DiSEqC 2wy utomtilly swithes etween two LNBs, whih reeive ifferent stellites t the sme time (e.g. Astr 19.2 n Hotir 13 ). DiSEqC 4wy utomtilly swithes etween up to four LNBs / stellites. Single le is seletion n ontrol of plurl Stellite ntenns through the omine single ntenn le. T u Press C / to view the DTV (igitl hnnel) or ATV (nlogue hnnel) lists. Press B / to move through the list to selet hnnel, n then press OK to view. In ATV moe, some res my reeive uplite sttions. There my not e ler piture or the signl my e wek, so the sttion orer n e hnge using ATV Mnul Tuning. REMEMBER: Press TV t ny time to selet etween ATV n DTV moes. NOTE: The time will e set utomtilly y trnsmission ut n e vne or erese y using Lol Time Setting in the DTV Settings sreen. The setting LNB Power enles you to swith on or off the LNB's power supply y mens of the TV. When your stellite ish onsists of only one LNB, LNB Power shoul generlly e tivte (On). When using more thn two LNBs, it is reommenle to use externl power supply for these. Stellite Settings Swith Type None LNB Power On No. Stellite Dish LNB 1 Astr 19.2E On Off v Selet Next n press OK. The Stellite Settings sreen will pper. From this winow, you n the stellites tht you wish to tune n onfigure etile settings for eh one iniviully. Selet Swith Type n hoose the orret swith onfigurtion for your stellite ish from the settings None, ToneBurst, DiSEqC 2wy, DiSEqC 4wy or Single le. Stellite Settings Swith Type None LNB Power On No. Stellite Dish LNB 1 Astr 19.2E None ToneBurst DiSEqC 2wy DiSEqC 4wy Single Cle Done It is possile to selet up to four stellites. Plese note tht the numer of ville LNBs n the justment of your stellite ish etermines the numer of stellites foun. For exmple, it is not possile to reeive more thn one stellite if your ish is irete to single stellite. For further informtion on stellite signl tehnology, plese ontt your lol eler. Done 18

19 SETTING UP YOUR TV Stellite Settings Swith Type LNB Power None On No. Stellite Dish LNB 1 Astr 19.2E Trnsponer : 1/120 (10729) MHz Dish Type : Fixe Lower LOF : 9750 Upper LOF : w If your stellite ish is movele, the following Positioning sreen will pper. Positioning Trnsponer 1/120 (10729 MHz V (R)) Go to 0 Go to Store Position Step Size 1 Positioning W E Stellite : Astr 19.2E Signl Level 30% Done Store Position One you hve selete stellite, you n hnge further settings uner Dish n LNB. Press OK n C / to selet Dish or LNB n press GREEN utton. Press B / to highlight Positioning, n then press C / to fin the ish position with the strongest signl level. Uner Dish you hoose the ish type tht will e use (fixe or movele ish). The mjority of househols hve fixe stellite ish. Press B / to highlight Store Position n press OK to store the ish position. Repet steps 22 n 23 for the next stellite s neessry. LNB llows you to etermine the lower n higher Lol Osilltor Frequeny (LOF). Usully, the ftory settings o not nee to e hnge. You n fin the prmeters of the lower n higher LOF on the speifition sheet of your LNB. Ajust the ish position mnully for the mximum Signl Level strength. The signl level strength is isplye from 0 % to 100 %. A high signl level n e hieve y justing the stellite ish the est wy possile. Stellite Settings Signl Level 30% Swith Type None LNB Power On No. Stellite Dish LNB 1 Astr 19.2E Press B / to highlight Done n press OK. If you selet Single Cle in step 22, the Single Cle Settings sreen will pper. You n set the pproprite vlue for eh item n highlight Done. Trnsponer : 1/120 (10729) MHz Dish Type : Fixe Lower LOF : 9750 Upper LOF : Done Single Cle Settings User Slot Numer 0 User Slot Frequeny 1284 Psswor PIN None Press B / to highlight Done n press OK. Verify Slot Frequeny Done 19

20 SETTING UP YOUR TV x If the reeption testing ompletes suessfully, the Auto Tuning strtup sreen will isply. Auto Tuning - Stellite Sn Type Serh Option Quik Sn Free to Air f When Ant/Cle/Stellite is set to Cle, the following setting options will e provie in the Auto Tuning sreen. Press B / to selet n item n press n B / to selet your esire option. Strt Sn Auto Tuning - Cle y z You n selet Serh Option from Free to Air or All. When hoosing the serh option All, ll hnnels (inluing enrypte ones) of the stellite will e serhe for. If you wish to only serh for unenrypte (free) hnnels, plese selet Free to Air. In this se, the hnnel sn will e omplete fster. Press to highlight Strt Sn, n press OK. The television will strt to serh for ville DVB-S hnnels. The progress r will inite the sn sttus. When the serh is omplete, the Auto Tuning results sreen will isply the totl numer of servies foun. Use B / to move through the list to selet hnnel, n then press OK to view. PLEASE NOTE The Quik Setup menu n lso e esse t ny time from the Instlltion menu. Ant/Cle/Stellite (if ville) From this menu, you n set the RF input onfigurtion. Press n B / to highlight Instlltion ion. Tuning Moe DTV Opertor Seletion Sn Type Strt Frequeny En Frequeny Moultion Symol Rte Network ID Strt Sn DTV n ATV Others Quik Sn Auto Auto Auto Auto Auto With the exeption of DTV Sn Type n DTV Moultion items, ll of the following items will hve 2 operting moes. The first is Auto where the vlues for eh item re preset y the system. The seon is n Input moe where you will e le to enter single vlue in ple of the pre-set vlue. If no hnnel is urrently tune n the Input stte is hosen, system efult vlue will e shown. However, if hnnel is urrently tune when the item is esse, the vlue of the urrent hnnel will e isplye. Opertor Seletion: You n hoose the Cle opertor epening on the Country you set. DTV Sn Type: This item etermines whether Quik Sn or Full Sn will e exeute. The Quik Sn is simplifie version of the Full Sn tht is esigne to omplete in less time. DTV Strt Frequeny: This sets the frequeny from whih the sn will egin. e Press n B / to selet Chnnel Tuning n press OK. Press B / to selet Ant/Cle/Stellite n press OK. Press B / to selet Antenn, Cle or Stellite. Press B / to highlight Next n press OK. NOTE: When you ttempt to hnge the Ant/ Cle/Stellite setting, wrning messge will pper followe y PIN entry (if PIN hs een set) n prompt for Auto Tuning. DTV En Frequeny: This sets the frequeny t whih the sn will en. DTV Moultion: You n hoose from five QAM moultion settings. DTV Symol Rte: This is the u rte (KS/s) of the sn. DTV Network ID: This is the Network ID to e utilize for the sn. This item is greye out when DTV Sn Type is set to Full Sn. 20

21 SETTING UP YOUR TV From the System Setup menu, you n the stellites tht you wish to tune n onfigure etile settings for eh one iniviully. To stellite: Press n B / to highlight Instlltion ion. Stellite Settings Press n B / to selet Chnnel Tuning n press OK. Press to selet Stellite Settings n press OK. To eit the stellite settings: In the Stellite Settings menu, press B to highlight Swith Type. Press C / to selet None, ToneBurst, DiSEqC 2wy, DiSEqC 4wy or Single Cle s your stellite swith type. Press to highlight LNB Power n press C / to selet On or Off. To trnsponer: In the Stellite Settings menu, press B / to highlight the line you wnt to eit n press OK. e Press to highlight new line to n nother stellite n press OK. Press until the require stellite is isplye n press OK. To elete stellite: Stellite Settings Swith Type LNB Power None On No. Stellite Dish LNB 1 Astr 19.2E Trnsponer : 1/120 (10729) MHz Dish Type : Fixe Lower LOF : 9750 Upper LOF : Done In the Stellite Settings menu, press B / to selet the stellite you wnt to elete. Press the RED utton. A onfirmtion winow will pper. Press C / to selet Yes n press OK. NOTE: It is not possile to elete position No.1. e 1 Astr 19.2E 1 1 Press the GREEN utton. The Trnsponer Settings sreen will pper. Trnsponer Settings Frequeny Polristion Symol Rte S/S H S H S V S V S H S V S H S V S Press B to highlight new line. Trnsponer Settings Frequeny Polristion Symol Rte S/S H S H S V S H S V S H S V S 83 Press OK H 0 S Eit eh prmeter s require n press OK H 0 S2 21

22 SETTING UP YOUR TV To elete trnsponer: In the Trnsponer Settings menu, press B / to highlight the line you wnt to elete. Press B / to selet Lower LOF or Upper LOF n use the numer uttons (0-9) to input the pproprite frequenies. Press the RED utton. Auto Tuning To eit the Trnsponer Settings: e In the Trnsponer Settings menu, press B / to highlight the line you wnt to eit n press OK. Press C / to selet Frequeny, Polristion, Symol Rte or S/S2, n set the item using the numer uttons n B / if neessry. Press OK to sve your settings. Repet steps 1 through 3 for other lines. Press the BLUE utton to finish eiting n return to Stellite Settings. Press the GREEN utton to nel ny eits tht were me. Press the YELLOW utton to reset ll trnsponer settings to their initil efult settings. NOTE: As new servies re rost, it will e neessry to re-tune the television in orer to view them. Auto Tuning will ompletely re-tune the television n n e use to upte the hnnel list. It is reommene tht Auto Tuning is run perioilly to ensure tht ll new servies re e. All urrent hnnels n settings, i.e. loke hnnels, will e lost. Press n B / to highlight Instlltion ion. Press n B / to selet Chnnel Tuning n press OK. Press B / to selet Auto Tuning n press OK. < Chnnel Tuning Ant/Cle/Stellite Stellite Settings Auto Tuning ATV Mnul Tuning DTV Mnul Tuning To selet the Dish Type: In the Stellite Settings menu, press B / to selet the require stellite line n press OK. Press C / to highlight Dish n press the GREEN utton. A messge will pper, n then press C / to selet Yes n press OK. Press n B / to selet DTV, DTV n ATV, or ATV, if ville, then highlight Strt Sn n press OK to ontinue with the Auto Tuning. Auto Tuning - Antenn Dish Settings Dish : 1 Dish Type Fixe Tuning Moe Strt Sn DTV DTV DTV n ATV ATV Press n B / to selet Dish Type. You n selet Movle or Fixe s the Dish Type. To selet the LNB Settings: In the Stellite Settings menu, press B / to selet the require stellite line n press OK. Press C / to highlight LNB n press the GREEN utton. LNB Settings LNB : 1 Lower LOF 9750 Upper LOF e NOTE: If you hve selete Others for the Country fiel in the Instlltion menu, n selete tuning moe other thn DTV, hoose the optimum ATV rosting system (B/G, I, D/ K or L). The television will strt to serh for ll ville DTV n/or ATV servies. You must llow the television to omplete the serh. When the serh is omplete, the Auto Tuning sreen will isply the servies foun. Press B / to move through the list to selet hnnel n press OK to view. 22

23 SETTING UP YOUR TV ATV Mnul Tuning In the Chnnel Tuning menu, press to selet ATV Mnul Tuning n press OK. Tuning < Chnnel Tuning The television n e tune-in mnully using ATV Mnul Tuning. For exmple, you might use the feture if the television nnot e onnete to mei reorer/ eoer with SCART le or when you wnt to tune-in sttion on nother System. Ant/Cle/Stellite Stellite Settings Auto Tuning ATV Mnul Tuning DTV Mnul Tuning Use C / to move ross the sreen n selet ny of the ATV Mnul Tuning options. Then use B / to just the settings. Press B / to selet the esire position. We suggest Pos. 0 for mei reorer. ATV Mnul Tuning ATV Mnul Tuning System Pos. Chnnel Sttion 1 I A C 2 0 V C R Position The numer to e presse on the remote ontrol to tune the hnnel. 2 System Speifi to ertin res. 3 Colour System Ftory set to Auto, shoul only e hnge if prolems re experiene, i.e. NTSC input from externl soure. 4 Skip Set Skip to On (8) or Off (() for the selete hnnel. See pge Signl Clss The hnnel lssifition. 6 Chnnel The hnnel numer on whih sttion is eing rost. 7 Serh Serh up n own for signl. 8 Mnul Fine Tuning Only use if interferene/wek signl is experiene. See pge Sttion Sttion ientifition. Use the B n C uttons to enter up to seven hrters. e f 0 C2 1 S10 2 C7 3 S40 4 C22 5 C25 6 C28 7 C30 Different Chnnel numers my e isplye. Press OK to selet. If the hnnel hosen for the mei reorer is set to skip, Skip shoul e remove efore storing. Press to selet System n press B / to hnge if require. ATV Mnul Tuning System 1 I A C 2 0 Then press to selet Serh. Press B / to egin the serh. The serh symol will flsh. ATV Mnul Tuning Serh To llote position on the television for eoer n mei reorer: turn the eoer on, insert pre-reore film in the mei reorer, press PLAY n mnully tune. 1 I A C

24 SETTING UP YOUR TV g h Eh signl will show on the television. If it is not your mei reorer, press B / gin to restrt the serh. When your mei reorer signl is foun, press to move long to Sttion. Use BC to put in the require hrters, e.g. VCR. ATV Mnul Tuning Sttion To prevent ertin hnnels from eing viewe, positions n e skippe. Skip Selet ATV Mnul Tuning from the Chnnel Tuning menu. Press B / to highlight the position to e skippe n press OK. 1 I A C 2 0 V C R ATV Mnul Tuning i j k Press OK to sve. Repet for eh position you wnt to tune. Press EXIT when you hve finishe. Pos. Chnnel Sttion 0 C2 1 S10 2 C7 3 S40 4 C22 5 C25 6 C28 7 C30 PLEASE NOTE This television hs iret hnnel entry if the hnnel numers re known. Selet the ATV Mnul Tuning sreen in Step 3. Enter the Position numer, the System, then C for stnr (terrestril) hnnels or S for le hnnels n the Chnnel numer. Press OK to sve. Press to selet Skip. Press B / to turn Skip on n press OK. 8 on the sreen inites skippe position. ATV Mnul Tuning Skip: On 1 I A C 2 0 e Press BACK n repet from Step 2 or press EXIT. Eh position hs to e iniviully selete. To turn Skip off, repet the proeure for eh position. Skippe positions nnot e selete y PU n Pu or y the ontrols on the television ut n still e esse y the numer uttons on the remote ontrol. 24

25 SETTING UP YOUR TV Chnnels my e move n sve to the position of your hoie. Selet ATV Mnul Tuning from the Chnnel Tuning menu. With the list of hnnels showing, press B / to highlight the position to e move n press. Chnnels Line No. Sorting positions 1/10 Pos. Nme 1 ABC ONE 2 ABC TWO 7 ABC THREE 30 CABC Chnnel 40 ABC NEWS ABCi 822 AA 823 AC Antenn TV DTV Mnul Tuning NOTE: This feture vries epening on the Ant/Cle/ Stellite setting. This feture is ville for servie engineers or n e use for iret hnnel entry if the multiplex hnnel is known. Mnul Tuning Selet DTV Mnul Tuning from the Chnnel Tuning menu n press OK. DTV Mnul Tuning - Antenn WEAK AVERAGE STRONG Signl Strength Qulity GOOD Chnnel 67 Frequeny MHz Bnwith 8 MHz Press B / to move through the list to your preferre position. As you o so, the other hnnels will move to mke room. Press C to sve your move. Strt Sn Enter the multiplex numer using the numer uttons or use C / to just the numer up or own. Repet s neessry n press EXIT. Highlight Strt Sn n press OK. The television will utomtilly serh for tht multiplex. DTV Mnul Tuning - Antenn 0 New Chnnels - Totl 6 New Pos. Nme Type 1 ABC ONE 2 ABC TWO 7 ABC THREE 40 ABC NEWS ABCi When the multiplex is foun, ny hnnels tht re not urrently in the hnnel list will e e n the hnnel informtion t the top of the sreen will e upte. Repet s neessry. Press EXIT to finish. 25

26 SETTING UP YOUR TV Mnul Tuning for DVB-C When Ant/Cle/Stellite is set to Cle, DTV Mnul Tuning items re s follows: Frequeny: Input speifi frequeny to e snne Moultion: Choose from one of five QAM moultion options Symol Rte: Input speifi u rte (KS/s) to e use for the mnul sn Highlight Strt Sn n press OK. DTV Settings The hnnel orer my e hnge to suit your personl preferene. Chnnels (Antenn/Cle) Selet DTV Settings from the Instlltion menu n press OK. Press to selet Chnnels n press OK. Mnul Tuning for DVB-S When Ant/Cle/Stellite is set to Stellite, DTV Mnul Tuning items re s follows: DTV Mnul Tuning - Stellite WEAK AVERAGE STRONG Signl Strength Signl Qulity POOR Stellite ASTRA 28.2 E Trnsponer 1/83 Frequeny MHz Symol Rte KS/s Polristion H Serh Option Free to Air Strt Sn Press B / to highlight n item (Stellite, Trnsponer, Frequeny, Symol Rte, Polristion or Serh Option) n press C / to selet the require option. Highlight Strt Sn n press OK. < DTV Settings Chnnels Sutitle n Auio Prentl PIN Setup Prentl Control Lol Time Setting Stny Chnnel Upte Common Interfe For your onveniene, you n jump to speifi ples in the list y one of two methos. Chnnels Line No. 1/10 Pos. Nme 1 ABC ONE 2 ABC TWO 7 ABC THREE 30 CABC Chnnel 40 ABC NEWS ABCi 822 AA 823 AC Antenn TV Line Numer Jump Use the numer uttons (0-9) to input the line numer you wnt to selet n press OK. It is lso possile to hnge the Position numer of prtiulr hnnel. Renumer Press the RED utton to renumer the highlighte hnnel. Eit the hnnel numer using the numer uttons n press OK. If the position numer you input lrey exists, onfirmtion winow will pper. Pos. Nme ABC ONE 26

27 SETTING UP YOUR TV Move Press the GREEN utton to tivte the Move feture. Press B / to selet the hnnel you wish to move n press OK to hek. If you wish to move multiple hnnels t one, selet nother hnnel n hek in the sme wy. Repet s neessry. One ll esire hnnels hve een heke, press B / to ple the fous t the position to whih you wish to move the hnnels. The hnnels will e inserte ove the highlighte hnnel. Press the GREEN utton to exeute the move. Chnnels Line No. 1/10 Pos. Nme 1 ABC ONE 2 ABC TWO 7 ABC THREE 30 CABC Chnnel 40 ABC NEWS ABCi 822 AA 823 AC Antenn TV Position No. Sort Press the YELLOW utton. A onfirmtion winow will pper. Press C / to selet Yes n press OK. Your existing hnnel orer will e lost. Do you wish to ontinue? For your onveniene, you n eit n sort your hnnel list. Line Numer Jump Press the numer uttons (0-9) to input the line numer you wnt to selet n press OK. Stellite Jump Press Z / z to jump to the next hnnel on ifferent Stellite. Renumer Sme s Antenn/Cle hnnels. See pge 26. Move Sme s Antenn/Cle hnnels. See pge 27. Position No. Sort Press the YELLOW utton. A onfirmtion winow will pper. Press C / to selet Yes n press OK. If the Stny Chnnel Upte is set to On, when the TV is in Stny, Digitl Tuning is utomtilly exeute. Stny Chnnel Upte Selet DTV Settings from the Instlltion menu n press OK. Press to selet Stny Chnnel Upte n press n B / to selet On. Yes Lotion setting Chnnels (Stellite) Selet DTV Settings from the Instlltion menu n press OK. Selet Chnnels n press OK. The stellite hnnel list will pper. Chnnels Line No. 1/10 Stellite TV Pos. Nme Stellite 1 DDD 19.2 E 2 AB 19.2 E 3 E 19.2 E 801 BBC 22.5 E 802 BB 22.5 E 803 BA 22.5 E 822 AA 25.6 E 823 AC 25.6 E You n selet either Home or Store moe. Home is reommene for norml home use. Selet Store when using the television for isplying in shop, et. Selet Lotion from the Instlltion menu. Press C / to selet Home or Store. Anlogue swith-off This is igitl television whih is integrte to llow the use of oth igitl n nlogue servies. However, uring the lifetime of this set it is very likely tht nlogue servies will e swithe off to llow for more new igitl servies. This swith-off will hppen in numer of phses, whih will e vertise in your re well in vne. It is reommene tht t eh phse the television is retune to ensure tht existing n new igitl servies n e viewe without isruption. 27

28 Generl ontrols Quik Menu Quik Menu helps you ess some options quikly, suh s Piture Moe, Piture Size, More Informtion, Sleep Timer et. Press QUICK to open the Quik Menu n use B / to selet the option. Quik Menu Intel WiDi Piture Moe Stnr Piture Size Wie 3D Settings More Informtion Chnnel Options Sleep Timer HDMI CEC Devie Control Spekers TV Spekers Hephone Level 30 Wireless Informtion Reoring Informtion NOTE: Quik Menu items re ifferent epening on the urrent moe. Quik menu item exmple Moe Quik menu item Desription When viewing TV Intel WiDi See pge 64. progrmme or pitures from the Piture Moe See pge 38. externl input Piture Size See pge 36. Single Winow 3D Settings See pge 30. More Informtion See pge 76. Chnnel Options See pge 78. Sleep Timer See pge 74. HDMI CEC Devie See pge 85. Control Spekers See pge 85. Hephone Level See pge 35. Wireless Informtion See pge 46. Reoring See pge 76. Informtion When using EPG Genre Colour See pge 77. EPG Upte / Cnel See pge 76. EPG Upte Mei Plyer Piture See pge 38. 3D Settings See pge 30. Soun See pge 34. Intervl Time See pge 68. Repet See pge 68. Bkgroun Musi See pge 68. Ply List See pge 69. Sleep Timer See pge 74. Spekers See pge 85. Hephone Level See pge 35. Seleting hnnels To selet hnnel, use the numere uttons on the remote ontrol. Chnnels n lso e selete using PU n Pu. To isply on-sreen informtion suh s hnnel, input moe or stereo/mono signl, press. Press gin to nel. The Time Disply nlogue only The time isply fility llows the urrent (text servie) time to e seen on the television sreen. Press D whilst wthing norml television rost to see the time isply from the roster. It will remin on sreen for out 5 seons. NOTE: This isply my not e ville in some ses. 28

29 Stereo n Bilingul trnsmissions For DTV progrmmes For stereo or ul mono rosts, press s n use C / to selet settings. Moe Disply Pressing Stereo Dul mono Stereo S Left S Right Dul 1 S Dul 2 S Dul Mono Multihnnel For multi-uio trk rosts, press s repetely to hnge the uio lnguge (see Auio lnguges on pge 79). For ATV progrmmes If stereo or ul lnguge rosts re trnsmitte, the wor Stereo or Dul will pper on the sreen eh time hnnels re hnge, isppering fter few seons. If the rost is not in stereo, the wor Mono will pper. Stereo Press s to selet Stereo or Mono. Bilingul Bilingul trnsmissions re rre. If they re trnsmitte, the wor Dul will e isplye. Choose the require progrmme numer, n if the wor Dul ppers, press s to selet Dul 1, Dul 2 or Mono. Using 3D funtions Before using 3D progrmming, see n follow Importnt informtion for 3D viewing setion on pge 100. Viewing 3D progrmming requires the following: Toshi FPT-AG03 (L73*5D/M83*5D : 2ps supplie, L73**RK/L73**RB : 1ps supplie, L73*3D/L73*1D : Not supplie) Comptile 3D plyk evie or 3D soure 3D ple high qulity HDMI le Viewing 3D imges Inoming vieo signls n either e in 2D or 3D formt. A 2D signl n e viewe in either 2D or 3D, n 3D n e viewe in either 2D or 3D. If the TV n etet the ft tht signl is 3D, it n hnge to 3D moe utomtilly see Setting the uto strt moe (on pge 31). Otherwise you n hnge the viewing moe using the 3D utton. Finlly, the formt of the 3D signl n e either Sie y Sie (SBS) or Top n Bottom (TB). You my hve to hoose the orret formt if the TV n not etet it utomtilly see Swithing isply moe or seleting 3D formt. Moreover, you n hnge 2D imges to 3D imges y pressing the 3D utton when viewing in 2D. NOTE: When 3D formt signl is not reeive, isply moe is not swithe to 3D. If pproprite moe n formt re not selete, 3D imge is not orretly isplye. There will e restritions on the Piture Size settings for 3D Moe n 2D Moe. There re iniviul ifferenes in pereption of 3D imges. When viewing 3D imges, wer the 3D Glsses. The 2D to 3D onversion funtion is tivte n ontrolle y you oring to your personl preferenes. The 2D to 3D onversion funtion is ment for enjoyment of 2D home vieo, n other 2D ontent you rete, in 3D oring to your personl preferenes. The 2D to 3D onversion funtion is not intene for use with pre-reore 2D opyrighte ontent owne y thir-prty unless the opyright owner hs given iret or iniret permission, or unless pplile lw permits suh use. 29

30 Swithing isply moe or seleting 3D formt Moe There re four moes for wthing TV. 3D* Displys 3D imges. * This moe oes not support ll ontent epening on its input soure formt. 3D formt selet If right n left imges re sme in Ntive moe, selet SBS. If top n ottom imges re sme in Ntive moe, selet TB. 3D formts re the following. * This formt nnot e selete mnully. The 3D utton's opertion Desription 2D Chnges 3D imges to 2D. 2D to 3D* Chnges 2D imges to 3D. Ntive Displys reeive signl formt s it is. 3D formt Sie y Sie (SBS) Top n Bottom (TB) Frme Pking (FP) * Desription Imges for the left n right eyes re positione sie-y-sie. Imges for the left n right eyes re positione t the top n ottom of the sreen. Imge for the left n right eyes for two frmes re positione t the top n ottom of the sreen. The ehviour of 3D when viewing in Ntive moe is ifferent epening on the input moe. Depening on the input moe, the sreen for seleting 2D or 3D is isplye or the isply moe swithes etween 2D n 3D. To swith to 3D moe: Set 3D Auto Strt in the 3D menu to 3D. Press 3D while viewing 2D moe or Ntive moe. Input Signl Type Aitionl Informtion 3D Formt Signl * Corret 3D imge To selet 3D formt from the Quik menu in 3D moe: With 3D Auto Detet Informtion Without 3D Auto Detet Informtion 2D Formt Signl Trigger of Swithing Disply Moe Formt FP SBS TB SBS TB Soure Signl 3D Press 3D utton Selet 3D Press QUICK to open the Quik Menu. Press B / to selet 3D Settings n press OK. Press B / to selet 3D Formt Selet n press OK. 3D Press C / to selet 3D (SBS) or 3D (TB). Input Signl Type Aitionl Info 3D Formt Signl With 3D Auto Detet Informtion 3D 3D 3D 3D * * * Selet 2D to 3D * 3D 3D 3D 3D 3D 3D D D 3 3 3D D 3 * 3D 3D Trigger of Swithing Quik menu Disply Moe 3D Formt Selet Formt Soure SBS TB Signl FP 3D 3D SBS 3D 3D Without 3D Auto Detet Informtion 2D Formt Signl * Corret 3D imge TB SBS TB 3D 3D 3D 3D 3D 3D * D D 3 3 3D D 3 3D 3D 3D 3D * 3D 3D 30

31 To swith to 2D moe: Set 3D Auto Strt in the 3D menu to 2D. Press 3D while viewing 3D moe. * Corret 2D imge To selet 2D formt from the Quik menu in 2D moe: Trigger of Swithing Disply Moe Press QUICK to open the Quik Menu. Press B / to selet 3D Settings n press OK. Press B / to selet 2D Formt Selet n press OK. Press C / to selet Ntive, 2D (SBS) or 2D (TB). 2D Formt Signl 3D 3 3D * Corret 2D imge NOTE: Tke off the 3D Glsses in 2D moe. Press 3D utton Input Signl Type Aitionl Info Formt Soure Signl 3D With 3D Auto 3D Formt Detet FP Signl Informtion 3D * 3D SBS 3D 3D * 3D TB 3D * 3D Without 3D Auto Detet Informtion 2D Formt Signl Input Signl Type Aitionl Info 3D With 3D Formt Auto Detet Signl Informtion FP SBS TB 3D 3D 3D 3D 3D 3D 3D 3D Trigger of Swithing Quik menu Disply Moe 2D Formt Selet Formt Soure Signl SBS TB Without 3D SBS Auto Detet Informtion TB 3D * 3D 3D 3D SBS TB Ntive 3D * 3D 3D 3D 3D 3D 3D * 3D 3D 3D 3D * 3D 3D 3D 3D 3D 3D 3 * 3D 3D 3 3D 3D 3D To swith to Ntive moe: Press 3D while viewing 3D moe. Press 3D while viewing 2D to 3D moe. NOTE: When 3D formt signl with 3D Auto Detet Informtion is reeive, it is not possile to swith to Ntive. From the Quik Menu in 2D moe. In the Quik Menu, press B / to selet 3D Settings n press OK. Press B / to selet 2D Formt Selet n press OK. Press C / to selet Ntive. NOTE: When Frme Pking is input, 2D Formt Selet will e greye out. To swith to 2D to 3D moe: Press 3D while viewing 2D or Ntive moe. NOTE: Depening on the input moe, the isply moe swithes etween 2D n 3D. Controls wht the TV oes when it etets 3D signl. Press n B / to highlight 3D ion. 3D 2D Off Option Setting the uto strt moe Press n B / to selet 3D Auto Strt. Press C / to selet 3D, 2D, or Off n press OK. < 3D 3D Auto Strt 3D 2D to 3D Depth 3 3D PIN 3D Sfety Settings 3D Importnt Info Desription 3D 2D Off Displys s 3D moe utomtilly when 3D formt signl is reeive. Displys s 2D moe utomtilly when 3D formt signl is reeive. Displys sreen tht llows you to selet 3D or 2D when 3D formt signl is reeive. 31

32 From the Menu: Ajusting 2D to 3D Depth You n just the level of 3D. In the 3D menu, press B / to selet 2D to 3D Depth n press OK. A 3D PIN oe is neessry for using 3D Sfety Settings. To enter new PIN oe: Setting the 3D PIN oe In the 3D menu, press B / to selet 3D PIN n press OK. Press C / to selet 1, 2, 3, 4, or 5 n press OK. The higher the numer, the stronger the 3D effet. From the Quik Menu: Press QUICK to open the Quik Menu. Press B / to selet 3D Settings n press OK. Press B / to selet 2D to 3D Depth n press OK. Press C / to selet 1, 2, 3, 4, or 5 n press OK. The higher the numer, the stronger the 3D effet. NOTE: Depening on the ontent, setting the 3D effet to high level my result in lurring of the imge ontours n kgroun. If you experiene ny norml senstion or feel ftigue or nuse when viewing 3D imges, stop wthing n rest until the symptoms susie. Before viewing gin, just the 3D effet to lower numer n view t level t whih the symptoms o not our. Press the numer uttons to enter 4-igit numer. Confirm the oe. NOTE: PIN oe nnot e set to To hnge or elete your PIN oe: In the 3D menu, press B / to selet 3D PIN n press OK. Press the numer uttons to enter your 4-igit PIN oe. Selet Chnge PIN or Delete PIN n press OK. NOTE: PIN oe nnot e set to If PIN is elete, 3D Sfety Settings is greye out, n the settings re reset to the ftory efult. When this feture is set to On, messge is isplye onsreen when 3D signl is reeive. Setting 3D Strt Messge In the 3D menu, press B / to selet 3D Sfety Settings n press OK. Enter your 4-igit 3D PIN oe. Press B / to selet 3D Strt Messge. Press n B / to selet On or Off. 32

33 When this feture is set to On, you must enter 3D PIN oe for hnging isply moe. Setting 3D Lok In the 3D menu, press B / to selet 3D Sfety Settings n press OK. Enter your 4-igit 3D PIN oe. Press B / to selet 3D Lok. Press C / to selet On. In the 3D menu, press B / to selet 3D Importnt Info n press OK. A messge will pper. The left n right eye shutter timing of the glsses n e swppe. If 3D imges look lurre, swith the left n right sies of the 3D imge. Displying 3D Importnt Info Swithing left n right imges Press QUICK to open the Quik Menu. When the 3D Timer Lok feture is set to On, neither the PIN input winow nor the 3D strt messge will e shown while the 3D Enle timer is tive, even if swith to 3D Moe ours. This helps to voi sking for the 3D Lok PIN n isplying 3D strt messge every time when swithing to 3D. NOTE: This feture nnot e selete until the 3D PIN is set. Setting 3D Timer Lok In the 3D menu, press B / to selet 3D Sfety Settings n press OK. Press B / to selet 3D Settings n press OK. Press B / to selet Left n Right Imge. Press n B / to selet Swppe n press OK. Enter your 4-igit 3D PIN oe. Press B / to selet 3D Timer Lok. Press n B / to selet On. This feture helps to remin you not to wth 3D vieo for extene perios of time. One set perio of time hs psse, ilogue will e shown sking you if you wish to ontinue viewing or not. Setting Enle 3D Timer In the 3D menu, press B / to selet 3D Sfety Settings n press OK. Enter your 4-igit 3D PIN oe. Press B / to selet Enle 3D Timer. Press n B / to selet 30, 60, 90, or 120 minutes. e To nel the timer, selet Off. 33

34 Soun ontrols Volume ontrols n soun mute Volume Press 2+ or 2 to just the volume. Soun Mute Press one to turn the soun off n gin to nel. Auyssey TV Mounting feture n provie n pproprite soun epening on the TV instlltion type, tht TV is instlle on wll or TV tle. TV Mounting (Wll/Tle) In the Soun menu, press B / to selet Auyssey Premium Television n press OK. Press B / to selet TV Mounting. If progrmme or film is eing rost with sountrk in more thn one lnguge, the Dul feture llows seletion etween them. Press n B / to highlight Soun ion. Dul Press n B / to selet Dul n press n B / to hoose etween Dul 1 or Dul 2. < Soun Blne 0 Bss 0 Trele 0 Auyssey Premium Television Dynmi Rnge Control On Dul Dul 1 Auio Level Offset TV Spekers On Hephone Level Auio Desription Digitl Auio Output Blne In the Soun menu, press B / to selet Blne n press C / to emphsize left n right speker lne. Bss, Trele In the Soun menu, press B / to selet Bss or Trele. Press C / to hnge the setting. Press n B / to selet Wll or Tle. Auyssey Dynmi Volume ontrols volume levels to eliminte lou spikes n rise soft ilog for more enjoyle television n movie viewing. In the Soun menu, press B / to selet Auyssey Premium Television n press OK. Press B / to selet Dynmi Volume. Press n B / to selet Dy, Night or Off. Auyssey ABX tehnology uses sophistite river nlysis n low frequeny monitoring to exten the rnge n ss of smll spekers. This enles the system to proue lower frequenies tht woul e possile with tritionl system of the sme size. In the Soun menu, press B / to selet Auyssey Premium Television n press OK. Press B / to selet Auyssey ABX. Press n B / to selet the esire Auyssey ABX level (Low, High or Off). This feture llows ontrol of uio ompression for some igitl TV progrmmes (MPEG-1 n MPEG-2 uio progrmmes re not supporte). Dynmi Volume Auyssey ABX Dynmi Rnge Control In the Soun menu, press B / to selet Dynmi Rnge Control. Press n B / to selet On or Off. 34

35 Sometimes there n e lrge hnges in volume when swithing from DTV 5.1h to DTV 2h, n ATV hnnel, or n externl input. Using the Auio Level Offset feture reues these volume ifferenes. Auio Level Offset Set the volume level usully use when wthing DTV 5.1h progrmme. Tune to hnnel whih is DTV 2h, ATV or n externl input. In the Soun menu, press B / to selet Auio Level Offset n press OK. Press B / to selet n option, n then press C / to just the volume level. < Auio Level Offset DTV 2h 0 ATV 0 Externl Input 0 0 This setting is use to set the soun output when hephones re onnete. Speker Link Hephone Settings Hephone On Soun is output (2 ± is ville.) Off Soun is output (Hephone level menu is ville.) In the Soun menu, press B / to selet Hephone Level n press OK. Press B / to selet Speker Link n press n B / to selet On or Off. < Hephone Level Spekers No soun Soun is output (2 ± is ville.) NOTE: The ville item hnges epening on the urrent input soure. For exmple, while wthing DTV 2h progrmme, only DTV 2h is ville n the other two items re greye out in the menu. This llows you to esily just oring to eh onition. When wthing DTV 5.1h progrmme, this feture is not ville. Speker Link On Hephone Level 30 If you selet Off, then highlight Hephone Level n use C / to just the hephone soun. Auio Desription On Off This feture llows you to turn the TV spekers off when onneting the uio system. TV Spekers On/Off In the Soun menu, press B / to selet TV Spekers. Press n B / to selet Off. To turn on the uilt-in spekers: Selet On in step 2. Auio Desription is n itionl nrrtive soun trk for visully impire iniviuls to unerstn n enjoy the story line more fully. The letters AD will e isplye in the hnnel nner when progrmmes ontin AD ontent. In the Soun menu, press B / to selet Auio Desription n press OK. Press B / to selet Auio Desription n press n B / to selet On. The AD utton on the remote ontrol n lso e use to toggle the Auio Desription feture etween On n Off. To just the level of the uio esription soun to the min soun, highlight Mixing Level n press C /. < Auio Desription Auio Desription On Mixing Level

36 Wiesreen viewing Depening on the type of rost eing trnsmitte, progrmmes n e viewe in numer of formts. WIDE Use this setting when wthing wiesreen DVD, wiesreen vieo tpe or 16:9 rost (when ville). Due to the rnge of wiesreen formts (16:9, 14:9, 20:9 et.) lk rs my e visile on the top n ottom of the sreen. 4:3 Use this setting to view true 4:3 rost. SUPER LIVE This setting will enlrge 4:3 imge to fit the sreen y strething the imge horizontlly n vertilly, holing etter proportions t the entre of the imge. Some istortion my our. CINEMA When wthing ll sies pnel formt films/vieo tpes, this setting will eliminte or reue the lk rs t ll sies of the sreen y zooming in n seleting the imge without istortion. SUBTITLE When sutitles re inlue on letterox formt rost, this setting will rise the piture to ensure tht ll the text is isplye. SUBTITLE 14:9 Use this setting when wthing 14:9 rost. 36

37 NATIVE This setting will show the piture without oversn, i.e. WYSIWYG. PC NORMAL This setting will show the piture without oversn, i.e. WYSIWYG. This option is only ville when wthing PC signl soure vi HDMI or PC terminl. PC WIDE This setting will show the piture without oversn or sie pnels. This option is only ville when wthing PC signl soure vi HDMI or PC terminl. Dot y Dot Dot y Dot is non-sling isply. Depening on the input signl formt, the piture is isplye with sie pnels n/or rs t the top n ottom (e.g. VGA input soure). Press the utton on the remote ontrol to isply the list of ville wiesreen formts. Press the utton repetely to highlight the require formt. The Quik Menu feture n lso e use to selet Piture Size. Piture Size Wie 4:3 Super Live Cinem Sutitle 14:9 Ntive AV formt Piture Size PC Norml PC Wie Dot y Dot PC formt Using the speil funtions to hnge the size of the isplye imge (i.e. hnging the height/with rtio) for the purposes of puli isply or ommeril gin my infringe on opyright lws. 37

38 Piture ontrols Most of the piture ontrols n funtions re ville in oth igitl n nlogue moes. PLEASE NOTE: Fetures not ville will e greye out. This television offers the hoie of personlising the piture style. AutoView, Dynmi, Stnr, Hollywoo Night, Hollywoo Dy, Hollywoo Pro, Store, Gme n PC re preset options n ffet mny fetures/settings within the television. NOTE: Beuse the AutoView moe utomtilly justs piture settings se on mient light onitions n input signl ontent, the Auto Brightness Sensor n Expert Piture Setting is greye out when it is selete. Store moe is only ville when Lotion is set to Store. Gme moe is ville in externl input moe (other thn eril input). When you selet Gme moe, suitle wiesreen formts will e selete. PC moe is ville in RGB/PC input moe or HDMI input moe. Press n B / to highlight Piture ion n press OK. Piture Moe Press n B / to selet Piture Moe n press OK. < Piture You n ustomize urrent piture moe settings s esire. For exmple, while seleting Dynmi, if you hnge the following items, suh s Bklight, Contrst, Brightness, Colour, Tint, Shrpness n the Avne Piture Settings items, your new settings re sve for Dynmi piture moe. Piture preferenes In the Piture menu, press B / to selet either Bklight, Contrst, Brightness, Colour, Tint or Shrpness n press OK. Press C / to just the settings n press OK. Reset This feture resets ll piture settings to the ftory settings exept Piture Moe. In the Piture menu, press B / to selet Reset n press OK. A onfirmtion messge will pper. Press C / to selet Yes n press OK. ColourMster When ColourMster is set to On, it llows the Bse Colour Ajustment feture to eome ville. In the Piture menu, press B / to selet Avne Piture Settings n press OK. Press to selet ColourMster n press n B / to selet On or Off. Piture Moe Stnr Reset Bklight 0 Contrst 100 Brightness 0 Colour 0 Tint 0 Shrpness 0 Avne Piture Setting Expert Piture Setting Disply Setting < Avne Piture Settings ColourMster Bse Colour Ajustment Colour Temperture Auto Brightness Sensor Ative Bklight Control Blk/White Level Noise Reution Resolution+ ClerSn Reset Off On High Mile On High On Off Press B / to selet the piture moe you prefer n press OK. NOTE: The piture moe you selet ffets the urrent input only. You n selet ifferent piture moe for eh input. 38

39 The Bse Colour Ajustment feture llows the justment of iniviul olours to suit personl preferene. This n e useful when using n externl soure. Bse Colour Ajustment In the Avne Piture Settings menu, press B / to selet Bse Colour Ajustment n press OK. Press B / to selet n option n press to move to the justment winow. Bse Colour Ajustment Hue Sturtion Brightness Re Green Blue Yellow Mgent Cyn When the Auto Brightness Sensor is tivte, it will utomtilly optimise the klighting levels to suit mient light onitions. In the Avne Piture Settings menu, press B / to selet Auto Brightness Sensor n press OK. Press B / to selet On or Off n press OK. When the Ative Bklight Control feture is tivte, it will ontrol the klighting levels epening on vrious senes suh s piture motion, right sene or rk sene. Auto Brightness Sensor Ative Bklight Control In the Avne Piture Settings menu, press B / to selet Ative Bklight Control n press OK. Reset Eit Press C / to selet Hue, Sturtion or Brightness n press B / to just the settings s require. Hue Sturtion Brightness Press B / to selet High, Low or Off n press OK. High: To ontrol the klighting levels epening on vrious senes suh s piture motion, right sene or rk sene Low: To ontrol the klighting levels for rk sene Press BACK to return to the previous menu. To return to the ftory settings, selet Reset n press OK. Colour Temperture inreses the wrmth or oolness of the piture y inresing the re or lue tint. Re Colour Temperture In the Avne Piture Settings menu, press B / to selet Colour Temperture n press OK. Blk/White Level inreses the strength of rk res of the piture to improve the efinition. Blk/White Level In the Avne Piture Settings menu, press B / to selet Blk/White Level n press OK. Press B / to selet High, Mile, Low or Off n press OK. Press B / to selet Colour Temperture n press OK. Press B / to selet Cool, Nturl or Wrm to suit your preferene n press OK. Press B / to selet Re Level, Green Level or Blue Level n press C / to just the level. NOTE: To return the justments to the ftory efults, selet Reset n press OK. 39

40 When wthing DVD, the ompression my use some wors or piture elements to eome istorte or pixelte. Using the MPEG NR feture reues this effet y smoothing out the eges. MPEG NR Noise Reution In the Avne Piture Settings menu, press B / to selet Noise Reution n press OK. Press to selet MPEG NR n press OK. ClerSn This feture helps to eliminte vieo shking. In the Avne Piture Settings menu, press B / to selet ClerSn n press OK. Press B / to selet High, Mile, Stnr or Off. Resetting the vne piture settings Press B / to selet Off, Low, Mile or High to suit your preferene n press OK. NOTE: If the piture moe is set to Gme or PC, this feture is not ville. DNR llows you to soften the sreen representtion of wek signl to reue the noise effet. Selet DNR from the Noise Reution menu. Press B / to selet Off, Low, Mile, High or Auto n press OK. The ifferenes my not lwys e notiele (for the est result use lower settings s piture qulity n e lost if the setting is too high). NOTE: If the piture moe is set to Gme or PC, this feture is not ville. The Resolution+ feture llows you to just the lrity levels for your esire piture settings. < Noise Reution MPEG NR DNR In the Avne Piture Settings menu, press B / to selet Resolution+ n press OK. Press B / to selet On. Low Auto DNR Digitl Noise Reution Resolution + NOTE: This feture my not work properly epening on the ontent. Noise my pper in the piture epening on the evie onnete to the TV (e.g. evie with speifi enhner funtion). This feture llows you to reset the urrent Avne Piture Settings to the efult vlues. In the Avne Piture Settings menu, press B / to selet Reset. Press OK. This feture is ville when the Piture Moe option is Stnr, Hollywoo Dy, Hollywoo Night, n Hollywoo Pro. Test Pttern When the test pttern is on sreen, you n nvigte in the Piture sumenus n just piture settings without removing the imge. When you move to non-piture menu, or lose the menus, regulr vieo will e restore. In the Piture menu, press B / to selet Expert Piture Settings n press OK. Press B / to selet Test Pttern n press OK. Press B / to selet On n press OK. RGB Filter This feture iniviully enles or isles the re, green, n lue omponents of the piture to llow for more urte justment of eh olour. In the Expert Piture Settings menu, press B / to selet RGB Filter n press OK. Press B / to selet Re, Green or Blue to just n press OK. Press B / to selet On n press OK. Press B / to selet Colour or Tint n press C / to just. e Expert Piture Settings Press OK. NOTE: It is not possile to turn off ll three olours simultneously. 40

41 Colour Deoing If you view DVDs with this TV, the Colour Deoing option my e set to ensure the olourimetry reproution. NOTE: The moes exluing Auto (BT.709 n BT.601) re to onvert n irregulr signl output from the DVD et. with inorret olour to the optimum stte. If BT.709 or BT.601 is selete with norml signl reeive, the olour my not e orretly isplye. This feture shoul normlly e set to Auto. In the Expert Piture Settings menu, press B / to selet Colour Deoing n press OK. Press B / to selet Auto, BT.709 or BT.601 n press OK. White Blne-Winow Disply This feture isplys speil Winow Pttern to e use when justing white lne with mesuring evie. In the Expert Piture Settings menu, press B / to selet White Blne n press OK. Press B / to selet Winow Disply n press n B / to selet On n press OK. White Blne-Setting Type You n hoose from two types of White Blne justment. In the Expert Piture Settings menu, press B / to selet White Blne n press OK. Press B / to selet Setting Type n press OK. Press B / to selet 2P or 10P n press OK. White Blne-10P White Blne Press to selet 10P White Blne. Press B / to selet IRE, Re, Green, or Blue. Press C / to just n press OK. NOTE: The justments me for Re / Green / Blue re store seprtely for eh IRE setting. (There re ten IRE settings from 10 to 100.) Gmm Clirtion Toshi hs integrte piture lirtion systems into its LCD televisions. Now you n enjoy the enefits of utomtilly lirte gmm n white levels. In orer to tke vntge of these fetures the Toshi olour nlyzer TPA-1 is require. e In the Expert Piture Settings menu, press B / to selet Gmm Clirtion n press OK. Press B / to selet Apply Clirtion n press n B / to selet Enle n press OK. Press B / to selet Auto Gmm Clirtion n press OK. Connet the USB olour nlyzer to the USB 1 or USB 2 port. Input the trget vlue n ple the USB olour nlyzer over the squre on sreen. Auto Gmm Clirtion Plese input the trget vlue n ple the USB olour nlyser over the squre. White Blne-2P White Blne Press to selet 2P White Blne n press OK. Press B / to selet Re-Offset, Green-Offset, Blue-Offset, Re-Gin, Green-Gin, or Blue- Gin. A white squre will pper on the sreen. Press C / to just n press OK. f Highlight Strt n press OK. Auto Gmm Clirtion will strt. Plese wit until you see Auto Gmm Clirtion hs een omplete. on sreen. To return to ftory setting Trget Colour Temperture Trget Gmm Strt Highlight Reset n press OK. x y (D65) 2.4 Reset 41

42 When this television reeives true Wiesreen piture n Auto Formt is On, it will utomtilly e isplye in Wiesreen formt irrespetive of the television s previous setting. Press n B / to highlight Piture ion. Automti Formt (Wiesreen) Press n B / to selet Disply Settings n press OK. Press B / to selet Auto Formt n press OK. Press B / to selet On or Off n press OK. < Disply Settings Auto Formt On 4:3 Streth Off Piture Position PC Settings The piture position my e juste to suit personl preferene n n e prtiulrly useful for externl inputs. NOTE: The Piture Position feture nnot e selete on DTV or PC Inputs. In the Disply Settings menu, press B / to selet Piture Position n press OK. Press B / to selet n option n press C / to just the settings n press OK. The options iffer epening on the urrently selete wiesreen formt n the input signl. < Piture Position Piture Position Horizontl Position 0 Vertil Position 0 Reset When 4:3 Streth is tivte, the size swithing system hnges 4:3 progrmmes into full sreen piture. 4:3 Streth In the Disply Settings menu, press B / to selet 4:3 Streth n press OK. Press B / to selet On or Off n press OK. To return to the originl ftory settings, selet Reset in the Piture Position menu n press OK. This feture is use to hol still imge on the sreen. Piture still Press r to hol n imge on the sreen, n press r gin to nel. When the HDMI Informtion Disply feture is On n you re wthing n HDMI input soure, pressing isplys the HDMI signl informtion nner. HDMI Informtion Disply In the Options menu, press B / to selet HDMI Informtion Disply n press OK. Press B / to selet On. HDMI signl informtion is s follows: Resolution, Sn Type, Frme Rte, Aspet, Bit Depth, Colour Spe, RGB/YUV, Chrom Formt, n Content Type (if ville). 42

43 Wireless LAN Informtion Bluetooth n Wireless LAN evies operte within the sme rio frequeny rnge n my interfere with one nother. If you use Bluetooth n Wireless LAN evies simultneously, you my osionlly experiene less thn optiml network performne or even lose your network onnetion. If you shoul experiene ny suh prolem, immeitely turn off either your Bluetooth or Wireless LAN evie. Atul performne n vry, inluing lower wireless network pity, t throughput rte, rnge n overge. Performne epens on mny ftors, onitions n vriles, inluing istne from the ess point, volume of network trffi, uiling mterils n onstrution, operting system use, mix of wireless prouts use, interferene n other verse onitions. Wireless LAN n your Helth Wireless LAN prouts, like other rio evies, emit rio frequeny eletromgneti energy. The level of energy emitte y Wireless LAN evies, however, is fr less thn the eletromgneti energy emitte y wireless evies suh s moile phones. Beuse Wireless LAN prouts operte within the guielines foun in rio frequeny sfety stnrs n reommentions, TOSHIBA elieves Wireless LAN is sfely use y onsumers. These stnrs n reommentions reflet the onsensus of the sientifi ommunity n result from eliertions of pnels n ommittees of sientists who ontinully review n interpret the extensive reserh literture. In some situtions or environments, the use of Wireless LAN my e restrite y the proprietor of the uiling or responsile representtives of the orgnistion. Suh restritions my pply in environments where the risk of interferene to other evies or servies is pereive or ientifie s hrmful. If you re unertin of the poliy tht pplies to the use of wireless evies in speifi orgnistion or environment, you re enourge to sk for uthoriztion to use the Wireless LAN evie prior to turning on the equipment. When using the TV uner wireless LAN environment: NOTE: When Enryption is set to None, t trnsmitte over wireless LAN is not seurely protete. Unuthorize users my ess your t n network without pproprite seurity mesures. Seleting n enryption setting from your Toshi TV n using seure network for wireless LAN trnsmissions my help voi unuthorize ess to your importnt t n/or TV. Toshi islims ny n ll responsiility or liility resulting from ny wireless trnsmissions over the Internet through your Toshi TV. The funtion of ll IEEE is not supporte. The -ho moe is not supporte. It is reommene to use IEEE or IEEE n on 5 GHz for uio n SD vieo streming. It is reommene to use IEEE n on 5 GHz for HD vieo streming. It is reommene tht the enoing rte for streming vieo ontent is 20 Mps or less. It is not reommene to use 2.4 GHz for uio n vieo streming. Content plyk my e interrupte y vrious surrouning interferene. Europe Sttement This Built-in WLAN Moule my e operte in elow ountry: AT Austri IS Ieln BE Belgium LI Liehtenstein CH Switzerln LT Lithuni CY Cyprus LU Luxemourg CZ Czeh Repuli LV Ltvi DE Germny MT Mlt DK Denmrk NL Netherlns ES Spin NO Norwy FI Finln PL Poln FR Frne PT Portugl GB Unite Kingom SE Sween GR Greee SI Sloveni EE Estoni SK Slovki HU Hungry BG Bulgri IT Itly RO Romni IE Ireln TR Turkey If this evie is going to e operte in the frequeny rnge of 5.15 GHz to 5.35 GHz, it is restrite to inoor use. If this evie is going to e operte for /g/n funtion in the frequeny rnge of GHz to GHz in Frne, it is restrite to inoor use. A generl uthoriztion is require for using this evie outoors or in puli ples in Itly. This evie is NOT ALLOWED to e use in the geogrphil re within rius of 20 km from the entre of Ny-Alesun in Norwy. Mke the wireless LAN pproprite seurity setting t the time of wireless LAN use to prevent the illegl use, spoofing n intereption of ommunitions. Don't onnet wireless LAN to n outsie network iretly. Apply the wireless LAN ess point with router funtion or ron router. Mke the router pproprite seurity setting to prevent the illegl use. Refer to the mnul of router for seurity setting. 43

44 Setting up the Network You n selet the Network Type. Press n B / to highlight Network ion. Press n B / to selet Network Setup n press OK. Esy Setup using PBC (Push Button Configurtion) In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Wireless Setup n press OK. < Network Network Setup Network Devie Setup Smrt Apps Setup Press B / to selet Esy Setup n press OK. < Wireless Setup Press B / to selet Connetion Type n press n B / to selet Wire or Wireless. < Network Setup Connetion Type Wireless Setup Avne Network Setup Network Connetion Test Wireless If you selete Wire, see Avne Network Setup on pge 47. NOTE: After you hnge etween Wireless n Wire, swith off n on AC power supply to reset your TV. Communition my e impossile fter the hnge of Wireless / Wire. Wireless Setup Wire Wireless NOTE: Continue onnetion of AP (Aess Point) is not gurntee. The onnetion my e isonnete while wthing TV. There re 3 methos for Wireless Setup Esy Setup (WPS) If the AP supports WPS, this metho n e use. WPS is n inustry stnr esigne to mke onnetion of wireless LAN equipment n seurity setup esy. WPS will utomtilly onfigure ll wireless settings. NOTE: WEP enryption my not e le to onfigure y esy setup. Assiste Setup (setup y using the AP s notifition informtion) Network Nme, Authentition, n Enryption re eie se on informtion from the AP. You will mnully set the Seurity Key. Mnul Setup (mnul input of ll settings) e f g Press n B / to selet PBC. Press to highlight Strt Sn n press OK. Following the on-sreen instrutions, push the pproprite utton on your AP. When winow reporting tht the setup is omplete ppers, press OK. Esy Setup using PIN (Personl Ientifition Numer) e f g Esy Setup Assiste Setup Mnul Setup In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Wireless Setup n press OK. Press B / to selet Esy Setup n press OK. Press n B / to selet PIN. Press to selet Strt Sn n press OK. Press B / to selet the esire AP n press OK. NOTE: Chek the Network Nme n/or MAC ress on the lel of the AP or in the mnul, n selet your AP. When the PIN oe winow ppers, enter the isplye PIN into your AP, n then press Next to ontinue the PIN Setup. When messge isplys to report tht the setup is omplete, press OK. 44

45 To nel serhing for the AP: Press BACK while serhing for the AP. A messge will pper, n then press C / to selet Yes n press OK. Assiste Setup e f g In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Wireless Setup n press OK. Press B / to selet Assiste Setup n press OK. < Wireless Setup Esy Setup Assiste Setup Mnul Setup Press B / to selet the esire AP n press OK. NOTE: Chek the MAC ress on the lel of the AP or in the mnul, n selet your AP. Highlight Seurity Key n press OK. The Softwre Keyor winow will pper. Input the Seurity Key y using the Softwre Keyor (see pge 49). To sve your setting, press the GREEN utton. NOTE: The Seurity Key must here to these onitions: - TKIP/AES: 8-63 ASCII or 64 Hex hrters - WEP: 5 or 13 ASCII or 10 or 26 Hex hrters There is only one key ID to set for WEP enryption. Highlight Done n press OK. NOTE: If Network Nme is not isplye, see step 3 n 4 in Mnul Setup to set Network Nme efore pressing Done. NOTE: Settings re not sve if BACK is presse efore Done is selete. Mnul Setup e f g h i j In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Wireless Setup n press OK. Press B / to selet Mnul Setup n press OK. Press B / to selet Network Nme n press OK. The Softwre Keyor winow will pper. Input the Network Nme y using the Softwre Keyor (see pge 49). To sve your setting, press the GREEN utton. Press B / to selet Authentition n press n B / to selet Open System, Shre Key, WPA-PSK or WPA2-PSK. Press B / to selet Enryption n press n B / to selet None, WEP, TKIP or AES. NOTE: Certin enryption types re only omptile with speifi uthentition types. - When Authentition is Open System, only WEP or None is omptile. - When Authentition is Shre Key, only WEP is omptile. - When Authentition is WPA-PSK or WPA2- PSK, only TKIP or AES is omptile. When inomptile Authentition/Enryption pirings re etete, wrning messge will e isplye, n no onnetion ttempt will e me until the inomptiility is resolve. There is only one key ID to set for WEP enryption. Press B / to selet Seurity Key n press OK. Input the Seurity Key y using the Softwre Keyor (see pge 49). To sve your setting, press the GREEN utton. NOTE: This item is greye out when Enryption is None. Highlight Done n press OK. NOTE: When Enryption is None, messge will pper. Press C / to selet Yes n press OK. NOTE: Settings re not sve if BACK is presse efore Done is selete. 45

46 Wireless Informtion The settings onfigure in Wireless Setup n e onfirme. Press QUICK to open the Quik Menu. Press B / to selet Wireless Informtion n press OK. Quik Menu Intel WiDi Piture Moe Stnr Piture Size Wie 3D Settings More Informtion Chnnel Options Sleep Timer HDMI CEC Devie Control Spekers TV Spekers Hephone Level 30 Wireless Informtion Reoring Informtion When the Network Type is Wireless, Wireless Informtion winow will pper. NOTE: Press the RED utton to sn for ll APs. Item Desription Sttus Connete is isplye when the TV is onnete with the AP. Disonnete is isplye when the TV is not onnete with the AP. Signl Connetion signl strength with AP (STRONG/MEDIUM/WEAK) Spee Link with AP Moe Working moe (11, 11, 11g, 11n) Network SSID set Nme Authentition Authentition set Enryption Enryption set Seurity Key Seurity Key set AP MAC Aress TV MAC Aress DHCP IP Aress Sunet Msk Defult Gtewy DNS The AP s MAC ress is isplye when the TV is onnete with the AP. The MAC ress of the TV(Wireless) is isplye. Enle is isplye when using DHCP. Disle is isplye when not using DHCP. The TV s IP ress Vlue of the Sunet Msk Aress of the Defult GATEWAY Aress of the DNS NOTE: Even if n AP for IEEE n is use when Enryption is set to WEP or TKIP, the Spee vlue might e low. It is reommene tht Enryption e hnge to AES (see Mnul Setup on pge 45). Notes on wireless LAN environment The funtion of ll IEEE is not supporte. The -ho moe is not supporte. It is reommene to use IEEE or IEEE n on 5 GHz for uio n SD vieo streming. It is reommene to use IEEE n on 5 GHz for HD vieo streming. It is reommene tht the enoing rte for streming vieo ontent is 20 Mps or less. It is not reommene to use 2.4 GHz for uio n vieo streming. Content plyk my e interrupte y vrious surrouning interferene. 46

47 Avne Network Setup NOTE: When the DHCP funtion of the router onnete with this TV is On, you n set Auto Setup to On or Off. (This shoul usully e set to On.) When the DHCP funtion of the router is Off, set Auto Setup to Off, n set the IP Aress mnully. Highlight Auto Setup n press n B / to selet Off. IP Aress Setup Auto Setup IP Aress Sunet Msk Defult Gtewy Off xxx. xxx. xxx. xxx xxx. xxx. xxx. xxx xxx. xxx. xxx. xxx On Off IP Aress Setup Auto Setup e Press B / to selet IP Aress. In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Avne Network Setup n press OK. < Network Setup Connetion Type Wireless f Press C / to highlight the fiel you wnt to hnge, n then use the numer uttons to input the IP ress. To sve the setting, press OK. NOTE: IP ress fiel numers must e etween 0 n 255. After eh fiel numer hs een set, press OK to store the entire ress. If the entire IP Aress is invli, wrning messge will pper fter OK is presse. Wireless Setup Avne Network Setup Network Connetion Test g Press B / to selet Sunet Msk, n eit in the sme wy s IP Aress. Press B / to selet IP Aress Setup n press OK. IP Aress Setup Auto Setup IP Aress Sunet Msk Off xxx. xxx. xxx. xxx xxx. xxx. xxx. xxx Defult Gtewy xxx. xxx. xxx. xxx < Avne Network Setup IP Aress Setup DNS Setup MAC Aress h Press B / to selet Defult Gtewy, n eit in the sme wy s IP Aress. Highlight Auto Setup n press n B / to selet On. NOTE: If you mnully set the IP ress, you must not use the sme IP ress for ny other evie. The IP ress you use shoul e privte ress. IP Aress Setup Auto Setup IP Aress Sunet Msk Defult Gtewy On On Off NOTE: Other items will e greye out when Auto Setup is set to On. Mnul Setup In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Avne Network Setup n press OK. Press B / to selet IP Aress Setup n press OK. 47

48 NOTE: When the DHCP funtion of the router onnete to this TV is Off, set Auto Setup to Off, n mnully set the DNS ress(es). Your internet servie provier shoul hve provie these to you. Auto setup In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Avne Network Setup n press OK. Press B / to selet DNS Setup n press OK. Press B / to highlight Auto Setup n press n B / to selet On. NOTE: Other items will e greye out when Auto Setup is set to On. Mnul setup DNS Setup In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Avne Network Setup n press OK. Press B / to selet DNS Setup n press OK. Press B / to selet Auto Setup n press n B / to selet Off. MAC Aress You n view the fixe MAC ress for the TV (Wire n Wireless). In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Avne Network Setup n press OK. Press B / to selet MAC Aress n press OK. This funtion heks the Internet onnetivity. In the Network menu, press B / to selet Network Setup n press OK. Press B / to selet Network Connetion Test n press OK. A messge will pper to inite if the onnetion ws suessful or if it oul not e omplete. NOTE: The result of Network Connetion Test oes not lwys gurntee the onnetion. To nel the Network Connetion Test: Network Connetion Test Press EXIT while testing. DNS Setup Auto Setup Primry DNS Aress Seonry DNS Aress Off xxx. xxx. xxx. xxx xxx. xxx. xxx. xxx On Off e f g Press B / to selet Primry DNS Aress. Press C / to highlight the fiel you wnt to hnge, n then use the numer uttons to input the Primry DNS Aress. To sve the setting, press OK. NOTE: DNS ress fiel numers must e etween 0 n 255. If you input n inomptile numer n press OK, the fiel numer will reset to the mximum vlue(255). Press B / to selet Seonry DNS Aress, n eit in the sme wy s Primry DNS Aress. 48

49 You n enter text y using the Softwre Keyor. The Softwre Keyor winow will pper when you press OK on fiel tht epts hrter input. To enter text using the softwre keyor: Using the softwre keyor Highlight the esire hrter on the on-sreen softwre keyor. Press OK. Repet steps 1 n 2 until you hve entere ll esire text. Press the GREEN utton to sve your settings n return to the previous sreen. NOTE: If BACK is presse, hnges re not sve n the softwre keyor winow is lose. The text will remin s it ws efore strting the keyor. Network Devie Setup Toshi Apps llow you to ontrol the TV from network onnete tlet or smrtphone (vilility is epenent on ountry). In orer to use this funtion, the Setting up the Network (see pge 44) n Devie Nme Setup (see pge 50) re require. The Devie Nme will isply on the sreen of Apps (tlet or smrtphone) pplition. New Devie Detetion Apps Control Profile In the Network menu, press B / to selet Network Devie Setup n press OK. Press B / to selet Externl Control Setup n press OK. < Network Devie Setup Externl Control Setup Mei Renerer Devie Nme Setup Intel WiDi Setup Off Open Done Press B / to selet Apps Control Profile n press OK. q z w s e r f t g y h u j i k o l p - _ x v n ; 4 ghi 7 pqrs 2 5 jkl 8 tuv 3 ef 6 mno 9 wxyz Press B / to selet New Devie Detetion n press n B / to selet Enle.?&# 0 < Apps Control Profile Input opertion on the remote ontrol: Button Desription OK Inputs the selete hrter. 0-9 Selets hrter for entry. BC Moves the hrter highlight. RED Deletes 1 hrter to the left of the ursor. GREEN Funtions s Done. YELLOW Funtions s Shift key. BLUE Displys the help winow. BACK Closes the Softwre Keyor winow without sving hnges. Devie Registrtion Setup New Devie Detetion Disle Enle Disle Piring To use Apps, it is neessry to onnet omptile tlet or smrtphone n this TV to your home network, n rry out piring (using 4 or 8 igit psswor to uthentite the evie). Refer to the Apps mnul for more etils out piring. NOTE: Piring with externl evies nnot e rrie out when the TV is onnete to n unenrypte wireless LAN ess point. Ativte the enryption settings for the wireless LAN ess point efore rrying out Piring. When the Enle Control is not set to ON in Externl Control Setup, Apps funtions inluing Piring nnot e use. 49

50 Devie Registrtion Setup One User Nme hs omplete uthentition, it is store in the TV long with the psswor. The upper limit for the numer of Use Nmes tht n e rememere is 20. You n elete User Nmes tht re store in the TV. e f In the Network menu, press B / to selet Network Devie Setup n press OK. Press B / to selet Externl Control Setup n press OK. Press B / to selet Apps Control Profile n press OK. Press B / to selet Devie Registrtion Setup n press OK. The Devie Registrtion Setup sreen will pper n the list of Compnion Devie ID mnge y the TV will e isplye. Press B / to highlight the Compnion Devie ID. Press B / to selet the Cnel, All, or Delete uttons n press OK. NOTE: When re-registering evie whih hs een elete from the list, registrtion must e rrie out gin. When the TV is onnete to the home network vi Wireless LAN, with the TV Power On Control in Enle, your TV n e turne on y ontrol from Apps. TV Power On Control (Ative Stny) In the Options menu, press B / to selet Power Mngement n press OK. Press B / to selet TV Power On Control n press n B / to selet Enle (Ative Stny). NOTE: Depening on the evie onnete to the home network, it my tke while for the TV to turn on. Depening on the evie onnete to the home network, this feture my not work. If the unenrypte Wireless Setup is one, this feture n not e use. The power onsumption uring Ative Stny is more thn it uring Norml Stny. After the hnge from Power On stte to Ative Stny, there my e perio of severl ten seons whih oes not reeive the opertion from remote ontrol or externl pprtus. The TV n e onfigure s mei renerer. When operting s mei renerer, the TV isplys ontent provie y mei server. The seletion of the mei is one y mei ontroller. The TV n ply photo, movie, or uio files when operting s mei renerer. In the Network menu, press B / to selet Network Devie Setup n press OK. Press B / to selet Mei Renerer n press n B / to selet On. If request omes from mei ontroller, prompt will pper n the Mei Renerer funtion will strt. To exit the Mei Renerer: Press EXIT. Terminology DMS: Digitl Mei Server DMR: Digitl Mei Renerer DMC: Digitl Mei Controller NOTE: You nnot use 3D funtion in operting s mei renerer. e Mei Renerer Setup Devie Nme Setup The TV s evie nme n e hnge. In the Network menu, press B / to selet Network Devie Setup n press OK. Press B / to selet Devie Nme Setup n press OK. The Devie Nme Setup sreen will pper. Press B / to selet Devie Nme n press OK. The Softwre Keyor winow will pper. Input the Devie Nme y using the softwre keyor (see pge 49). To sve your setting, press the GREEN utton. NOTE: The Devie Nme n e up to 15 hrters long. Only the 0-9, - n A-Z (upperse only) hrters my e use for the evie nme. Press to highlight Done n press OK to sve your setting. 50

51 USB HDD Reor Funtion This funtion n e use to reor n ply igitl rost progrmmes (funtion is epennt on ountry seletion). Re the preutions elow efore reoring or viewing progrmmes using the USB HDD reor funtion. NOTE: In orer to use this funtion, USB HDD nees to e onnete to the TV. Do not use USB Hu. After reoring opertion, time my tke to reoring strt. Reore progrmmes sve on the USB HDD n only e viewe on this TV. They nnot e viewe when onnete to nother TV (inluing the sme moel of TV), PC, or other evie. You nnot wth other hnnel while reoring one hnnel. If the reoring time to the USB HDD is too short, no t my e sve. You nnot reor vieo input signls on the USB HDD. Not ll types of rost my e reorle. After progrmming the TV to reor igitl rosting, o not isonnet the power plug efore reoring strts. Shoul vieo or uio reoring fil ue to mlfuntion of the TV or poor reeption, no ompenstion woul e pi. If there is power filure or the power plug is isonnete uring progrmme reoring, reoring will stop n will not resume when the power returns or the plug is reonnete. Do not isonnet the power plug when the initor LED is lit. Any hnges implemente y the rosting sttion my ffet progrmme sheuling. Sheuling of multiple onseutive progrmmes my result in the eginning of eh progrmme not eing reore. Aurte strt / finish time for reoring is relint on rosters mintining orret time stmp if this not the se the reoring will fil. Some rosters n ontrol whether progrm n e reore or how long you my e le to view it for fter reoring. The on sreen messge Retention limit expire mens tht the time limit for viewing the progrm hs lpse. Progrmme reoring nnot tke ple if the power plug is not onnete. Disonneting the power plug uring reoring my result in filure to sve the reore progrmme. USB HDD reoring feture is not ville in ll ountries. When the USB HDD is formtte, ll the t store on the HDD will e erse. To onnet USB HDD (not supplie): When you onnet USB HDD to the USB port on the TV, prompt will pper. Press C / to selet No n press OK. NOTE: Not gurntee to work with ll USB HDD. To reor the progrmme urrently eing viewe. Press the REC utton on the remote ontrol. The urrently viewe progrmme will strt to e reore. To stop reoring: Setting up the USB HDD for reoring USB1 or USB2 on the TV USB le (not supplie) To reor DTV progrmmes (One Touh Reoring) Press the v (stop) utton. A onfirmtion winow Do you wnt to stop Reoring? will pper. Press C / to selet Yes n press OK. Reoring will stop. USB HDD 51

52 Progrmme reoring n e sheule esily using the Progrmme Guie or y speifying the te n time. PLEASE NOTE When time progrmme is out to strt, n informtion sreen will pper offering the option of wthing or nelling the progrmme. Other hnnels will not e ville uring the time progrmme unless the progrmme timer is nelle. It will only e possile to rete or eit progrmme timers for the urrently tune DTV input. Using the Progrmme Guie to set future reorings How to set reorings vi the Progrmme Guie Press GUIDE on the remote ontrol to isply the Eletroni Progrmme Guie (EPG). To serh for n reor progrmme using Genre Serh: Press the YELLOW utton on the remote ontrol to ess the Genre Serh sreen. Genre Serh Movie 5:48 Tue, 22 Apr 34 AB1 Hr Rin We,27 Apr 0:15-1:45 31 PARIS PREMIERE Re Corner We,27 Apr 22:15-23:55 11 NT1 The Lwnmower Mn Thu,28 Apr 1:20-3:00 9 W9 A Vow to Kill Fri,29 Apr 1:30-3:00 34 AB1 Prenthoo St,30 Apr 0:45-2:40 11 NT1 Boy n Soul St,30 Apr 1:15-3:00 31 PARIS PREMIERE The Nun s Story St,30 Apr 15:00-17:30 9 W9 Re Corner St,30 Apr 23:20-1:15 11 NT1 The Rel Blone Sun,1 My 0:40-2:00 31 PARIS PREMIERE Critters Sun,1 My 0:40-2:20 11 NT1 Inin Jones n Sun,1 My 21:10-23:20 the Temple of Doom 11 NT1 The jkl Sun,1 My 23:20-1:15 34 AB1 Coup De Ville Mon,2 My 1:10-3:00 Press BC to highlight the progrmme you wnt to reor n press OK. The Eit Timer sreen will pper. Press B / to selet Timer Type. Eit Timer The Dily Politis 10:50 Tue, 26 Apr Press C / to selet the genre. Progrmmes liste will hnge for the new genre. Press B / to selet the progrmme for whih you wnt to sheule reoring. Press OK. The Eit Timer sreen will pper. Press B / to selet Timer Type. 2 CABC Chnnel 11:30-12:30 Tue, 26 Apr Timer Type Reoring Eit Timer The Dily Politis 2 CABC Chnnel 10:50 Tue, 26 Apr Set Timer Delete Timer 11:30-12:30 Tue, 26 Apr Timer Type Reoring e Press n B / to selet Reoring n press OK. Press B / to highlight Set Timer n press OK. Set Timer Delete Timer Press n B / to selet Reoring n press OK. e Press B / to highlight Set Timer n press OK. 52

53 To progrmme the timer: Press the BLUE utton on the remote ontrol. Selet the unprogrmme olumn (lnk olumn) n press OK. The Eit Timer sreen will pper. Press B / to selet Timer Type. Eit Timer 5:51 Tue, 22 Apr Timer Type Reminer Chnnel 30 CABC Chnnel Dte Tue, 22 Apr 2013 Strt Time 10:51 En Time 11:51 Repet One To sheule progrmme using the informtion sreen: Press, the informtion sreen will pper giving etils of the hnnel n progrmme urrently eing viewe. D+ 3D 2D 4 CHANNEL Z 6:00 Thu, 11 Ot Sie y Sie Now MLB Young s two-run triple les AL over NL 6:00-8:00 HD 16:9 AD 18 News 15 min left Next Worl News n Sports 8:00-9:00 Set Timer Delete Timer Also MLB Young s two-run triple les AL over NL Press n B / to selet Reoring n press OK. Press B / to go through the list ing the etils of the progrmme y using the numer uttons n C / to mke seletions. Chnnel Selet the hnnel you wish to reor. Dte Selet the te tht you wish reoring to strt. Press B / to selet Next n press OK. The Eit Timer menu will pper. Press B / to selet Timer Type. Eit Timer The Dily Politis 2 CABC Chnnel 11:30-12:30 Tue, 26 Apr Timer Type Set Timer Chnge 10:50 Tue, 26 Apr Delete Timer Reoring Strt Time Selet the time to strt reoring. En Time Selet the time to en reoring. Repet Selet One, Dily or Weekly. Press n B / to selet Reoring n press OK. Press B / to highlight Set Timer n press OK. One Dily Weekly The selete ontent is reore one. The sme time slot on the sme hnnel is reore every y on n fter the selete y. The sme time slot on the sme hnnel on the sme y of the week is reore on n fter the selete y. e Press B / to highlight Set Timer n press OK. 53

54 To hek, eit or elete sheuling informtion You n hek, eit or elete sheuling informtion. Press GUIDE n then press the BLUE utton. Progrmme Timers sreen will pper. To view reore progrmme To view the reore Lirry sreen n selet title from the reore progrmme list. Press n highlight My Reorings ion n press OK. The Lirry sreen will pper. Reoring List Depening on the trnsmitter informtion, the progrmme rost time or other informtion my not e orretly isplye in the reoring list. The progrmme oes not pper in the reoring list immeitely t the strt of reoring, ut ppers few minutes fter reoring strts. Up to 64 progrmmes n e isplye in the reoring list. If the hnnel settings re hnge, the igitl hnnel numer, or other informtion my not pper orretly in the reoring list. As the isplye progrmme time is lulte from the tul reoring informtion, it my not mth the reoring time on the USB HDD. To hek sheule: Press B / on the Progrmme Timers sreen to hek the sheule. To eit sheule: Press B / on the Progrmme Timers sreen to selet the title whose sheule you wnt to eit n press OK. The Eit Timer sreen will pper. Chnge the settings s require, following the sme proeure s for setting the sheule. Press B / to highlight Set Timer n press OK. To elete sheule: Press B / on the Progrmme Timers sreen to selet the title whose sheule you wnt to elete. Press the RED utton. Press C / in the isplye onfirmtion winow to selet Yes n press OK. The selete sheule will e elete. NOTE: You n lso elete sheule y seleting Delete Timer from the Eit Timer menu for eh progrmming metho. Lirry / All All Sort : New 3 / 5 WWWWWW We, 16 Fe 10:00 WWWWWWWWWWWW We, 16 Fe 10:00 WWWWWWW Thu, 17 Fe 10:00 WWWWWWW Thu, 17 Fe 10:00 WWWWWWW Fri, 18 Fe 10:00 WWWWWWW Fri, 18 Fe 10:00 WWWWWWW Fri, 18 Fe 10:00 WWWWWWW St, 19 Fe 10:00 WWWWWWW Sun, 20 Fe 10:00 WWWWWWW Sun, 20 Fe 10:00 WWWWWWW Sun, 20 Fe 10:00 WWWWWWW Mon, 21 Fe 10:00 14:15 We, 16 Fe 1235 ITV Lonon ASTRA 19.2 E 10 July :30(01:30) USB HDD3 Remining Cpity: 86% (912.0GB) Press B / to selet the title you wnt to view. A preview of the ontent selete n e seen on the preview sreen. To hnge the orer in whih the titles re liste, press the BLUE utton. Press OK. Viewing strts. ion ppers next to the title urrently eing reore. When the title urrently eing reore is selete n OK is presse, plyk will strt from the eginning of the progrmme urrently eing reore. Opertions uring viewing The following opertions n e performe using the remote ontrol uttons. To PLAY To FAST FORWARD v To STOP z To SKIP- FORWARD W To PAUSE/STEP C To shift plyk position Z To SKIP-BACK CC To REWIND 54

55 Opertions from the Lirry sreen As well s viewing the list of reore titles on the Lirry sreen, you n protet or elete titles n register titles to Personl Moe. To isply the Lirry sreen: Press n highlight My Reorings ion n press OK. The Lirry sreen will pper. To elete reore progrmme: Press the RED utton. Chek oxes will pper next to the titles. Press B / to selet the title you wnt to elete n press OK. A hek mrk will e inserte in the hek ox. Lirry / All To protet or unprotet reore progrmme: Proteting progrmme prevents it from eing ientlly elete. Selet the title of the progrmme you wnt to protet n press the GREEN utton. ion ppers next to the title n the progrmme is protete. If Protet is set to On when the progrmme is reore, ion ppers next to the title of the reore progrmme. When title with ion is selete n the GREEN utton is presse, ion isppers n the progrmme is unprotete. To group the reore progrmmes Press the YELLOW utton. A grouping moe winow will pper. Week: Grouping the reore progrmme y the y (Suny - Stury) Genre: Grouping the reore progrmme y the genre. To hnge the title of reore progrmme Lirry / All All Sort : New 3 / 5 WWWWWW We, 16 Fe 10:00 WWWWWWWWWWWW We, 16 Fe 10:00 WWWWWWW Thu, 17 Fe 10:00 WWWWWWW Thu, 17 Fe 10:00 WWWWWWW Fri, 18 Fe 10:00 WWWWWWW Fri, 18 Fe 10:00 WWWWWWW Fri, 18 Fe 10:00 WWWWWWW St, 19 Fe 10:00 WWWWWWW Sun, 20 Fe 10:00 WWWWWWW Sun, 20 Fe 10:00 WWWWWWW Sun, 20 Fe 10:00 WWWWWWW Mon, 21 Fe 10:00 Press QUICK when the Lirry sreen is isplye. 14:15 We, 16 Fe 1235 ITV Lonon ASTRA 19.2 E 10 July :30(01:30) USB HDD3 Remining Cpity: 86% (912.0GB) Press to selet Title Eit n press OK. The Softwre Keyor winow will pper. Input your esire title y using the softwre keyor (see pge 49). Press the GREEN utton to sve your settings. All Sort : New WWWWWW We, 16 Fe 10:00 WWWWWWWWWWWW We, 16 Fe 10:00 WWWWWWW Thu, 17 Fe 10:00 WWWWWWW Thu, 17 Fe 10:00 WWWWWWW Fri, 18 Fe 10:00 WWWWWWW Fri, 18 Fe 10:00 WWWWWWW Fri, 18 Fe 10:00 WWWWWWW St, 19 Fe 10:00 To insert hek mrk ginst ll the titles, press the YELLOW utton. To unhek ll the hek oxes, press the BLUE utton. NOTE: A hek mrk will not e inserte ginst protete titles. Note tht one elete, title nnot e restore. Press the RED utton. Selet Yes in the onfirmtion winow n press OK. All the titles with hek mrks will e elete. USB HDD pity You n hek the remining pity of the USB HDD using Remining Cpity. Thu, 17 Fe 10:00 Thu, 17 Fe 10:00 Fri, 18 Fe 10:00 Fri, 18 Fe 10:00 Fri, 18 Fe 10:00 St, 19 Fe 10:00 Sun, 20 Fe 10:00 Sun, 20 Fe 10:00 Sun, 20 Fe 10:00 Mon, 21 Fe 10: ITV Lonon ASTRA 19.2 E 10 July :30(01:30) USB HDD3 Remining Cpity: 86% (912.0GB) NOTE: The remining pity isplye is only guie; it is not gurntee. 55

56 You n set your preferenes for reoring. To selet USB HDD n Prtition for Reoring: Press n B / to highlight Options ion. Reoring Setup Press n B / to selet Reoring Setup n press OK. Press B / to selet Selet Devie n press OK. USB HDD n Prtition list will e pper. If USB HDD is prtitione y PC, severl prtitions will e isplye. < Reoring Setup Selet Devie One Touh Reoring Time TimeShift Size Strt Ping Time En Ping Time Devie Test Formt Devie 120 Minutes 4GB None None Selet USB HDD n Prtition you wnt to reoring. To set the reoring time for One Touh Reoring: To selet the TimeShift Size: In the Reoring Setup sreen, press B / to selet TimeShift Size. Press n B / to selet 512 MB, 1 GB, 2 GB or 4 GB n press OK. To use TimeShift reoring: Time Shift reoring llows you to puse live TV for fixe perio of time. For Exmple: If you move wy from the TV for short perio, suh s when the phone rings while you re wthing TV, you n esily puse live TV n then ontinue to view from the sme point in the progrmme when you return. Press W on the remote ontrol while viewing the DTV progrmme. The sreen will swith to still imge n reoring will strt utomtilly. The reoring time is eie y TimeShift Size. If the TimeShift file size rehes the limit set, then the TV will ontinue to e puse, ut the reoring uffer will e reset to the eginning. Press (ply). Cth-up viewing will strt from where the progrmme ws puse. Press v (stop) to stop the reoring. Press n B / to highlight Options ion. Press n B / to selet Reoring Setup n press OK. Press B / to selet One Touh Reoring Time n press n B / to selet the reoring time. < Reoring Setup Selet Devie One Touh Reoring Time TimeShift Size Strt Ping Time En Ping Time Devie Test Formt Devie 120 Minutes 4GB None None Progrmme En Time 30 Minutes 60 Minutes 90 Minutes 120 Minutes 150 Minutes 180 Minutes 210 Minutes 240 Minutes 270 Minutes 300 Minutes 330 Minutes You n set the Progrmme En Time in 30- minute inrements in the rnge of 30 minutes to 330 minutes. To set the ping time for progrmme reoring strt time n en time: In the Reoring Setup sreen, press B / to selet Strt Ping Time. Press C / to selet time. You n selet from None, 3 Minutes, 5 Minutes, 10 Minutes, 15 Minutes, 30 Minutes, n 45 Minutes. Reoring will strt t the selete numer of minutes prior to the reoring strt time. Press B / to selet En Ping Time. Press C / to selet time. You n selet from None, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, n 45 minutes. Reoring will en t the reoring en time plus the selete numer of minutes. 56

57 To perform USB HDD opertion test: In the Reoring Setup sreen, press B / to selet Devie Test n press OK. USB HDD opertion test will strt. Wit until the test ens. NOTE: The results of the evie test re only guie. The evie my not funtion s shown in the results. To formt USB HDD: In the Reoring Setup sreen, press B / to selet Formt Devie n press OK. Press C / to selet Yes in the onfirmtion winow tht will pper n press OK. Formtting will strt. Wit until formtting ens. NOTE: If the USB HDD is seprte severl prtitions y PC n multiple Prtition pper on the Devie List sreen, press B / to selet the Prtition you wnt to formt. When the USB HDD (or Prtition) is formtte, ll the t store on the USB HDD (or Prtition) will e elete. Sheuling priority If sheule time slots re next to eh other n there is more thn one minute etween the en time of the first sheule n the strt time of the next sheule, progrmme reoring will e performe orretly. When Strt Ping Time n En Ping Time re set (see pge 56), the strt time n en time will e the time plus the itionl minutes. If sheuling times overlp, priority will e given to the progrmme reoring whih strts first. When the progrmme reoring tht strte first ens, reoring will swith to the next sheule progrmme. At this time, epening on how fr the sheuling times overlp, the eginning setion of the next sheule progrmme my not e reore. Using the Clou TV Servie Toshi's universl portl for internet ontent n servies (servies re epenent on ountry). NOTE: You nee to onfigure home network efore using this feture (see pge 12). Press. The menu sreen of the Clou TV servie will pper. Press BC to selet Clou TV servie, n press OK. For the opertions of the Clou TV servie, refer to Clou Guie. Using We Browser The we rowser on this TV lets you explore everything the we hs to offer. Along with ess to populr ples, you'll e le to serh for n rowse your fvourite sites. NOTE: Certin servies my not e urrently ville in your re. Your registrtion or login my e require to use some servies. Thir prty internet servies re not provie y Toshi, my hnge or e isontinue t ny time n my e sujet to Internet servie provier restritions. Toshi mkes no wrrnties, representtions, or ssurnes out the ontent, vilility or funtionlity of thir-prty ontent or servies. Use of thir prty Internet servies my require the retion of seprte ount through omputer with Internet ess n/or pyment of one-time n/or reurring hrges n memership. Not ll thir prty servies my e ville on or omptile with this prout. In orer to experiene the full suggeste pilities of this prout, fullyomptile evies my e require. - oes not support pltform-epenent tehnologies suh s Ative X. - only supports preinstlle plug-ins. - my not support mei formts other thn the following: JPEG/PNG/GIF. - uses single uilt-in font. Some text my not e isplye s intene. - oes not support ownloing of files or fonts. - is TV rowser. It my work ifferently thn PC rowsers. - oes not support prentl ontrol or loks in the ontent, n it is the responsiility of the you to monitor rowser usge y minors. Some pges my not e isplye orretly or my isply ifferently on ifferent evies. Certin servies my not e ville in your re. 57

58 To use the we rowser NOTE: You n hnge the mouse moe (Mouse Emultion or Nvigtion) y pressing the GREEN utton on the remote ontrol when the we ontents sreen is open. Press on the remote ontrol n selet Internet ion to open the we rowser. Press BC to selet the URL ress r n press OK. Enter the esire URL ress y using the Softwre Keyor (pge 49). Press the GREEN utton on the remote ontrol. You n now rowse wesites on your TV using BC uttons on the remote ontrol. To A Fvourites Wesites By ing frequently visite wesites to Fvourites, you n rowse them esily. You n view the resses of the wesites you visite previously. Press on the remote ontrol n selet Internet ion to open the we rowser. Enter the esire URL ress y using the Softwre Keyor (pge 49). Press BC to sroll Fvourites STAR on the Toolr n press OK. Press OK to sve the esire wesite to your Fvourites. To rowse fvourite wesites Press on the remote ontrol n selet Internet ion to open the we rowser. Use BC to selet Fvourites STAR n press OK. Selet the item or folers to move to the esire URL ress n press OK. You n now rowse wesites on your TV using BC on the remote ontrol. PIP (Piture-in-piture) funtion When viewing the we rowser pge, urrently iring progrmmes or imges from externl inputs n e isplye in PIP winow (su-sreen). Press the RED utton while viewing the we rowser pge. The urrently iring progrm or imges from externl inputs re isplye in PIP winow. NOTE: The position of the PIP winow, n whether it is isplye or not n e set in the we rowser settings. PU n Pu uttons nnot e use when the PIP winow is isplye. Imges in the PIP winow nnot e isplye in 3D. Imges from 3D signls will not e isplye in the PIP winow. To stop isplying the PIP winow: Press the RED utton when the PIP winow is isplye. e Press BACK on the remote to return to rowsing your wesite. You n press the GREEN utton on the remote for thumnil view of ll your Fvourites. NOTE: The esire wesite is highlighte n isplye on the top row with the + ion. The + ion will hnge to pge ion fter the wesite hs een sve to Fvourites. 58

59 Using Skype Skype-rey Toshi TVs ring your fmily n friens loser to your home. Skype on your Toshi TV llows you to shre speil moments no mtter the istne. Before using Skype - Preprtion Connet the FREETALK HD Cmer: TALK-7291 to the TV s USB terminl. Do not use USB hu. For Skype-rey Toshi TV omptile mer, plese visit the following wesite: Arrnge the HD mer on top of the TV, ensuring it's in the entre. Connet to the network. Getting strte Press on the remote ontrol. Press BC to selet Skype ion n press OK. Welome to Skype sreen ppers. Welome to Skype Skype Nme Press [OK] Psswor Press [OK] Sign in when Skype strts Strt Skype when TV strts NOTE: The HD mer is sol seprtely. Do not onnet mer other thn the reommene HD mer. Using wireless network my result in egre ll qulity. Some of the fetures ville on other versions of Skype re not ville on the television. When using Skype, some funtions of the TV will not e ville. The soun settings re swithe to Skype moe. If you nnot her the person you're speking with, hek your TV volume. When Optil Digitl output or Anlogue output is use n you re signe in, the ring tone my not soun. The volume level on Skype my iffer from other fetures on your TV. When the Reset TV feture is use from the TV Menu, Skype informtion is reset to ftory efult settings. Sreenshots use in this mnul my iffer from the TV Menu, Skype will e reset to its ftory efult settings. No emergeny lls with Skype You n selet Skype nme from the Skype Nme rop own menu. Selet Sign in or Crete Aount. To rete new ount: If you o not lrey hve Skype ount, you n rete new one from your TV. Sign in Crete Aount Selet Crete Aount in the Welome to Skype sreen n press OK. Crete new Skype ount Full Nme 1~70 hrters Skype Nme 6 n 32 hrters Psswor 6~20 hrters Repet Psswor 6~20 hrters Emil Press [OK] Yes, sen me Skype news n speil offers. I hve re n ept. the Skype Terms of Use the Skype Privy Sttement Skype nnot e use for emergeny lls. I gree - rete ount Cnel Crete new Skype ount Full Nme 1~70 hrters Skype Nme 6 n 32 hrters! $ % ^ & * ( ) _ + Q W E R T Y U I O P { } Alt A S D F G H J K L ~ Z X C V B N M < >? Enter 59

60 Enter your Full Nme, Skype Nme, Psswor, Repet psswor, n Emil. If you wnt to reeive Skype news n speil offers, hek the seletion ox. Skype will inform users out new prouts, fetures n speil offers y emil. Selet I gree - rete n ount n press OK. You'll now e signe into your new ount. NOTE: Plese ensure tht you hve entere your emil ress orretly. It is require in se you lose or forget your psswor. If you forget your psswor, visit skype.om to retrieve it. If messge ppers informing you tht the entere Skype nme is lrey registere, plese hoose ifferent nme. To Sign into Skype: If you hve Skype ount, sign into Skype in the Welome to Skype sreen. Enter your Skype Nme n Psswor. Selet Sign in n press OK. If Sign in when Skype strts is heke, your ount will sign in utomtilly when you lunh Skype from the menu. If Strt Skype when TV strts is heke, your ount will sign in utomtilly when you turn on the TV. Both these options n e selete together. Bsi Opertion Press B / to selet t (Contts/People, Reent, Settings). Press n B / to selet ontt from the list. Your ontt list will ontin the following informtion: Contt nme / Current online sttus / Profile piture / Moo messge Your profile piture, sttus, Skype Nme, moo messge n ville Skype Creit. Nme - TextTextTextTextTextTextTextTextTextTextTextText Skype Creit Contts/People Nme Nme TextTextTextTextTextTextTextTextText Nme Nme TextTextTextTextTextTextTextTextText Nme Nme TextTextTextTextTextTextTextTextText Nme Nme TextTextTextTextTextTextTextTextText Sttus A Contt Exit T Sttus: Chnge your vilility sttus A Contt: A Skype ount or phone numer EXIT:Return to previous sreen. When t ontt list, the EXIT utton will lose Skype pplition without sign out. The urrent sttus for eh of your ontts re expline elow: : Online : Awy : Offline : Phone numer : Do not istur : Offline with voie messging or ll forwring enle Contts/People Press B / to selet Contts/People t. Press n B / to selet ontt. When pressing OK t eh ontt, the following funtions will pper: No loke onttor Nme - TextTextTextTextTextTextTextTextTextTextTextText Skype Creit Contts/People Nme Nme Nme Nme TextTextTextTextTextText Nme Nme Vieo ll Voie ll TextTextTextTextTextText Nme Nme View Profile TextTextTextTextTextText Sen Voie Messge Nme Nme Blok TextTextTextTextTextText Remove Sttus A Contt Exit Initite Vieo Cll Initite Voie Cll View Profile - View ontt profile (inluing Skype nme, full nme, irth te, gener, lotion, moile numer n emil). Sen Voie - Sen Voie Messge to ontt Messge Blok - Blok / unlok ontt Remove - Remove ontt from list 60

61 Vieo or Voie ll Press BC to selet Vieo ll or Voie ll, your sreen will now isply your ll s shown elow. Other sie Vieo ll Own sie Inoming ll Inoming lls on Skype will e isplye on the ottom right hn orner of your TV sreen. You'll lso her ring tone whih n e juste using the VOLUME uttons on your remote ontrol. Nme Inoming Cll... Vieo Voie Deline 06:34:45 xxxx Voie ll ABC DEF GHI JKL MNO PQRS TUV WXYZ You re given three options when n inoming ll rrives: Vieo : Answer y vieo ll. Voie : Answer y voie ll. Deline: Deline the inoming ll. NOTE: If other pplitions re tive or reoring, you'll only get n Inoming ll notifition until the pplition or reoring hs stoppe. Below is ll ion pitures in onverstion winow. Strt vieo Stop vieo Resume the ll Unmute the wem mi Mute the wem mi Norml size vieo Full sreen vieo Open il p En ll (Hng up the ll) + Sttus When you press the GREEN utton, the hnge sttus winow will pper s elow. You n hnge your sttus y pressing B / n OK. Press BACK to exit. Nme - TextTextTextTextTextTextTextTextTextTextTextText Skype Creit OnlineContts/People Nme Nme Awy TextTextTextTextTextTextTextTextText Do not istur Nme Nme Invisile TextTextTextTextTextTextTextTextText Nme Nme Sign Out TextTextTextTextTextTextTextTextText Nme Nme TextTextTextTextTextTextTextTextText Sttus A Contt Exit Group lls Using your Toshi TV, you n join Skype group voie n vieo lls. However, you n only sen n reeive uio whilst on these lls. NOTE: You must e invite on to group ll, you nnot initite it from the TV. 61

62 A Contt You n ontts to your list of ontts. When you press the YELLOW utton, the A Contt Type menu winow will pper. Nme - TextTextTextTextTextTextTextTextTextTextTextText Skype Creit Contts/People Nme Nme A Contt Type TextTextTextTextTextTextTextTextText Nme Nme Skype Contt TextTextTextTextTextTextTextTextText Nme NmePhone Numer TextTextTextTextTextTextTextTextText Nme Nme Exit TextTextTextTextTextTextTextTextText When you reeive ontt request, pop-up menu will pper where you n hoose to Aept, Blok or Deline the request. Press B / to selet n press OK. Request Form ms_ui john Exit Sttus A Contt Exit Two su-funtions re supporte. Press B / to selet Skype Contt or Phone Numer n press OK. Skype Contt Enter the Skype Nme of the person you're looking for. The serh result will show up fter get response from Skype server. Phone Numer You n lso enter phone numer in the serh winow. Contt Serh Results A Skype ontt Serh Result: (jkying) Full Nme Skype Nme Country A_0101 A_0101 USA B007 B007 UK C0709 C A01 HK D D D Tiwn Eeeeee_Eeee EE_Eeeee Jpn Ffffffffff_Fu Ffffffffff_Ff Tiwn Gggggg_Ggg Gggggg_Ggg Tiwn You n sen ontt request to person isplye in the serh results. Press B / to selet person n press OK. Bk Notifition of uthoriztion request Nme - TextTextTextTextTextTextTextTextTextTextTextText Skype Creit Contt List Nme Nme TextTextTextTextTextTextTextTextText Nme Nme TextTextTextTextTextTextTextTextText Nme Nme TextTextTextTextTextTextTextTextText Nme Nme TextTextTextTextTextTextTextTextText Notifition You hve reeive ontt request. Sttus OK Press C / utton to selet n press OK. ms_ui Hello! Plese me to your Contts. Aept Blok Deline Reent You n see list of pst events in Reent. Press B / to selet the Reent t. Press n B / to selet n item n press OK. Nme - TextTextTextTextTextTextTextTextTextTextTextText Skype Creit Reent Nme Nme Nme Nme Tue Jul 3 04:07: Durtion 00:10:00 Nme Nme Vieo ll Voie ll Tue Jul 3 03:44: Durtion 00:00:00 Nme Nme View Profile Mon Jul 2 10:01: Durtion 00:01:06 Sen Voie Messge Nme Nme Listen to Voie Messge A to Contts Mon Jul 2 06:36: Durtion 00:03:04 Delete This Item Nme Nme Tue Jun 28 03:30: Durtion 00:00:08 Press C / to selet Vieo ll or Voie ll. Eh ll hs n ion with it. The mening of eh ion is s follows: Ions Desription Inoming ll Outgoing ll Misse ll Unre Voie Messge Voie messge Sttus A Contt Exit 62

63 Diler You n ll moiles n lnlines from this sreen. Press B / to selet the Diler t. Press n B / to nvigte this sreen. Settings Press B / to selet the Settings t n press OK. The Settings winow will pper. Nme - TextTextTextTextTextTextTextTextTextTextTextText Skype Creit Diler Plese input the ountry oe -Selet One- User Profile Chnge Psswor Generl Settings Auio Settings Nme Nme (1/2) Gener -Selet One- Birth Dte (D) (M) (Y) Country/Region -Selet One- Tiwn +886 Tjikistn +992 Tnzni +255 Thiln +66 Timor-Leste +670 Privy Settings Bloke Contts Cll Settings Stte/Provine City Home Phone Offie Phone Press [OK] Press [OK] Press [OK] Press [OK] Togo +228 Aout Skype Moile Phone Press [OK] Sttus A Contt Exit Selet the ountry or region first, n then enter the phone numer with re oe. You'll nee little Skype Creit in your ount to ll moiles or lnlines using Skype. Emergeny lls over Skype re not supporte. You n hnge the following settings: User Profile A or hnge your personl informtion e.g. irth te, ountry/region or phone numer. Chnge Psswor You n hnge your psswor y entering your existing psswor n new psswor twie. Generl Settings Selet whether Skype shoul utomtilly strt when turning on the TV. Auio Settings Ajust the speker / ringtone volume mnully. The volume of your spekers will e ifferent on Skype ompre to your norml TV volume level. The speker volume rnge is % y 1 steps, n ringtone volume is % y 25 steps. Privy Settings Set who you llow lls from, whether it's Anyone or People in my Contt list only. Bloke Contts If you o not wnt someone to reh you, simply lok them y entering their Skype Nme or phone numer from this menu. Suessfully loke ontts re isplye in this winow. Cll Settings If you're not signe into Skype, you n forwr inoming lls to nother phone numer or Skype nme, or hoose to ept voie messges. However you'll nee to hve Skype Creit to turn this feture on. Aout Skype Displys informtion out Skype. Exit 63